BlueIOT (Beijing) Technology Co., Ltd E-mailinfo@blue-iot.com websitewww.blue-iot.com BlueIOT Anchor BA3000-t USER MANUAL V1.0 Contents 1. Overview 1.1. Product Introduction 1.2. Typical Applications 2. Panel and Port 2.1. Anchor Front Panel 2.2. Anchor Back Panel 3. Installation and Power Supply 3.1. Installation 3.2. Power Supply 4. Network Connection 4.1. Wired Network 4.2. Network Conguration 5. Data Collection 6. Important Safety Information for BlueIOT Anchor 7. Important Handling Information for BlueIOT Anchor 8. Disposal and Recycling Information for BlueIOT Anchor 9. Limited Warranty 10. IP Statement 11. Responsibility Statement 12. Appendix - Basic Specications 1 1 1 2 2 3 4 4 5 6 6 6 7 7 9 10 10 12 13 14 1.Overview 1.1. Product Introduction BA3000-t High Precision Indoor Bluetooth Location Anchor uses Bluetooth Low Energy
(BLE) technology with advanced AOA/AOD algorithm and standard, which can achieve functions such as precise locating, trace uploading and status collection of personnel and objects indoor, while having high accuracy, high concurrency, low power consumption, high compatibility and easy quick deployment, it is an effective solution for the demands arising from Internet of Things, for precise spatial and status perception as well as intelligent control and management. 1.2. Typical Applications The typical application scenarios and accuracies of this product are as follows:
Method 1: Star connection Multi-area space Method 2: Series connection Method 2: Series connection system Bluetooth AOA sub-meter level high precision locating system POE Ethernet data backhaul Locating engine Method 1: Star connection Smart terminals Monitoring terminals Corridor space Room space BlueIOT Anchor User Manual | 1 2. Panel and Port 2.1. Anchor Front Panel The diagram and meanings of the product front panel are as follows. 2.2. Anchor Back Panel The back panel of the Bluetooth AOA Location Anchor is used for installation and unmounting, as shown in below gure. RJ45 network port 1 Reset button Label area RJ45 network port 2 Network indicator Power Indicator Location indicator Number Meaning Status Description Number Meaning Status Description Green when connected through ethernet. Network Indicator Permanent OFF: no connection or connection failure. Permanent ON or Blinking: normal network connection. Power Indicator Permanent Green: normal power supply. Permanent OFF: abnormal power supply. 1 2 3 1 RJ45 Port Multiplexing port for POE power supply input or network transmission; can connect to a standard POE Switch. Reset Button When powered on, press and hold the button for 10 seconds, the anchor will reset to factory default settings and reboot. All indicators on the front panel ash three times during reset. 2 3 Location Indicator Permanent Green: no tag connection or tag connection failure. Flashing Green: normal tag connection. Label Area Product ID and information. 2 | BlueIOT Anchor User Manual BlueIOT Anchor User Manual | 3 3. Installation and Power Supply 3.1. Installation jammer, WiFi jammer) in the vicinity of the installation location. Avoid objects that can easily cause signal reection, such as large size metal, large This product is generally mounted on ceiling, but can also be suspended or installed screen. otherwise depending on the specic structure of the building ceiling. Before installation, The location anchor should have large visual coverage without obstruction. Never make sure that the connecting structure can withstand a downward pull of at least 50 install the location anchor above ceiling tiles (metal materiel like aluminum tile, or Newton (N). This product should be installed at a maximum height of 20 meters and can non-metallic material such as gypsum board and glass panel), low-voltage cable trays, be installed in method illustrated below:
re ducts, air conditioning ducts, indoor green plants or other obstructions. The location anchor should be installed in the correct direction with the front panel facing downwards instead of upright or tilted. 3.2. Power Supply This product adopts IEEE 802.3af standard version of POE power supply, uses Category 5e
(CAT 5e) network cable. Simply connect to a standard POE Switch or a location anchor to achieve power supply to the location anchor. When connected, the power indicator of the location anchor is green permanently. Note that:
The POE power supply should not be more than 100 meters away, and should preferably be controlled within 80 meters. Easy-to-use circuit breakers shall be incorporated into the wiring system Fix the location anchor mount with wall plug at specic positions (according to the technician's requirements), and then slide the anchor in place along the guideway on the mount. The location anchor collects and measures incoming tag signals, so the installation location and the surrounding should meet certain standards. Note that:
There should be no electromagnetic shielding/jamming devices (e.g. mobile phone 4 | BlueIOT Anchor User Manual BlueIOT Anchor User Manual | 5 4. Network Connection 4.1. Wired Network There are mainly two types of wiring methods between the location anchor and the server, as shown in Figure 4.1.1 and 4.1.2:
Network Cable 5. Data Collection The Bluetooth anchor is mainly used to receive and collect the locating and data information sent by the Bluetooth tag. Its effective collection area is related to the on-site deployment, and the number of tags that can be collected is related to the frequency of tag data transmission. When the tag leaves the effective collection area, the locating accuracy will be reduced or cannot be located, and the data information cannot be transmitted. When the tag Anchor Server returns to the effective collection area, the locating and data information transmission Figure 4.1.1 Directly Connect via Network Cable can be resumed. b le a o r k C e t w N N et w ork C a ble Switch or router Anchor Server Figure 4.1.2 Connect via Network Switch or Router 4.2. Network Conguration The location anchor uses xed IP address to access the network, and does not support DHCP function. The default factory IP address of the anchor is "192.168.1.X at port 48200. The afore X in the IP address changes with the product, which can be obtained from the information label on the product packaging. IP address: 192.168.1.11 Subnet mask: 255.255.255.0 Default gateway: 192.168.1.1 details. 6 | BlueIOT Anchor User Manual Specic parameters of the location anchor can be congured via the Anchor Congura-
tion module in the Server Software. Please refer to the related software manual for 6. Important Safety Information for BlueIOT Anchor WARNING: Failure to follow these safety instructions could result in re, electric shock, injury, or damage to BlueIOT Anchor or other property. Read all the safety information below before using BlueIOT Anchor. Handling Handle BlueIOT Anchor during transportation, installation and other cases with care. BlueIOT Anchor contains sensitive electronic components and can be damaged if dropped, burned, punctured, or crushed. Repairing Dont open BlueIOT Anchor and dont attempt to repair BlueIOT Anchor yourself. Disassembling BlueIOT Anchor may damage it, and may cause injury to you. If BlueIOT Anchor is damaged or malfunctions, contact local distributor for help. keep BlueIOT Anchor and the power adapter installed in a well-ventilated area. Using a BlueIOT Anchor power adaptor thats damaged, using a third-party selected powering solution which doesn't meet IEEE 802.3af POE or local safety regulation requirements, or powering BlueIOT Anchor when moisture is present, can cause re, electric shock, injury, or damage to BlueIOT Anchor or other property. Prolonged heat exposure BlueIOT Anchor complies with applicable surface tempera-
BlueIOT Anchor User Manual | 7 Modify the IP address of your computer before changing the network settings of the Powering BlueIOT Anchor uses IEEE 802.3af POE for power supply. Please use the location anchor so that it is in the same network segment as the anchor. It is recom-
original adapter or selected adapter that meets the above specications. Its important to mended that the computer's network be congured as:
ture standards and limits. BlueIOT Anchor will become warm when plugged in to a industrial chemicals, including near evaporating liquied gasses such as helium, may damage or impair BlueIOT Anchor functionality. Obey all signs and instructions. Radio frequency exposure BlueIOT Anchor uses radio signals to connect to Bluetooth Choking hazard Some BlueIOT Anchor parts may present a choking hazard to small Tags. BlueIOT Anchor has been tested and meets applicable limits for radio frequency children. Keep these parts away from small children. power source.
(RF) exposure. Radio frequency interference Observe signs and notices that prohibit or restrict the use 7. Important Handling Information for BlueIOT Anchor of electronic devices. Although BlueIOT Anchor is designed, tested, and manufactured to Exposure to liquid BlueIOT Anchor is not water resistant. Always avoid exposing BlueIOT comply with regulations governing radio frequency emissions, such emissions from Anchor to liquids and moisture. BlueIOT Anchor can negatively affect the operation of other electronic equipment, causing them to malfunction. Unplug the BlueIOT Anchor power adaptor and the POE cable when use is prohibited, or when asked to do so by authorities. Medical device interference BlueIOT Anchor contains components and radios that emit electromagnetic elds. These electromagnetic elds may interfere with medical devices, Cleaning and care Keep BlueIOT Anchor clean and dry, but avoid damaging BlueIOT Anchor. Observe the following:
Dont clean BlueIOT Anchor while its powering. Dont dry BlueIOT Anchor using any external heat source (for example, a hair dryer). such as pacemakers and debrillators. Consult your physician and medical device Dont use cleaning products, ultrasonic cleaners, or compressed air when cleaning manufacturer for information specic to your medical device and whether you need to your BlueIOT Anchor. maintain a safe distance of separation between your medical device and BlueIOT Anchor. Stop using BlueIOT Anchor if you suspect they are interfering with your medical device. Using buttons, connectors, and ports Never apply excessive pressure to a button on BlueIOT Anchor, or force a powering connector into a port, because this may cause Not a medical device BlueIOT Anchor is not a medical device and should not be used as damage that is not covered under the warranty. If the connector and port dont join with a substitute for professional medical judgment. It is not designed or intended for use in reasonable ease, they probably dont match. Check for obstructions and make sure that the diagnosis of disease or other conditions, or in the cure, mitigation, treatment, or the connector matches the port and that you have positioned the connector correctly in prevention of any condition or disease. Please consult your healthcare provider prior to relation to the port. making any decisions related to your health. Not an absolutely reliable equipment BlueIOT Anchor is not intended for use where the tures between -4F and 158F (-20C and 70C) and be stored in temperatures between failure of the device could lead to death, personal injury, disease transmission or severe
-40F and 185 F (-40C and 85C). BlueIOT Anchor can be damaged if stored or operated environmental damage. outside of these temperature ranges. Avoid exposing BlueIOT Anchor to dramatic Operating temperature BlueIOT Anchor is designed to work best in ambient tempera-
Explosive and other atmospheric conditions Powering on BlueIOT Anchor in any area changes in temperature or humidity. with a potentially explosive atmosphere, such as areas where the air contains high levels Indoor Use BlueIOT Anchor is designed for indoor use only. of ammable chemicals, vapors, or particles (such as grain, dust, or metal powders), may be hazardous. Exposing BlueIOT Anchor to environments having high concentrations of 6. Important Safety Information for BlueIOT Anchor WARNING: Failure to follow these safety instructions could result in re, electric shock, injury, or damage to BlueIOT Anchor or other property. Read all the safety information below before using BlueIOT Anchor. Handling Handle BlueIOT Anchor during transportation, installation and other cases with care. BlueIOT Anchor contains sensitive electronic components and can be damaged if dropped, burned, punctured, or crushed. Repairing Dont open BlueIOT Anchor and dont attempt to repair BlueIOT Anchor yourself. Disassembling BlueIOT Anchor may damage it, and may cause injury to you. If BlueIOT Anchor is damaged or malfunctions, contact local distributor for help. Powering BlueIOT Anchor uses IEEE 802.3af POE for power supply. Please use the original adapter or selected adapter that meets the above specications. Its important to keep BlueIOT Anchor and the power adapter installed in a well-ventilated area. Using a BlueIOT Anchor power adaptor thats damaged, using a third-party selected powering solution which doesn't meet IEEE 802.3af POE or local safety regulation requirements, or powering BlueIOT Anchor when moisture is present, can cause re, electric shock, injury, or damage to BlueIOT Anchor or other property. Prolonged heat exposure BlueIOT Anchor complies with applicable surface tempera-
ture standards and limits. BlueIOT Anchor will become warm when plugged in to a industrial chemicals, including near evaporating liquied gasses such as helium, may damage or impair BlueIOT Anchor functionality. Obey all signs and instructions. Radio frequency exposure BlueIOT Anchor uses radio signals to connect to Bluetooth Choking hazard Some BlueIOT Anchor parts may present a choking hazard to small Tags. BlueIOT Anchor has been tested and meets applicable limits for radio frequency children. Keep these parts away from small children. power source.
(RF) exposure. Radio frequency interference Observe signs and notices that prohibit or restrict the use 7. Important Handling Information for BlueIOT Anchor of electronic devices. Although BlueIOT Anchor is designed, tested, and manufactured to Exposure to liquid BlueIOT Anchor is not water resistant. Always avoid exposing BlueIOT comply with regulations governing radio frequency emissions, such emissions from Anchor to liquids and moisture. BlueIOT Anchor can negatively affect the operation of other electronic equipment, causing them to malfunction. Unplug the BlueIOT Anchor power adaptor and the POE cable when use is prohibited, or when asked to do so by authorities. Medical device interference BlueIOT Anchor contains components and radios that emit electromagnetic elds. These electromagnetic elds may interfere with medical devices, Cleaning and care Keep BlueIOT Anchor clean and dry, but avoid damaging BlueIOT Anchor. Observe the following:
Dont clean BlueIOT Anchor while its powering. Dont dry BlueIOT Anchor using any external heat source (for example, a hair dryer). such as pacemakers and debrillators. Consult your physician and medical device Dont use cleaning products, ultrasonic cleaners, or compressed air when cleaning manufacturer for information specic to your medical device and whether you need to your BlueIOT Anchor. maintain a safe distance of separation between your medical device and BlueIOT Anchor. Stop using BlueIOT Anchor if you suspect they are interfering with your medical device. Using buttons, connectors, and ports Never apply excessive pressure to a button on BlueIOT Anchor, or force a powering connector into a port, because this may cause Not a medical device BlueIOT Anchor is not a medical device and should not be used as damage that is not covered under the warranty. If the connector and port dont join with a substitute for professional medical judgment. It is not designed or intended for use in reasonable ease, they probably dont match. Check for obstructions and make sure that the diagnosis of disease or other conditions, or in the cure, mitigation, treatment, or the connector matches the port and that you have positioned the connector correctly in prevention of any condition or disease. Please consult your healthcare provider prior to relation to the port. making any decisions related to your health. Not an absolutely reliable equipment BlueIOT Anchor is not intended for use where the tures between -4F and 158F (-20C and 70C) and be stored in temperatures between failure of the device could lead to death, personal injury, disease transmission or severe
-40F and 185 F (-40C and 85C). BlueIOT Anchor can be damaged if stored or operated environmental damage. outside of these temperature ranges. Avoid exposing BlueIOT Anchor to dramatic Operating temperature BlueIOT Anchor is designed to work best in ambient tempera-
Explosive and other atmospheric conditions Powering on BlueIOT Anchor in any area changes in temperature or humidity. with a potentially explosive atmosphere, such as areas where the air contains high levels Indoor Use BlueIOT Anchor is designed for indoor use only. of ammable chemicals, vapors, or particles (such as grain, dust, or metal powders), may be hazardous. Exposing BlueIOT Anchor to environments having high concentrations of 8 | BlueIOT Anchor User Manual BlueIOT Anchor User Manual | 9 8. Disposal and Recycling Information for BlueIOT Anchor BlueIOT Anchor disposal and recycling Your BlueIOT Anchor should not be disposed of with household waste. Dispose of your BlueIOT Anchor in accordance with local environmental laws and guidelines.
(which may result from use, misuse, don't know how to use or product defects). The seller reserves the right to overhaul or replace (new products or newly overhauled replacement products) device or software. This is the sole and exclusive remedy for any breach of the warranty terms. Please consult your local seller's authorized seller when applying for product reaches its end of life, take it to a collection point designated by local authorities. Accessories (e.g. adapter, charging cable) No warranty warranty service. Warranty card Product name (including spare parts) Limited warranty period BlueIOT Anchor (as entire product) 1 year
*Non-human factors, one-year warranty period; the cost of logistics (shipment) shall be borne by the users. Note: If your device is purchased through a local seller, please contact the local seller for the warranty service acquisition method. If your device was purchased directly by the manufacturer, please get in touch via: info@blue-iot.com. Disclaimer: Depending on the design of usage location / environment and the way how it is used, there could be false positives due to tissue, walls, structures or other factors and false negatives due to bodily interference, electromagnetic interference, or other factors. European UnionDisposal Information The symbol above means that according to local laws and regulations your product and/or its battery shall be disposed of separately from household waste. When this The separate collection and recycling of your product and/or its battery at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. 9. Limited Warranty Warranty does not apply to:
Surface damage, such as scratches, dents and depressions. Damage caused by accident, abuse, misuse, inow, ooding, re or external factors. written consent. In addition, the seller reserves the right to refuse the warranty application for products or services obtained and/or used in violation of the laws of any country. This warranty provides you with specic legal rights, but this right may vary from region to region. The seller will not be responsible for any accidental, special, indirect or derivative damage Damage caused from repairing by non-BlueIOT authorized warranty personnel. BlueIOT warranties that the BlueIOT Anchor performs to the requirements listed on the Damage caused by modication or alteration of the product without the seller's BlueIOT Anchor specsheet.Allsalesarenal. 10 | BlueIOT Anchor User Manual BlueIOT Anchor User Manual | 11 10. IP Statement Trademark statement BlueIOT(Beijing) Technology Co., Ltd. Liability statement
"BlueIOT" trademarks, logos, and trademark combinations are registered trademarks of To the maximum extent allowed by law, the products (including hardware, software, etc.) described in this manual are provided "as is", there may be defects, errors or malfunctions, the company does not provide any form of express or implied warranty, The "BlueIOT"
series of products (hereinafter referred to as "equipment") provided by our company are management aids, which cannot replace the safety management system, measures and rescue programs of dangerous operations, nor can they replace the supervision system in operation management and measures. During the use of this product, please remind the operator not to reduce safety aware-
ness due to the use of auxiliary tools, timely charge the device when the device is low, and regularly check the device. If you have any questions, please contact our company for repair or replacement. 11. Responsibility Statement The product is an auxiliary tool, which cannot replace any safety management system, measure and rescue solution for hazardous operation or supervision system and measure for operation management. Please do not reduce safety awareness while using the product, and timely charge the product and check its operation state when the power is low. Measurement data and results of this product are for reference only. Products described in the Manual (including hardware and software) are all provided in the
"current situation" within the maximum range allowed by laws, and there may exist defects, errors or faults. The Company does not provide express or implied guarantee in any form, or compensate for any special, incidental, accidental or indirect damages caused by using the Manual or products of the Company. The Company does not undertake any responsibility for any damage to personal or property interests of one's own or third party caused by failing to use the product according to the Manual and warning statement. The Company does not undertake any responsibility for any product operation abnormality, information disclosure or other problems caused by network attack, hacker virus infection or other unknown risks due to Internet access during product use. The product promoting pictures and advertisements are used only for instruction and promotion. Physical products prevail in all cases. The data in the Manual are all theoretical values obtained by the internal lab of BlueIOT in specic testing environments. However, there may exist differences due to individual product differences, software version, using conditions and different environmental factors, and actual using conditions shall prevail in all cases. The Company will not send special notice in the case of being necessary to modify and adjust the above. For more information, please contact info@blue-iot.com. 12 | BlueIOT Anchor User Manual BlueIOT Anchor User Manual | 13 12. Appendix - Basic Specications BA3000-t BlueIOT Anchor Frequency 2.4GHz - 2.485GHz Up to 0.1 m Ethernet RJ45 10/100Mbps UDP/TCP 620g 48V / 0.5A
-20C - 70C
-40C - 85C Interface Connect Distance Maximum 100m Transmission medium CAT5+
220mm220mm32mm Power Supply Interface IEEE 802.3af POE Working humidity 10% - 90% non condensing Storage humidity 5% - 95% non condensing Locating Accuracy Interface Type Interface Speed Interface Protocol Dimensions Weight Voltage / Current Working temperature Storage temperature 14 | BlueIOT Anchor User Manual This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment The devices has been evaluated to meet general RF exposure requirement the device can be used in portable exposure condition without restriction
`a _