FCC ID: 2AZOM-BT2000Z Blueiot RTLS Tag

Blueiot RTLS Tag BT2000-z User Manual V1.0 BlueIOT (Beijing) Technology Co., Ltd http://www.blueiot.com/

Email: global@blueiot.com Copyright 2020 BlueIOT (Beijing) Technology Co., Ltd. All rights reserved. Any part of this manual, including text, pictures, graphics, etc., belongs to BlueIOT (Beijing) Technology Co., Ltd. Without written permission, any unit or individual may not extract, copy, translate, or modify this manual in whole or in part by any means. Unless otherwise agreed, the company makes no representations or warranties of any kind, express or implied, with respect to this manual. Trademark statement

"BlueIOT" trademarks, logos, and trademark combinations are registered trademarks of BlueIOT

(Beijing) Technology Co., Ltd. Products described in the Manual (including hardware and software) are all provided in the

"current situation" within the maximum range allowed by laws, and there may exist defects, errors or faults. The Company does not provide express or implied guarantee in any form, or compensate for any special, incidental, accidental or indirect damages caused by using the Manual or products of the Company. The Company reserves the right to modify and adjust the product design or specifications and will not send special notice in the case of being necessary to modify and adjust the design, functions or technical indicators due to technological development. The "BlueIOT" series of products (hereinafter referred to as "equipment") provided by our company are management aids, which cannot replace the safety management system, measures and rescue programs of dangerous operations, nor can they replace the supervision system in operation management and measures. During the use of this product, please remind the operator not to reduce safety awareness due to the use of auxiliary tools, timely charge the device when the device is low, and regularly check the device. If you have any questions, please contact our company for repair or replacement. 1. Tag Introduction BT2000-z asset tag is mainly used for the positioning of vehicles, large assets, equipment and so on. It is compact in appearance and easy to operate.With high precision, low power consumption and other characteristics, can be long standby, and the protection level has reached IP67, suitable for harsh industrial scene environment. 2. Screen Display BT2000-z asset tag uses ER14250 battery, when using, it should be noted that the tag should be in a state of power.The LED indicator on the tag flashes every 5 seconds, indicating the current battery. When the flashing color is green, the power is sufficient, the yellow is medium, and the red is about to run out, and the battery needs to be replaced as soon as possible. When the power supply of the tag is insufficient, the low power alarm message will be uploaded. After the alarm is in effect, the LED indicator of the tag will flash in orange, indicating that it is currently in a low power alarm state. 2.1 Battery Replacement When replacing the battery, you should first remove the back cover of the battery, remove the old battery, put it into the new battery, tighten the back cover and glue the pad, as shown in the following figure. 3 Warning: please replace the battery after training. BT2000-z uses two ER14250 batteries to supply power in parallel. All batteries should be in the same direction. It is strictly forbidden to put batteries at will regardless of battery polarity. Incorrect use of battery polarity may cause batteries to charge each other and cause explosion! It is strictly forbidden to mix new and old batteries!

2.2 Installation According to the requirements of this product can be installed by magnetic, strapping or paste.The battery percentage icon in the status bar indicates the usage of power as follows. the actual use scene, Magnetic Installation: when the surface of the located device is magnetophilic, the tag can be directly attached to the surface of the equipment. Strapping Installation: when the equipment is tubular or non-magnetic, the strap (to be purchased by yourself) can be used to pass through the special slot of the tag and tied together with the designated equipment. 2.3 Hand Out/Back To hand out tags, use a card reader to enter the tag ID into the locating system or do it manually, and then location data will be recorded. To hand back, use a card reader to remove the tag ID or do it manually, and then location data will no longer be recorded. 3. Work Mode 3.1 Normal Mode A tag in the normal mode automatically enters the mode of locating. In this mode, the tag sends a locating signal to the BlueIOT anchor at a default refresh interval of 200 milliseconds. This value can be set on the service configuration software. 3.2 Sleep Mode A tag in the sleep mode will enter a low power consumption status where the refresh interval for the tag to send locating signals to the anchor will be extended to 10 seconds. When the tag stays static for a time longer than the set value for inactivity, it will automatically switch to the sleep mode; when the tag moves or vibrates, it will immediately get back to the normal mode from the sleep mode. The static time from normal mode to sleep mode is 15 seconds by default, and this value can be set from 1 4 to 180 seconds in the Server Management Software. 4. Notes Do not throw this product into the fire in case of explosion.Do not dismantle the shell of this product at will in case of injury. This product uses disposable lithium battery.Replacing the battery requires professional training.Replacing the battery without training may lead to waterproof failure. The waterproof grade of this product is IP68. The product can be normally exposed to rain or water, but not with long immersion. The parameter data come from BlueIOT Lab, and may vary according to individual differences, usage habits and environmental factors in actual use. Please refer to the actual use. If the equipment is working abnormally, please contact the manufacturer and do not disassemble or modify the equipment in any way. 5. FCC Warning statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and ca n radiate radio frequency energy and, if not installed and used in accordance with the instruction s, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfe rence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following meas ures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept an y interference received, including interference that may cause undesired operation Information to user.Any Changes or modifications not expresslyapproved by the party 5 responsible forcompliance could void the user's authority tooperate the equipment. FCC RF Radiation Exposure Statement:

This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. 6. Specifications Product NameBlueiot RTLS Tag Product ModelBT2000-z Net Weight72g Size42mm42mm40mm IP ClassIP67 Frequency Band2.4GHz - 2.4835GHz Operating Temperature-20 - 70 Storage Temperature-40 - 85 Operating Humidity10% - 90% non-condensing Storage Humidity5% - 95% non-condensing Radio Frequency IdentificationBuilt-in RFID Warranty Information The warranty period for the host of this product is one year from the date of purchase, during which Blueiot after-sale experts will be responsible for the maintenance under normal use. Warranty does not apply to 1Damage caused by unauthorized repairing, misuse, collision, negligence, abuse, inflow, accident or modification or alteration. 6 2Damage caused by improper use of accessories not for this product. 3Man-made surface damage, such as scratches, dents and hollows. 4Damage caused by force majeure. 7

Blueiot RTLS Tag Model: BT2000-z FCC ID: 2AZOM-BT2000Z Fe Blueiot (Beijing) Technology Co., Ltd.

Blueiot (Beijing) Technology Co., Ltd. Agent Authorization Company:Blueiot (Beijing) Technology Co., Ltd. Address:10/F, Tower A, TusPark Innovation Plaza, Haidian District, Beijing, China Product Name:Blueiot RTLS Tag Model Number(s):BT2000-z Product Description:Blueiot RTLS Tag have Bluetooth wireless capabilities We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: |; }ild/ Date: 2022.11.4 Name: Liu Jida Title: Manager Company: _Blueiot (Beijing) Technology Co., Ltd.

Blueiot (Beijing) Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2022.11.4 Subject; Request for Confidentiality FCC ID: 2AZOM-BT2000Z To Whom It May Concern, Pursuant to the provisions of the Commission's rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market.

& Schematic Diagram

&] Block Diagram Parts List XX] Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

&] External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 DO1. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: jw) dw Name: Liu Jida Title: Manager