FCC INFORMATION The Federal Communication Commission Radio Frequency Interference Statement includes the following paragraph:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication. However, there is no grantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. The user should not modify or change this equipment without written approval from Bluetake Technology Co., Ltd. Modification could void authority to use this equipment. In some countries, there may be restrictions on using Bluetooth devices. Please check with your local authorities for more details. 2
- Content -
Product Introduction...............................4 Package Contents4 Overview..5 Charging Your Headset...7 Turn ON/OFF Your Headset......8 Using Your Headset for the first time.....9 Pair Your Headset and Cell Phone....10 Wearing Your Headset with Best Performance....10 Another Ear Use....11 Using Your Headset.11 3
- Product Introduction -
Gain more freedom with the novel Bluetooth Headset BT400 G5 while youre out for an amble or in for a meeting. The imperceptible wireless connection is reach to 10 meters and needs no any line of sight of your mobile phone, free your hands. Moderate talk and standby time add to the easy and pleasurable experience. A flexible ear hook which not only provides wear elasticity but also gives a cosy wear experience, additionally the sturdy conjunction makes the BT400 G5 stays in the place even when youre in motion.
- Mobile Phone Compatibility The headset is compatible to most Bluetooth mobile phones that support Bluetooth Headset and/or Hands-Free profile(s). Please make sure that your Bluetooth mobile phone has Bluetooth function by either visiting the phone manufacturers website or consulting the store that you purchased the phone.
- Package Contents -
. Bluetooth Headset
. AC/DC Power Adapter
. User Guide x1 x1 x1 4
- Overview -
The headset includes several parts:
Talk/Transfer Button: The button is used for 2 functions.
- Talk
: Answers or ends the call.
- Transfer
: switches an active call between the headset and the cell phone.
Indicator LED: Displays the current status of the headset.
- Blue Blinking: the headset is in normal status.
- Red Blinking: the headset is in low power status.
- Blue & Red Blinking: the headset is in pairing mode.
Power/Mute Button: The button is used for 2 functions.
- Power
- Mute
: Switches the headset on and off.
: muting an ongoing call.
Ear hook: Attaches headset to ear.
Speaker: Plays the sound you receive on the call.
Axis
Microphone: Picks up your voice.
Volume Up Button: Increases the volume.
Charger Connector
Volume Down Button: Decreases the volume. 5
- Headset Operations -
Function Corresponding Button Action Power on /
Power off
< POWER/MUTE >
button Enter pairing mode < POWER/MUTE >
button To power on, press and hold the button for 6 seconds, the indicator LED blinks BLUE. To power off, press and hold the button for 2 seconds, the indicator LED blinks RED twice and then snuffs out. Make sure the headset is powered off. Press and hold the button for 8 seconds, the indicator LED blinks BLUE and RED. Make a voice dial call
< TALK/TRANSFER >
button When no call is in progress, briefly press the button once, then you will hear a tone that indicates you to say voice tag. Receive a call /
End a call
< TALK/TRANSFER >
button To receive a call, press the button once; To end a call, press the button once again. Transfer call from Headset to Phone
< TALK/TRANSFER >
button To switch a call from headset to cell phone, press the button for 2 seconds *. Mute /
Unmute
< POWER/MUTE >
button This function is only for ongoing call. When theres a call is in progress, press the button once to activate mute function. Press the button again to deactivate the mute. Increase volume
< > button Press the button to increase the volume. Decrease volume
< > button Press the button to decrease the volume.
*: Not all Bluetooth phones support transfer function, please refer to your phones users manual to make sure whether your phone supports this feature. 6
- Charging Your Headset Before using your headset at the first time, its highly recommended to charge its self-contained battery for at lease 2 hours. A fully charged headset battery provides approximately 5 hours talking time and 250 hours standby time(In standby mode, the headset is powered on but no call is in progress). The headset indicator LED displays BLUE when the headset power is sufficient. When the headset is running out of power, the headset indicator starts to blink RED. Please follow below steps to charge the headset battery:
Step 1 > Plug the charger cable into the headset. Step 2 > Plug the other end of the charger into an electrical outlet. Step 3 > When the charging is complete. Disconnect the charger from the electrical outlet and NOTICE1: During the charging, the headset indicator LED turns to RED color. NOTICE2: The headset needs approximately 2 hours to be fully charged. detach the charger from the headset. NOTICE3: The headset indicator LED turns to BLUE color when the charging is complete. When disconnecting the power cord of any device, you should grip and pull the plug, but not the cord. 7 Battery Notice!
1. Over extended periods of time, battery gradually wears down and requires longer charging time. The situation is normal. Additionally, the more you talk on the phone with the headset, the less standby time your battery has. 2. Risk of explosion if battery is replaced by incorrect type or is thrown into fire. 3. Do not store the headset in hot areas. High temperatures can shorten the life of internal electronic components, damage battery, and warp or melt certain plastics. 4. Do not store the headset in cold areas. When it warms up to the normal temperature, moisture can form inside, which may damage internal electronic circuit board. Charger Notice!
Use only chargers approved by Bluetake for use with this product. The use of any other types will invalidate any approval or warranty applying to the product, and may cause unexpected damage. For availability of approval chargers, please check with your local dealer.
- Turn ON/OFF Your Headset -
Press and hold the < POWER/MUTE > button for 5 seconds, and then the headset will emit two high tones. When the power is ON, the indicator LED starts to blink BLUE color.
(NOTICE: the headset will enter pairing mode if you press and hold the <
POWER/MUTE > button for 7 seconds from OFF status.) To turn off the headset, press and hold the < POWER/MUTE >
button for 2 seconds then the headset will emit two high tones and the indicator LED displays RED color briefly. 8
- Using Your Headset for the first time 1. Charge the headset for at least 2 hours to make sure the headset is fully charged. 2. Make sure that your phone is powered on. 3. Power on the headset. 4. Configure your phones Bluetooth function and make sure its activated. 5. Set the phone to search for Bluetooth devices, the phone searches for all Bluetooth devices within about 10 meters and then displays them as a list. 6. Pair the headset with your phone. 7. Start using the headset when the pairing progress is complete successfully. 9
- Pair Your Headset and Cell Phone -
NOTICE!! You must pair the headset with a Bluetooth phone before you can use the headset!
Step 1 > Please make sure the headset is turned OFF. Step 2 > Press and hold the < POWER/MUTE > button approximately 7 seconds until the headset indicator LED starts to blink BLUE and RED color. Step 3 > Release the < POWER/MUTE > button when the indicator LED is flashing Step 4 > Follow the operating instruction for your Bluetooth phone to start a pairing progress. Step 5 > The phones display will indicate that it found one or more Bluetooth devices, the BT400 G5 should be included in the list, please select it for pairing. Step 6 > The phones display then prompts you for a pairing passkey or PIN, please enter four zeros 0000. Step 7 > When the pairing progress is completed successfully, the headset indicator LED will return to normal status of blinking BLUE. Step 8 > Some phones display may ask you whether you want to change the headsets name;
you can replace the BT400 G5 with any name you prefer.
- Wearing Your Headset with Best Performance -
For optimal performance, wear the headset and your Bluetooth mobile phone on the same side of your body. In regular situation, the sound performance is excellent when theres no any obstruction between the headset and the Bluetooth mobile phone. 10
- Another Ear Use -
The ear hook wear can be easily changed for another ear by below four steps:
Step 1 & Step 2 : Hold the side of ear hook that is close to the axis of the headset, and then revolve the ear hook to 90 degrees twice. The ear hook will give out a clear sound while its in 90 degrees position. Step 3 & Step 4 : Rotate the ear hook to another side of the headset.
- Using Your Headset -
[ Answering a call ]
After being paired to your phone, the headset is now ready to receive incoming calls without handling the phone. When theres an incoming call, both the cell phone and the headset will ring simultaneously. Upon hearing the ring tones through the headsets speaker you can answer the incoming call by pressing < TALK/TRANSFER > button and then speaking normally.
[ Ending a call ]
You can use either of the ways to end a call:
1. Press the headsets < TALK/TRANSFER > button to end a call. 2. Press the phones keypad to end a call(Please consult your phone users manual). 11
[ Making a call ]
There are two ways to make a call:
1. Using the phones keypad:
As general usage, dial the phone number you want to call by pressing the phones designated keypad. You may also hear the dialing tones through the headset. 2. Using the Voice Dialing through the headset:
What is voice dialing?
Voice dialing is a feature on some Bluetooth phones which allows you make calls by saying the name of the person you want to call. The phone compares your voice with your previous recording (called a voice tag). If they match then the phone will automatically dial the corresponding phone number. NOTICE! Not all Bluetooth phones support voice dialing, please refer to your phones users manual to make sure whether your phone supports this feature.
[ Voice dialing ]
The headset does not have a keyboard so its convenient to use voice dialing function to make calls. To do this you have to record voice tags for the contacts in your phone address book. If your phone supports voice function, you can use this feature with the headset easily. Note that the voice dialing on your phone must be enabled and the voice tags must have been recorded previously. (Please refer to your phones instruction on voice recording and storing voice tags.) NOTICE! Not all Bluetooth phones support voice dialing, please refer to your phones user manual to make sure whether your cell phone supports voice dialing. 1. Briefly press the < TALK/TRANSFER > button once. 2. After the tone, say the name of the person you want to call. The phone number will be dialed automatically by phone after recognizing the correct voice tag. 12
[ Mute ]
This function is available for ongoing call only. To activate mute function: Press the < POWER/MUTE > button once while theres an ongoing call is in progress. To deactivate mute function: Press the < POWER/MUTE > button to release the mute.
[ Transfer ]
To activate transfer function: Press the < TALK/TRANSFER > button for 2 seconds to switch the current call from headset to cell phone. NOTICE! Not all Bluetooth phones support transfer function, please refer to your phones users manual to make sure whether your phone supports this feature.
[ Multi-Pairing ]
BT400 G5 supports a particular function Multi-Pairing. It allows the headset to be paired with several Bluetooth devices but connected to only one device at a time. The only one basis for multi-pairing is that the last paired device has the highest priority than others. 13 14