FCC ID: SL6KEYFOB KeyFob

BEEKs KEYFOB USER GUIDE Document Version: 1 Product ID: BEEKSKF September 2017 Copyright 2007-2019 Bluvision/HID Global Corporation/ASSA ABLOY AB. All rights reserved. This document may not be reproduced, disseminated or republished in any form without the prior written permission of HID Global Corporation. Trademarks Bluvision, HID GLOBAL, HID, the HID logo are trademarks or registered trademarks of HID Global Corporation, or its licensors, in the U.S. and other countries. Contacts For additional offices around the world, see www.hidglobal.com corporate offices. HID Americas and Corporate Europe, Middle East and Africa (EMEA) 611 Center Ridge Drive Austin, TX 78753 USA Phone: 866 607 7339 Fax:

949 732 2120 Asia Pacific 19/F 625 Kings Road North Point, Island East Hong Kong Phone: 852 3160 9833 Fax:

852 3160 4809 Haverhill Business Park Phoenix Road Haverhill, Suffolk CB9 7AE England Phone: 44 (0) 1440 711 822 Fax:44 (0) 1440 714 840 Bluvision 600 Corporate Dr Suite 410 Fort Lauderdale, FL 33334 USA Phone: 1-866-777-7210 Bluvision Customer Support: bluvision.com HID Global Customer Support: support.hidglobal.com Links in this Document Hyper Links are displayed in italic text. Web Links are in underlined blue. USER GUIDE Getting Started The Bluvision BEEKs CM User Guide covers the basics of the equipment setup and provisioning of equipment with Bluzone Cloud account and project. For a more in-depth explanation, see Bluvision Developer web site https://bluvision.atlassian.net/wiki/spaces/PDP/pages/13041816/04.+How-to+Setup+BEEKs CMs Prerequisites This equipment requires the steps below be followed prior to provisioning your BEEKs CM device. These prerequisites are NOT covered within the installation guide below. Please complete the following steps prior to provisioning of your BEEKs CM device. This equipment requires the user to have a registered Bluzone account at the website https://bluzone.io Bluzone registration instructions are located at https://bluvision.atlassian.net/wiki/spaces/PDP/pages/6914122/Getting+Up+And+Running This equipment also requires a user have a BEEKs CM WiFi template setup and configured within Bluzone. Instructions for setting up a BEEKs CM WiFi template are located at:

https://bluvision.atlassian.net/wiki/spaces/PDP/pages/6914122/Getting+Up+And+Running#Gettin gUpAndRunning-ConfiguringBEEKs CMWiFiprofiles o o o Application/Service/Profile iBeacon support sBeacon support Eddystone support Fully open and easily configurable for 3rd party beacon protocol How-to Provision BEEKs CMs This will guide you through provisioning your BEEKs CM of your Bluzone Account and assigned project. Step-by-step provisioning guide There are 2 steps to the provisioning process:

1. Download Bluzone Application from Apple App Store. 2. Physically provisioning BEEKs CM using the Bluzone App. This requires BLE be enabled on device. Provisioning Step 1: Download Bluzone Mobile Application You can use the free Bluzone app with any compatible device, including:

Bluzone app (iOS) - iPhone, iPad and iPod touch running iOS 7.0 or later; certain features may require later versions. Touch the App Store button on your iPhone, iPod touch or iPad to download the free Bluzone app, or download the application from iTunes. (If you download from iTunes, you will need to sync before you see the Bluzone logo display on your device.) Provisioning Step 2 - Provisioning of a BEEKs CM using Bluzone Mobile Application Provisioning Steps Step 2 - Launch the Bluzone app on your iOS device Step 2.1 Sign In - Sign in using your Bluzone accounts registered username and password Step 2.2 Select Provision Action Click Provision located at bottom of screen Step 2.3 Select BEEKs CM Provisioning Click / Select BEEKs CM within option menu. Step 2.4 Select Your BEEKs CM Select the closest BEEKs CM device from all BEEKs CM devices in range of mobile phone. Please make sure you are within 1 meter of device. The BEEKs CM Icons green color indicates the relative proximity to BEEKs CM device. The greener color displayed, the closer you are to BEEKs CM device. Step 2.5 WiFi Template - Choose appropriate BEEKs CM template. If this list is empty, please complete the required prerequisite step of creating BEEKs CM WiFi template on https://bluzone.io in your assigned project. Step 2.6 BEEKs CM Location - Next you will be prompted to select/assign the physical geo location of the BEEKs CM where it is being physically installed. Location is assigned by GPS and can be changed manually by dragging the pin in order to be more accurate. Drag the pin by holding your finger on pin located in center of screen and dragging to appropriate location. Step 2.7 BEEKs CM Selfie - Next you will be prompted to take a picture of the BEEKs CM. This is called a Selfie within Bluzone application. This is an optional step and is recommended so that others can easily identify the location of the BEEKs CM after deployment Step 2.8 BEEKs CM Profile - Next you will be prompted to enter a name for the BEEKs CM. You may keep the default name but it is recommended to choose a unique name that is meaningful to you. At this time you may also add Tags from the template, or create new ones if needed. Important: Click Provision after entering the information will submit provisioning request to Bluzone Cloud Step 2.9 Provision Request Please wait for provisioning process to complete. This will be indicated using progress indicator / spinner located on screen. Congratulations, you have provisioned you first Bluvision BEEKs CM on Bluzone.io FCC Statement:

This equipment has been tested and found to comply with the limits for a Class A/B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1) lappareil ne doit pas produire de brouillage;

2) lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. CAN ICES-3 (B)/NMB-3(B)

600 Corporate Dr, Suite 300 Fort Lauderdale FL, 33334 October 1, 2019 TUV SUD America Inc. 10 Centennial Drive Peabody, MA 01960, USA Dear Sir or Madam, We, Bluvision Inc., 600 Corporate Drive, Ste 410, Fort Lauderdale, FL 33334, hereby authorize Marlene Sealey of TUV SUD America, 10040 Mesa Rim Road, San Diego, CA, 92121 and Efren Gonzalez of Bluvision Inc., 600 Corporate Drive, Ste 300, Fort Lauderdale, FL 33334 to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. Yours sincerely, Name:

Title:

Company:

Matthew Johnson CTO Bluvision Inc

COMPANY LETTERHEAD October 1, 2019 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Confidentiality Request FCC ID: SL6KEYFOB Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commissions Rules, Bluvision Inc., hereby requests permanent confidential treatment of information accompanying this application as outlined below:

Schematics Bill of Materials/Parts List Block Diagrams Theory of Operation The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Name:

Marlene Sealey On behalf of Bluvision Inc