FCC Caution. 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subj ect to the following two conditions: (1) This device may not cause ha rmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. Any Changes or modifications not expressly approved by the party resp onsible for compliance could void the user's authority to operate the equipment. 15.105 Information to the user. Note: This equipment has been tested and found to comply with the lim its for a Class B digital device, pursuant to part 15 of the FCC Rule s. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment g enerates uses and can radiate radio frequency energy and, if not inst alled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If th is equipment does cause harmful interference to radio or television r eception, which can be determined by turning the equipment off and on
, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from tha t to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. WIRELESS MICROPHONE SYSTEM OPERATING INSTRUCTIONS AMERICAN STARPOWER X2 I N T R O D U C T I O N Congratulations on your purchase. The Nady American Starpower X2 is the perfect high performance entry-level wireless, with all the advantages of dual wireless microphone operation without cumbersome cords. Delivering clear, high-fidelity audio simultaneously from two microphones, the American Starpower X2 can be used for a broad range of home recreational wireless singing and speaking applications. All the advantages and freedom of wireless operation (without cumbersome cords) Easy to use simply plug into your sound system High performance audio perfect for karaoke/recreational singers, DJ's, and many other applications VHF operation for reliable, interference-free performance 100+ feet typical operating range up to 200+ feet line-of-sight S Y S T E M F E AT U R E S DUAL RECEIVER Controls and connections for easy operation include front panel power ON/OFF switch, Power ON LED indicator, LED signal-received indicators for each channel, back panel 1/4 audio output jack (both channels mixed together), AC/DC power adapter, and dual fold-down retractable antennas HANDHELD MICROPHONE TRANSMITTERS Easy, convenient operation with OFF/STANDBY/ON switch and transmitter ON LED Features a unidirectional dynamic cartridge for high audio performance with minimal feedback Operate up to 15 hours on a single 9V alkaline battery OPERATION
(1)
(3)
(3)
(4)
(7)
(5)
(7)
(6)
(2) R E C E I V E R 1. Plug the attached AC/DC ADAPTER (1) into the DC JACK (2) and into an empty wall outlet 2. Rotate and extend ANTENNAS (3) fully, angled at 60 position as shown 3. Switch the POWER (4) to the ON position. The POWER ON LED (5) will now light up and the receiver is operational 4. The 1/4 AUDIO OUTPUT JACK (6) provides a fixed, unbalanced MIC level audio output for connection to your mixer or home stereo microphone input jack with the 1/4 to 1/4 or 1/4 to RCA audio cables supplied. As when making any connection, make sure the connected equipments volume is at the minimum level before plugging in the receiver to avoid possible sound system damage
[Note: this output is the sum audio of the signals received by both the internal receivers]