FCC ID: 2AYDBSNH-01 Snipes

FCC Warning Statement User Manual Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Product Information:

SNIPES is a set of interactive targets to connect your hockey net. Train your shooting accuracy, power and reaction time and track your progression! Snipes can be used standalone with our 4 preloaded game modes, or in tandem with our mobile app to unlock all functionalities. Within the app are multiple game modes, scorekeeping functions and in future updates will include online capabilities to play against your friends and opponents from around the world. Setup:

-Side A (carabiner), Side B (carabiner/spring)

-Connect side A by wrapping the carabiner around the post and clipping back on the lace

-Slide targets to desired position

-Connect side B around the post onto the hockey net, ensure the spring is slightly extended so there is tension on the lace Removing SNIPES remove side B, then side A Connecting/Removing electronics case 1. Slide case into the back of the target 2. Turn the dial by hand or with allan key to secure it into place 3. To charge, simply unscrew the dialby and or with allan key and slide the case out Charging:

1. Remove electronics case from the target and charge separately or together 2. Red light indicates charging Usage:

Without App:

1. Turn on all SNIPES targets you wish to use, they will all flash green 2. Hit one of the Snipes targets so it flashes blue, other targets will connect automatically and bring you to main menu 3. Select from one of the four preloaded game modes on SNIPES targets:

a. Single light (solid): single player, classic mode b. Single light (flashing): single player, react mode c. Two lights (solid): 2 player, classic mode d. 2 lights (flashing): 2 player, react mode 4. After the two player game finishes, you will automatically return to the main menu 5. To return to the main menu of single player mode, hit a target thats not lit up 3 times consecutively With APP:

Game Modes:

Preloaded On Targets:

1. Turn on all SNIPES targets you wish to use, they will all flash green 2. Within Bolt APP, connect to targets from main menu or settings page 3. Navigate desired game modes from APP Single Player, Classic: no time limit, aim for the target thats lit up Single Player, React: no time limit, hit the target as quick as you can once it lights up Two Player, Classic: head to head classic mode, 30 seconds, whichever color hits more points wins Two Player React: head to head react mode, first to 5 points wins Within APP:

Classic: 45 seconds, hit as many targets as you can Pro: Same with classic with a twist! Every few seconds the targets will change. React: All lights are off. When one lights up, hit it as quick as you can! Score 10 times to win. Your score is a total of time it took to hit all the targets. Arcade: Green = 1, Red = 2, Blue = 3. 45 seconds. Be careful, youll have to choose which target to hit and some targets are on longer than others!

2-Player: 30 seconds, player 1 is green, player 2 is blue, highest score wins!

Trainer Mode: This mode is designed for coaches or friends to use. Gives them the capability to Adjusting Target Sensitivity:

In the Settings menu of the mobile app, you can change the sensitivity of the targets to make them more or less sensitive. Targets come preloaded to sensitivity 5 (default). Slide up towards 10 make them less sensitive (harder to set off the sensor) and down towards 1 to make them more sensitive (easier to set off the sensor). All connected targets will be adjusted when you change the slider. FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

FCC ID LABEL:

FCC ID: 2AYDBSNH-01 Product name: Snipes Model No.: SNH-01 following two conditions:

Width:2cm This device complies with Part 15 of the FCC Rules. Operation is subject to the

(1)This device may not cause harmful interference

(2)This device must accept any interference received, including interference that may cause undesired operation. Long:3cm Label Location:

<Bolt Sports Corp>

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD21046 Subject; Request for Long Term Confidentiality FCC ID:2AYDBSNH-01 Date: Dec. 12, 2020 To Whom It May Concern, public disclosure indefinitely. Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Sincerely, Signature:

Name: Eric Eustace Title: Manager

Bolt Sports Corp Letter of Authorization Address: 954 King st west apt 329, Toronto, ON, M6K3L9, Canada Company:Bolt Sports Corp Product Name:Snipes Model Number:SNH-01 Serial Model:N/A FCC Identifier:2AYDBSNH-01 We authorize MiCOM LabsInc, 575 Boulder Court, Pleasanton, California94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM LabsInc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Eric Eustace Date:Dec. 12, 2020 Title: Manager Signature of applicant: