all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 128.84 KiB | August 08 2019 | |||
1 |
|
Internal Photos | Internal Photos | 2.83 MiB | August 08 2019 | |||
1 |
|
External Photos | External Photos | 1.39 MiB | August 08 2019 | |||
1 |
|
Label | ID Label/Location Info | 215.85 KiB | August 08 2019 | |||
1 |
|
Authorization Letter | Cover Letter(s) | 182.62 KiB | August 08 2019 | |||
1 | Block Diagram | Block Diagram | August 08 2019 | confidential | ||||
1 |
|
Confidentiality Letter | Cover Letter(s) | 506.71 KiB | August 08 2019 | |||
1 | Operational Description | Operational Description | August 08 2019 | confidential | ||||
1 |
|
RF Exposure Report | RF Exposure Info | 327.29 KiB | August 08 2019 | |||
1 | Schematics | Schematics | August 08 2019 | confidential | ||||
1 |
|
Test Report | Test Report | 1.37 MiB | August 08 2019 | |||
1 |
|
Test Setup Photos | Test Setup Photos | 796.46 KiB | August 08 2019 |
1 | User Manual | Users Manual | 128.84 KiB | August 08 2019 |
Whats in the box / Contenido de la caja / Que contient la bote?
Introducing Bond Touch / Introduccion a Bond Touch / Introduction Bond Touch Charge your Bond Touch / Cargar tu Bond Touch / Comment charger votre Bond Touch?
@bondtouch
@BondTouch
@Bond_Touch u vre moi O Bond Touch: 1 module + 1 TPU bracelet Bond Touch: 1 mdulo + 1 pulsera TPU Bond Touch: 1 botier + 1 bracelet en TPU 1 USB Charger 1 Cargador USB 1 Chargeur USB www.bond-touch.com 1 Remove the Bond Touch module and the TPU band from the box. Toma el mdulo Bond Touch y la correa TPU de la caja. Retirez le botier et le bracelet Bond Touch de la bote. 2 3 Wrap the bracelet around your wrist, adjust it to your size, and close it. Rodea tu mueca con el brazalete, ajusta a tu tamao y cierre. Enroulez le bracelet autour de votre poignet, ajustez-le votre taille, et fermez-le. You can charge your Bond Touch with the band attached to the module. Puedes cargar el Bond Touch con la correa conectada al mdulo. Vous pouvez recharger votre Bond Touch lorsque le bracelet est rattach au botier. 1 2 3 To charge your Bond Touch, take the side of the module that has the two copper pins. Para cargar tu Bond Touch, toma el lado del mdulo que tiene los dos pines de cobre. Pour charger votre Bond Touch, prenez le ct de votre botier qui comporte deux tiges en cuivre. Slide the charger against the modules surface until you feel a click. Make sure both sides of the module are securely seated. Desliza el cargador contra la superficie del mdulo hasta que sientas un clic. Asegrate que ambos lados del mdulo estn bien fijados. Faites glisser le chargeur contre la surface du botier jusqu entendre un clic. Assurez-vous que les deux cts du botier soient bien positionns. Connect the charger to a USB port. A flashing white light indicates that your Bond Touch is charging. You need to fully charge your Bond Touch before connecting it to your phone. This takes 3 to 4 hours. When the light stops flashing, it means your Bond Touch is fully charged. Conecta el cargador a un puerto USB. Una luz blanca intermitente indica que el Bond Touch est cargando. Es necesario que tu Bond Touch cargue completamente antes de conectarlo al telfono. Esto toma 3 a 4 horas. Cuando la luz deje de parpadear, significa que tu Bond Touch est completamente cargada. Branchez le chargeur un port USB. Une lumire blanche qui clignote indique que votre Bond Touch est en charge. Vous devez charger entirement votre Bond Touch avant de le connecter votre tlphone. Cela prend 3 4 heures. Quand la lumire cesse de clignoter, cela veut dire que votre Bond Touch est entirement charg. O p e n me breme Set up your Bond Touch / Configurar el Bond Touch / Comment configurer votre Bond Touch Important safety information Informacin importante de seguridad Informations de scurit importantes 1 2 3 3 4 Download the Bond Touch app from the App Store or Play Store. Descarga la aplicacin Bond Touch desde App Store o Play Store. Tlchargez lapplication Bond Touch sur lApp Store ou sur Play Store. Open the app, enable Bluetooth and pair your Bond Touch with your phone, following the apps instructions.
If youre an iOS user, make sure you disable Airplane Mode, Low Power Mode, Do Not Disturb, and enable Background App Refresh. Abre la aplicacin, activa el Bluetooth y empareja tu Bond Touch con el telfono, siguiendo las instrucciones de la aplicacin.
Si eres un usuario de iOS, asegrate de desactivar el Modo Avin, Modo de Baja Potencia, No Molestar y de permitir la Actualizacin de la Aplicacin de Fondo. Ouvrez lapplication, activez le Bluetooth et appariez votre Bond Touch avec votre tlphone en suivant les instructions de lapplication.
Si vous utilisez iOS, assurez-vous de dsactiver le Mode Avion, le mode conomie dnergie et Ne pas dranger et dactiver Actualisation en arrire-plan. Add your partner and make sure your partner adds you as well. Agrega a tu pareja y asegrate de que tu pareja te aade. Ajoutez votre partenaire et assurez vous quil vous ajoute aussi. Tap twice on your module to start bonding!
Pulsa dos veces en tu mdulo y disfruten del Bond Touch!
Tapotez deux fois sur le botier pour activer la connexion!
P.S. To enjoy Bond Touch, you must have Wi-Fi and Bluetooth enabled at all times. Always remember to leave the app open in the background while using Bond Touch. P.S. Para disfrutar del Bond Touch, debes tener Wi-Fi y Bluetooth activado en todo momento. Recuerda siempre dejar la aplicacin abierta en segundo plano mientras utilizas tu Bond Touch. P.S. Pour profiter de Bond Touch, vous devez maintenir le Wi-Fi et le Bluetooth activs en permanence. Noubliez pas de laisser lapplication ouverte en arrire-plan lorsque vous utilisez Bond Touch.connexion!
WARNING: The batteries installed shall not be exposed to excessive heat such as sunshine, fire or the like. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. CORRECT DISPOSAL OF THIS PRODUCT: This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. No naked flame sources, such as lighted candles, should be placed on the apparatus. Attention should be drawn to environmental aspects of battery disposal. The product is designed to use in moderate climates operating temperature. ADVERTENCIA: No exponga las bateras instaladas a un calor excesivo como la luz solar, fuego o similares. PRECAUCIN: Peligro de explosin si la batera se reemplaza incorrectamente. Reemplaza solamente con el mismo tipo o equivalente. ELIMINACIN CORRECTA DE ESTE PRODUCTO: Esta marca indica que este producto no debe eliminarse con otros residuos domsticos en toda la U.E. Para evitar los posibles daos para el medio ambiente o la salud humana de la eliminacin incontrolada de residuos, recicle correctamente para promover la reutilizacin sostenible de recursos materiales. Para devolver el dispositivo usado, utilizar los sistemas de devolucin y recogida o contacta con el distribuidor donde hayas comprado el producto. Ellos podrn encargarse del reciclaje seguro y ecolgico del producto. Fuentes de llama desnuda, como velas encendidas, no deben colocarse sobre el aparato. Recomendamos una atencin a los aspectos ambientales de la eliminacin de la batera. El producto est diseado para uso en climas moderados a temperatura de funcionamiento. ATTENTION: La batterie ne doit pas tre expose une trop forte chaleur telle que les rayons du soleil, le feu ou autre. AVERTISSEMENT: Danger dexplosion si la batterie est remplace de faon incorrecte. Toujours remplacer par le mme type de batterie ou son quivalent. COMMENT LIMINER CE PRODUIT: Ce marquage indique que ce produit ne peut pas tre jet avec dautres dchets mnagers selon lU.E. Llimination incontrle de dchets pouvant porter prjudice lenvironnement ou la sant humaine, veuillez le recycler de faon responsable conformment au principe de rutilisation des ressources matrielles. Pour renvoyer votre ancien appareil, utilisez les systmes de renvoi et de collecte ou contactez le dtaillant chez qui vous avez achet le produit. Ils peuvent reprendre le produit pour procder son recyclage en toute scurit. Ne placez aucun objet incandescent telle quune bougie allume sur lappareil. Une attention toute particulire doit tre porte aux aspects environnementaux de la disposition de la batterie. Ce produit a t conu pour un usage en climat tempr. For terms of use and warranty information connect to:
help.bond-touch.com/legal/warranty-and-returns You can reach us at info@bond-touch.com Para trminos de uso y condiciones de garanta conectar a:
help.bond-touch.com/legal/warranty-and-returns Comunica con nosotros en info@bond-touch.com Pour accder aux termes dutilisation et la garantie connectez-vous sur:
help.bond-touch.com/legal/warranty-and-returns Vous pouvez nous contactez ladresse info@bond-touch.com FFC ID: 2ANQ2BOND002 Model: Bond002 Made in China Manufactured for: Bond Touch Inc. 622 Santa Cruz Ave, Suite B Menlo Park, CA 94025 USA This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Este dispositivo cumple con la normativa de U.E. de FCC Parte 15. El funcionamiento est sujeto a las siguientes dos condiciones:
(1) este dispositivo no debe causar interferencias perjudiciales y
(2) este dispositivo debe aceptar cualquier interferencia recibida, incluyendo interferencia que pueda causar un funcionamiento no deseado. Ce dispositif est conforme lalina 15 de la section FCC. Son fonctionnement est soumis aux deux conditions suivantes:
(1) cet appareil ne doit pas provoquer dinterfrences nuisibles, et
(2) cet appareil doit accepter toute interfrence, y compris des interfrences pouvant provoquer un fonctionnement prjudiciable. FCC Statement:
Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IC Statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply withInnovation, Science and Economic DevelopmentCanadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:
(1) Lappareil ne doit pas produire de brouillage;
(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. Cet quipement est conforme aux limites dexposition aux radiations IC CNR-102 tablies pour un environnement non contrl. Maximum power output: 0dBm
1 | Internal Photos | Internal Photos | 2.83 MiB | August 08 2019 |
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 4 Internal Photos for SZEM1906015497CR FCC ID: 2ANQ2BOND002 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 4 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 4
1 | External Photos | External Photos | 1.39 MiB | August 08 2019 |
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 5 External Photos for SZEM1906015497CR FCC ID: 2ANQ2BOND002 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 5 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 5
1 | Label | ID Label/Location Info | 215.85 KiB | August 08 2019 |
Bond Touch Inc. FCC ID: 2ANQ2BOND002 IC: 25165-BOND002 Product Name: Bond Touch Model: Bond002 Trade Mark: Bond Touch 1906 BC 8.8mm 26.3mm
1 | Authorization Letter | Cover Letter(s) | 182.62 KiB | August 08 2019 |
Bond Touch Inc. Date: 2019-06-26 TO:
Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID:2ANQ2BOND002 To whom it may concern:
We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Joyce Shi in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Bond Touch Inc. This authorization is valid until further written notice from the applicant. Print Name: Christoph Dressel Signature:
Title: CEO On behalf of Company: Bond Touch Inc. Telephone: +1 415 568 8145 E-mail: chris@impossible.com
1 | Confidentiality Letter | Cover Letter(s) | 506.71 KiB | August 08 2019 |
Bond Touch Inc. Confidentiality Request regarding application for FCC ID: 2ANQ2BOND002 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States To:
Regarding:
LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Print Name: Christoph Dressel Signature:
On behalf of Company: Bond Touch Inc. Telephone: +1 (415) 568-8145 E-mail: chris@impossible.com Title: manager
1 | RF Exposure Report | RF Exposure Info | 327.29 KiB | August 08 2019 |
1 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549703 Page:
1 of 7 Cover page SAR Evaluation Report Application No.:
SZEM1906015497CR Applicant:
Bond Touch Inc. Address of Applicant:
622B Santa Cruz Ave. Menlo Park, California, 94025, United States Manufacturer:
Joint Chinese Ltd Address of Manufacturer:
Building 4&6, Huafeng Tech Park, Guangtian Road, Luotian Industrial Area, Songgang Town, Baoan District, Shenzhen, P.R. China Equipment Under Test (EUT):
EUT Name:
Model No.:
Trade mark:
FCC ID:
Standards:
Bond Touch Bond002 Bond Touch 2ANQ2BOND002 47 CFR Part 1.1307 47 CFR Part 2.1093 KDB447498D01 General RF Exposure Guidance v06 Date of Receipt:
2019-06-21 Date of Test:
Date of Issue:
Test Result :
2019-06-25 to 2019-07-05 2019-07-11 PASS*
*
In the configuration tested, the EUT complied with the standards specified above. Keny Xu EMC Laboratory Manager 2 Version SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549703 Page: 2 of 7 Version Chapter Date Modifier Remark Revision Record 01 2019-07-11 Original Authorized for issue by:
Leo Li /Project Engineer Eric Fu /Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549703 Page: 3 of 7 3 Contents Page 1 2 3 4 COVER PAGE .............................................................................................................................................. 1 VERSION ...................................................................................................................................................... 2 CONTENTS .................................................................................................................................................. 3 GENERAL INFORMATION .......................................................................................................................... 4 4.1 4.2 4.3 4.4 4.5 4.6 GENERAL DESCRIPTION OF EUT ............................................................................................................. 4 TEST LOCATION ...................................................................................................................................... 5 TEST FACILITY ........................................................................................................................................ 5 DEVIATION FROM STANDARDS ................................................................................................................. 6 ABNORMALITIES FROM STANDARD CONDITIONS ....................................................................................... 6 OTHER INFORMATION REQUESTED BY THE CUSTOMER ............................................................................. 6 5 SAR EVALUATION ...................................................................................................................................... 7 5.1 RF EXPOSURE COMPLIANCE REQUIREMENT ............................................................................................ 7 5.1.1 Standard Requirement ..................................................................................................................... 7 5.1.2 Limits ................................................................................................................................................ 7 5.1.3 EUT RF Exposure ............................................................................................................................ 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549703 Page: 4 of 7 4 General Information 4.1 General Description of EUT Power supply:
Lithium Ion Battery: 3.7V 40mAh rechargeable battery which charged by USB port Cable:
USB cable: 25cm unshielded Channel Spacing:
2MHz Operation Frequency:
2402MHz to 2480MHz Bluetooth Version:
V4.2 LE Modulation Type:
GFSK Number of Channels:
40 Antenna Type:
Chip Antenna Antenna Gain:
0dBi SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549703 Page: 5 of 7 4.2 Test Location All tests were performed at:
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 No tests were sub-contracted. 4.3 Test Facility The test facility is recognized, certified, or accredited by the following organizations:
CNAS (No. CNAS L2929) CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. FCC Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178. Test Firm Registration Number: 406779. Innovation, Science and Economic Development Canada SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized by ISED as an accredited testing laboratory. CAB identifier: CN0006. IC#: 4620C. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549703 Page: 6 of 7 4.4 Deviation from Standards None. 4.5 Abnormalities from Standard Conditions None. 4.6 Other Information Requested by the Customer None. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549703 Page: 7 of 7 5 SAR Evaluation 5.1 RF Exposure Compliance Requirement 5.1.1 Standard Requirement According to KDB447498D01 General RF Exposure Guidance v06 4.3.1. Standalone SAR test exclusion considerations Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Exclusion Threshold condition, listed below, is satisfied. 5.1.2 Limits The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances 50 mm are determined by:
[(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)]
[f(GHz)] 3.0 for 1-g SAR and 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation17 The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion 5.1.3 EUT RF Exposure The Max. power (including tune-up tolerance) is -0.68 dBm on the lowest channel
-0.68 dBm logarithmic terms convert to numeric result is nearly 0.86 mW According to the formula. calculate the test exclusion thresholds:
2.48 GHz (*) General RF Exposure
. , ,
. , General RF Exposure = (0.86 mW / 5 mm) x 2.48 GHz = 0.27 SAR requirement:
S = 3.0
(1) < (2) So the SAR report is not required.
(1)
(2)
(*) Max. power refer to Report No.:SZEM190601549702
- End of the Report -
1 | Test Report | Test Report | 1.37 MiB | August 08 2019 |
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page:
1 of 52 TEST REPORT Application No.:
SZEM1906015497CR Applicant:
Bond Touch Inc. Address of Applicant:
622B Santa Cruz Ave. Menlo Park, California, 94025, United States Manufacturer:
Joint Chinese Ltd Address of Manufacturer:
Building 4&6, Huafeng Tech Park, Guangtian Road, Luotian Industrial Area, Songgang Town, Baoan District, Shenzhen, P.R. China Equipment Under Test (EUT):
EUT Name:
Model No.:
Trade mark:
FCC ID:
Standard(s) :
Date of Receipt:
Date of Test:
Date of Issue:
Test Result:
Bond Touch Bond002 Bond Touch 2ANQ2BOND002 47 CFR Part 15, Subpart C 15.247 2019-06-21 2019-06-25 to 2019-07-05 2019-07-11 Pass*
* In the configuration tested, the EUT complied with the standards specified above. Keny Xu EMC Laboratory Manager SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 2 of 52 Version Chapter Date Modifier Remark Revision Record 01 2019-07-11 Original Authorized for issue by:
Leo Li /Project Engineer Eric Fu /Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 3 of 52 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Minimum 6dB Bandwidth 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) 47 CFR Part 15, Subpart Section 11.8.1 C 15.247a(2) Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) 47 CFR Part 15, Subpart Section 11.9.1 C 15.247(b)(3) Power Spectrum Density 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) 47 CFR Part 15, Subpart Section 11.10.2 C 15.247(e) Conducted Band Edges Measurement 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) 47 CFR Part 15, Subpart Section 11.13.3.2 C 15.247(d) Conducted Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) 47 CFR Part 15, Subpart Section 11.11 C 15.247(d) Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) 47 CFR Part 15, Subpart Section 6.10.5 C 15.205 & 15.209 Pass Pass Pass Pass Pass Pass Radiated Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass 3 Contents SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 4 of 52 1 2 3 4 5 6 7 Page COVER PAGE ............................................................................................................................................ 1 TEST SUMMARY ....................................................................................................................................... 3 CONTENTS ................................................................................................................................................ 4 4.1 4.2 4.3 4.4 4.5 4.6 4.7 GENERAL INFORMATION ........................................................................................................................ 6 DETAILS OF E.U.T. .............................................................................................................................. 6 DESCRIPTION OF SUPPORT UNITS ......................................................................................................... 6 MEASUREMENT UNCERTAINTY .............................................................................................................. 6 TEST LOCATION .................................................................................................................................... 7 TEST FACILITY ...................................................................................................................................... 7 DEVIATION FROM STANDARDS ............................................................................................................... 7 ABNORMALITIES FROM STANDARD CONDITIONS ..................................................................................... 7 EQUIPMENT LIST ...................................................................................................................................... 8 6.1 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................... 12 ANTENNA REQUIREMENT .................................................................................................................... 12 6.1.1 Test Requirement: ....................................................................................................................... 12 6.1.2 Conclusion ................................................................................................................................... 12 RADIO SPECTRUM MATTER TEST RESULTS ..................................................................................... 13 MINIMUM 6DB BANDWIDTH .................................................................................................................. 13 7.1.1 E.U.T. Operation .......................................................................................................................... 13 7.1.2 Test Setup Diagram ..................................................................................................................... 13 7.1.3 Measurement Procedure and Data............................................................................................. 13 CONDUCTED PEAK OUTPUT POWER .................................................................................................... 14 7.2.1 E.U.T. Operation .......................................................................................................................... 15 7.2.2 Test Setup Diagram ..................................................................................................................... 15 7.2.3 Measurement Procedure and Data............................................................................................. 15 POWER SPECTRUM DENSITY ............................................................................................................... 16 7.3.1 E.U.T. Operation .......................................................................................................................... 16 7.3.2 Test Setup Diagram ..................................................................................................................... 16 7.3.3 Measurement Procedure and Data............................................................................................. 16 CONDUCTED BAND EDGES MEASUREMENT .......................................................................................... 17 7.4.1 E.U.T. Operation .......................................................................................................................... 18 7.4.2 Test Setup Diagram ..................................................................................................................... 18 7.4.3 Measurement Procedure and Data............................................................................................. 18 CONDUCTED SPURIOUS EMISSIONS ..................................................................................................... 19 7.5.1 E.U.T. Operation .......................................................................................................................... 20 7.5.2 Test Setup Diagram ..................................................................................................................... 20 7.5.3 Measurement Procedure and Data............................................................................................. 20 RADIATED EMISSIONS WHICH FALL IN THE RESTRICTED BANDS .............................................................. 21 7.6.1 E.U.T. Operation .......................................................................................................................... 21 7.6.2 Test Setup Diagram ..................................................................................................................... 21 7.6.3 Measurement Procedure and Data............................................................................................. 22 7.1 7.2 7.3 7.4 7.5 7.6 8 9 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 5 of 52 7.7 RADIATED SPURIOUS EMISSIONS ........................................................................................................ 27 7.7.1 E.U.T. Operation .......................................................................................................................... 28 7.7.2 Test Setup Diagram ..................................................................................................................... 28 7.7.3 Measurement Procedure and Data............................................................................................. 29 PHOTOGRAPHS ...................................................................................................................................... 38 TEST SETUP ....................................................................................................................................... 38 EUT CONSTRUCTIONAL DETAILS (EUT PHOTOS) ................................................................................. 38 APPENDIX ................................................................................................................................................ 39 APPENDIX 15.247 ........................................................................................................................ 39-51 8.1 8.2 9.1 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 6 of 52 4 General Information 4.1 Details of E.U.T. Power supply:
Lithium Ion Battery: 3.7V 40mAh rechargeable battery which charged by USB port Cable:
USB cable: 25cm unshielded Channel Spacing:
2MHz Operation Frequency:
2402MHz to 2480MHz Bluetooth Version:
V4.2 LE Modulation Type:
GFSK Number of Channels:
40 Antenna Type:
Antenna Gain:
Chip Antenna 0dBi 4.2 Description of Support Units The EUT has been tested as an independent unit. 4.3 Measurement Uncertainty No. 1 2 3 4 5 6 7 8 9 10 Item Radio Frequency Occupied Bandwidth RF conducted power RF power density Conducted Spurious emissions Radiated Spurious emission test Temperature test Humidity test Supply voltages Time Measurement Uncertainty 7.25 x 10-8 3%
0.75dB 2.84dB 0.75dB 4.5dB (Below 1GHz) 4.8dB (Above 1GHz) 1C 3%
1.5%
3%
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 7 of 52 4.4 Test Location All tests were performed at:
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Shenzhen, Guangdong, China. 518057. Tel: +86 755 2601 2053 No tests were sub-contracted. Fax: +86 755 2671 0594 4.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations:
CNAS (No. CNAS L2929) CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. FCC Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178. Test Firm Registration Number: 406779. Innovation, Science and Economic Development Canada SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized by ISED as an accredited testing laboratory. CAB identifier: CN0006. IC#: 4620C. 4.6 Deviation from Standards None 4.7 Abnormalities from Standard Conditions None SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 8 of 52 5 Equipment List Minimum 6dB Bandwidth Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date Shielding Room DC Power Supply SAEMC ZhaoXin MSR733 SEM001-09 2019-06-13 2024-06-12 RXN-305D SEM011-02 2018-09-25 2019-09-24 Spectrum Analyzer Rohde & Schwarz FSU43 SEM004-08 2019-04-01 2020-03-31 Measurement Software JS Tonscend JS1120-2 BT/WIFI V2. N/A N/A N/A Coaxial Cable SGS N/A SEM031-01 2019-07-11 2020-07-10 Attenuator Weinschel Associates WA41 SEM021-09 N/A N/A Signal Generator KEYSIGHT N5173B SEM006-05 2018-09-27 2019-09-26 Power Meter Rohde & Schwarz NRVS SEM014-02 2018-09-25 2019-09-24 Conducted Peak Output Power Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date Shielding Room DC Power Supply SAEMC ZhaoXin MSR733 SEM001-09 2019-06-13 2024-06-12 RXN-305D SEM011-02 2018-09-25 2019-09-24 Spectrum Analyzer Rohde & Schwarz FSU43 SEM004-08 2019-04-01 2020-03-31 Measurement Software JS Tonscend JS1120-2 BT/WIFI V2. N/A N/A N/A Coaxial Cable SGS N/A SEM031-01 2019-07-11 2020-07-10 Attenuator Weinschel Associates WA41 SEM021-09 N/A N/A Signal Generator KEYSIGHT N5173B SEM006-05 2018-09-27 2019-09-26 Power Meter Rohde & Schwarz NRVS SEM014-02 2018-09-25 2019-09-24 Power Spectrum Density Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date Shielding Room DC Power Supply SAEMC ZhaoXin MSR733 SEM001-09 2019-06-13 2024-06-12 RXN-305D SEM011-02 2018-09-25 2019-09-24 Spectrum Analyzer Rohde & Schwarz FSU43 SEM004-08 2019-04-01 2020-03-31 Measurement Software JS Tonscend JS1120-2 BT/WIFI V2. N/A N/A N/A Coaxial Cable SGS N/A SEM031-01 2019-07-11 2020-07-10 Attenuator Weinschel Associates WA41 SEM021-09 N/A N/A Signal Generator KEYSIGHT N5173B SEM006-05 2018-09-27 2019-09-26 Power Meter Rohde & Schwarz NRVS SEM014-02 2018-09-25 2019-09-24 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 9 of 52 Conducted Band Edges Measurement Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date Shielding Room DC Power Supply SAEMC ZhaoXin MSR733 SEM001-09 2019-06-13 2024-06-12 RXN-305D SEM011-02 2018-09-25 2019-09-24 Spectrum Analyzer Rohde & Schwarz FSU43 SEM004-08 2019-04-01 2020-03-31 Measurement Software JS Tonscend JS1120-2 BT/WIFI V2. N/A N/A N/A Coaxial Cable SGS N/A SEM031-01 2019-07-11 2020-07-10 Attenuator Weinschel Associates WA41 SEM021-09 N/A N/A Signal Generator KEYSIGHT N5173B SEM006-05 2018-09-27 2019-09-26 Power Meter Rohde & Schwarz NRVS SEM014-02 2018-09-25 2019-09-24 Conducted Spurious Emissions Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date Shielding Room DC Power Supply SAEMC ZhaoXin MSR733 SEM001-09 2019-06-13 2024-06-12 RXN-305D SEM011-02 2018-09-25 2019-09-24 Spectrum Analyzer Rohde & Schwarz FSU43 SEM004-08 2019-04-01 2020-03-31 Measurement Software JS Tonscend JS1120-2 BT/WIFI V2. N/A N/A N/A Coaxial Cable SGS N/A SEM031-01 2019-07-11 2020-07-10 Attenuator Weinschel Associates WA41 SEM021-09 N/A N/A Signal Generator KEYSIGHT N5173B SEM006-05 2018-09-27 2019-09-26 Power Meter Rohde & Schwarz NRVS SEM014-02 2018-09-25 2019-09-24 Radiated Emissions which fall in the restricted bands Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date 3m Semi-Anechoic Chamber AUDIX N/A SEM001-02 2018-03-13 2021-03-12 Measurement Software AUDIX Coaxial Cable SGS EXA Spectrum Analyzer AgilentTechnologies Inc e3 V8.2014-6-
27 N/A N/A N/A N/A SEM026-01 2019-07-11 2020-07-10 N9010A SEM004-12 2019-04-12 2020-04-11 Horn Antenna
(1-18GHz) Horn Antenna
(15GHz-40GHz) Pre-Amplifier
(0.1-26.5GHz) Rohde & Schwarz HF907 SEM003-07 2018-04-13 2021-04-12 Schwarzbeck BBHA 9170 SEM003-15 2017-10-17 2020-10-16 Compliance Directions Systems PAP-0126 SEM004-11 2018-11-12 2019-11-11 Inc. Pre-amplifier(18-26GHz) Rohde & Schwarz CH14-H052 SEM005-17 2019-04-01 2020-03-31 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 10 of 52 Pre-amplifier
(26GHz-40GHz) Compliance Directions Systems PAP-2640-50 SEM005-08 2019-04-01 2020-03-31 Inc. DC Power Supply Zhao Xin RXN-305D SEM011-02 2018-09-25 2019-09-24 Active Loop Antenna ETS-Lindgren 6502 SEM003-08 2017-08-22 2020-08-21 Radiated Spurious Emissions (Above 1GHz) Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date 3m Semi-Anechoic Chamber AUDIX N/A SEM001-02 2018-03-13 2021-03-12 Measurement Software AUDIX Coaxial Cable SGS EXA Spectrum Analyzer AgilentTechnologies Inc e3 V8.2014-6-
27 N/A N/A N/A N/A SEM026-01 2019-07-11 2020-07-10 N9010A SEM004-12 2019-04-12 2020-04-11 Horn Antenna
(1-18GHz) Horn Antenna
(15GHz-40GHz) Pre-Amplifier
(0.1-26.5GHz) Rohde & Schwarz HF907 SEM003-07 2018-04-13 2021-04-12 Schwarzbeck BBHA 9170 SEM003-15 2017-10-17 2020-10-16 Compliance Directions Systems PAP-0126 SEM004-11 2018-11-12 2019-11-11 Inc. Pre-amplifier(18-26GHz) Rohde & Schwarz CH14-H052 SEM005-17 2019-04-01 2020-03-31 Pre-amplifier
(26GHz-40GHz) Compliance Directions Systems PAP-2640-50 SEM005-08 2019-04-01 2020-03-31 Inc. DC Power Supply Zhao Xin RXN-305D SEM011-02 2018-09-25 2019-09-24 Active Loop Antenna ETS-Lindgren 6502 SEM003-08 2017-08-22 2020-08-21 Radiated Spurious Emissions (30MHz-1GHz) Test Equipment Manufacturer Model No. Inventory No. Cal. Date Cal. Due date 3m Semi-Anechoic Chamber MXE EMI Receiver
(20Hz-8.4GHz) BiConiLog Antenna
(26-3000MHz) Pre-amplifier
(0.1-1300MHz) ETS-LINDGREN N/A SEM001-01 2017-08-05 2020-08-04 Agilent Technologies N9038A SEM004-05 2018-09-25 2019-09-24 ETS-LINDGREN 3142C SEM003-01 2017-06-27 2020-06-26 Agilent Technologies 8447D SEM005-01 2019-04-01 2020-03-31 e3 V8.2014-6-
N/A N/A N/A Measurement Software AUDIX Coaxial Cable SGS 27 N/A SEM025-01 2018-07-12 2019-07-11 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 11 of 52 General used equipment Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date Humidity/ Temperature Indicator Humidity/ Temperature Indicator Humidity/ Temperature Indicator Barometer Shanghai Meteorological Industry Factory Shanghai Meteorological Industry Factory ZJ1-2B SEM002-03 2018-09-27 2019-09-26 ZJ1-2B SEM002-04 2018-09-27 2019-09-26 Mingle N/A SEM002-08 2018-09-27 2019-09-26 Changchun Meteorological Industry Factory DYM3 SEM002-01 2019-04-04 2020-04-03 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 12 of 52 6 Radio Spectrum Technical Requirement 6.1 Antenna Requirement 6.1.1 Test Requirement:
47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) 6.1.2 Conclusion Standard Requirement:
An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator, the manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. 15.247(b) (4) requirement:
The conducted output power limit specified in paragraph (b) of this section is based on the use of antennas with directional gains that do not exceed 6 dBi. Except as shown in paragraph (c) of this section, if transmitting antennas of directional gain greater than 6 dBi are used, the conducted output power from the intentional radiator shall be reduced below the stated values in paragraphs (b)(1),
(b)(2), and (b)(3) of this section, as appropriate, by the amount in dB that the directional gain of the antenna exceeds 6 dBi. EUT Antenna:
The antenna is integrated on the main PCB and no consideration of replacement. The best case gain of the antenna is 0dBi. Antenna location: Refer to Appendix(Internal photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 13 of 52 7 Radio Spectrum Matter Test Results 7.1 Minimum 6dB Bandwidth Test Requirement 47 CFR Part 15, Subpart C 15.247a(2) Test Method:
Limit:
ANSI C63.10 (2013) Section 11.8.1 500 kHz 7.1.1 E.U.T. Operation Operating Environment:
Temperature:
Test mode Humidity: 68.8 % RH 25.7 C b:TX mode_Keep the EUT in continuously transmitting mode with GFSK modulation Atmospheric Pressure: 1000 mbar 7.1.2 Test Setup Diagram 7.1.3 Measurement Procedure and Data The detailed test data see: Appendix 15.247 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 14 of 52 7.2 Conducted Peak Output Power Test Requirement 47 CFR Part 15, Subpart C 15.247(b)(3) Test Method:
ANSI C63.10 (2013) Section 11.9.1 Limit:
Frequency range(MHz) Output power of the intentional radiator(watt) 902-928 0.25 for 25 hopping channels <50 1 for 50 hopping channels 1 for digital modulation 1 for 75 non-overlapping hopping channels 2400-2483.5 0.125 for all other frequency hopping systems 1 for digital modulation 5725-5850 1 for frequency hopping systems and digital modulation SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 15 of 52 7.2.1 E.U.T. Operation Operating Environment:
Temperature:
Test mode Humidity: 68.8 % RH 25.7 C b:TX mode_Keep the EUT in continuously transmitting mode with GFSK modulation Atmospheric Pressure: 1000 mbar 7.2.2 Test Setup Diagram 7.2.3 Measurement Procedure and Data The detailed test data see: Appendix 15.247 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 16 of 52 7.3 Power Spectrum Density Test Requirement 47 CFR Part 15, Subpart C 15.247(e) Test Method:
Limit:
ANSI C63.10 (2013) Section 11.10.2 8dBm in any 3 kHz band during any time interval of continuous transmission 7.3.1 E.U.T. Operation Operating Environment:
Temperature:
Test mode Humidity: 68.8 % RH 25.7 C b:TX mode_Keep the EUT in continuously transmitting mode with GFSK modulation Atmospheric Pressure: 1000 mbar 7.3.2 Test Setup Diagram 7.3.3 Measurement Procedure and Data The detailed test data see: Appendix 15.247 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 17 of 52 7.4 Conducted Band Edges Measurement Test Requirement 47 CFR Part 15, Subpart C 15.247(d) Test Method:
ANSI C63.10 (2013) Section 11.13.3.2 Limit:
In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, as permitted under paragraph (b)(3) of this section, the attenuation required under this paragraph shall be 30 dB instead of 20 dB. Attenuation below the general limits specified in 15.209(a) is not required. In addition, radiated emissions which fall in the restricted bands, as defined in 15.205(a), must also comply with the radiated emission limits specified in 15.209(a) (see 15.205(c) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 18 of 52 7.4.1 E.U.T. Operation Operating Environment:
Temperature:
Test mode Humidity: 68.9 % RH 25.7 C b:TX mode_Keep the EUT in continuously transmitting mode with GFSK modulation Atmospheric Pressure: 1000 mbar 7.4.2 Test Setup Diagram 7.4.3 Measurement Procedure and Data The detailed test data see: Appendix 15.247 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 19 of 52 7.5 Conducted Spurious Emissions Test Requirement 47 CFR Part 15, Subpart C 15.247(d) Test Method:
ANSI C63.10 (2013) Section 11.11 Limit:
In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, as permitted under paragraph (b)(3) of this section, the attenuation required under this paragraph shall be 30 dB instead of 20 dB. Attenuation below the general limits specified in 15.209(a) is not required. In addition, radiated emissions which fall in the restricted bands, as defined in 15.205(a), must also comply with the radiated emission limits specified in 15.209(a) (see 15.205(c) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 20 of 52 7.5.1 E.U.T. Operation Operating Environment:
Temperature:
Test mode Humidity: 68.9 % RH 25.7 C b:TX mode_Keep the EUT in continuously transmitting mode with GFSK modulation Atmospheric Pressure: 1000 mbar 7.5.2 Test Setup Diagram 7.5.3 Measurement Procedure and Data The detailed test data see: Appendix 15.247 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 21 of 52 7.6 Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.205 & 15.209 Test Requirement Test Method:
ANSI C63.10 (2013) Section 6.10.5 Measurement Distance: 3m Limit:
Frequency(MHz) Field strength(microvolts/meter) Measurement distance(meters) 0.009-0.490 0.490-1.705 1.705-30.0 30-88 88-216 216-960 Above 960 2400/F(kHz) 24000/F(kHz) 30 100 150 200 500 300 30 30 3 3 3 3 Remark: The emission limits shown in the above table are based on measurements employing a CISPR quasi-peak detector except for the frequency bands 9-90kHz, 110-490kHz and above 1000 MHz. Radiated emission limits in these three bands are based on measurements employing an average detector, the peak field strength of any emission shall not exceed the maximum permitted average limits specified above by more than 20 dB under any condition of modulation. 7.6.1 E.U.T. Operation Operating Environment:
Temperature:
Test mode Humidity: 55 % RH 22.1 C b:TX mode_Keep the EUT in continuously transmitting mode with GFSK modulation Atmospheric Pressure: 1010 mbar 7.6.2 Test Setup Diagram SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 22 of 52 7.6.3 Measurement Procedure and Data a. For below 1GHz, the EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 or 10 meter semi-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest radiation. b. For above 1GHz, the EUT was placed on the top of a rotating table 1.5 meters above the ground at a 3 meter fully-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest radiation. c. The EUT was set 3 or 10 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. d. The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. e. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters (for the test frequency of below 30MHz, the antenna was tuned to heights 1 meter) and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. f. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. g. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. h. Test the EUT in the lowest channel, the middle channel, the Highest channel. i. The radiation measurements are performed in X, Y, Z axis positioning for Transmitting mode, and found the X axis positioning which it is the worst case. j. Repeat above procedures until all frequencies measured was complete. Remark 1: Level= Read Level+ Cable Loss+ Antenna Factor- Preamp Factor Remark 2: For frequencies above 1GHz, the field strength limits are based on average limits. However, the peak field strength of any emission shall not exceed the maximum permitted average limits specified above by more than 20 dB under any condition of modulation. For the emissions whose peak level is lower than the average limit, only the peak measurement is shown in the report. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 23 of 52 Mode:b; Polarization:Horizontal; Modulation:GFSK; ; Channel:Low SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 24 of 52 Mode:b; Polarization:Vertical; Modulation:GFSK; ; Channel:Low SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 25 of 52 Mode:b; Polarization:Horizontal; Modulation:GFSK; ; Channel:High SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 26 of 52 Mode:b; Polarization:Vertical; Modulation:GFSK; ; Channel:High SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 27 of 52 7.7 Radiated Spurious Emissions Test Requirement 47 CFR Part 15, Subpart C 15.205 & 15.209 Test Method:
ANSI C63.10 (2013) Section 6.4,6.5,6.6 Measurement Distance: 3m Limit:
Frequency(MHz) Field strength(microvolts/meter) Measurement distance(meters) 0.009-0.490 0.490-1.705 1.705-30.0 30-88 88-216 216-960 Above 960 2400/F(kHz) 24000/F(kHz) 30 100 150 200 500 300 30 30 3 3 3 3 Remark: The emission limits shown in the above table are based on measurements employing a CISPR quasi-peak detector except for the frequency bands 9-90kHz, 110-490kHz and above 1000 MHz. Radiated emission limits in these three bands are based on measurements employing an average detector, the peak field strength of any emission shall not exceed the maximum permitted average limits specified above by more than 20 dB under any condition of modulation. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 28 of 52 7.7.1 E.U.T. Operation Operating Environment:
Temperature:
Test mode Humidity: 60.2 % RH 24.2 C b:TX mode_Keep the EUT in continuously transmitting mode with GFSK modulation Atmospheric Pressure: 1010 mbar 7.7.2 Test Setup Diagram SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 29 of 52 7.7.3 Measurement Procedure and Data a. For below 1GHz, the EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 or 10 meter semi-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest radiation. b. For above 1GHz, the EUT was placed on the top of a rotating table 1.5 meters above the ground at a 3 meter fully-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest radiation. c. The EUT was set 3 or 10 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. d. The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. e. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters (for the test frequency of below 30MHz, the antenna was tuned to heights 1 meter) and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. f. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. g. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. h. Test the EUT in the lowest channel, the middle channel, the Highest channel. i. The radiation measurements are performed in X, Y, Z axis positioning for Transmitting mode, and found the X axis positioning which it is the worst case. j. Repeat above procedures until all frequencies measured was complete. Remark:
1) For emission below 1GHz, through pre-scan found the worst case is the lowest channel. Only the worst case is recorded in the report. 2) The field strength is calculated by adding the Antenna Factor, Cable Factor & Preamplifier. The basic equation with a sample calculation is as follows:
Final Test Level =Receiver Reading + Antenna Factor + Cable Factor Preamplifier Factor 3) Scan from 9kHz to 25GHz, the disturbance above 18GHz and below 30MHz was very low. The points marked on above plots are the highest emissions could be found when testing, so only above points had been displayed. The amplitude of spurious emissions from the radiator which are attenuated more than 20dB below the limit need not be reported. 4) For frequencies above 1GHz, the field strength limits are based on average limits. However, the peak field strength of any emission shall not exceed the maximum permitted average limits specified above by more than 20 dB under any condition of modulation. For the emissions whose peak level is lower than the average limit, only the peak measurement is shown in the report. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 30 of 52 30MHz~1GHz QP value:
Mode: b; Polarization: Horizontal;
Mode :b; Polarization: Vertical SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 31 of 52 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 32 of 52 Above 1GHz Mode:b; Polarization:Horizontal; Modulation:GFSK; ; Channel:Low SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 33 of 52 Mode:b; Polarization:Vertical; Modulation:GFSK; ; Channel:Low SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 34 of 52 Mode:b; Polarization:Horizontal; Modulation:GFSK; ; Channel:middle SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 35 of 52 Mode:b; Polarization:Vertical; Modulation:GFSK; ; Channel:middle SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 36 of 52 Mode:b; Polarization:Horizontal; Modulation:GFSK; ; Channel:High SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 37 of 52 Mode:b; Polarization:Vertical; Modulation:GFSK; ; Channel:High SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 38 of 52 8 Photographs 8.1 Test Setup Please refer to setup photos. 8.2 EUT Constructional Details (EUT Photos) Please refer to external and internal photos for details. 9 Appendix 9.1 Appendix 15.247 1.6dB Bandwidth Test Mode Test BLE BLE BLE 2402 2440 2480 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 39 of 52 Ant Ant1 Ant1 Ant1 EBW[MHz]
Limit[MHz] Verdict 0.687 0.681 0.690
>=0.5 PASS
>=0.5 PASS
>=0.5 PASS SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 40 of 52 6dB Bandwidth_BLE_2402_Ant1 1 PK VIEW 1 PK VIEW Ref 10 dBm
*
Att 20 dB SWT 5 ms 2.402351000 GHz
* RBW 100 kHz Marker 3 [T1 ]
* VBW 300 kHz
-7.20 dBm 1 Marker 1 [T1 ]
-0.80 dBm 2.402015000 GHz A 2 3 Marker 2 [T1 ]
-6.99 dBm 2.401664000 GHz LVL 3DB 10 Offset 1.1 dB D1 -6.8 dBm 0
-10
-20
-30
-40
-50
-60
-70
-80
-90 Center 2.402 GHz 300 kHz/
Span 3 MHz 6dB Bandwidth_BLE_2440_Ant1 Ref 10 dBm
*
Att 20 dB SWT 5 ms 2.440348000 GHz
* RBW 100 kHz Marker 3 [T1 ]
* VBW 300 kHz
-7.23 dBm 1 Marker 1 [T1 ]
-0.65 dBm 2.440018000 GHz A 2 3 Marker 2 [T1 ]
-6.66 dBm 2.439667000 GHz LVL 3DB 10 Offset 1.1 dB D1 -6.65 dBm 0
-10
-20
-30
-40
-50
-60
-70
-80
-90 Center 2.44 GHz 300 kHz/
Span 3 MHz SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 41 of 52 6dB Bandwidth_BLE_2480_Ant1 Ref 10 dBm
*
Att 20 dB SWT 5 ms 2.480351000 GHz
* RBW 100 kHz Marker 3 [T1 ]
* VBW 300 kHz
-6.97 dBm 1 Marker 1 [T1 ]
-0.63 dBm 2.480018000 GHz A 2 3 Marker 2 [T1 ]
-7.01 dBm 2.479661000 GHz LVL 10 Offset 1.1 dB D1 -6.63 dBm 1 PK VIEW 0
-10
-20
-30
-40
-50
-60
-70
-80
-90 3DB Center 2.48 GHz 300 kHz/
Span 3 MHz 2.Maximum peak conducted output power Test Mode Test Channel Ant Power[dBm]
Limit[dBm]
Verdict BLE BLE BLE 2402 2440 2480 Ant1 Ant1 Ant1
-0.8
-0.68
-0.68
<30
<30
<30 PASS PASS PASS 1 PK VIEW 1 PK VIEW SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 42 of 52 Maximum peak conducted output power_BLE_2402_Ant1 Ref 10 dBm
*
Att 20 dB
*
*
SWT 100 ms 2.402170000 GHz
*
RBW 3 MHz Marker 1 [T1 ]
*
VBW 10 MHz
-0.80 dBm 10 Offset 1.1 dB 1 0
-10
-20
-30
-40
-50
-60
-70
-80
-90 Center 2.402 GHz 1 MHz/
Span 10 MHz Maximum peak conducted output power_BLE_2440_Ant1 Ref 10 dBm
*
Att 20 dB
*
*
SWT 100 ms 2.439800000 GHz
*
RBW 3 MHz Marker 1 [T1 ]
*
VBW 10 MHz
-0.68 dBm 10 Offset 1.1 dB 1 0
-10
-20
-30
-40
-50
-60
-70
-80
-90 Center 2.44 GHz 1 MHz/
Span 10 MHz A LVL 3DB A LVL 3DB SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 43 of 52 Maximum peak conducted output power_BLE_2480_Ant1 Ref 10 dBm
*
Att 20 dB
*
*
SWT 100 ms 2.479610000 GHz
*
RBW 3 MHz Marker 1 [T1 ]
*
VBW 10 MHz
-0.68 dBm 10 Offset 1.1 dB 1 1 PK VIEW 0
-10
-20
-30
-40
-50
-60
-70
-80
-90 A LVL 3DB Center 2.48 GHz 1 MHz/
Span 10 MHz 3.Maximum Peak power spectral density Test Mode Test Channel Ant PSD[dBm/3kHz]
Limit[dBm/3kHz]
Verdict BLE BLE BLE 2402 2440 2480 Ant1 Ant1 Ant1
-14.01
-13.86
-14.02
<8.00
<8.00
<8.00 PASS PASS PASS SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 44 of 52 Maximum Peak power spectral density_BLE_2402_Ant1 1 PK VIEW 1 PK VIEW Ref 10 dBm
*
Att 20 dB SWT 170 ms 2.402006000 GHz 10 Offset 1.1 dB
*
RBW 3 kHz Marker 1 [T1 ]
*
VBW 10 kHz
-14.01 dBm 1 0
-10
-20
-30
-40
-50
-60
-70
-80
-90 Center 2.402 GHz 150 kHz/
Span 1.5 MHz Maximum Peak power spectral density_BLE_2440_Ant1 Ref 10 dBm
*
Att 20 dB SWT 170 ms 2.440004500 GHz 10 Offset 1.1 dB
*
RBW 3 kHz Marker 1 [T1 ]
*
VBW 10 kHz
-13.86 dBm 1 0
-10
-20
-30
-40
-50
-60
-70
-80
-90 Center 2.44 GHz 150 kHz/
Span 1.5 MHz A LVL 3DB A LVL 3DB SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 45 of 52 Maximum Peak power spectral density_BLE_2480_Ant1
*
RBW 3 kHz Marker 1 [T1 ]
*
VBW 10 kHz
-14.02 dBm Ref 10 dBm
*
Att 20 dB SWT 170 ms 2.480009000 GHz 10 Offset 1.1 dB 1 A LVL 3DB 1 PK VIEW 0
-10
-20
-30
-40
-50
-60
-70
-80
-90 Center 2.48 GHz 150 kHz/
Span 1.5 MHz 4.Band-edge for RF Conducted Emissions Test Mode BLE BLE Test Channel 2402 2480 Ant Ant1 Ant1 Carrier Power[dBm]
Max. Spurious Level
[dBm]
Limit
[dBm]
Verdict
-0.540
-0.690
-41.689
<-20.54 PASS
-51.511
<-20.69 PASS SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 46 of 52 Band-edge for RF Conducted Emissions_BLE_2402_Ant1 Ref 10 dBm
*
Att 20 dB SWT 10 ms 2.384448000 GHz
*
RBW 100 kHz Marker 4 [T1 ]
*
VBW 300 kHz
-41.69 dBm 10 Offset 1.1 dB 1 PK VIEW 0
-10
-20 D1 -20.54 dBm
-30
-40
-50
-60
-70
-80
-90 Marker 1 [T1 ]
-0.54 dBm 1 2.402073000 GHz A Marker 2 [T1 ]
-45.74 dBm 2.400000000 GHz LVL Marker 3 [T1 ]
-57.53 dBm 2.390000000 GHz 4 3 2 3DB Start 2.31 GHz 9.4 MHz/
Stop 2.404 GHz Band-edge for RF Conducted Emissions_BLE_2480_Ant1 Ref 10 dBm
*
Att 20 dB SWT 10 ms 2.483522000 GHz
*
RBW 100 kHz Marker 4 [T1 ]
*
VBW 300 kHz
-51.51 dBm 10 Offset 1.1 dB 1 1 PK VIEW 0
-10
-20 D1 -20.69 dBm Marker 1 [T1 ]
-0.69 dBm 2.480024000 GHz A Marker 2 [T1 ]
-54.44 dBm 2.483500000 GHz LVL Marker 3 [T1 ]
-59.97 dBm 2.500000000 GHz 4 2 3DB 3
-30
-40
-50
-60
-70
-80
-90 Start 2.478 GHz 2.2 MHz/
Stop 2.5 GHz SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 47 of 52 5.RF Conducted Spurious Emissions Test Mode Test StartFre StopFre RBW Channel
[MHz]
[MHz]
[kHz]
VBW
[kHz]
Pref[dBm]
Max. Level
[dBm]
Limit
[dBm]
Verdict BLE BLE BLE BLE BLE BLE 2402 30 10000 1000 3000
-0.6
-34.750 <-20.6 PASS 2402 10000 25000 1000 3000
-0.6
-40.910 <-20.6 PASS 2440 30 10000 1000 3000
-0.3
-36.260 <-20.3 PASS 2440 10000 25000 1000 3000
-0.3
-40.430 <-20.3 PASS 2480 30 10000 1000 3000
-0.54
-36.580 <-20.54 PASS 2480 10000 25000 1000 3000
-0.54
-40.620 <-20.54 PASS Pref CSE_1 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 48 of 52 RF Conducted Spurious Emissions_BLE_2402_Ant1 Ref 10 dBm
*
Att 20 dB SWT 10 ms 2.402000000 GHz
*
RBW 100 kHz Marker 1 [T1 ]
*
VBW 300 kHz
-0.60 dBm 10 Offset 1.1 dB 1 PK VIEW 1 0
-10
-20 D2 -20.6 dBm
-30
-40
-50
-60
-70
-80
-90 A LVL 3DB Start 2.4 GHz 10 MHz/
Stop 2.5 GHz Ref 10 dBm
*
Att 20 dB SWT 200 ms 4.803137500 GHz
*
RBW 1 MHz Marker 2 [T1 ]
*
VBW 3 MHz
-34.75 dBm Marker 1 [T1 ]
-0.95 dBm 2.401613750 GHz A LVL 3DB 2 10 Offset 1.1 dB 1 1 PK VIEW 0
-10
-20 D2 -20.6 dBm
-30
-40
-50
-60
-70
-80
-90 Start 30 MHz 997 MHz/
Stop 10 GHz SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 49 of 52 Ref 10 dBm
*
Att 20 dB SWT 300 ms 24.758125000 GHz 10 Offset 1.1 dB
*
RBW 1 MHz Marker 1 [T1 ]
* VBW 3 MHz
-40.91 dBm CSE_2 Pref 1 PK VIEW 0
-10
-20 D2 -20.6 dBm
-30
-40
-50
-60
-70
-80
-90 A LVL 1 3DB Start 10 GHz 1.5 GHz/
Stop 25 GHz RF Conducted Spurious Emissions_BLE_2440_Ant1 Ref 10 dBm
*
Att 20 dB SWT 10 ms 2.440000000 GHz
*
RBW 100 kHz Marker 1 [T1 ]
*
VBW 300 kHz
-0.30 dBm 10 Offset 1.1 dB 1 1 PK VIEW 0
-10
-20 D2 -20.3 dBm
-30
-40
-50
-60
-70
-80
-90 Start 2.4 GHz 10 MHz/
Stop 2.5 GHz A LVL 3DB SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 50 of 52 Ref 10 dBm
*
Att 20 dB SWT 200 ms 4.880405000 GHz
*
RBW 1 MHz Marker 2 [T1 ]
*
VBW 3 MHz
-36.26 dBm CSE_1 CSE_2 Marker 1 [T1 ]
-0.83 dBm 2.440247500 GHz A LVL 3DB 2 10 Offset 1.1 dB 1 1 PK VIEW 0
-10
-20 D2 -20.3 dBm
-30
-40
-50
-60
-70
-80
-90 Start 30 MHz 997 MHz/
Stop 10 GHz Ref 10 dBm
*
Att 20 dB SWT 300 ms 24.443125000 GHz 10 Offset 1.1 dB
*
RBW 1 MHz Marker 1 [T1 ]
* VBW 3 MHz
-40.43 dBm 1 PK VIEW 0
-10
-20 D2 -20.3 dBm
-30
-40
-50
-60
-70
-80
-90 A LVL 1 3DB Start 10 GHz 1.5 GHz/
Stop 25 GHz Pref CSE_1 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 51 of 52 RF Conducted Spurious Emissions_BLE_2480_Ant1 Ref 10 dBm
*
Att 20 dB SWT 10 ms 2.480050000 GHz 10 Offset 1.1 dB
*
RBW 100 kHz Marker 1 [T1 ]
*
VBW 300 kHz
-0.54 dBm 1 1 PK VIEW 0
-10
-20 D2 -20.54 dBm
-30
-40
-50
-60
-70
-80
-90 A LVL 3DB Start 2.4 GHz 10 MHz/
Stop 2.5 GHz Ref 10 dBm
*
Att 20 dB SWT 200 ms 4.960165000 GHz
*
RBW 1 MHz Marker 2 [T1 ]
*
VBW 3 MHz
-36.58 dBm Marker 1 [T1 ]
-0.82 dBm 2.480127500 GHz A LVL 3DB 2 10 Offset 1.1 dB 1 1 PK VIEW 0
-10
-20 D2 -20.54 dBm
-30
-40
-50
-60
-70
-80
-90 Start 30 MHz 997 MHz/
Stop 10 GHz CSE_2 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190601549702 Page: 52 of 52 Ref 10 dBm
*
Att 20 dB SWT 300 ms 24.763750000 GHz 10 Offset 1.1 dB
*
RBW 1 MHz Marker 1 [T1 ]
* VBW 3 MHz
-40.62 dBm 1 PK VIEW 0
-10
-20 D2 -20.54 dBm
-30
-40
-50
-60
-70
-80
-90 A LVL 1 3DB Start 10 GHz 1.5 GHz/
Stop 25 GHz
- End of the Report -
1 | Test Setup Photos | Test Setup Photos | 796.46 KiB | August 08 2019 |
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 3 Setup Photos for SZEM1906015497CR FCC ID: 2ANQ2BOND002 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 3 1 Photographs 1.1 Radiated Spurious Emissions Test Setup SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 3
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-08-08 | 2402 ~ 2480 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2019-08-08
|
||||
1 | Applicant's complete, legal business name |
Bond Touch Inc.
|
||||
1 | FCC Registration Number (FRN) |
0026834671
|
||||
1 | Physical Address |
622B Santa Cruz Ave.
|
||||
1 |
Menlo Park, CA
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
U******@SGS.COM
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2ANQ2
|
||||
1 | Equipment Product Code |
BOND002
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
C**** D******
|
||||
1 | Telephone Number |
+1 41********
|
||||
1 | Fax Number |
+1 41********
|
||||
1 |
c******@impossible.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd.
|
||||
1 | Name |
K**** X******
|
||||
1 | Physical Address |
No.1 Workshop, M-10, Middle Section
|
||||
1 |
Shenzhen, 518057
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
86 75********
|
||||
1 | Fax Number |
86 75********
|
||||
1 |
k******@sgs.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd.
|
||||
1 | Name |
J****** S****
|
||||
1 | Physical Address |
No.1 Workshop, M-10, Middle Section
|
||||
1 |
Shenzhen, 518057
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
86 75********
|
||||
1 | Fax Number |
86 75********
|
||||
1 |
J******@sgs.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Bond Touch | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | The listed output power is conducted. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd
|
||||
1 | Name |
K******** X********
|
||||
1 | Telephone Number |
+86 (********
|
||||
1 |
K******@sgs.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0009000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC