80*120mm. 80g paper(80
---. AZORES Packing list:
Power Adpater User manual Ethernet cable AX1500 Wi-Fi 6 MESH AP Wi-Fi 6 Please contact your service provider if any item is missing QUICK INSTALLATION GUIDE Step One: Power on the Router and Connect To the Internet 1Connect the Router to a power source 2Connect the Ethernet interface from a DSL/PON/Cable Gateway to any Ethernet port of the Wi-Fi 6 Router through a network cable. 3 4 1000M WAN/LAN 1 Power 2 WPS ON/OFF DSL/PON/Cable Gateway 10G_PON 10G_LAN GE Reset ON/OFF Power Connect the Ethernet interface to any Ethernet port Internet access on the wall or Step Two: Plug and Play 1Wi-Fi6 Router is ready when its LED light shows steady Green. 2Look for Wi-Fi network name (SSID) and key (password) on the bottom of the Router. Connect a wireless device (for example Wi-Fi enabled computer or mobile phone) to the Wi-Fi 6 router. Alternatively, connect a wired device by inserting a network cable to any of the Wi-Fi 6 routers Ethernet ports. Reset Reset Product nameWiFi 6 AP Product modelWA6-BF0WW IP192.168.0.1 SSID(2.4G)WiFi6AP- XXXX SSID(5G) WiFi6AP-XXXX-5G PasswordXXXXXXXX S/N: XXXXXXXXXXXX MAC: XX:XX:XX:XX:XX:XX Made in China If changing the Wi-Fi SSID and/or password, please refer to the following steps:
Wi-Fi Settings 1Set up either a wireless or wired connection as indicated in Step One and Step Two. Launch a web browser and enter http://192.168.0.1 in the address bar. 1 2 2You need to set the login password when you enter the page for the first time. And then click Next. Note: if you forgot the Broadband account and Password, you can contact to broadband network provider (AIS) to get these 5Click Complete, finishing the settings. information. Note: if click Skip, default choosing DHCP . 4Changing the Wi-Fi Network Name and Password The router default selects The password is the same as the login password. It means new Wi-Fi password is the same as login password, click Next. When Setup Succeed, click Confirm, it will jump to the login page. 3Internet Configuration Settings Connect a cable from your PON/DSL/Cable gateway to the Wi-Fi 6 router, and choose DHCP, after click Next, the Wi-Fi router is ready. If PPPoE is required alternatively, connect a cable from your PON/DSL/Cable gateway to the Wi-Fi 6 router and Choose PPPoE, and then enter the Broadband account and Password, and click Next. If not select The password is the same as the login password, you can mobile device, find the routers new Wi-Fi network name (ssid), and use Open the Wi-Fi connection manager on your Wi-Fi-enabled computer or enter a different Wi-Fi password in the password field, click Next. the routers new password to connect. LED Indicates Behavior Connection to the power supply Red initially, then blinking green Power on, no network Blinking Red Power on, network being connected Blinking Green The router is ready Steady Green WPS (Press WPS button or click WPS on the web page). WPS or Mesh pairing action is in progress. Blinking Blue WPS or Mesh paring action is successful Steady Blue for 1min, then blue light goes o Blue light o 5 3 4 If click Skip, Wi-Fi information still as shown on the label. WPS action failed 6 FREQUENTLY ASKED QUESTIONS 1. Why cant I access the web based configuration?
Answer(1) Check the connection between the Network cable and the Wired device. Check correct Wi-Fi connection in the wireless device.
(2) Check your IP Address. Your computer must have an IP Address in the same range of the device you are attempting to configure. If not, the resolve solution isSetting the computers TCP/IP to Obtain an IP address automatically and Obtain DNS server address automatically .
(3) Check URL in browserLaunch a web browser and enter the routers IP Address (192.168.0.1), enter the login password and then the home page displays. 2. If forgot the login password, what to do?
AnswerYou can use a needle to press the Reset button on the bottom of the router and keep pressing more than 10s before you release the button. The router will restart for 2~3mins and finish restore factory setting. Then you can enter http://192.168.0.1 to reset the login password. 3. Wi-Fi enabled device can connect the router, but there is no network. What to do?
Answer:
(1) Check the Ethernet cable connection to your DSL/PON/Cable gateway.
(2) If PPPoE is chosen, you need to check if you enter the right broadband account and password.
(3) Make sure your broadband account is active, contact your service provider.
(4) If all above are ok, please restart the router. Power off after 10s, then power on the router. AZORES W37A 709-0000-0000 0000000 FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body. Operations in the 5.15-5.25GHz band are restricted to indoor use only.