TM TM Front Indicator Light Micro USB Por t USB Replaceable Hydrogel Ear Electrode Replaceable Hydrogel Forehead Electrode Power Button Side Indicator Light L I S T Focus 1 Headband*1 USB Cable* 1 Replacement Electrodes*6 Product Pouch*1 Sterile Saline Wipes*20 User Manual 7 Unti-Slip belt*1 8 Sheatline* 1 Magic Tape* 1
*1 USB *1
*6
*1
*20
*1
*1
*1 7 8 P o w e r B u t t o n Power On Remove the charging cable, press and hold the power button until all of the 5 white indicator lights turn on; Note: Headband cannot be used if the batter y is depleted;
5 Power O When in use, press and hold the power button until all of the 5 white indicator lights turn o ;
5 Batter y Checking While not charging, quickly press the power button and release, the side indicators glow according to thecurrent batter y level;
WiFi Reset (for Retail version only) When in use, press and hold the power button until all of the 5 white indicator lights turn OFF and turn ON AGAIN;
WiFi 5 Notice: If the Headband does not work properly, remove the charging cable, press and hold the power button for 20 seconds, then release the power button and the Headband will go into Power OFF status;
20 power on turn on one by one from left to right power o pairing working charge reset turn o one by one from right to left cycle back and for th repeatedly
ash from left to right individually Each fully lit indicator represents 20% of the total power. A blinking light shows the current charging status. 20%
Flash from middle to side Front Indicator Light distracted
/ver y relaxed calm focus glows solid green glows solid yellow glows solid red Waiting for wi connection wifi hear tbeats white Waiting for APP/
Software connection glows solid white Side Indicator Light PUTTING ON Put the Focus 1 on your head and adjust the Headband to ensure the correct orientation for proper t and correct electrode placement. Notice: Make sure that both electrodes and your skin are clean and have direct contact with each other. CHARGING To charge the Headband, plug the charging cable into the USB por t on your computer or other power source. The LED indicator lights will progressively illuminate on your Focus1 as it charges. Each steady light represents 20% of the maximus charge. Once all ve lights glow solid white light, the Headband will be fully charged. USBUSB LED 20%5 Notice: Please use the USB cable included in the package to avoid any charging problems. USB Please wipe your electrodes weekly with the sterile saline wipe included to keep the electrodes clean and extend their lifetime. 1. Store at room temperature (25C, 50%), and do not put the electrodes into water or re. 2. Avoid contact acidic, basic,toxic, nad erosive materials and chemicals. 3. Please follow the instruction in the picture below, and wipe the electrode gently ; please contact the agency to purchase more wipes. 1. 2550%
2. 3. Replace the hydrogel electrodes when necessar y to ensure signal quality. The recommended time is 6 months. 6 1. While replacing the electrodes, please pay attention to the groove on the bottom of the electrode that shows the proper placement direction. Please contact the agency to purchase more. 2. Do not put the used electrodes into water or re. 1. 2. Weight 95g Head Circumference 55-75cm Operating Temperature 0 -40C(32-104 ) Batter y Capacity 400 mAh Batter y Life Up to 4 hours Batter y Charge Time 1-1.5 hour Wireless Connection Wi-Fi IEEE 802.11 b/g/n 2.4GHz Electrode Material Hydrogel 95 55-75 0-4032-104 400 4 1-1.5 Wi-Fi I EEE 802.11b/g/n 2.4G SAFETY INSTRUCTION Before using your Focus 1 headband, please read the following safety instructions. This will ensure correct usage. After reading this manual, store it in a safe place for future reference. IMPORTANT:
Please use the accessories included in your purchase. Due to voltage and current requirements (5V,200mA), please use the USB cable that was included in your Product Pouch. WARNING 1. Focus 1 headband contains hydrogel electrodes. Please see a doctor if swallowed. 2. Please store your Focus 1 headband in the Product Pouch when it is not in use. Keep children and pets away from the product. 3.Please follow the instructions below before using your Focus 1 headband:
- Before using, please read the User Manual carefully.
- Watch your child when she/he is using this product.
- Do not expose this product to water, rain, or any liquid.
- Use of a power supply or charger not recommended or sold by an authorized manufac-
turer may result in a risk of re or injur y.
- Do not attempt to use a damaged or modied Focus 1 headband. A damaged or modied Focus 1 headband may cause a re or unknown danger.
- Do not dispose of your Focus 1 headband in a re or heat. The product could explode in a re or high temperatures over 100 .
- Ser vicing can only be per formed by a qualied repair person using identical replace-
ment par ts. 4. This product contains small par ts which may be a choking hazard. Not suitable for children under age 6. 5. Do not tamper with your Focus 1 headband without authorization. 6. Use this product only with an agency approved power supply which meets local regulator y requirements (e.g., UL, CSA, VDE, CCC). 7. Do not expose this product, which contains batteries, to excessive heat (e.g. storage in direct sunlight, re or any similar environment). 8. If you are under 18 years old, please read this document with your guardians and pay attention to all warnings.
/USB 5V,200mA,USB
/
1. 2. 3.
-
-
-
-
-
-100
-
4. 6 5. 6. ULCSAVDECCC 7. 8. 18 DISCLAIMER Since this manual lists safety instructions in detail, please read it carefully before using your Focus 1 headband. Impor tant warning:
16 26 3
/
1. Do not allow children under 6 to use this product. 2. Children above 6 are allowed to use this product with a parents or teacher s super vision to prevent injuries. 3. The product and its accessories including the hydrogel electrodes are all inedible. The responsibility for any risks and consequences arising from the violation of this Safety Manual are borne by the users and their guardians. The manufacturer, developer, and seller assume no responsibil-
ity for any of those risks and consequences. REGULATORY COMPLIANCE UNITED STATES:
FCC Regulator Statemengts This device complies with Par t 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful inter ference, and(2) this device must accept any inter ference received, including inter ference that may cause undesired operation. Changes or modications not expressly approved by the par ty responsible for compliance could void the user s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Par t 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter ference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful inter ference to radio communications. However, there is no guarantee that inter ference will not occur in a par ticular installation. If this equipment does cause harmful inter ference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to tr y to correct the inter ference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/T V technician for help. This equipment complies with FCC radiation exposure limits set for th for an uncontrolled environment. End user must follow the specic operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 17 18 The por table device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value repor ted under this standard during produc t cer tification for use when properly worn on the body with the munimum distance 0mm. CANADA:
IC Regulator Statemengts This device contains licence -exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence -exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause inter ference. 2. This device must accept any inter ference, including inter ference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1. Lappareil ne doit pas produire de brouillage;
2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Cet quipement est conforme aux limites dexposition aux rayonnements ISED tablies pour un environnement non contrl. Lutilisateur nal doit suivre les instructions spciques pour satisfaire les normes. Cet metteur ne doit pas tre co-implant ou fonctionner en conjonction avec toute autre antenne ou transmetteur. Le dispositif por tatif est conu pour rpondre aux exigences dexposition aux ondes radio tablie par le dveloppement nergtique DURABLE. Ces exigences un SAR limite de 1,6 W/kg en moyenne pour un gramme de tissu. La valeur SAR la plus leve signale en ver tu de cette norme lors de la cer tification de produit utiliser lorsquil est correc tement por t sur le corps avec la distance minimale 0mm. EUROPE:
BrainCo Inc. hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other EU directive requirements. This equipment complies with ISED radiation exposure limits set for th for an uncontrolled environment. End user must follow the specic operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal ser vice. The por table device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value repor ted under this standard during product cer tification for use when properly worn on the body with the munimum distance 0mm. 19 20