50mm 70mm Wireless Shower Speaker Tips:
- Please make sure the speaker is in power off mode when trying to activate the pairing mode.
- Turn on your mobile phone and activate the bluetooth function.
- Search for Bluetooth devices BTS-06 will show.
- Pair your device with BTS-06. If password is needed, type in 0000. After BTS-06 is paired with your device, connect it to your device.
- Fully charge speaker before first use Once this speaker is paired and connected to your mobile device, next time when you switch on this speaker, it will connect to your mobile devices automatically as long as the bluetooth in your mobile device is on. Troubleshooting Symptoms Causes Solutions Cannot switch the speaker on Unable to pair the speaker Battery empty Charge the battery Speaker is already switched on and it is not in pairing mode Refer to the section of Pairing BTS-06 to mobile phone or other device Technical Specifications Ver 1.0 10 meters (equal to 33 feet) 2W Bluetooth version 4.2 Hardware Range Frequency range 2.402-2.48GHz Charging input power DC 5V/1.0A Max. output power RF max. output power 3.58dBM Battery Charging time Working time Unit weight IP grade Bluetooth firmware Bluetooth software 3.7v, 300mAh lithium Approx. 3 hours Approx. 4 hours Approx. 129g IPX4 Ver 3.2 Ver 4.0 Supplied by Brand Addition Ltd., Broadway House, Trafford Wharf Road, Manchester M17 1DD, United Kingdom Made In China Model number BTS-06 Batch number PPI019393 FCC ID: 2ALSKBTS-06 FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. Safety instructions Product overview Read this manual carefully before putting the appliance into operation and keep this manual for future reference.
- Keep the device away from heat, direct sunlight and sharp edges.
- Keep the device away from naked flames.
- Do not insert any metal object into the device. Risk of short circuit.
- To avoid a static charge, do not use the device in an extremely dry climate.
- Do not repair the unit yourself but contact an authorised specialist (danger of explosion if the battery is incorrectly replaced). The authorised specialist should replace only with the same or equivalent battery type.
- Do not immerse product in any liquid to avoid short circuits.
- Avoid placing the speaker in direct contact with flowing water.
- For best results apply suction cup to a smooth, flat surface. Button description On/off, to switch on or off. Short press for the previous song, long press for turning down the volume. Short press for the next song, long press for turning up the volume. Phone, to pick up or hang up a phone call. Play /Pause the music. Notes & tips
- You can press phone button twice quickly to redial the last phone call. Accessories included USB charging cable Integrated battery This Wireless speaker is powered by integrated rechargable lithium battery. Charge the integrated battery as follows
- Insert the charging cable into the DC 5V socket on the unit, connect the USB plug into a PC or AC/DC adaptor. The LED indicator turns red when the battery is being charged.
- When the battery is fully charged, the red LED indicator goes out. Pairing BTS-06 to mobile phone or other device Activate the Wireless Speakers pairing mode in power off mode, press and hold the on/off button for about 6 seconds until the blue LED is flashing. Now the speaker is ready for pairing. LYNX wireless speaker, manual, USA author date version scale key colours nishes fonts fonts notes Mafalda Goncalves 19.05.2017 1 1:1 trim line bleed line safe line fold line none none none none by