FCC ID: 2BBPJ-ECBM-15W Wireless Charger

ECBM-15W Wireless charging Alarm User Manual 1 2 Thanks for choosing us; this is a smart phone 15W /3coils wireless charger. Please kindly read the user manual before using and keep it for future reference. Specification TYPE-C Input12V/2A Wireless Output (Standard Model): 5W for all Qi standard wireless RX Wireless Output (Fast Model): 7.5W for IPHONE Wireless Output (Fast Model): 10W for Samsung Wireless Output (Fast Model): 15W for Qi EPP certificate Mobiles 3 Coils: 1 Coil* 3 Charging distance: 8mm Frequency: 115KHZ - 205KHZ Standard: Qi1.3.2 Conversion Rate for wireless charging: up to 80%

LED Panel for status indicator Product Size: L*W*H=125*60*10mm Product Outline and Power Supply M button; + button; button , operating button. USB-A output port: Output 5V/2A ECBM-15W Wireless charging Alarm User Manual 2 2 Notes:

1. Do not squeeze or collied. 2. Do not disassemble or throw into fire or water, to avoid causing a short circuit leakage. 3. Do not use wireless charger in severely hot, humid or corrosive environments, to avoid circuit damage and occur leakage phenomenon. 4. Do not place too close with magnetic stripe or chip card (ID card, bank card, etc.) to avoid magnetic failure. 5. Please keep the distance at least 20cm between implantable medical devices (pacemakers, implantable cochlear, etc.) and the wireless charger, to avoid potential interference with the medical device. 6. To take care of the children, to ensure that they won't play the wireless charger as a toy, to avoid unnecessary accidents. 7. Please keep the charger away from water or other. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equip ment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. FCC ID: 2BBPJ-ECBM-15W

2AOPC-ECBM-15W Input : 12V/2A Output : 5W/7.5W/10W/15W

~ 40.00mm 12.50mm <a 2AOPC-ECBM-15W Input : 12V/2A Output : SW/7.5W/10W/15W FCC ID:2BBPJ-ECBM-15W 2BBP) FCC ID:2BBPJ-ECBM-15W

Dongguan Juyuan Precision Technology Co., LTD Specificaton Approval Customer SHENZHEN EPQI TECHNOLOGY CO., LTD Customer P/N Model A28 three coil module Issue Date Document Rev. A0

/Make/Date Customer Signatures Precheck By:

Checked By:

Approved By:

Inner Signatures Department:

ED QC SD Approvde By Mfrs. Dongguan Juyuan Precision Technology Co., Ltd Add. Village Committee Central Industrial Zone, No. 75 Dongfeng South Road, Shijie Town, Dongguan City, Guangdong Province Tel +860769 82297538 Fax +860769 82297548 E-mail zhihu.xie@jycoil.cn Change Version1.0.0 change directory Change The Detail part 1 of 5 Change items Before modification After modification modification date Modify personnel Version1.0.0 part 2 of 5 Specifications Reference Designs Model Number A28 three coil module Customer P / N Supplier P / N Appearance Sizeunit/mm 19.50.5 27.50.5 40.51 49.51 52.50.5 94.40.5 131 4MAX 51 51 10.2 4.5MAX A B C D E F G H I J K L M N O P Q R S T U V W X Y Z Version1.0.0 part 3 of 5 Specifications Reference Designs Schematic Diagram Winding Parameters Winding Start Finish Turns Line Diameter L1 L2 L3 S S S F F F 9TS 0.08*105P 9TS 0.08*105P 9.5TS 0.08*105P Winding Way Dense winding Dense winding Dense winding Winding Direction Layer&Circl e clockwise 11st floor/9TS anticlockwise 11st floor/9TS anticlockwise 11st floor/9.5TS Electrical Characteristics Item Terminal Test Conditions Test Instrument Parameter Unit Numerical Value indu ctance Q value resis tance S-F 100KHz/1.00V/100 1062 bridge Inductance

@100KHz/1V H 7.2H10%

S-F 100KHz/1.00V/100 1062 bridge Q@100KHz/1V 70MIN S-F 100KHz/1.00V/100 1062 bridge DCR@100KHz/1 V m 60MAX

Brandmotion, LLC DateJune 15, 2023 Product Model Number: ECBM-15W FCC ID2BBPJ-ECBM-15W To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:

Testing Approval applications and procedures We declare that ORGANIZATION. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by ORGANIZATION. on our behalf shall have the same effect as acts of our own. By:

Contact Listed on FCC Wesbite Title: CEO Email: jvarick@brandmotion.com Telephone: 743-619-1250 On behalf of: 41100 Bridge Street Novi, MI 48375, USA Effective Date: April 2, 2020 Revision Date:

QSF 7.6.4-8 Agent Authorization Letter Template Revision: 0 Page 1 of 1

Brandmotion, LLC Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2BBPJ-ECBM-15W To Whom It May Concern, Date: June 15, 2023 Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: John F. Varick Title: CEO

Model difference statement June 15, 2023 We Brandmotion, LLC Of 41100 Bridge Street Novi, MI 48375, USA Product: Wireless Charger Model Number: ECBM-15W, ECBM-15WU Except for the appearance color, all models have the same circuit and module. Sincerely, John F. Varick/CEO E-mail:

Phone:

Fax:

Address

jvarick@brandmotion.com 743-619-1250 743-619-1250

: 41100 Bridge Street Novi, MI 48375, USA

Address41100 Bridge Street Novi, MI 48375, USA Brandmotion, LLC Date: 2023-06-15 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(7) Filing SUBJECT: FCC Application for FCC ID: 2BBPJ-ECBM-15W Brandmotion, LLC certifies that, as of the date of the filing of the application, Brandmotion, LLC is our designated U.S. agent for service of process for the above referenced FCC ID. Brandmotion, LLC accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Brandmotion, LLC accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information:

FRN: 0033897950 Name: Brandmotion, LLC Address: 41100 Bridge Street Novi, MI 48375, USA Contact Person: John F. Varick Tel.: 743-619-1250 Email: jvarick@brandmotion.com Sincerely, Signed on behalf of Brandmotion, LLC Signed on behalf of Brandmotion, LLC Name:

Title: CEO Name:

Title: CEO Date: 2023-06-15 Date: 2023-06-15

Brandmotion, LLC Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023-6-15 FCC ID: 2BBPJ-ECBM-15W Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing Brandmotion, LLC certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing Brandmotion, LLC certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Applicant: Brandmotion, LLC Address: 41100 Bridge Street Novi, MI 48375, USA Contact Person: John F. Varick Tel.: 743-619-1250 Email: jvarick@brandmotion.com Sincerely, Signature: