FCC ID: USQ3768 Electric Toothbrush Charger

HIGHLY RESTRICTED MC M7-9 UI Sonos Use Instructions NA region English Master comments Translation required in: Spanish, French 1 iO www.oralb.com www.oralb.ca www.braun.com www.service.braun.com Braun GmbH Frankfurter Strasse 145 61476 Kronberg Germany/Alemania/Allemagne Charger Type 3768 Handle Type 3758 Travel Case Type 3759 Power Cord Type 492-xxxx 90791650/XI-19 EN/E/F Description 1 Brush head 2 Brush head identification symbol 3 Smart Pressure Sensor 4 Interactive Display 5 Handle 6 Charger 7 On/off button 8 Mode button 9 Interactive Display features 10 Daily Clean mode 11 Sensitive mode 12 Gum Care mode 13 Whitening mode 14 Intense Clean mode 15 Super Sensitive mode 16 Tongue Clean mode 17 Settings menu 18 Settings menu features 19 Manage Bluetooth settings Commercial name websites Legal manufacturer Type numbers PMP#, current date, languages (2D code) n/a n/a n/a n/a 2 20 Select/Change color of Smart Pressure Sensor 21 Select/Change language 22 Perform factory reset 23 Feedback features 24 Timer 25 Battery status 26 Exchange reminder 27 Brush feedback Accessories and features:

a Smart Pressure Sensor features b Customize color of Smart Pressure Sensor via Oral-B App c Brush head Ultimate Clean d Brush head Gentle Care e Brush head holder with cap f Brush head holder stand g Travel case h Charging travel case h1 Charging light h2 Power cord (power supply) i Download Oral-B App and connect to Bluetooth (see back page) Note: Content may vary based on the model purchased. IMPORTANT SAFEGUARDS When using electrical products, especially when children are present, basic safety precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING DANGER In order to reduce the risk of electrocution:

1. Do not use while bathing. 2. Do not place or store the charger, power cord or charging travel case where it can fall or be pulled into a tub or sink. 3. Do not place the charger, power cord or charging travel case in water or other liquid. added Dec 11th 3 4. Do not reach for a charger, power cord or charging travel case that has fallen into water. Unplug immediately. WARNING To reduce the risk of burns, electrocution, fire or injury:

1. Close supervision is necessary when this product is used by, on, or near children or persons with disabilities. 2. Use this product only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer. Only use the charger provided with your appliance. 3. Keep cord away from heated surfaces. 4. Never drop the appliance or insert any object into any opening of the appliance. 5. Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged or if it has been dropped into water. If any of these occur, please contact a service center and return the product for examination and repair. 6. Do not use on self when drowsy or on another who is drowsy or sleeping. 7. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered. IMPORTANT 1. Periodically check the entire product/cords/accessories for damage. A damaged or non-functioning unit should no longer be used. If the product/cords/accessories are damaged, take it to an Oral-B Service Center. 2. Do not touch the power plug with wet hands. This can cause an electric shock. 3. When unplugging, always pull the power plug instead of the cord. Avoid sharp bending, jamming or squeezing of the cord. Never insert any object into any opening of the appliance. 4. Do not modify or repair the product. This may cause fire, electric shock or injury. Consult your dealer for repairs or contact an Oral-B Service Center. 5. This appliance contains batteries that are non-replaceable. The appliance has no user serviceable parts. Do not open and disassemble device except when disposing of the battery. Follow handling and disposal instructions of the battery/

device described in this manual. 6. Do not use on children under age 3. 7. This toothbrush is a personal care device and is not intended for use on multiple patients in a dental practice or institution. For hygienic reasons we recommend the use of individual brush handles and brush heads for each family member. 8. Only use the charger and/or special cord set (power supply) with integrated Safety Extra Low Voltage power supply provided with your appliance. Do not exchange or tamper with any part of it, otherwise there is risk of an electric shock. If charger/charging travel case is marked with special cord set (power supply) with this identification. 9. Small parts may come off, keep out of reach of children. 492-xxxx, only use Braun/Oral-B 4 CAUTION To avoid brush head breakage which may generate a small parts choking hazard or damage teeth:

Prior to each use, ensure the brush head fits well. Discontinue use of the toothbrush, if brush head no longer fits properly. Never use without a brush head. If the toothbrush handle is dropped, the brush head should be replaced before the next use even if no damage is visible Replace brush head every 3 months or sooner if brush head becomes worn. Clean brush head properly after each use (see Cleaning recommendations paragraph). Proper cleaning ensures the safe use and functional life of the toothbrush. If you are undergoing treatment for any oral care condition, consult your dental professional prior to use. SAVE THESE INSTRUCTIONS Important Information This toothbrush, charger and pouch (accessory) contain NdFeB magnets and generate magnetic fields. If you use a medical device or have an implanted medical device, consult with the medical device manufacturer or a physician, if you have questions about safely using your Oral-B iO toothbrush. Your Oral-B toothbrush can be used with your smartphone (find details under Connecting your toothbrush to your Smartphone). To avoid electromagnetic interference and/or compatibility conflicts, deactivate Bluetooth on your toothbrush handle (5) before using it in restricted surroundings, such as aircrafts or specially marked areas in hospitals. Deactivate Bluetooth by entering the Settings menu on the interactive display (4) -> Bluetooth -> disable. Follow the same procedure to reactivate Bluetooth again. Persons with pacemakers should always keep the toothbrush more than six inches (15 centimeters) from the pacemaker while turned on. Anytime you suspect interference is taking place disable Bluetooth. For satisfying RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that 5 have no metallic component in the assembly and must provide at least 7.9 inches (20 cm) separation between the device, including its antenna, and the user's body. Specifications For voltage specifications refer to the bottom of the charging unit. Noise level: 62 dB (A) First use Please wake up your toothbrush by pressing the on/off button (7) and follow the instructions on the interactive display (4) to get started for first time setup. If not further instructed on the display, you may toggle with the mode button (8) and select with the on/off button (7). You may change the settings via the Settings menu (17) at any time. Charging and Operating To charge the battery place the toothbrush on the plugged-in charger (6). The charge level is indicated on the interactive display (4). Once is fully charged (100%) the display turns off. A full charge typically takes 3 hours and enables 12 days of regular brushing (twice a day, 2 minutes). If the battery is running low the motor reduces its speed and the Smart Pressure Sensor (3) shortly blinks in red. Once the battery is empty (0%), the motor stops; it will need at least a 5-minute charge for one usage. Note: In case the battery is empty (display off), charge at least for 30 minutes. You can always store the handle on the plugged-in charger to maintain it at full power; a battery overcharge is prevented by device. Note: Store handle at room temperature for optimal battery maintenance. Caution: Do not expose handle to temperatures higher than 50C / 122F. Using your toothbrush 6 Start Brushing Place the brush head on the handle. A small gap should remain between handle and brush head. Lift the handle off the plugged-in charger or simply pick it up to wake up the handle (display turns on). Wet brush head and apply toothpaste. To avoid splashing, guide the brush head to your teeth before switching the handle on by pressing the on/off button. Note: Display turns off after 20 seconds. You may press the on/off button to activate display again. Guide the brush head from tooth to tooth. Brush the outsides, the insides and the chewing surfaces. Brush all four quadrants of your mouth equally. You may also consult your dentist or dental hygienist about the right technique for you. After Brushing, the display gives you feedback based on your brushing time

(except for Tongue Clean mode). In the first days of using any electric toothbrush, your gums may bleed slightly. In general, bleeding should stop after a few days. Should it persist after 2 weeks, please consult your dentist or dental hygienist. If you have sensitive teeth and/or gums, Oral-B recommends using the Sensitive or Super Sensitive modes (optional in combination with an Oral-B Gentle Care brush head (d)). Timer The timer signals with a short stuttering sound at 30-seconds intervals to move to the next quadrant of your mouth. A long stuttering sound indicates the end of the professionally recommended 2-minute brushing time. The timer memorizes the elapsed brushing time, even when the handle is briefly switched off during brushing. The timer resets if pausing longer than 30 seconds or placing the handle on the plugged-in charger. Within this 30-

second period you may press the mode button to enter the settings menu. Note: During the use of the Oral-B App, the timer may be deactivated for some features. Note: You may also customize the timer settings via Oral-B App. 7 Smart Pressure Sensor features (a) Your toothbrush is equipped with a Smart Pressure Sensor (3) that has various functionalities indicated via different colors of light:

White (default) = Operating indicator (choose individual color via Oral-B App (b)) / Low pressure indicator Red = high pressure indicator / low battery indicator Green = recommended pressure indicator Blue = Bluetooth pairing indicator Orange = Error indicator (follow display messages) Brush with the right pressure indicated with a green light. If too much pressure is applied, it lights up in red reminding you to reduce pressure. If the Smart Pressure Sensor illuminates in white (or your pre-selected color), we recommend applying more pressure. During high pressure the brush head movement will be reduced (in Daily Clean, Intense Clean and Sensitive modes). Periodically check the operation of the Smart Pressure Sensor by pressing moderately on the brush head during use. Note: During the use of the Oral-B App, the Smart Pressure Sensor feedback may be inactive for some features. Note: Smart Pressure Sensor is deactived during Tongue Clean mode. Brushing modes (depending on model) Your toothbrush offers different brushing modes indicated on the display:

Daily Clean Standard mode for daily cleaning Sensitive Gentle, yet thorough cleaning for sensitive areas Gum Care Gentle massage of gums Whitening Polishing for occasional or everyday use Intense Clean For an extraordinary clean feeling (operated with a higher speed) Super Sensitive Super gentle cleaning for extra sensitive areas Tongue Clean Tongue cleaning for occasional or everyday use When operating the Tongue Clean mode, we recommend using a Gentle Care brush head (d). You can brush your tongue either with or without toothpaste. Brush the whole area of your tongue systematically in gentle movements. The recommended brushing time is 30 seconds;

indicated with a flashing light of the Smart Pressure Sensor. 8 Typo corrected Dec 20th, 2019 Mode setting:

You may first choose your default mode by pressing the mode button (8) successively once the handle is awake (display turned on). Select a mode by pressing the on/off button (7). Your toothbrush starts in the selected default mode. You may also change modes during brushing. Note: You may also customize mode settings via Oral-B App. Interactive Display Turn on the interactive display (4) by pressing the on/off button (7). If not further instructed on the display, you may toggle with the mode button and select with the on/off button.

(10-16) Mode selection - toggle by pressing the mode button and select default start mode with on/off button.

(17) Settings - toggle through all modes until you reach the option Settings; to enter press the on/off button:

-> (19) manage Bluetooth settings (de/activate, disable)

-> (20) select/change color of Smart Pressure Sensor

-> (21) select/change language

-> (22) perform factory reset

(24) Timer - displays brushing time. Can be customized via Oral-B App.

(25) Battery status - shows battery status after use, when charging or when battery is low.

(26) Exchange reminder - reminds you when to replace your brush head.

(27) Brush feedback brushing feedback is indicated with a smiley face

(except with Tongue Clean mode). Brush waking when handle is picked up, lifted off the plugged-in charger or when you press the on/off button the handle indicates its readiness. Error messages - outside operating limits: you are operating or charging outside standard temperatures and/or above standard battery current. Brush heads Oral-B offers you a variety of different Oral-B iO brush heads (c/d) that only fit your Oral-B iO toothbrush handle and can be used for tooth-by-

tooth precision cleaning. 9 Some iO Oral-B brush heads feature INDICATOR bristles to help you monitor brush head replacement need. With thorough brushing, twice a day for two minutes, the color will fade halfway approximately within 3 months, indicating the need to exchange your brush head. If the bristles splay before the color recedes, you may exert too much pressure on teeth and gums. In general, we recommend replacing the brush head every 3 months. Connecting your toothbrush to your Smartphone The Oral-B App is available for smartphones running iOS or AndroidTM operating systems. It can be downloaded for free from App StoreTM /

Google Play or you may scan the QR code on the back page of this manual (i). Launch the Oral-B App. It will guide you through the entire Bluetooth pairing procedure. You may also find it under the Apps settings (More ->

Your brush). Note: Oral-B App functionality is limited if Bluetooth is deactivated on your smartphone (for directions please refer to your smartphones user manual). Pairing is indicated via a blue pulsing Smart Pressure Sensor light. Any App instructions will be displayed on your smartphone. You may change Bluetooth settings at any time on your handle via the display -> Settings -> Bluetooth activated/deactivated. Keep your smartphone in close proximity (within 5m distance) when using it with the handle. Make sure the smartphone is safely positioned in a dry place. Note: Your smartphone must support Bluetooth 4.2 (or higher)/Bluetooth Smart in order to pair your handle. Check www.oralbappavailability.co.uk for compatible smartphones and country availability of the Oral-B App. Caution: Follow your smartphones user manual to ensure your phone/charger is designed for use in a bathroom environment. Cleaning recommendations After brushing, rinse your brush head under running water with the handle switched on. Remove the brush head and clean the handle and brush head separately. Make sure water runs inside the top of the handle as well as Typo corrected Dec 20th, 2019 10 inside the brush head. Wipe all parts dry and let them air-dry before reassembling your toothbrush again. Unplug the charger before cleaning. Clean the charger regularly with a damp cloth. Please check individual cleaning instructions for each accessory in its Accessories paragraph. Accessories (depending on model) Charging Travel Case (h) To charge your handle (5) place it in the charging travel case (h) and connect it to an electric outlet, using the extra power supply (h2) provided. The power supply may be used for all global mains voltage ranges (100 240V). The flashing light (h1) of the charging travel case indicates that the handle is charging. Once the handle is fully charged the light turns off. A full charge typically takes 6 hours. The outer and inner case should be cleaned with a damp cloth only. Make sure that the handle and brush head are completely dry before storing in the travel case. 11 Note: Clean stains on travel case surface immediately. Store travel case in a clean and dry place. Travel Case (g) Store the clean and dry toothbrush/brush heads in the travel case (g). The outer and inner case should be cleaned with a damp cloth only. Note: Clean stains on travel case surface immediately. Store travel case in a clean and dry place. Brush head holder stand (f) / Brush head holder with cap (e) You may store your cleaned brush heads on the pins of the brush head holders. Make sure brush heads are dried before placing them in the holder and/or closing the cap. Brush head holders and cap are dishwasher-

safe. Zipper Pouch / Magnetic Pouch Store the clean and dry toothbrush/brush heads in the zipper pouch. The outer and inner case can be cleaned under running water. Store the clean and dry toothbrush along with the brush head holder (e) in the magnetic pouch. Make sure brush heads are dried before placing them into the holder and/or closing the cap. The outer and inner surfaces can be cleaned under running water. Store pouches in a clean and dry place. Note: Clean stains on pouch surfaces immediately. Subject to change without notice. Environmental Notice Product contains batteries and/or recyclable electric waste. For environment protection do not dispose in household waste, but for recycling take to electric waste collection points provided in your country. Battery removal at the end of the products useful life Do not disassemble the product except when disposing of the battery. Run down battery before removing. When taking out the battery for disposal, 12 use protective clothing (gloves, safety glasses, etc.) to omit skin contact whilst leaking batteries. Use caution not to short the positive (+) and negative () terminals. Insulate terminals (e.g. with tape) and put the battery in a plastic bag for disposal. Image may change use as reference only Open the handle as shown, remove the battery and dispose of it according to local environmental regulations. Caution! Opening the handle will destroy the appliance and invalidate the warranty. Information Bluetooth radio module 13 Although all indicated functions on the Bluetooth device are supported, Oral-B does not ensure 100% reliability in connection, and feature operation consistency. Operation performance and connection reliability are direct consequences of each individual Bluetooth device, software version, as well as the operating system of those Bluetooth devices and company security regulations implemented on the device. Oral-B adheres to and strictly implements the Bluetooth standard by which Bluetooth devices can communicate and function in Oral-B toothbrushes. However, if device manufacturers fail to implement this standard, Bluetooth compatibility and features will be further compromised and the user may experience functional and feature-related issues. Please note that the software on the Bluetooth device can significantly affect compatibility and operation. 1) Warranty Exclusions and Limitations This limited warranty applies only to the new products manufactured by or for The Procter & Gamble Company, its Affiliates or Subsidiaries (P&G) that can be identified by the Braun / Oral-B trademark, trade name, or logo affixed thereto. This limited warranty does not apply to any non-P&G product including hardware and software. P&G is not liable for any damage to or loss of any programs, data, or other information stored on any media contained within the product, or any non-P&G product or part not covered by this limited warranty. Recovery or reinstallation of programs, data or other information is not covered under this limited warranty. This limited warranty does not apply to (i) damage caused by accident, abuse, misuse, neglect, misapplication, or non-P&G product; (ii) damage caused by service performed by anyone other than Braun or authorized Braun service location; (iii) a product or part that has been modified without the written permission of P&G, and (iv) damage arising out of the use of or inability to use the Oral-B Smartphone stand/puck, Smartphone mirror holder, or charging travel case (Accessories). 2) Using a smartphone holder Potential Oral-B Accessories included in the package has been designed to provide you with a convenient way to position your smartphone while you are using the Oral-B app. Try multiple orientations of your smartphone in 14 the Oral-B smartphone holder prior to use to determine the best positioning of your smartphone in the holder. Be sure to try this in a manner which will not harm your smartphone if it falls out of the stand. Do not use in automobiles. LIMITATION OF LIABILITY TO THE EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL P&G ITS DISTRIBUTORS OR SUPPLIERS BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL, EXEMPLARY OR PUNITIVE DAMAGES, OF ANY NATURE WHATSOEVER, ARISING OUT OF THE USE OF OR INABILITY TO USE THE ORAL-B ACCESSORIES, INCLUDING, WITHOUT LIMITATION, INJURY TO PERSONS, PROPERTY DAMAGE, LOSS OF VALUE OF ANY THIRD PARTY PRODUCTS THAT ARE USED IN OR WITH THE ORAL-B ACCESSORIES, OR LOSS OF USE OF THE ORAL-B ACCESSORIES OR ANY THIRD PARTY PRODUCTS THAT ARE USED IN OR WITH THE ORAL-B ACCESSORIES, EVEN IF P&G HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. WITHOUT LIMITING THE FOREGOING, YOU UNDERSTAND AND AGREE THAT P&G HAS NO LIABILITY FOR ANY DAMAGE OR DESTRUCTION TO CONSUMER ELECTRONICS DEVICES OR OTHER PERSONAL PROPERTY THAT ARE CONTAINED ON OR EXTERIOR TO THE ORAL-B ACCESSORIES, OR ANY LOSS OF DATA CONTAINED IN THE FOREGOING DEVICES. IN NO EVENT SHALL ANY RECOVERY AGAINST ORAL-B EXCEED THE ACTUAL PRICE PAID FOR THE PURCHASE OF THE PRODUCT. Warranty replacement brush heads Oral-B warranty will be voided if electric rechargeable handle damage is found to be attributed to the use of non-Oral-B replacement brush heads. Oral-B does not recommend the use of non-Oral-B replacement brush heads. Oral-B has no control over the quality of non-Oral-B replacement brush heads. Therefore, we cannot ensure the cleaning performance of non-Oral-

B replacement brush heads, as communicated with the electric rechargeable handle at time of initial purchase. Oral-B cannot ensure a good fit of non-Oral-B replacement brush heads. Oral-B cannot predict the long-term effect of non-Oral-B replacement brush heads on handle wear. 15 All Oral-B replacement brush heads carry the Oral-B logo and meet Oral-Bs high quality standards. Oral-B does not sell replacement brush heads or handle parts under any other brand name. Trouble Shooting Problem APP Handle does not operate

(properly) with Oral-B App. Possible reason Remedy 1. Oral-B App is closed. 2. Bluetooth is not activated on smartphone. 3. Bluetooth is deactivated on handle. 4. Bluetooth is disabled on handle. 5. Bluetooth connection to smartphone has been lost. 6. Your smartphone does not support Bluetooth 4.2 (or higher)/Bluetooth Smart. 7. Outdated Oral-B App. 1. Launch Oral-B App. 2. Activate Bluetooth on smartphone

(described in its user manual). 3. Activate Bluetooth via display Settings ->

Bluetooth activated. 4. Activate Bluetooth via display Settings ->

unlock Bluetooth first and then activate. 5. Pair handle and smartphone again via App settings. Keep your smartphone in close proximity when using it with handle. 6. Your smartphone must support Bluetooth 16 4.2 (or higher)/

Bluetooth Smart in order to pair handle. Check www.oralbappavail ability.co.uk for compatible smartphones and country availability of the Oral-B App. 7. Download latest Oral-B App. Enter via display Settings -> Factory Reset (22). Press on/off button to confirm. least for 30 min. 2. Always operate in standard operating temperatur es (> 0C and <

40C). Reset to factory settings. Original functionality wanted. TOOTHBRUSH Handle is not operating (during first use). 1. Battery has a 1. Charge at 2. Operating very low charge level;

handle does not operate. outside standard temperature

(message on display and/or alternating lights of Smart Pressure Sensor) 17 Timer has been modified/deactivate d via App. 1. Battery is at a very low charger level

(0%); it may take up to 10-15min until display turns on. 2. Ambient temperature for charging is out of valid range (< 0C and > 40C). 3. Charger may not be (properly) connected. 1. Brush head may not be placed correctly onto the brush handle. 2. Brush head may be worn. Use App to change timer settings or perform factory reset (see App Trouble Shootings). 1. Charge at least for 30min. 2. Recommended ambient temperature for charging is 5C to 35C. 3. Ensure charger is connected to mains voltage. 1. Check proper fit of brush head on handle. Small gap remains in between. 2. Replace brush head. Short stuttering sounds after 2 minutes or handle does not operate any timer. Handle does not charge. Rattling/loud noise during brushing or turning on. 18 Satisfaction Guaranteed or Your Money Back:

Try it with no risk for 60 days!

If you are not 100% satisfied, call 1-877-593-4199 to receive a full refund. Return the product in its original packaging along with the original cash receipt postmarked within 60 days of purchase to receive a pre-paid card in the amount of purchase. Terms of prepaid card apply. Your Oral-B toothbrush must be returned in its original packaging and be postmarked no later than 60 days after the date of purchase. Please allow 6-8 weeks for handling. In the U.S., the shipment return costs of the product is the responsibility of the consumer. Sorry: No refunds will be made for any Oral-B product damaged by accident, neglect, unreasonable use or lost in the post. Terms and conditions apply. For further details please contact our customer service. FOR USA ONLY Limited 2-Year Warranty Oral-B warrants this appliance to be free of defects in material and workmanship for a period of two years from the date of original purchase at retail. If the appliance exhibits such a defect, Oral-B will, at its option, repair or replace it without cost for parts and labor. The product must be carried in or shipped, prepaid and insured (recommended), to an authorized Oral-B Service Center. Proof of date of original purchase is required. The cost to ship the product to an authorized Service Center is the responsibility of the consumer, the cost to return the product to the consumer is the responsibility of Oral-B. This warranty does not cover finishes or normal wear, nor does it cover damage resulting from accident, misuse, dirt, water, tampering, unreasonable use, service performed or attempted by unauthorized service agencies, failure to provide reasonable and necessary maintenance, including recharging, or units that have been modified or used for commercial purposes. This appliance is equipped with a Bluetooth Smart approved radio module. Failure to establish a Bluetooth Smart connection to specific smart phones is not covered under the device guarantee, unless the Bluetooth radio module of this appliance is damaged. The Bluetooth devices are warranted by their own manufacturers and not by Oral-B. Oral-B does not influence or make any recommendations to device manufacturers, and therefore Oral-B does not assume any responsibility for the number of compatible devices with our Bluetooth systems. Oral-B reserves the right, without any prior notice, to make any technical modifications or changes to system implementation of device features, interface, and menu structure changes that are deemed necessary to ensure that Oral-B systems function reliably. 19 ALL IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO TWO YEARS FROM DATE OF ORIGINAL PURCHASE. IN NO EVENT WILL ORAL-B BE RESPONSIBLE FOR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may have other legal rights which vary from state to state. How to obtain service in the USA Should this product require service, please call 1-800-566-7252 to be referred to the authorized Oral-

B Service Center closest to you. To obtain service:

A. Carry the product in to the authorized Oral-B Service Center of your choice or, B. Ship the product to the authorized Oral-B Service Center of your choice. Pack the product well. Ship the product prepaid and insured (recommended). Include a copy of your proof of purchase to verify warranty coverage, if applicable. To obtain original Oral-B replacement parts and accessories:

Contact an authorized Oral-B Service Center. Please call 1-800-566-7252 to be referred to the authorized Oral-B Service Center closest to you. To order original Oral-B replacement parts and accessories (including replacement brush heads) by phone: Please call 1-800-566-7252. To speak to an Oral-B Consumer Service Representative: Please call 1-800-566-7252. Unique Identifier Oral-B iO (Handle Type 3758) Responsible Party The Procter & Gamble Co. 1 P&G Plaza Cincinnati, OH 45202 www.oralb.com This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Section 15.21 Information to user:

Internet contact information FCC Compliance Statement 20 Suppliers Declaration of Conformity 47 CFR 2.1077 Compliance Information Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Section 15.105 (b) Note: This equipment has been tested and found to comply with the Limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FOR CANADA ONLY Limited 2-Year Warranty In the event this appliance fails to function within the specified warranty period because of defects in material or workmanship, and the consumer returns the unit to an authorized service Center, Braun Canada will, at its option either repair or replace the unit without additional charge to the consumer. This warranty does not cover any product which has been damaged by dropping, tampering, servicing performed or attempted by unauthorized service agencies, misuse or abuse. This warranty excludes units which have been modified or used for commercial purposes. This appliance is equipped with a Bluetooth Smart approved radio module. Failure to establish a Bluetooth Smart connection to specific smart phones is not covered under the device guarantee, unless the Bluetooth radio module of this appliance is damaged. The Bluetooth devices are warranted by their own manufacturers and not by Oral-B. Oral-B does not influence or make any recommendations to device manufacturers, and therefore Oral-B does not assume any responsibility for the number of compatible devices with our Bluetooth systems. Oral-B reserves the right, without any prior notice, to make any technical modifications or changes to system implementation of device features, interface, and menu structure changes that are deemed necessary to ensure that Oral-B systems function reliably. To the extent allowed by law, Braun Canada shall not be responsible for loss of the product, loss of time, inconvenience, commercial loss, special or consequential damages. The provisions of this 21 warranty are in addition to and not a modification of or subtraction from the statutory warranties and other rights and remedies contained in applicable provincial legislation. How to obtain service in Canada Should this product require service, please call 1-800-566-7252 to be referred to the authorized Oral-

B Service Center closest to you. To obtain service:

A. Carry the product in to the authorized Oral-B Service Center of your choice or, B. Ship the product to the authorized Oral-B Service Center of your choice. Pack the product well. Ship the product prepaid and insured (recommended). Include a copy of your proof of purchase to verify warranty coverage, if applicable. To obtain original Oral-B replacement parts & accessories: Contact an authorized Oral-B Service Center. Please call 1-800-566-7252 to be referred to the authorized Oral-B Service Center closest to you. To speak to an Oral-B Service Representative:

Please call 1-800-566-7252. IC Compliance Notice This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. 22

PIS CONFIDENTIAL INFORMATION SOLELY FOR THE PURPOSE OF P&GsINTERNAL REVIEW OF PIS DESIGN ONLY PIS CONFIDENTIAL INFORMATION SOLELY FOR THE PURPOSE OF P&GsINTERNAL REVIEW OF PIS DESIGN ONLY

Braun GmbH Frankfurter Strae 145 61476 Kronberg im Taunus Telefon Telefax Internet www.braun.com

(0 61 73) 30-0

(0 61 73) 30-28 75 Braun GmbH Postfach 11 20 61466 Kronberg USQ3768 Request for Confidentiality Federal Communications Commission Date October, 28.th 2019 7435 Oakland Mills Road Columbia MD 21046 Subject:

FCC ID:

To Whom It May Concern:

Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days from date of grant. External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best regards Martin Msbauer Senior Scientist Braun GmbH Kronberg October 28.th, 2019 Email address: moesbauer.m@pg.com Sitz der Gesellschaft: Kronberg/Ts., Registergericht: Knigstein/Ts. HRB 8036 Geschftsfhrer: Janis Bauer, Bettina Buschhoff, Franz-Olaf Kallerhoff, Stefan Schamberg Citigroup Global Markets SWIFT CITIDEFF EUR : Kto. Nr. 211 625 023,IBAN DE18 5021 0900 0211 625023 SWIFT CITIGB2L USD : Kto. Nr. 138 61 074, IBAN GB46 CITI 1850 0813 8610 74 BF-0042WO00-07/04

BRAUA Procter & Gamble Manufacturing GmbH Frankfurter Strasse 145 61476 Kronberg rn Taunus Telephone +49 61 73 30-0 Telefax Internet

+49 61 73 30-28 75 www.braun.com Von:

Abt.:

Tel.:

E-mail:

Datum:

Martin Msbauer GPS 06173 30-2243 moesbauer.mpg.com 2019-05-02 P&G Service GmbH Postfach 1120 61446 Kronberg Federal Communications Commission Equipment Authorization branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:

I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts ofour own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 ofthe Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to:

a) b) c) d) comply with the relevant provisions of the certification program;

make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;

make claims regarding certification only in respect ofthe scope for which certification has been granted;

do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;

e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;

Sitz der Gesellschaft: Schwalbach/Ts. Registergericht: Knigstein!Ts. HRB 5465 Vorsitzender des Aufsichtsrats: Heinz-Joachim Schuitner Geschftsfhrer: Janis Bauer, Bettina Buschhoff, Gabriele Hssig, Franz-Olaf Kallerhoff, Stefan Schamberg, Astrid Teckentrup, Matthias Weber citigroup Global Markets Deutschland AG & co. KGaA, Frankfurt/Main BLZ 502 109 00, SWIFT CITIDEFF EUR: Kto. Nr. 211 625 023,IBAN DE18 5021 0900 0211 625023 BF-00042W000-01/1 5 BLZ 185 008 SWIFT CITIGB2L USD : Kto. Nr. 1386 1074, IBAN GB46 CITI 1850 0813 8610 74 BRAUA Page 2/2 f) g) h) i) j) k) use certification only to indicate the products are certified as being in conformity with specified standards;

endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;

ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;

keep a record of all complaints made known to the us relating to the products compliance with requirements of the relevant standard and to make these records available to the when requested;

take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;

document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours,

//A

LA. Martin Msbauer Global Product Stewardship Procter & Gamble, Kronberg 201 9-03-07 REMARK:

BF-00042W000-04/09 I . 2. 3. This authorization letter will be sent along with your application when filing with UL Verification Services Inc. Please follow the format and type it on company letterhead and send original to us. Authorized signature must be in agreement with grantee code contact in FCC database and Industry Canada contact information.