Users manual SP-02 Bluetooth Stereo Speaker Model no Music Time Standby Time Charge Time SPECIFICATIONS SP-02 Ver. 6 Hours Up to 250 Hours 4~5Hours Talk Time Iuput Dimensions Bluetooth Profiles HSP,HFP,A2DP,AVRCP Effective Range Bluetooth V.3.0+EDR 10Meters 9Hours DC : 5V/500ma 142*35*63mm 1 About SP-02 SP-02 is a stereo speaker with Bluetooth technology. It supports the following Bluetooth profiles:
HSP Speaker Profile HFP Hands-free Profile A2DP Advanced Audio Distribution Profile AVRCPAudio/Video Remote Control Profile Overview 1 3 5 7 NEXT MFB Preview USB Charge port 2 4 6 8 Volume UP Volume Down Line in Power Switch Charging the battery with USB cable Step1: Insert USB charging cable into any USB port have more than 500ma
(PC/NB/power bank/adapter) Step2: Connect charging cable with the charging port of SP-02. When the red light is on, the SP-02 is charging. 2 When the blue light is on, the SP-02 battery is charged fully. It takes about 4~5 hours to full charge the battery. Warning:
The battery is rechargeable. First time charging : Before use SP-02, please charge the battery fully How to use A Switching on / off Speaker When turn on power switch, the SP-02 will into the standby mode. Wait the device connect with SP-02. When turn off power switch, the SP-02 will into power off status. B Pairing the SP-02 with Bluetooth devices A) How to enter pairing mode Be sure SP-02 in power on and Standby status first. Press and hold the MFB for 3 seconds, till Red and blue Led blink alternately, or you hear the indication Do Do twice come out. And then release the MFB. The unit will become pairing mode. B) Pairing the speaker with Bluetooth mobile phone Please make sure your mobile phone has Bluetooth function that can be used. Specific pairing procedures were not the same with different mobile phone. Please refer to your mobile phone manual for further information. Steps as follows:
a) Please keep the SP-02 and mobile phone in the range of 1 meter when pairing. b) Start the Bluetooth function of mobile phone and search the Bluetooth devices. c) Wait the SP-02 enter into pairing mode (Please refer to how to enter into pairing mode). After got the SP-02 is on the list, select SP-02in the Bluetooth device list. 3 a) Almost all mobile no need enter pass word but some version Bluetooth maybe need it, if need it the password is0000, and press the key of Yes or confirmed. b) After successful pairing, select SP-02 in the Bluetooth device list, and press connect. c) After successful connecting, the blue LED of the SP-02 will quickly blinks twice or three times every 4 seconds. Making calls with the speaker Function Status of SP-02 Operation Redial last number Standby mode Short press MFB twice quickly Volume up Conversation mode Conversation mode Volume down Answer calling Ringing Short press MFB Short press or hold + key. When the volume is adjusted to max, you will hear an indication tone. Short press or hold key. When the volume is adjusted to min, you will hear an indication tone. Reject calling Ringing Short press MFB twice quickly Notes:
For some mobile phones, when you press the key of accepting on the phone, the conversation will be sent to the mobile phone. At this time, you can switch the call to speaker by using the conversation switch button or through operating on the mobile phone. Please refer to the instruction of your mobile phone for further information Playing music When the SP-02 connects with the mobile phone or other Bluetooth which supports A2DP, you can enjoy music through SP-02 wirelessly. 4 Function Status of speaker Operation Pause Play Last song Next song Playing music Short press MFB Standby Short press MFB Playing music Press preview key Playing music press next key press + key. Volume up Playing music Volume down Playing music When the volume is adjusted to max, you will hear an indication tone. Short press key. When the volume is adjusted to min, you will hear an indication tone. Notes: . When you use SP-02 remote control the function of last song/next song/pause, it needs your mobile phone or Bluetooth transmitter supports AVRCP. Please refer to the instruction of your mobile phone or Bluetooth transmitter. for further information. LED indicator A) Charging LED indicator Red LED is on Blue LED is on Status of the SP-02 Charging Finish charging 5 B) In use. LED Indicator Status of the speaker Red and blue LEDs blink alternately Pairing mode Blue LED quickly blinks once every 2 seconds. Not connected to a device Blue LED gradually turns on and off Conversation mode Red LED blinks twice every 20 seconds Low power G Re-connecting to a Bluetooth device A) Automatic connecting Every time the SP-02 is switched on, it will connect to the last connected device, and connected automatically. B) Manual connecting to last connected device When the speaker is in standby mode and doesnt connect to any devices, short press MFB button once, it will connect to last connected device automatically. 6 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 7