FCC ID: 2A583-RW0002 RFID Multifunction System

RFID Multifunction System Operation Manual Ver 1.0 Version BR-RW-0002 Manufacturer and publisher Brillian Network & Automation Integrated System Co.,Ltd Add: No.41, Keyi St., Zhunan Township, Miaoli County 350, Taiwan, R.O.C. Tel: 886-37-580708 Fax: 886-37-580728 Emailservices@brillian.com.tw Websitehttp://www.brillian.com.tw The reproduction of any part of this user manual, in any from (by photocopying, microfilming or any other process) or the processing and distribution of the contents by electronic means is prohibited without the expressed written consent of Brillian. It is prohibited to copy the software or use it for other purposes. it is expressly prohibited to distribute copies of the software to third parties. Violators will be held liable for damage. Brillian Network & Automation Integrated System Co., Ltd. Contents 1 Brief introduction of equipment ................................................................................................ - 1 -

2 Description of safety rule of BR-RW-0002 ................................................................................ - 2 -

3 Description of starting steps ..................................................................................................... - 3 -

4 Description of stopping steps .................................................................................................... - 3 -

Facility Requirement&SPEC .................................................................................................... - 3 -

5 6 FCC Rules .............................................................................................................................. - 3 -

7 BR-RW-0002 .......................................................................................................................... - 5 -

8 BR-RW-0002 Hardware ........................................................................................................... - 6 -

9 Operation Description .............................................................................................................. - 6 -

10 Periodical Maintenance ............................................................................................................ - 7 -

I Brillian Network & Automation Integrated System Co., Ltd. 1 Brief introduction of equipment Brillian Material Handling Solution(BMHS) We provide a FAB semi-automatic material handling solution. Through a material storage devices, integrating the BMHS system and database, product locations and determine the transmission route, optimal throughput and increase productivity. eRack management collects all eRack status information, exchanges information on behalf of all eRacks and MES. Provides admin search queries, work order inquiries, statistical analysis, etc. The eRack shelf can read the RFID tag on the foup by RFID antenna, transfer the carrierID data to the background for unified management, and then receive the foup information from the background to the operator. Feature of Product The BMHS system centrally monitoring shelfs of E-Rack. Integrate MES and BMHS real time management systems to control all products in the factory. Significantly improve productivity. Flexible systems configuration and higher utilization rate. Provide various statistical data to facilitate analysis and decision-making. RFID Reader helps to confirm whether the products and sites are correct before assisting production, which greatly reduce errors.

- 1 -

Brillian Network & Automation Integrated System Co., Ltd. 2 Description of safety rule of BR-RW-0002 2.1 Instruction for use 2.1.1 This manual is only written for Purge System Module 2.1.2 Non-qualified or non-professional personnel are not allowed to operate or maintain the machine 2.1.3 Operator should read carefully the software operation in advance 2.1.4 Maintainer, in addition to getting familiar with software operation, should read carefully the maintenance manual and circuit diagram 2.1.5 Before careful reading of operation manual or before thorough understanding of machine function, it is not allowed to operate the machine singly, and it needs an experienced guy standing beside for instruction 2.2 Instruction for transport When transporting or moving a machine, it is suggested to use a cart for the transport, please also wear steel shoes for personal safety. The cart should be able to carry a load of more than 100Kg 2.3 For scarping of equipment or disposal of waste, please follow the local regulations 2.4 Instruction for illuminance in the work area: Please follow the lighting environment provided by the plant of the client send. 2.5 The machine is not suitable to work in explosive circumstances 2.6 Before ex-factory, the level of noise should be less than 80dB (A). 2.7 About Warnings and Cautions 1. When power is supplied, non-professional personnel should not operate it to avoid electric shock hazard. 2. Before checking, maintenance and repair, please turn off the power.

- 2 -

Brillian Network & Automation Integrated System Co., Ltd. 3 Description of starting steps 3.1 Adapter to be AC 100~230V 4 Description of stopping steps 4.1 Please remove Adapter 5 Facility Requirement&SPEC Product Name Model Type Rating(Adapter) RFID Multifunction System BR-RW-0002 I/P: 100~240VAC, 50/60Hz, 0.4A O/PDC15V,1A Length X Width X Height(mm) 350 X 66 X 345 Weight Frequency kg 134.2KHz 6 FCC Rules This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

- 3 -

Brillian Network & Automation Integrated System Co., Ltd. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

- 4 -

Brillian Network & Automation Integrated System Co., Ltd. 7 BR-RW-0002 Module Illustration Front-1

- 5 -

Brillian Network & Automation Integrated System Co., Ltd. 8 BR-RW-0002 Hardware 8.1 Hardware Method Operation Description 9 Put a POD fixed on the goods which you need to get goods information. The Transponder has a data record for the good During the Host computer sent a order message to the CIDRW through RS232 or HSMS The CIDRW will sent back the goods information which read from the Transponder by radio frequency.

- 6 -

Brillian Network & Automation Integrated System Co., Ltd. RFIDAI2300AdapterAC100~240VTo DC15V1AI/OLEDButtonRFIDANTLCDBarcodeRS232&DC5V 10 Periodical Maintenance 10.1 Cleaning Plate 10.1.1 PurposeCleaning Plate Particle MaterialNA Manual toolCleanroom wiperDI Water NoticeBefore action, please confirm whether the machine is down PM StepCleanroom wiper cloth into the DI Water from inside to outside and from top to clean the Plate surface.

- 7 -

Brillian Network & Automation Integrated System Co., Ltd. ItemMaintenance ContentCycleResultRemark1Clean PlateThree monthsOK NG2Reader TestThree monthsPut the POD on Plate use button Check Reader FunctionOK NGRemarkPlate CleanUse DI Water &Cleanroom wiper Clean PlateActionBR-RW0002 Maintenance TableMachine Tool Three monthsDateOperator

Brillian Network&Automation Model NoBR-RW-0002 InputAC100-240V 50/60 Hz FCC ID2A583-RW0002 www.brillain.com.tw 36mm Made in Taiwan 50mm

se FL Be it a BR i]

n Network & Automation Integrated System Co. Ltd. Authority to Act as Agent Date: 2022/8/16 Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands To Whom It May Concern:

Intertek Testing Services Taiwan Ltd (Rico Deng) is authorized to act on our behalf, until otherwise notified, for applications to Bureau Veritas Consumer Product Services, Inc. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, By: LU MIN cHE LI MIN CHE

(Signature) (Print name) engineer On behalf of: _ Brillian Network & Automation

(Company Name) Telephone: 037580708#1216 Vid fon

rk & Automation Integrated System Co, Ltd.

(2022/08/16) To:

Federal Communications Commi ion Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: 2A583-RW0002 Pursuant to sections 0.457 and 0.459 of CFR 47, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application as:

Block Diagram Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client's signature: | 1 MIM CHE Client's name & title: Engineer Contact information / address: No.41, Keyi St., Zhunan Township, Miaoli County 35059, Taiwan (R.O.C.) TEL : 037580708