FCC ID: QDS-BRCM1076 Broadcom 802.11a/b/g/n/ac WLAN + Bluetooth PCIE Mini Card

by: Broadcom Corporation latest update: 2016-01-21 model: BRCM1076

Thirty Nine grants have been issued under this FCC ID from 07/25/2013 to 01/21/2016 (this is one of forty-one releases in 2016 for this grantee). Public details available include internal & external photos, manuals, and frequency information. some products also feature user submitted or linked warrantee terms, instructions, troubleshooting guides, password defaults, & drivers.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various Manual 1 Users Manual pdf 4.11 MiB
various Manual 2 Users Manual pdf 338.45 KiB
various Manual 3 Users Manual pdf 3.04 MiB
various Regulatory Notice Users Manual pdf 95.84 KiB
various User Manual Users Manual pdf 5.05 MiB
various User Manual1 Users Manual pdf 155.34 KiB
various User Manual2 Users Manual pdf 856.70 KiB
various User Manual3 Users Manual pdf 540.45 KiB
various Internal Photo Internal Photos pdf 1.45 MiB December 06 2015
various Internal Photos Internal Photos pdf 899.26 KiB
various Photos Internal Internal Photos pdf 827.91 KiB
various External Photo External Photos pdf 4.27 MiB December 06 2015
various External Photos External Photos pdf 765.87 KiB
various Photos External External Photos pdf 767.86 KiB
various Host Label ID Label/Location Info pdf 66.90 KiB
various Host Location ID Label/Location Info pdf 162.58 KiB
various ID Label ID Label/Location Info pdf 352.72 KiB
various Label ID Label/Location Info pdf 43.72 KiB / January 09 2015
various Label & Location ID Label/Location Info pdf 1.17 MiB
various Label Location ID Label/Location Info pdf 1.57 MiB / January 09 2015
various Module Label and location ID Label/Location Info pdf 70.16 KiB
various Test Report pdf
various Test Setup Photos pdf
various BCM94352Z FCC C2PC (to new FCC UNII rule) updated Cover Letter(s) pdf 25.04 KiB
various BCM94352Z FCC C2PC confidentiality request Jan 2016 Cover Letter(s) pdf 246.34 KiB
various FCC Agent Authorization Letter (UL) Sept 2015 Cover Letter(s) pdf 537.37 KiB
various FCC Class II Change Letter BCM94352Z Cover Letter(s) pdf 34.71 KiB / January 09 2015
various FCC confidentiality request letter BCM94352Z Cover Letter(s) pdf 58.09 KiB / January 09 2015
various RF Exposure Info pdf / January 09 2015
various LOA BCM94352Z FCC, IC C2PC Cover Letter(s) pdf 24.21 KiB / January 09 2015
various LOA Lenovo for BCM94352Z, BCM943162ZP Cover Letter(s) pdf 198.21 KiB / January 09 2015
various RF Exposure Info pdf / January 09 2015
various RF Exposure Info pdf / January 09 2015
various Test Setup Photos pdf
various C2PC Letter Cover Letter(s) pdf 94.27 KiB
various Confidentiality Letter Rev Cover Letter(s) pdf 79.05 KiB December 06 2015
various Label Justification Letter Cover Letter(s) pdf 112.21 KiB
various Power of Attorney Letter Cover Letter(s) pdf 105.79 KiB
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Test Setup Photos pdf
various Agent Authorization Letter Cover Letter(s) pdf 394.26 KiB
various Confidentiality Letter Cover Letter(s) pdf 270.89 KiB
various RF Exposure Info pdf
various Test Setup Photos pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Test Report pdf
various Test Setup Photos pdf
various Test Report pdf
various Test Setup Photos pdf
various Test Report pdf
various Test Setup Photos pdf
various Test Report pdf
various Test Setup Photos pdf
various Test Report pdf
various Test Setup Photos pdf
various Agent Letter Cover Letter(s) pdf 583.60 KiB
various Test Setup Photos pdf
various Test Setup Photos pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Test Report pdf
various Test Setup Photos pdf
various Test Setup Photos pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Test Report pdf
various Test Setup Photos pdf
various Test Setup Photos pdf
various Test Setup Photos pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various C2PC Cover Letter(s) pdf 28.94 KiB
various LOA Cover Letter(s) pdf 21.69 KiB
various LOA Lenovo Cover Letter(s) pdf 49.31 KiB
various RSE justification Cover Letter(s) pdf 51.83 KiB
various RF Exposure Info pdf
various RF Exposure Info pdf
various Test Setup Photos pdf
various conf. request Cover Letter(s) pdf 259.88 KiB
various Authorization Letter Cover Letter(s) pdf 112.86 KiB
various C2PC Cover Letter Cover Letter(s) pdf 93.82 KiB
various Confidentiality Cover Letter(s) pdf 39.91 KiB
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Manual 1 Users Manual pdf 4.11 MiB
various Manual 2 Users Manual pdf 338.45 KiB
various Manual 3 Users Manual pdf 3.04 MiB
various Regulatory Notice Users Manual pdf 95.84 KiB
various User Manual Users Manual pdf 5.05 MiB
various User Manual1 Users Manual pdf 155.34 KiB
various User Manual2 Users Manual pdf 856.70 KiB
various User Manual3 Users Manual pdf 540.45 KiB
various Internal Photo Internal Photos pdf 1.45 MiB December 06 2015
various Internal Photos Internal Photos pdf 899.26 KiB
various Photos Internal Internal Photos pdf 827.91 KiB
various External Photo External Photos pdf 4.27 MiB December 06 2015
various External Photos External Photos pdf 765.87 KiB
various Photos External External Photos pdf 767.86 KiB
various Host Label ID Label/Location Info pdf 66.90 KiB
various Host Location ID Label/Location Info pdf 162.58 KiB
various ID Label ID Label/Location Info pdf 352.72 KiB
various Label ID Label/Location Info pdf 43.72 KiB / January 09 2015
various Label & Location ID Label/Location Info pdf 1.17 MiB
various Label Location ID Label/Location Info pdf 1.57 MiB / January 09 2015
various Module Label and location ID Label/Location Info pdf 70.16 KiB
various BCM94352Z FCC C2PC (to new FCC UNII rule) updated Cover Letter(s) pdf 25.04 KiB
various BCM94352Z FCC C2PC confidentiality request Jan 2016 Cover Letter(s) pdf 246.34 KiB
various FCC Agent Authorization Letter (UL) Sept 2015 Cover Letter(s) pdf 537.37 KiB
various FCC Class II Change Letter BCM94352Z Cover Letter(s) pdf 34.71 KiB / January 09 2015
various FCC confidentiality request letter BCM94352Z Cover Letter(s) pdf 58.09 KiB / January 09 2015
various LOA BCM94352Z FCC, IC C2PC Cover Letter(s) pdf 24.21 KiB / January 09 2015
various LOA Lenovo for BCM94352Z, BCM943162ZP Cover Letter(s) pdf 198.21 KiB / January 09 2015
various C2PC Letter Cover Letter(s) pdf 94.27 KiB
various Confidentiality Letter Rev Cover Letter(s) pdf 79.05 KiB December 06 2015
various Label Justification Letter Cover Letter(s) pdf 112.21 KiB
various Power of Attorney Letter Cover Letter(s) pdf 105.79 KiB
various Agent Authorization Letter Cover Letter(s) pdf 394.26 KiB
various Confidentiality Letter Cover Letter(s) pdf 270.89 KiB
various Agent Letter Cover Letter(s) pdf 583.60 KiB
various C2PC Cover Letter(s) pdf 28.94 KiB
various LOA Cover Letter(s) pdf 21.69 KiB
various LOA Lenovo Cover Letter(s) pdf 49.31 KiB
various RSE justification Cover Letter(s) pdf 51.83 KiB
various conf. request Cover Letter(s) pdf 259.88 KiB
various Authorization Letter Cover Letter(s) pdf 112.86 KiB
various C2PC Cover Letter Cover Letter(s) pdf 93.82 KiB
various Confidentiality Cover Letter(s) pdf 39.91 KiB

frequency equipment class purpose
1 2016-01-21 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
2 2015-09-01 5745 ~ 5825 DTS - Digital Transmission System
3 5510 ~ 5710 NII - Unlicensed National Information Infrastructure TX
4 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
5 2015-06-15 5510 ~ 5710 NII - Unlicensed National Information Infrastructure TX
6 5745 ~ 5825 DTS - Digital Transmission System
7 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
8 2015-03-25 5510 ~ 5710 NII - Unlicensed National Information Infrastructure TX
9 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
10 5745 ~ 5825 DTS - Digital Transmission System
11 2015-03-21 5510 ~ 5710 NII - Unlicensed National Information Infrastructure TX
12 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
13 5745 ~ 5825 DTS - Digital Transmission System
14 2015-01-29 5510 ~ 5710 NII - Unlicensed National Information Infrastructure TX
15 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
16 5745 ~ 5825 DTS - Digital Transmission System
17 2014-12-18 5745 ~ 5825 DTS - Digital Transmission System
18 5510 ~ 5710 NII - Unlicensed National Information Infrastructure TX
19 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
20 2014-12-04 5745 ~ 5825 DTS - Digital Transmission System
21 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
22 5510 ~ 5710 NII - Unlicensed National Information Infrastructure TX
23 2014-08-14 5510 ~ 5710 NII - Unlicensed National Information Infrastructure TX
24 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
25 5745 ~ 5825 DTS - Digital Transmission System
26 2014-06-30 5745 ~ 5825 DTS - Digital Transmission System
27 2014-06-27 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
28 5745 ~ 5825 DTS - Digital Transmission System
29 5510 ~ 5710 NII - Unlicensed National Information Infrastructure TX
30 2014-06-18 5745 ~ 5825 DTS - Digital Transmission System
31 5510 ~ 5710 NII - Unlicensed National Information Infrastructure TX
32 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
33 2013-11-18 5510 ~ 5710 NII - Unlicensed National Information Infrastructure TX
34 5745 ~ 5825 DTS - Digital Transmission System
35 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
36 2013-07-31 JBP - Part 15 Class B Computing Device Peripheral Original Equipment
37 2013-07-25 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
38 5745 ~ 5825 DTS - Digital Transmission System
39 5510 ~ 5710 NII - Unlicensed National Information Infrastructure TX

Application Forms

app s Applicant Information
various Effective 2016-01-21
various 2015-09-01
various 2015-06-15
various 2015-03-25
various 2015-03-21
various 2015-01-29
various 2014-12-18
various 2014-12-04
various 2014-08-14
various 2014-06-30
various 2014-06-27
various 2014-06-18
various 2013-11-18
various 2013-07-31
various 2013-07-25
various Applicant's complete, legal business name Broadcom Corporation
various FCC Registration Number (FRN) 0007091952
various Physical Address 270 Innovation Drive
various San Jose, 95134
various United States
app s TCB Information
various TCB Application Email Address L******@ul.com
various L******@ul.com
various a******@babt.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code QDS
various Equipment Product Code BRCM1076
app s Person at the applicant's address to receive grant or for contact
various Name A**** L********
various Title Manager, Compliance Engineering
various Telephone Number 40892********
various Fax Number 408-5********
various E-mail a******@broadcom.com
app s Technical Contact
various Firm Name Compliance Certification Services Inc.
various Name D**** C****
various Physical Address No.11, Wugong 6th Rd., Wugu Dist.
various New Taipei city, 24891
various Taiwan
various Telephone Number 886-2********
various Fax Number 886-2********
various E-mail a******@ccsrf.com
app s Non Technical Contact
various Firm Name Compliance Certification Services Inc.
various Name D******** C******
various Physical Address No.11, Wugong 6th Rd., Wugu Dist.
various New Taipei City, 24891
various Taiwan
various Telephone Number 886-2********
various Fax Number 886-2********
various E-mail a******@ccsrf.com
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
variousYes
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)02/14/2016
various11/14/2015
various09/21/2015
various09/18/2015
various10/23/2015
various07/28/2015
various06/16/2015
various12/12/2014
various01/31/2015
various12/26/2014
various08/21/2014
various11/17/2014
various01/21/2014
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassNII - Unlicensed National Information Infrastructure TX
variousDTS - Digital Transmission System
variousDSS - Part 15 Spread Spectrum Transmitter
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Broadcom 802.11a/b/g/n/ac WLAN + Bluetooth PCIE Mini Card
various802.11a/b/g/n/ac WLAN + Bluetooth PCI-E Mini Card
various802.11 a/b/g/n/ac WLAN+ Bluetooth PCI-E Mini Card
various802.11a/b/g/n WLAN + Bluetooth PCI-E Mini Card
various802.11 a/b/g/n WLAN+Bluetooth PCI-E Mini Card
various802.11a/b/g/n/ac WLAN + Bluetooth PCI-E NGFF 2230 Mini Card
various802.11a/b/g/n WLAN + Bluetooth PCI-E Mini Card
variousBroadcom 802.11a/b/g/n/ac WLAN + Bluetooth PCI-E Mini Card
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousModular Equipment TypeSingle Modular Approval
variousDoes not apply
variousPurpose / Application is forClass II permissive change or modification of presently authorized equipment
variousOriginal Equipment
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsClass II permissive change to show compliance with new UNII rules. Power output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in all bands. For mobile configuration, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. For portable configuration, the approval is valid to allow installation with a minimum 10mm antenna-to-enclosure separation distance in tablets and 5mm antenna to user separation distance in the keyboard section of notebook/laptop PCs with the antennas documented in this filing. Use of other antennas is subject to FCC Permissive Change procedures which may require additional filing for a C2PC. The highest reported SAR is 0.36 W/kg. OEM integrators must be provided with antenna installation instructions. OEM integrators and end users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the Portable Computer (Lenovo ideapad Y700-15ACZ, Lenovo ideapad Y700-15ISK, Lenovo ideapad Y700 Touch-15ISK) at reduced powers described in this filing. The highest reported SAR values for body exposure conditions are 0.34 W/kg. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.51 W/Kg and 1.58 W/Kg respectively. Power output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. 802.11 operations in the 2.4 GHz band support only 20 MHz bandwidths. It must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the Portable Computer (Lenovo ideapad Y700-15ACZ, Lenovo ideapad Y700-15ISK, Lenovo ideapad Y700 Touch-15ISK) at reduced powers described in this filing. The highest reported SAR values for body exposure conditions is 0.38 W/kg. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.39 W/Kg and 1.53 W/Kg respectively. Power output listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in all bands. It must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the Portable Computer (Lenovo ideapad Y700-15ACZ, Lenovo ideapad Y700-15ISK, Lenovo ideapad Y700 Touch-15ISK) with reduced power as described in this filing. Output power is conducted. It must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the Portable Computer (Dell Model: P20T) at reduced powers described in this filing. The highest reported SAR values for body and simultaneous exposure conditions are 1.19 W/kg and 1.47 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.39 W/Kg and 1.53 W/Kg respectively. Power output listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in all bands. It must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the Portable Computer(Dell Model: P20T) at reduced powers described in this filing. The highest reported SAR values for body and simultaneous exposure conditions are 1.17 W/kg and 1.24 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.51 W/Kg and 1.58 W/Kg respectively. Power output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. 802.11 operations in the 2.4 GHz band support only 20 MHz bandwidths. It must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the Portable Computer(Dell Model: P20T) with reduced power as described in this filing. Output power is conducted. It must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo Flex 3-1570, Flex 3-1535) at reduced powers described in this filing. The highest reported SAR values for body and simultaneous exposure conditions are 1.33 W/kg and 1.33 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.39 W/Kg and 1.53 W/Kg respectively. Power output listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in all bands. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo Flex 3-1570, Flex 3-1535) at reduced powers described in this filing. Output power is conducted. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo Flex 3-1570, Flex 3-1535) at reduced powers described in this filing. The highest reported SAR values for body and simultaneous exposure conditions are 1.37 W/kg and 1.37 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.51 W/Kg and 1.58 W/Kg respectively. Power output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. 802.11 operations in the 2.4 GHz band support only 20 MHz bandwidths. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo Flex 3-1470, Flex 3-1435, Flex 3-1475) with reduced power as described in this filing. The highest reported SAR value for this filing is 1.20 W/kg. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.39 W/Kg and 1.53 W/Kg respectively. Power output listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in all bands. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo Flex 3-1470, Flex 3-1435, Flex 3-1475) with reduced power as described in this filing. Output power is conducted. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo Flex 3-1470, Flex 3-1435, Flex 3-1475) with reduced power as described in this filing. The highest reported SAR value for this filing is 1.06 W/kg. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.51 W/Kg and 1.58 W/Kg respectively. Power output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. 802.11 operations in the 2.4 GHz band support only 20 MHz bandwidths. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo Yoga 3 14 Haydn) that described in this filing. The highest reported SAR values is 1.02 W/Kg. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.39 W/Kg and 1.53 W/Kg respectively. Power output listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in all bands. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo Yoga 3 14 Haydn) that described in this filing. Output power is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo Yoga 3 14 Haydn) that described in this filing. The highest reported SAR values is 1.51 W/Kg. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.51 W/Kg and 1.58 W/Kg respectively. Power output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. 802.11 operations in the 2.4 GHz band support only 20 MHz bandwidths. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow installation into portable hosts Lenovo Edge 15 and Flex 2 Pro-15 with power reduction for 802.11 operating modes and using the antennas as described in this filing. The highest reported SAR in this filing is 1.27 W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.39 W/kg. Power output listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in all bands. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow installation into portable hosts Lenovo Edge 15 and Flex 2 Pro-15 with power reduction for 802.11 operating modes and using the antennas as described in this filing. The highest reported SAR in this filing is 1.29 W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.39 W/kg. Power output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow installation into portable hosts Lenovo Edge 15 and Flex 2 Pro-15 with the antennas as described in this filing. Output power is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II permissive change to allow use in portable host Lenovo Yoga 3 11 with the antennas documented in this filing. Output power of module is reduced for this host due to the SAR and emission requirement. The highest reported SAR values for body and simultaneous transmission exposure conditions are 1.12 W/Kg and the highest reported SAR value across all filings under this FCC ID is 1.39 W/kg. Power output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. 802.11 operations in the 2.4 GHz band support only 20 MHz bandwidths. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II permissive change to allow use in portable host Lenovo Yoga 3 11 with the antennas documented in this filing. Output power of module is reduced for this host due to the SAR and emission requirement. Output power is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II permissive change to allow use in portable host Lenovo Yoga 3 11 with the antennas documented in this filing. Output power of module is reduced for this host due to the SAR and emission requirement. The highest reported SAR values for body exposure condition is 1.09 W/Kg and the highest reported SAR value across all filings under this FCC ID is 1.39 W/kg. Power output listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in all bands. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II permissive change to allow use in portable host Lenovo YOGA 3 Pro-1370 with the antennas documented in this filing. Output power of module is reduced for this host due to the SAR and emission requirement. The highest reported SAR values for body and simultaneous transmission exposure conditions are 1.39 W/Kg and 1.53 W/Kg respectively. Power output listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in all bands. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II permissive change to allow use in portable host Lenovo YOGA 3 Pro-1370 with the antennas documented in this filing. Output power of module is reduced for this host due to the SAR and emission requirement. Output power is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II permissive change to allow use in portable host Lenovo YOGA 3 Pro-1370 with the antennas documented in this filing. Output power of module is reduced for this host due to the SAR and emission requirement. The highest reported SAR values for body and simultaneous transmission exposure conditions are 1.28 W/Kg and 1.41 W/Kg respectively. Power output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. 802.11 operations in the 2.4 GHz band support only 20 MHz bandwidths. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II permissive change to add 802.11n HT40 modes to the 2.4GHz band that documented in this filing. Power output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. 802.11 operations in the 2.4 GHz band support only 20 MHz bandwidths. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II permissive change to allow use in portable host Lenovo Yoga 2 Pro with the antennas documented in this filing. Output power of module is reduced for this host due to the SAR and emission requirement. Output power is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II permissive change to allow use in portable host Lenovo Yoga 2 Pro with the antennas documented in this filing. Output power of module is reduced for this host due to the SAR and emission requirement. The highest reported SAR values for body and simultaneous transmission exposure conditions are 1.14 W/Kg and 1.58 W/Kg respectively. Power output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. 802.11 operations in the 2.4 GHz band support only 20 MHz bandwidths. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II permissive change to allow use in portable host Lenovo Yoga 2 Pro with the antennas documented in this filing. Output power of module is reduced for this host due to the SAR and emission requirement. The highest reported SAR values for body and simultaneous transmission exposure conditions are 1.14 W/Kg and 1.58 W/Kg respectively. Power output listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in all bands. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousPower output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. 802.11 operations in the 2.4 GHz band support only 20 MHz bandwidths. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. C2PC. This device and associated FCC ID label are to be installed in the specific portable platform Lenvov Regulatory with model number: Lenovo Yoga 2 13 shown in this filing only by OEM or OEM integrators user installation is prohibited. Instructions on the installation and/or removal of this module may not be provided to the end user. Only the antenna(s) documented in this filing, installed in the manner specified, can be used with this device. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR value for body-worn is 1.15 W/kg.
variousPower output listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in all bands. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. C2PC. This device and associated FCC ID label are to be installed in the specific portable platform Lenvov Regulatory with model number: Lenovo Yoga 2 13 shown in this filing only by OEM or OEM integrators user installation is prohibited. Instructions on the installation and/or removal of this module may not be provided to the end user. Only the antenna(s) documented in this filing, installed in the manner specified, can be used with this device. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR value for body-worn is 1.16 W/kg.
variousOutput power is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. C2PC. This device and associated FCC ID label are to be installed in the specific portable platform Lenvov Regulatory with model number: Lenovo Yoga 2 13 shown in this filing only by OEM or OEM integrators user installation is prohibited. Instructions on the installation and/or removal of this module may not be provided to the end user. Only the antenna(s) documented in this filing, installed in the manner specified, can be used with this device. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements.
variousClass II permissive change filing to allow installation with a minimum 10mm antenna-to-enclosure separation distance in tablets and 5mm antenna to user separation distance in the keyboard section of notebook/laptop PCs with the antennas documented in this filing. Use of other antennas is subject to FCC Permissive Change procedures which may require additional filing for a C2PC. The highest reported SAR is 0.36 W/kg. Power output listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in all bands. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II permissive change filing to allow installation with a minimum 10mm antenna-to-enclosure separation distance in tablets and 5mm antenna to user separation distance in the keyboard section of notebook/laptop PCs with the antennas documented in this filing. Use of other antennas is subject to FCC Permissive Change procedures which may require additional filing for a C2PC. The highest reported SAR is 0.58 W/kg. Power output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. 802.11 operations in the 2.4 GHz band support only 20 MHz bandwidths. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II permissive change filing to allow installation with a minimum 10mm antenna-to-enclosure separation distance in tablets and 5mm antenna to user separation distance in the keyboard section of notebook/laptop PCs with the antennas documented in this filing. Use of other antennas is subject to FCC Permissive Change procedures which may require additional filing for a C2PC. Output power is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousOutput power is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousPower output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. 802.11 operations in the 2.4 GHz band support only 20 MHz bandwidths. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousPower output listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in all bands. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name UL Verification Services Inc. (formerly UL CCS)
various Compliance Certification Services (KunShan) Inc.
various Sporton International Inc.
various Compliance Certification Services Inc.
various Cerpass Technology (SuZhou) Co., Ltd.
various Compliance Certification Services
various Name M****** M******
various K**** C******
various A******** C****
various H**** L********
various M****** C****
various W******** C****
various T******** C****
various Telephone Number 919 5********
various 88633******** Extension:
various 886-3******** Extension:
various 886-2******** Extension:
various 86-05******** Extension:
various 886-3******** Extension:
various 510-7********
various 886-3******** Extension:
various Fax Number 000-0********
various 88633********
various 886-3********
various 886-2********
various 86-05********
various 886-3********
various 510-6********
various 886-3********
various E-mail m******@ul.com
various k******@tw.ccsemc.com
various a******@sporton.com.tw
various h******@sgs.com
various m******@cerpass.net
various w******@ccsrf.com
various t******@ccsemc.com
various k******@ccsrf.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E 38 CC MO 5180 5240 0.049
1 2 15E 38 CC MO ND 5260 5320 0.218
1 3 15E 38 CC MO ND 5500 5720 0.206
1 4 15E 38 CC MO ND 5510 5710 0.217
1 5 15E 38 CC MO 5745 5825 0.197
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC MO 2402 2480 0.001
2 2 15C CC MO 2412 2462 0.172
2 3 15C CC MO 5745 5825 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15E CC MO 5180 5240 0.049
3 2 15E CC MO 5260 5320 0.218
3 3 15E CC MO 5500 5720 0.206
3 4 15E CC MO 5510 5710 0.217
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15E CC MO 5180 5240 0.049
5 2 15E CC MO 5260 5320 0.218
5 3 15E CC MO 5500 5720 0.206
5 4 15E CC MO 5510 5710 0.217
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402 2480 0.001
6 2 15C CC MO 2412 2462 0.172
6 3 15C CC MO 5745 5825 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15E CC MO 5180 5240 0.049
8 2 15E CC MO 5260 5320 0.218
8 3 15E CC MO 5500 5720 0.206
8 4 15E CC MO 5510 5710 0.217
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15C CC MO 2402 2480 0.001
10 2 15C CC MO 2412 2462 0.172
10 3 15C CC MO 5745 5825 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15E CC MO 5180 5240 0.049
11 2 15E CC MO 5260 5320 0.218
11 3 15E CC MO 5500 5720 0.206
11 4 15E CC MO 5510 5710 0.217
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15C CC 2402 2480 0.001
13 2 15C CC MO 2412 2462 0.172
13 3 15C CC MO 5745 5825 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15E CC MO 5180 5240 0.049
14 2 15E CC MO ND 5260 5320 0.218
14 3 15E CC MO ND 5500 5720 0.206
14 4 15E CC MO ND 5510 5710 0.217
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15C CC MO 2412 2462 0.172
16 2 15C CC MO 5745 5825 0.214
16 3 15C CC 2402 2480 0.001
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15C CC 2402 2480 0.001
17 2 15C CC MO 2412 2462 0.172
17 3 15C CC MO 5745 5825 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15E CC MO 5180 5240 0.049
18 2 15E CC MO ND 5260 5320 0.218
18 3 15E CC MO ND 5500 5720 0.206
18 4 15E CC MO ND 5510 5710 0.217
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 15C CC MO 2412 2462 0.172
20 2 15C CC MO 5745 5825 0.214
20 3 15C CC 2402 2480 0.001
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
21 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
22 1 15E CC MO 5180 5240 0.049
22 2 15E CC MO ND 5260 5320 0.218
22 3 15E CC MO ND 5500 5720 0.206
22 4 15E CC MO ND 5510 5710 0.217
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
23 1 15E CC MO 5180 5240 0.049
23 2 15E CC MO ND 5260 5320 0.218
23 3 15E CC MO ND 5500 5720 0.206
23 4 15E CC MO ND 5510 5710 0.217
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
24 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
25 1 15C CC 2402 2480 0.001
25 2 15C CC MO 2412 2462 0.172
25 3 15C CC MO 5745 5825 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
26 1 15C CC MO 2412 2462 0.172
26 2 15C CC MO 5745 5825 0.214
26 3 15C CC 2402 2480 0.001
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
27 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
28 1 15C CC MO 2412 2462 0.172
28 2 15C CC MO 5745 5825 0.214
28 3 15C CC 2402 2480 0.001
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
29 1 15E CC MO 5180 5240 0.049
29 2 15E CC MO ND 5260 5320 0.218
29 3 15E CC MO ND 5500 5720 0.206
29 4 15E CC MO ND 5510 5710 0.217
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
30 1 15C CC MO 2412 2462 0.172
30 2 15C CC MO 5745 5825 0.214
30 3 15C CC 2402 2480 0.001
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
31 1 15E CC MO 5180 5240 0.049
31 2 15E CC MO ND 5260 5320 0.218
31 3 15E CC MO ND 5500 5720 0.206
31 4 15E CC MO ND 5510 5710 0.217
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
32 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
33 1 15E CC MO 5180 5240 0.049
33 2 15E CC MO ND 5260 5320 0.218
33 3 15E CC MO ND 5500 5720 0.206
33 4 15E CC MO ND 5510 5710 0.217
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
34 1 15C CC MO 2412 2462 0.172
34 2 15C CC MO 5745 5825 0.214
34 3 15C CC 2402 2480 0.001
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
35 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
36 1 15B
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
37 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
38 1 15C CC MO 2412 2462 0.172
38 2 15C CC MO 5745 5825 0.214
38 3 15C CC 2402 2480 0.001
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
39 1 15E CC MO 5180 5240 0.049
39 2 15E CC MO ND 5260 5320 0.218
39 3 15E CC MO ND 5500 5720 0.206
39 4 15E CC MO ND 5510 5710 0.217

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC