FCC ID: QDS-BRCM1075 802.11abgn/ac WLAN+Bluetooth4.0 NGFF2230 Mini Card

by: Broadcom Corporation latest update: 2016-02-17 model: BRCM1075

Thirty Six grants have been issued under this FCC ID from 02/13/2014 to 02/17/2016 (this is one of forty-one releases in 2016 for this grantee). Public details available include frequency information, manuals, and internal & external photos. some products also feature user submitted or linked password defaults, drivers, troubleshooting guides, instructions, & warrantee terms.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various Manual 2 Users Manual pdf 335.35 KiB January 09 2015
various OEM installation Guide Users Manual pdf 196.86 KiB
various User Manual Part1 Users Manual pdf 95.84 KiB
various User Manual Part2 Users Manual pdf 5.05 MiB
various User manual Users Manual pdf 534.32 KiB
various User manual 1) Users Manual pdf 4.11 MiB
various User manual 2) Users Manual pdf 335.66 KiB
various User manual 3) Users Manual pdf 3.04 MiB
various Cover Letter(s) pdf
various Test Setup Photos pdf
various RF Exposure Info pdf
various Test Report pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Cover Letter(s) pdf
various External Photos pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various RF Exposure Info pdf
various Internal Photos pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various ID Label/Location Info pdf
various Test Setup Photos pdf
various ID Label/Location Info pdf
various RF Exposure Info pdf
various External Photos pdf
various Internal Photos pdf
various Test Setup Photos pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various ID Label/Location Info pdf
various ID Label/Location Info pdf
various Cover Letter(s) pdf
various RF Exposure Info pdf
various Cover Letter(s) pdf January 09 2015
various External Photos pdf January 09 2015
various Cover Letter(s) pdf January 09 2015
various Cover Letter(s) pdf January 09 2015
various RF Exposure Info pdf January 09 2015
various Internal Photos pdf January 09 2015
various Cover Letter(s) pdf January 09 2015
various Cover Letter(s) pdf January 09 2015
various RF Exposure Info pdf January 09 2015
various RF Exposure Info pdf January 09 2015
various Test Setup Photos pdf January 09 2015
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various External Photos pdf
various Internal Photos pdf
various ID Label/Location Info pdf
various Cover Letter(s) pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Test Setup Photos pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various External Photos pdf
various Internal Photos pdf
various Test Setup Photos pdf
various Test Setup Photos pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Test Report pdf
various Test Setup Photos pdf
various Test Report pdf
various Test Setup Photos pdf
various Test Setup Photos pdf
various Test Setup Photos pdf
various RF Exposure Info pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Test Setup Photos pdf
various Test Setup Photos pdf
various Test Setup Photos pdf
various Test Report pdf
various Test Report pdf
various Test Setup Photos pdf
various Test Report pdf
various Test Report pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various ID Label/Location Info pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Test Setup Photos pdf
various Cover Letter(s) pdf December 09 2014
various RF Exposure Info pdf December 09 2014
various Manual 2 Users Manual pdf 335.35 KiB January 09 2015
various OEM installation Guide Users Manual pdf 196.86 KiB
various User Manual Part1 Users Manual pdf 95.84 KiB
various User Manual Part2 Users Manual pdf 5.05 MiB
various User manual Users Manual pdf 534.32 KiB
various User manual 1) Users Manual pdf 4.11 MiB
various User manual 2) Users Manual pdf 335.66 KiB
various User manual 3) Users Manual pdf 3.04 MiB

frequency equipment class purpose
1 2016-02-17 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
2 2015-09-30 5745 ~ 5825 DTS - Digital Transmission System
3 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
4 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
5 2015-09-22 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
6 5745 ~ 5825 DTS - Digital Transmission System
7 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
8 2015-09-01 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
9 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
10 5745 ~ 5825 DTS - Digital Transmission System
11 2015-08-19 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
12 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
13 5745 ~ 5825 DTS - Digital Transmission System
14 2015-03-25 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
15 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
16 5745 ~ 5825 DTS - Digital Transmission System
17 2015-03-21 5745 ~ 5825 DTS - Digital Transmission System
18 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
19 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
20 2015-01-26 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
21 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
22 5745 ~ 5825 DTS - Digital Transmission System
23 2014-09-12 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
24 5745 ~ 5825 DTS - Digital Transmission System
25 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
26 2014-07-30 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
27 5745 ~ 5825 DTS - Digital Transmission System
28 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
29 2014-05-20 5745 ~ 5825 DTS - Digital Transmission System
30 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
31 JBP - Part 15 Class B Computing Device Peripheral
32 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
33 2014-02-13 5745 ~ 5825 DTS - Digital Transmission System Original Equipment
34 JBP - Part 15 Class B Computing Device Peripheral
35 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
36 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX

Application Forms

app s Applicant Information
various Effective 2016-02-17
various 2015-09-30
various 2015-09-22
various 2015-09-01
various 2015-08-19
various 2015-03-25
various 2015-03-21
various 2015-01-26
various 2014-09-12
various 2014-07-30
various 2014-05-20
various 2014-02-13
various Applicant's complete, legal business name Broadcom Corporation
various FCC Registration Number (FRN) 0007091952
various Physical Address 270 Innovation Drive
various San Jose, California 95134
various United States
app s TCB Information
various TCB Application Email Address L******@ul.com
various T******@TIMCOENGR.COM
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code QDS
various Equipment Product Code BRCM1075
app s Person at the applicant's address to receive grant or for contact
various Name A**** L******
various Title Manager, Compliance Engineering
various Telephone Number 40892********
various Fax Number 408-5********
various E-mail a******@broadcom.com
app s Technical Contact
various Firm Name Compliance Certification Services Inc.
various Sporton International Inc.
various SPORTON International Inc.
various Name K******** C********
various D****** C********
various V****** H****
various S**** J******
various Physical Address No.11, Wugong 6th Rd., Wugu Dist.
various No.8, Lane 724, Bo-ai St., Jhubei City, Hsinchu Co
various No.8, Lane 724, Bo-ai St., Jhubei City
various New Taipei city, 24891
various New Taipei City, 24891
various Hsinchu, 302
various Taiwan
various Tanzania
various Telephone Number 886-2********
various 886-3********
various 886-3******** Extension:
various Fax Number 886-2********
various 886-3********
various E-mail a******@ccsrf.com
various v******@sporton.com.tw
various s******@sporton.com.tw
app s Non Technical Contact
various Firm Name Compliance Certification Services Inc.
various Sporton International Inc.
various SPORTON International Inc.
various Name K****** C****
various D******** C****
various V******** H********
various S******** J******
various Physical Address No.11, Wugong 6th Rd., Wugu Dist.
various No.8, Lane 724, Bo-ai St., Jhubei City, Hsinchu Co
various No.8, Lane 724, Bo-ai St., Jhubei City
various New Taipei City, 24891
various Hsinchu, 302
various Taiwan
various Telephone Number 886-2********
various 886-3********
various Fax Number 886-2********
various 886-2********
various 886-3********
various E-mail a******@ccsrf.com
various v******@sporton.com.tw
various s******@sporton.com.tw
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
variousYes
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)03/14/2016
various03/17/2016
various02/14/2016
various02/15/2016
various09/18/2015
various07/25/2015
various02/28/2015
various10/02/2014
various11/01/2014
various08/13/2014
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassNII - Unlicensed National Information Infrastructure TX
variousDTS - Digital Transmission System
variousDSS - Part 15 Spread Spectrum Transmitter
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)802.11abgn/ac WLAN+Bluetooth4.0 NGFF2230 Mini Card
various802.11a/b/g/n/ac WLAN + Bluetooth 4.0 NGFF2230 Mini Card
variousBroadcom 802.11a/b/g/n/ac WLAN + Bluetooth 4.0 NGFF2230 Mini Card
various802.11abgn/acWLAN+Bluetooth 4.0 NGFF2230 Mini Card
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousModular Equipment TypeSingle Modular Approval
variousLimited Single Modular Approval
variousDoes not apply
variousPurpose / Application is forClass II permissive change or modification of presently authorized equipment
variousOriginal Equipment
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsClass II permissive change to show compliance with new UNII rules. Power output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in all bands. This device supports mobile and portable configurations. For mobile configuration, approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo ideapad Y700-17ISK) at reduced power described in this filing. The highest reported body and simultaneous SAR values for this filing is 0.56 W/Kg and 0.58 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.92 W/Kg and 0.98 W/Kg respectively. Power output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. 802.11 operations in the 2.4 GHz band support only 20 MHz and 40MHz bandwidths. Approval is valid when antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo ideapad Y700-17ISK) at reduced power described in this filing. The highest reported body and simultaneous SAR values for this filing is 0.58W/kg and 0.59 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.14 W/Kg and 0.98 W/Kg respectively. Power output listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in all bands. Approval is valid when antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo ideapad Y700-17ISK) at reduced power described in this filing. The highest reported SAR value for this filing is <0.1 W/kg. Output power is conducted. Approval is valid when antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo YOGA 700-14ISK) at reduced power described in this filing. Output power is conducted. Approval is valid when antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo YOGA 700-14ISK) at reduced power described in this filing. The highest reported body SAR for this filing is 0.94 W/Kg. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.92 W/Kg and 0.98 W/Kg respectively. Power output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. 802.11 operations in the 2.4 GHz band support 20 MHz and 40MHz bandwidths. Approval is valid when antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo YOGA 700-14ISK) at reduced power described in this filing. The highest reported body SAR for this filing is 1.27 W/Kg. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.14 W/Kg and 0.98 W/Kg respectively. Power output listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in all bands. Approval is valid when antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host ((Lenovo ideapad Y700-15ACZ, Lenovo ideapad Y700-15ISK, Lenovo ideapad Y700 Touch-15ISK) at reduced power described in this filing. The highest reported body and simultaneous SAR values for this filing is 0.30 W/kg and 0.35 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.14 W/Kg and 0.98 W/Kg respectively. Power output listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in all bands. Approval is valid when antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo ideapad Y700-15ACZ, Lenovo ideapad Y700-15ISK, Lenovo ideapad Y700 Touch-15ISK) at reduced power described in this filing. The highest reported SAR value for this filing is <0.1 W/kg. Output power is conducted. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo ideapad Y700-15ACZ, Lenovo ideapad Y700-15ISK, Lenovo ideapad Y700 Touch-15ISK) at reduced power described in this filing. The highest reported body and simultaneous SAR values for this filing is 0.30 W/Kg and 0.35 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.92 W/Kg and 0.98 W/Kg respectively. Power output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. 802.11 operations in the 2.4 GHz band support only 20 MHz and 40MHz bandwidths. Approval is valid when antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo Flex 3-1470, Flex 3-1435, Flex 3-1475) at reduced power described in this filing. MIMO operations are disabled and 802.11 can only support SISO operations in this host. The highest reported SAR value for this filing is 1.09 W/kg. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.14 W/Kg and 0.98 W/Kg respectively. Power output listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in all bands. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo Flex 3-1470, Flex 3-1435, Flex 3-1475) at reduced power described in this filing. Output power is conducted. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host ((Lenovo Flex 3-1470, Flex 3-1435, Flex 3-1475) at reduced power described in this filing. MIMO operations are disabled and 802.11 can only support SISO operations in this host. The highest reported SAR value for this filing is 0.74 W/kg. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.92 W/Kg and 0.98 W/Kg respectively. Power output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. 802.11 operations in the 2.4 GHz band support only 20 MHz bandwidths. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo Flex 3-1570, Flex 3-1535) at reduced power described in this filing. Output power is conducted. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo Flex 3-1570, Flex 3-1535) at reduced power described in this filing. MIMO operations are disabled and 802.11 can only support SISO operations in this host. The highest reported SAR value for this filing is 1.30 W/kg. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.14 W/Kg and 0.98 W/Kg respectively. Power output listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in all bands. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo Flex 3-1570, Flex 3-1535) at reduced power described in this filing. MIMO operations are disabled and 802.11 can only support SISO operations in this host. The highest reported SAR value for this filing is 1.04 W/kg. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.92 W/Kg and 0.98 W/Kg respectively. Power output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. 802.11 operations in the 2.4 GHz band support only 20 MHz bandwidths. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo Flex 3-1470, Flex 3-1435, Flex 3-1475) at reduced power described in this filing. MIMO operations are disabled and 802.11 can only support SISO operations in this host. The highest reported SAR value for this filing is 0.78 W/kg. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.92 W/Kg and 0.98 W/Kg respectively. Power output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. 802.11 operations in the 2.4 GHz band support only 20 MHz bandwidths. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo Flex 3-1470, Flex 3-1435, Flex 3-1475) at reduced power described in this filing. Output power is conducted. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo Flex 3-1470, Flex 3-1435, Flex 3-1475) at reduced power described in this filing. MIMO operations are disabled and 802.11 can only support SISO operations in this host. The highest reported SAR value for this filing is 0.98 W/kg. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.14 W/Kg and 0.98 W/Kg respectively. Power output listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in all bands. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo Yoga 3 14 Haydn) that described in this filing. MIMO operations are disabled and 802.11 can only support SISO operations in this host. The highest reported SAR value for this filing is 1.14 W/kg. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.14 W/Kg and 0.98 W/Kg respectively. Power output listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in all bands. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo Yoga 3 14 Haydn) that described in this filing. Output power is conducted. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo Yoga 3 14 Haydn) that described in this filing. MIMO operations are disabled and 802.11 can only support SISO operations in this host. The highest reported SAR value for this filing is 0.87 W/kg. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.92 W/Kg and 0.98 W/Kg respectively. Power output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. 802.11 operations in the 2.4 GHz band support only 20 MHz bandwidths. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host described in this filing. User installation requires the BIOS lock feature described in previous filings. Installation and operation is allowed only at the powers reported in this filing. The highest reported SAR is 0.82 W/kg. Power output listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. 802.11. operations in the 2.4 GHz band support only 20 MHz bandwidths. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host described in this filing. User installation requires the BIOS lock feature described in previous filings. Installation and operation is allowed only at the powers reported in this filing. The highest reported SAR is 0.92 W/kg. Power output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. 802.11 operations in the 2.4 GHz band support only 20 MHz bandwidths. Approval for mobile installation is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host described in this filing. User installation requires the BIOS lock feature described in previous filings. Output power is conducted. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousPower output listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in all bands. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. (Original Grant Date: 02/13/2014) Class II Permissive Change: Limited single modular approval. This Class II Permissive Change is to install this module into a Lenovo Notebook computer, Model Number: TP00067A. SAR compliance for portable use in this final host configuration has been evaluated as described in this filing. This device must use a BIOS lock mechanism which ensures that it only operates with the hosts as specified in the Certification filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. The highest reported SAR values for stand-alone and simultaneous transmission exposure conditions are 0.88W/kg and 0.98W/kg, respectively.
variousPower output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. 802.11 operations in the 2.4 GHz band support only 20 MHz bandwidths. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. (Original Grant Date: 02/13/2014) Class II Permissive Change: Limited single modular approval. This Class II Permissive Change is to install this module into a Lenovo Notebook computer, Model Number: TP00067A. SAR compliance for portable use in this final host configuration has been evaluated as described in this filing. This device must use a BIOS lock mechanism which ensures that it only operates with the hosts as specified in the Certification filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. The highest reported SAR values for stand-alone and simultaneous transmission exposure conditions are 0.88W/kg and 0.98W/kg, respectively.
variousOutput power is conducted. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. (Original Grant Date: 02/13/2014) Class II Permissive Change: Limited single modular approval. This Class II Permissive Change is to install this module into a Lenovo Notebook computer, Model Number: TP00067A. SAR compliance for portable use in this final host configuration has been evaluated as described in this filing. This device must use a BIOS lock mechanism which ensures that it only operates with the hosts as specified in the Certification filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. The highest reported SAR values for stand-alone and simultaneous transmission exposure conditions are 0.88W/kg and 0.98W/kg, respectively.
variousClass II Permissive Change to allow portable configuration in tablets with a 10mm antenna-to-enclosure separation distance or in the keyboard/display section of laptops with 5 mm antenna to user separation and to introduce a BIOS lock feature to allow user installation. Installation and operation is allowed only at the decreased powers reported in this filing. The highest reported SAR is 0.79 W/kg. Power output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. 802.11 operations in the 2.4 GHz band support only 20 MHz bandwidths. Approval for mobile installation is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in tablets with a 10mm antenna-to-enclosure separation distance or in the keyboard/display section of laptops with 5 mm antenna to user separation and to introduce a BIOS lock feature to allow user installation. Output power is conducted. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to allow portable configuration in tablets with a 10mm antenna-to-enclosure separation distance or in the keyboard/display section of laptops with 5 mm antenna to user separation and to introduce a BIOS lock feature to allow user installation. Installation and operation is allowed only at the decreased powers reported in this filing. The highest reported SAR is 0.80 W/kg. Power output listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. 802.11. operations in the 2.4 GHz band support only 20 MHz bandwidths. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousPower output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. 802.11 operations in the 2.4 GHz band support only 20 MHz bandwidths. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousOutput power is conducted. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousPower output listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in all bands. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name Sporton International Inc
various Compliance Certification Services (KunShan) Inc.
various Cerpass Technology (SuZhou) Co., Ltd.
various Compliance Certification Services Inc.
various Sporton International Inc.
various Name J****** T********
various K**** C********
various M******** C******
various H**** L****
various W****** C****
various A**** C****
various Telephone Number 88633******** Extension:
various 88633******** Extension:
various 86-05******** Extension:
various 886-2******** Extension:
various 886-3******** Extension:
various 886-3******** Extension:
various 886-3******** Extension:
various Fax Number 88633********
various 86-05********
various 886-2********
various 886-3********
various 886-3********
various 886-3********
various E-mail j******@sporton.com.tw
various k******@tw.ccsemc.com
various m******@cerpass.net
various h******@sgs.com
various w******@ccsrf.com
various k******@ccsrf.com
various a******@sporton.com.tw
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E 38 CC MO 5180 5240 0.049
1 2 15E 38 CC MO ND 5260 5320 0.133
1 3 15E 38 CC MO ND 5500 5720 0.139
1 4 15E 38 CC MO 5745 5825 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC MO 2402 2480 0.002
2 2 15C CC MO 2412 2462 0.139
2 3 15C CC MO 5745 5825 0.112
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15E CC MO 5180 5240 0.049
3 2 15E CC MO 5260 5320 0.133
3 3 15E CC MO 5500 5720 0.139
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402 2480 0.002
6 2 15C CC MO 2412 2462 0.139
6 3 15C CC MO 5745 5825 0.112
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15E CC MO 5180 5240 0.049
7 2 15E CC MO 5260 5320 0.133
7 3 15E CC MO 5500 5720 0.139
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15E CC MO 5180 5240 0.049
8 2 15E CC MO 5260 5320 0.133
8 3 15E CC MO 5500 5720 0.139
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15C CC 2402 2480 0.002
10 2 15C CC MO 2412 2462 0.139
10 3 15C CC MO 5745 5825 0.112
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15E CC MO 5180 5240 0.049
11 2 15E CC MO 5260 5320 0.133
11 3 15E CC MO 5500 5720 0.139
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15C CC 2402 2480 0.002
13 2 15C CC MO 2412 2462 0.139
13 3 15C CC MO 5745 5825 0.112
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15E CC MO 5180 5240 0.049
15 2 15E CC MO 5260 5320 0.133
15 3 15E CC MO 5500 5720 0.139
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15C CC 2402 2480 0.002
16 2 15C CC MO 2412 2462 0.139
16 3 15C CC MO 5745 5825 0.112
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15C CC 2402 2480 0.002
17 2 15C CC MO 2412 2462 0.139
17 3 15C CC MO 5745 5825 0.112
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15E CC MO 5180 5240 0.049
19 2 15E CC MO 5260 5320 0.133
19 3 15E CC MO 5500 5720 0.139
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 15E CC 5180 5240 0.049
20 2 15E CC 5260 5320 0.133
20 3 15E CC 5500 5720 0.139
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
21 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
22 1 15C CC 2412 2462 0.139
22 2 15C CC 5745 5825 0.112
22 3 15C CC 2402 2480 0.002
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
23 1 15E CC MO 5180 5240 0.049
23 2 15E CC MO 5260 5320 0.133
23 3 15E CC MO 5500 5720 0.139
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
24 1 15C CC 2402 2480 0.002
24 2 15C CC MO 2412 2462 0.139
24 3 15C CC MO 5745 5825 0.112
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
25 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
26 1 15E CC MO 5180 5240 0.049
26 2 15E CC MO 5260 5320 0.133
26 3 15E CC MO 5500 5720 0.139
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
27 1 15C CC MO 2412 2462 0.139
27 2 15C CC MO 5745 5825 0.112
27 3 15C CC 2402 2480 0.002
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
28 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
29 1 15C CC 2402 2480 0.002
29 2 15C CC MO 2412 2462 0.139
29 3 15C CC MO 5745 5825 0.112
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
30 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
31 1 15B CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
32 1 15E CC MO 5180 5240 0.049
32 2 15E CC MO 5260 5320 0.133
32 3 15E CC MO 5500 5720 0.139
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
33 1 15C CC MO 2412 2462 0.139
33 2 15C CC MO 5745 5825 0.112
33 3 15C CC 2402 2480 0.002
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
34 1 15B CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
35 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
36 1 15E CC MO 5180 5240 0.049
36 2 15E CC MO 5260 5320 0.133
36 3 15E CC MO 5500 5720 0.139

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC