all | frequencies |
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
various |
|
Manual | Users Manual | 3.99 MiB | ||||
various |
|
User Manual OEM | Users Manual | 332.93 KiB | / November 11 2014 | |||
various |
|
User Manual Regulatory | Users Manual | 641.40 KiB | / November 11 2014 | |||
various | Cover Letter(s) | June 02 2016 / October 02 2016 | ||||||
various | Cover Letter(s) | June 02 2016 / October 02 2016 | ||||||
various | Test Report | June 02 2016 / October 02 2016 | ||||||
various | RF Exposure Info | June 02 2016 / October 02 2016 | ||||||
various | Test Setup Photos | October 02 2016 | ||||||
various | Cover Letter(s) | |||||||
various | Cover Letter(s) | |||||||
various | Cover Letter(s) | |||||||
various | Test Setup Photos | |||||||
various | ID Label/Location Info | |||||||
various | ID Label/Location Info | |||||||
various | RF Exposure Info | |||||||
various | Test Setup Photos | |||||||
various | Test Report | |||||||
various | Test Setup Photos | |||||||
various | Attestation Statements | |||||||
various | Test Setup Photos | |||||||
various | Attestation Statements | |||||||
various | Test Setup Photos | |||||||
various | Test Report | |||||||
various | Test Report | |||||||
various | Cover Letter(s) | February 10 2014 | ||||||
various | Test Setup Photos | February 10 2014 / January 04 2015 | ||||||
various | Cover Letter(s) | February 10 2014 | ||||||
various | Test Report | February 10 2014 | ||||||
various | Cover Letter(s) | February 10 2014 | ||||||
various | Test Setup Photos | February 10 2014 / January 04 2015 | ||||||
various | RF Exposure Info | February 10 2014 | ||||||
various | Test Report | February 10 2014 | ||||||
various | Test Report | February 10 2014 | ||||||
various | Test Report | February 10 2014 | ||||||
various | Cover Letter(s) | |||||||
various | Cover Letter(s) | |||||||
various | ID Label/Location Info | |||||||
various | RF Exposure Info | |||||||
various | Cover Letter(s) | |||||||
various | External Photos | / November 11 2014 | ||||||
various | Internal Photos | / November 11 2014 | ||||||
various | Test Setup Photos | / November 11 2014 | ||||||
various | Test Report | |||||||
various | Test Report | |||||||
various | Attestation Statements | |||||||
various | Test Setup Photos | / November 11 2014 | ||||||
various | Test Setup Photos | / November 11 2014 | ||||||
various | Test Report | |||||||
various | Internal Photos | / November 11 2014 | ||||||
various | Test Setup Photos | / November 11 2014 | ||||||
various | Test Report | |||||||
various | Test Report | |||||||
various | Test Report |
various | Manual | Users Manual | 3.99 MiB |
E9054 First Edition May 2014 Notebook PC E-Manual COPYRIGHT INFORMATION No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (ASUS). ASUS PROVIDES THIS MANUAL AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
(INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners benefit, without intent to infringe. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Copyright 2014 ASUSTeK COMPUTER INC. All Rights Reserved. LIMITATION OF LIABILITY Circumstances may arise where because of a default on ASUS part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other actual and direct damages resulted from omission or failure of performing legal duties under this Warranty Statement, up to the listed contract price of each product. ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement. This limit also applies to ASUS suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible. UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY. SERVICE AND SUPPORT Visit our multi-language web site at http://support.asus.com 2 Notebook PC E-Manual Table of Contents About this manual .....................................................................................................7 Conventions used in this manual .............................................................................8 Icons ....................................................................................................................................8 Typography .......................................................................................................................8 Safety precautions .....................................................................................................9 Using your Notebook PC ..............................................................................................9 Caring for your Notebook PC .....................................................................................10 Proper disposal ................................................................................................................11 Chapter 1: Hardware Setup Getting to know your Notebook PC ...................................................................14 Top View .............................................................................................................................14 Right Side ..........................................................................................................................17 Left Side .............................................................................................................................18 Front Side ..........................................................................................................................20 Chapter 2: Using your Notebook PC Getting started ...........................................................................................................22 Charge your Notebook PC. .........................................................................................22 Lift to open the display panel. ..................................................................................24 Press the power button. ..............................................................................................24 Connecting external devices .................................................................................25 Connecting to an external display ...........................................................................25 Gestures for the touch screen panel and touchpad .....................................26 Using touch screen panel gestures ..........................................................................26 Using touchpad gestures.............................................................................................30 Using the keyboard ...................................................................................................37 Function keys ...................................................................................................................37 Windows 8.1 keys .........................................................................................................38 3 Notebook PC E-Manual Chapter 3: Working with Windows 8.1 Starting for the first time .........................................................................................40 Windows UI .................................................................................................................41 Start screen .......................................................................................................................41 Hotspots .............................................................................................................................42 Start button ......................................................................................................................45 Customizing your Start screen ...................................................................................47 Working with Windows apps ...............................................................................48 Launching apps ...............................................................................................................48 Customizing apps ...........................................................................................................48 Accessing the Apps screen ..........................................................................................51 Charms bar ........................................................................................................................53 Snap feature .....................................................................................................................56 Other keyboard shortcuts ......................................................................................58 Connecting to wireless networks ........................................................................60 Wi-Fi .....................................................................................................................................60 Bluetooth ..........................................................................................................................61 Airplane mode .................................................................................................................62 Connecting to wired networks .............................................................................63 Configuring a dynamic IP/PPPoE network connection ....................................63 Configuring a static IP network connection .........................................................64 Turning your Notebook PC off ..............................................................................65 Putting your Notebook PC to sleep .........................................................................65 Windows 8.1 lock screen ........................................................................................66 To proceed from the lock screen ...............................................................................66 Customizing your lock screen ....................................................................................67 4 Notebook PC E-Manual Chapter 4: Power-On Self-Test (POST) The Power-On Self-Test (POST) .............................................................................70 Using POST to access BIOS and Troubleshoot......................................................70 BIOS ................................................................................................................................70 Accessing BIOS ................................................................................................................70 BIOS Settings ....................................................................................................................71 Troubleshoot ...............................................................................................................81 Refresh your PC ...............................................................................................................81 Reset your PC ...................................................................................................................82 Advanced options ..........................................................................................................83 Tips and FAQs Useful tips for your Notebook PC ........................................................................86 Hardware FAQs ...........................................................................................................87 Software FAQs .............................................................................................................90 Appendices DVD-ROM Drive Information (on selected models) ...........................................94 Blu-ray ROM Drive Information (on selected models).......................................96 Internal Modem Compliancy .....................................................................................96 Overview ............................................................................................................................97 Network Compatibility Declaration .........................................................................97 Non-Voice Equipment ..................................................................................................97 Federal Communications Commission Interference Statement ...................99 RF Exposure Information (SAR) ..................................................................................100 Declaration of Conformity (R&TTE directive 1999/5/EC) ..................................101 CE Marking ........................................................................................................................101 RF Exposure information (SAR) - CE .........................................................................102 Radio Frequency (RF) Exposure Information .......................................................102 5 Notebook PC E-Manual Informations concernant lexposition aux frquences radio (RF) ................102 Canada, Industry Canada (IC) Notices ....................................................................103 Canada, avis dIndustrie Canada (IC) .......................................................................103 5G (IC requirement) .......................................................................................................103 5G band 2 ..........................................................................................................................104 JATE ......................................................................................................................................104 IC Radiation Exposure Statement for Canada ......................................................104 Dclaration dIndustrie Canada relative lexposition aux ondes radio ...105 Wireless Operation Channel for Different Domains ...........................................106 France Restricted Wireless Frequency Bands .......................................................106 UL Safety Notices ............................................................................................................108 Power Safety Requirement ..........................................................................................109 TV Notices .........................................................................................................................109 REACH .................................................................................................................................109 Macrovision Corporation Product Notice ..............................................................109 Prevention of Hearing Loss .........................................................................................109 Nordic Lithium Cautions (for lithium-ion batteries) ...........................................110 Optical Drive Safety Information ..............................................................................111 CTR 21 Approval (for Notebook PC with built-in Modem) ..............................112 ENERGY STAR complied product ..............................................................................114 European Union Eco-label ...........................................................................................114 Global Environmental Regulation Compliance and Declaration ..................115 ASUS Recycling/Takeback Services ..........................................................................115 Rechargeable Battery Recycling Service in North America.............................115 Regional notice for Singapore ...................................................................................116 Regional notice for India ..............................................................................................116 Notices for removeable batteries..............................................................................116 Avis concernant les batteries remplaables..........................................................116 6 Notebook PC E-Manual About this manual This manual provides information about the hardware and software features of your Notebook PC, organized through the following chapters:
Chapter 1: Hardware Setup This chapter details the hardware components of your Notebook PC. Chapter 2: Using your Notebook PC This chapter shows you how to use the different parts of your Notebook PC. Chapter 3: Working with Windows 8.1 This chapter provides an overview of using Windows 8.1 in your Notebook PC. Chapter 4: Power-On Self-Test (POST) This chapter shows you how to use POST to change the settings of your Notebook PC. Tips and FAQs This section presents some recommended tips, hardware FAQs, and software FAQs you can refer to for maintaining and fixing common issues with your Notebook PC. Appendices This section includes notices and safety statements for your Notebook PC. 7 Notebook PC E-Manual Conventions used in this manual To highlight key information in this manual, some text are presented as follows:
IMPORTANT! This message contains vital information that must be followed to complete a task. NOTE: This message contains additional information and tips that can help complete tasks. WARNING! This message contains important information that must be followed to keep you safe while performing tasks and prevent damage to your Notebook PC's data and components. Icons The icons below indicate the devices you can use for completing a series of tasks or procedures on your Notebook PC.
= Use the touch screen panel.
= Use the touchpad.
= Use the keyboard. Typography Bold
= This indicates a menu or an item that must be selected. Italic
= This indicates sections that you can refer to in this manual. 8 Notebook PC E-Manual Safety precautions Using your Notebook PC This Notebook PC should only be used in environments with ambient temperatures between 5C (41F) and 35C (95F). Refer to the rating label on the bottom of your Notebook PC and ensure that your power adapter complies with this rating. Do not leave your Notebook PC on your lap or near any part of your body to prevent discomfort or injury from heat exposure. Do not use damaged power cords, accessories, and other peripherals with your Notebook PC. While powered on, ensure that you do not carry or cover your Notebook PC with any materials that can reduce air circulation. Do not place your Notebook PC on uneven or unstable work surfaces. You can send your Notebook PC through x-ray machines (used on items placed on conveyor belts), but do not expose them to magnetic detectors and wands. Contact your airline provider to learn about related inflight services that can be used and restrictions that must be followed when using your Notebook PC in-flight. 9 Notebook PC E-Manual Caring for your Notebook PC Disconnect the AC power and remove the battery pack (if applicable) before cleaning your Notebook PC. Use a clean cellulose sponge or chamois cloth dampened with a solution of nonabrasive detergent and a few drops of warm water. Remove any extra moisture from your Notebook PC using a dry cloth. Do not use strong solvents such as thinners, benzene, or other chemicals on or near your Notebook PC. Do not place objects on top of your Notebook PC. Do not expose your Notebook PC to strong magnetic or electrical fields. Do not use or expose your Notebook PC near liquids, rain, or moisture. Do not expose your Notebook PC to dusty environments. Do not use your Notebook PC near gas leaks. 10 Notebook PC E-Manual Proper disposal Do not throw your Notebook PC in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled bin indicates that the product
(electrical, electronic equipment and mercury-
containing button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products. Do not throw the battery in municipal waste. The symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste. 11 Notebook PC E-Manual 12 Notebook PC E-Manual Chapter 1:
Hardware Setup 13 Notebook PC E-Manual Getting to know your Notebook PC Top View NOTE: The keyboard's layout may vary per region or country. The Notebook view may also vary in appearance depending on the Notebook PC model. 14 Notebook PC E-Manual Camera indicator The camera indicator lights up when the built-in camera is in use. Camera The built-in camera allows you to take pictures or record videos using your Notebook PC. Ambient light sensor The ambient light sensor detects the amount of ambient light in your environment. It allows the system to automatically adjust the brightness of the display depending on the ambient light condition. Touch screen panel This high-definition touch screen panel provides excellent viewing features for photos, videos, and other multimedia files. It also allows you to operate Windows 8.1 using touch gestures. NOTE: For more details, refer to the Gestures for the touch screen panel and touchpad section in this manual. Airplane mode indicator This indicator lights up when the Airplane mode in your Notebook PC is enabled. Audio speakers The built-in audio speakers allow you to hear audio straight from your Notebook PC. Audio features are software-controlled. Capital lock indicator This indicator lights up when the capital lock function is activated. Using capital lock allows you to type capitalized letters
(such as A, B, C) using your Notebook PCs keyboard. 15 Notebook PC E-Manual Touchpad The touchpad allows the use of multi-gestures to navigate onscreen, providing an intuitive user experience. It also simulates the functions of a regular mouse. NOTE: For more details, refer to the Using touchpad gestures section in this manual. Power button Press the power button to turn your Notebook PC on or off. You can also use the power button to put your Notebook PC to sleep or hibernate mode and wake it up from sleep or hibernate mode. In the event that your Notebook PC becomes unresponsive, press and hold the power button for about four (4) seconds until your Notebook PC shuts down. Power indicator The power indicator lights up when the Notebook PC is turned on and blinks slowly when the Notebook PC is in sleep mode. Keyboard The keyboard provides full-sized QWERTY keys with a comfortable travel depth for typing. It also enables you to use the function keys, allows quick access to Windows, and controls other multimedia functions. NOTE: The keyboard layout differs by model or territory. 16 Notebook PC E-Manual Right Side Headphone output/microphone input combo jack port This port allows you to connect your Notebook PC to amplified speakers or headphones. You can also use this port to connect your Notebook PC to an external microphone. Memory card reader This built-in memory card reader supports SD card formats. USB 3.0 ports These Universal Serial Bus 3.0 (USB 3.0) ports provide a transfer rate of up to 5 Gbit/s and are backward compatible to USB 2.0. 17 Notebook PC E-Manual Left Side Power (DC) input port Insert the bundled power adapter into this port to charge the battery pack and supply power to your Notebook PC. WARNING! The adapter may become warm to hot while in use. Do not cover the adapter and keep it away from your body while it is connected to a power source. IMPORTANT! Use only the bundled power adapter to charge the battery pack and supply power to your Notebook PC. Mini DisplayPort Use a VGA adapter to connect your Notebook PC to a DisplayPort, VGA, DVI, or HDMI external display. 18 Notebook PC E-Manual HDMI port This port is for a High-Definition Multimedia Interface (HDMI) connector and is HDCP compliant for HD DVD, Blu-ray, and other protected content playback. USB 3.0 port with USB Charger+
This USB 3.0 (Universal Serial Bus 3.0) port provides a transfer rate of up to 5 Gbit/s and is backward compatible to USB 2.0. The icon indicates this ports USB Charger+ feature which allows you to quick-charge mobile devices even while your Notebook PC has been turned off. 19 Notebook PC E-Manual Front Side Array microphones The array microphones feature echo canceling, noise suppression, and beam forming functions for better voice recognition and audio recording. Power indicator The power indicator lights up when the Notebook PC is turned on and blinks slowly when the Notebook PC is in sleep mode. Two-color battery charge indicator The two-color LED provides a visual indication of the batterys charge status. Refer to the following table for details:
Color Solid Green Solid Orange Lights off Status The Notebook PC is plugged to a power source and the battery power is between 95% and 100%. The Notebook PC is plugged to a power source, charging its battery, and the battery power is less than 95%. The Notebook PC is running on battery mode and the battery power is between 10% to 100%. 20 Notebook PC E-Manual Chapter 2:
Using your Notebook PC 21 Notebook PC E-Manual Getting started Charge your Notebook PC. A. B. C. Connect the AC power cord to the AC/DC adapter. Plug the AC power cord into a 100V~240V power source. Connect the DC power connector into your Notebook PCs power
(DC) input port. Charge the Notebook PC for 3 hours before using it in battery mode for the first time. NOTE: The power adapter may vary in appearance, depending on models and your region. IMPORTANT!
Power adapter information:
Input voltage: 100-240Vac Input frequency: 50-60Hz Rating output current: 6.67A (130W) Rating output voltage: 19.5V 22 Notebook PC E-Manual IMPORTANT!
Locate the input/output rating label on your Notebook PC and ensure that it matches the input/output rating information on your power adapter. Some Notebook PC models may have multiple rating output currents based on the available SKU. Ensure that your Notebook PC is connected to the power adapter before turning it on for the first time. We strongly recommend that you use a grounded wall socket while using your Notebook PC on power adapter mode. The socket outlet must be easily accessible and near your Notebook PC. To disconnect your Notebook PC from its main power supply, unplug your Notebook PC from the power socket. WARNING!
Read the following precautions for your Notebook PCs battery. Only ASUS-authorized technicians should remove the battery inside the device. The battery used in this device may present a risk of fire or chemical burn if removed or disassembled. Follow the warning labels for your personal safety. Risk of explosion if battery is replaced by an incorrect type. Do not dispose of in fire. Never attempt to short-circuit your Notebook PCs battery. Never attempt to dissamble and reassemble the battery. Discontinue usage if leakage is found. The battery and its components must be recycled or disposed of properly. Keep the battery and other small components away from children. 23 Notebook PC E-Manual Lift to open the display panel. Press the power button. 24 Notebook PC E-Manual Connecting external devices Connecting to an external display Connect a compatible VGA adapter to your Notebook PC so you can connect and project your screen to an external display with a VGA cable. Refer to the following illustration when connecting your Notebook PC to an external display. VGA adapter VGA cable 25 Notebook PC E-Manual Gestures for the touch screen panel and touchpad Gestures allow you to launch programs and access the settings of your Notebook PC. Refer to the following illustrations when using hand gestures on your touch screen panel and touchpad. NOTE: The following screenshots are for reference only. The touch screen panels appearance may vary depending on model. Using touch screen panel gestures The gestures allow you to launch programs and access the settings of your Notebook PC. The functions can be activated by using the hand gestures to your Notebook PCs touch screen panel. Left edge swipe Right edge swipe Swipe from the left edge of the screen to shuffle your running apps. Swipe from the right edge of the screen to launch the Charms bar. 26 Notebook PC E-Manual Top edge swipe Finger slide Slide your finger to scroll up and down and slide your finger to pan the screen left or right. In the Start screen, swipe from the top edge of the screen to view the Customize bar. In a running app, swipe from the top edge of the screen to view its menu. Zoom out Zoom in Bring together your two fingers on the touch screen panel. Spread apart your two fingers on the touch screen panel. 27 Notebook PC E-Manual Tap/Double tap Tap/click and hold Tap an app to launch it. On Desktop mode, double-
tap an item to launch it. To move an app, tap and hold the app tile and drag it to a new location. To close an app, tap and hold the top side of the running app and drag it down to the bottom of the screen to close it. 28 Notebook PC E-Manual Swipe up Swipe down Swipe up from the Start screen to launch the Apps screen. Swipe down from the Apps screen to return to the Start screen. 29 Notebook PC E-Manual Using touchpad gestures Moving the pointer You can tap or click anywhere on the touchpad to activate its pointer, then slide your finger on the touchpad to move the pointer onscreen. Slide horizontally Slide vertically Slide diagonally 30 Notebook PC E-Manual One-finger gestures Tap/click, Double tap/click In the Start screen, tap/click an app to launch it. In Desktop mode, double tap/click an application to launch it. Drag and drop Double-tap/click an item, then slide the same finger without lifting it off the touchpad. To drop the item to its new location, lift your finger from the touchpad. 31 Notebook PC E-Manual Left-click Right-click In the Start screen, click an app to launch it. In Desktop mode, double-
click an application to launch it. In the Start screen, click an app to select it and launch the settings bar. You can also press this button to launch the All Apps bar. In Desktop mode, use this button to open the right-
click menu. NOTE: The areas inside the dotted line represent the locations of the left mouse button and the right mouse button on the touchpad. 32 Notebook PC E-Manual Top edge swipe In the Start screen, swipe from the top edge to launch the All Apps bar. In a running app, swipe from the top edge to view its menu. Left edge swipe Right edge swipe Swipe from the left edge to shuffle your running apps. Swipe the right edge to launch the Charms bar. 33 Notebook PC E-Manual Two-finger gestures Tap/click Rotate Tap/click two fingers on the touchpad to simulate the right-
click function. To rotate an image, place two fingers on the touchpad then turn one finger clockwise or counterclockwise while the other stays still. Two-finger scroll (up/down) Two-finger scroll (left/right) Slide two fingers to scroll up or down. Slide two fingers to scroll left or right. 34 Notebook PC E-Manual Zoom out Zoom in Bring together your two fingers on the touchpad. Spread apart your two fingers on the touchpad. Drag and drop Select an item then press and hold the left button. Using your other finger, slide down the touchpad to drag and drop the item to a new location. 35 Notebook PC E-Manual Three-finger gestures Swipe up Swipe down Swipe three fingers upward to show all running applications. Swipe three fingers downward to show the Desktop mode. 36 Notebook PC E-Manual Using the keyboard Function keys The function keys on your Notebook PCs keyboard can trigger the following commands:
Puts the Notebook PC into Sleep mode Turns Airplane mode on or off NOTE: When enabled, the Airplane mode disables all wireless connectivity. Decreases brightness for the backlit keyboard Increases brightness for the backlit keyboard Decreases display brightness Increases display brightness Turns the display panel off Toggles the display mode NOTE: Ensure that the second display is connected to your Notebook PC. 37 Notebook PC E-Manual Enables or disables the touchpad Turns the speaker on or off Turns the speaker volume down Turns the speaker volume up Windows 8.1 keys There are two special Windows keys on your Notebook PCs keyboard used as below:
Press this key to go back to the Start screen. If you are already in the Start screen, press this key to go back to the last app you opened. Press this key to simulate the right-click functions. 38 Notebook PC E-Manual Chapter 3:
Working with Windows 8.1 39 Notebook PC E-Manual Starting for the first time When you start your computer for the first time, a series of screens appear to guide you in configuring your Windows 8.1 operating system. To start your Notebook PC for the first time:
1. 2. 3. 4. Press the power button on your Notebook PC. Wait for a few minutes until the setup screen appears. From the setup screen, pick your region and a language to use on your Notebook PC. Carefully read the License Terms. Select I accept. Follow the onscreen instructions to configure the following basic items:
Personalize Get online Settings Your account 5. After configuring the basic items, Windows 8.1 proceeds to install your apps and preferred settings. Ensure that your Notebook PC is kept powered on during the setup process. 6. Once the setup process is complete, the Start screen appears. 40 Notebook PC E-Manual Windows UI Windows 8.1 comes with a tile-based user interface (UI) which allows you to organize and easily access Windows apps from the Start screen. It also includes the following features that you can use while working on your Notebook PC. Start screen The Start screen appears after successfully signing in to your user account. It helps organize all the applications you need in just one place. Windows Apps These are apps pinned on the Start screen and displayed on tiled-format for easy access. NOTE: Some apps require signing in to your Microsoft account before they are fully launched. 41 Notebook PC E-Manual Hotspots Onscreen hotspots allow you to launch programs and access the settings of your Notebook PC. The functions in these hotspots can be activated using the touchpad. Hotspots on a running app Hotspots on the Start screen 42 Notebook PC E-Manual Hotspot upper left corner Action Hover your mouse pointer on the upper left corner then tap/click on the recent apps thumbnail to revert back to that running app. If you launched more than one app, slide down to show all running apps. lower left corner From a running app screen:
Hover your mouse pointer on the lower left corner then tap/click to go back to the Start screen. NOTE: You can also press the Windows key on your keyboard to go back to the Start screen. From the Start screen:
Hover your mouse pointer on the lower left corner then tap/click app. to go back to that 43 Notebook PC E-Manual Hotspot top side Action Hover your mouse pointer on the top side until it changes to a hand icon. Drag then drop the app to a new location. NOTE: This hotspot function only works on a running app or when you want to use the Snap feature. For more details, refer to the Snap feature under Working with Windows apps. upper or lower right corner Hover your mouse pointer on the upper or lower right corner to launch the Charms bar. 44 Notebook PC E-Manual Start button Windows 8.1 features the Start button which allows you to switch between the two most recent apps that you opened. The Start button may be accessed from the Start screen, while on Desktop mode, and on any app that is currently open onscreen. Start button on the Start screen NOTE: The actual color of your Start button varies depending on the display settings you chose for your Start screen. Hover your mouse pointer over the left corner of your Start screen or any opened app to call out the Start button. 45 Notebook PC E-Manual Start button on Desktop mode Context menu The context menu appears as a box filled with quick access to some of the programs inside Windows 8.1 when you right-click on the Start button. The context menu also includes the following shut down options for your Notebook PC: sign out, sleep, shut down, restart. 46 Notebook PC E-Manual Customizing your Start screen Windows 8.1 also enables you to customize your Start screen, allowing you to boot directly to the Desktop mode and customize the arrangement of your apps onscreen. To customize the settings of your Start screen:
Launch the Desktop. Right-click anywhere on the taskbar, except on the Start button, to launch the pop-up window. Click Properties then select the Navigation tab to tick the Navigation and Start screen options you want to use. or 1. 2. 3. 4. Tap/click Apply to save the new settings then exit. 47 Notebook PC E-Manual Working with Windows apps Use your Notebook PCs touch screen panel*, touchpad, or keyboard to launch, customize, and close apps. Launching apps Tap an app to launch it. Position your mouse pointer over the app then left-click or tap once to launch it. Press twice then use the arrow keys to browse through the apps. Press to launch an app. Customizing apps You can move, resize, unpin, or close apps from the Start screen using the following steps:
Moving apps Tap and hold the app tile then drag it to a new location. Double-tap on the app then drag and drop the app to a new location. 48 Notebook PC E-Manual Resizing apps Tap and hold the app to activate the Customize bar then tap and select an app tile size. Right-click on the app to activate the Customize bar, then tap/click and select an app tile size. Unpinning apps Tap and hold the app to activate the Customize bar, then tap to unpin an app. Right-click on the app to activate the Customize bar then tap/click
. 49 Notebook PC E-Manual Closing apps Tap and hold the top side of the running app then drag it down to the bottom of the screen to close it. 1. 2. Move your mouse pointer on the top side of the launched app then wait for the pointer to change to a hand icon. Drag then drop the app to the bottom of the screen to close it. From the running apps screen, press
. 50 Notebook PC E-Manual Accessing the Apps screen Aside from the apps already pinned on your Start screen, you can also open other applications through the Apps screen. NOTE: Actual apps shown onscreen may vary per model. The following screenshot is for reference only. Launching the Apps screen Launch the Apps screen using your Notebook PC's touch screen panel*, touchpad, or keyboard. Swipe up on the Start screen. On the Start screen, click the button. From the Start screen, Press then press
. 51 Notebook PC E-Manual Pinning more apps on the Start screen You can pin more apps on the Start screen using your touch screen panel* or touchpad. 1. 2. Launch the All Apps screen. Tap and hold an app you want to add on the start to activate the Customize bar. Once the Customize bar is launched, you may also tap other more apps to add on the Start screen. 3. Tap to pin the selected apps on the Start screen. 1. 2. Launch the All Apps screen Right-click on the apps that you want to add on the Start screen. 3. Tap/click on the icon to pin the selected apps on the Start screen. 52 Notebook PC E-Manual Charms bar The Charms bar is a toolbar that can be triggered on the right side of your screen. It consists of several tools that allow you to share applications and provide quick access for customizing the settings of your Notebook PC. Charms bar 53 Notebook PC E-Manual Launching the Charms bar NOTE: When called out, the Charms bar initially appears as a set of white icons. The image above shows how the Charms bar looks like once activated. Use your Notebook PCs touch screen panel*, touchpad, or keyboard to launch the Charms bar. Swipe from the right edge of the screen to launch the charms bar. Move your mouse pointer on the upper or lower right corner of the screen. Press 54 Notebook PC E-Manual Inside the Charms bar Search This charm allows you to look for files, applications, or programs in your Notebook PC. Share This charm allows you to share applications via social networking sites or email. Start This charm reverts the display back to the Start screen. From the Start screen, you can also use this to revert back to a recently opened app. Devices This charm allows you to access and share files with the devices attached to your Notebook PC such as an external display or printer. Settings This charm allows you to access the PC settings of your Notebook PC. 55 Notebook PC E-Manual Snap feature The Snap feature displays two apps side-by-side, allowing you to work or switch between apps. IMPORTANT! Ensure that your Notebook PCs screen resolution is set to 1366 x 768 pixels or higher before using the Snap feature. Snap bar 56 Notebook PC E-Manual Using Snap Use your Notebook PCs touch screen panel*, touchpad, or keyboard to activate and use Snap. 1. 2. Launch the app you wish to snap. Tap and hold the apps topmost part then drag it to the left or right side of the screen until the snap bar appears. 3. Launch another app. 1. 2. 3. Launch the app you wish to snap. Hover the mouse point on the top side of your screen. Once the pointer changes to a hand icon, drag then drop the app to the left or right side of the display panel. 4. Launch another app. 1. 2. 3. Launch the app you wish to snap. and the left or right arrow key to snap Press the app to the left or right pane. Launch another app. This app is automatically placed in the empty pane. 57 Notebook PC E-Manual Other keyboard shortcuts Using the keyboard, you can also use the following shortcuts to help you launch applications and navigate Windows 8.1.
\
Switches between the Start screen and the last running app Launches the desktop Launches the This PC window on Desktop mode Opens the File option from the Search charm Opens the Share charm Opens the Settings charm Opens the Devices charm Activates the Lock screen Minimizes all currently active windows 58 Notebook PC E-Manual Launches the Project pane Opens the Everywhere option from the Search charm Opens the Run window Opens Ease of Access Center Opens the Settings option under the Search charm Opens the context menu of the Start button Launches the magnifier icon and zooms in your screen Zooms out your screen Opens the Narrator Settings 59 Notebook PC E-Manual Connecting to wireless networks Wi-Fi Access emails, surf the Internet, and share applications via social networking sites using your Notebook PCs Wi-Fi connection. IMPORTANT! The Airplane mode disables this feature. Ensure that Airplane mode is turned off before enabling the Wi-Fi connection of your Notebook PC. Enabling Wi-Fi Activate Wi-Fi in your Notebook PC using the following steps on your touch screen panel or touchpad. 1. 2. 3. 4. 5. Launch the Charms bar. Tap/click and tap/click
. Select an access point from the list of available Wi-Fi connections. Tap/click Connect to start the network connection. NOTE: You may be prompted to enter a security key to activate the Wi-Fi connection. If you want to enable sharing between your Notebook PC and other wireless-enabled systems, tap/click Yes. Tap/click No if you do not want to enable the sharing function. 60 Notebook PC E-Manual Bluetooth Use Bluetooth to facilitate wireless data transfers with other Bluetooth-
enabled devices. IMPORTANT! The Airplane mode disables this feature. Ensure that Airplane mode is turned off before enabling the Bluetooth connection of your Notebook PC. Pairing with other Bluetooth-enabled devices You need to pair your Notebook PC with other Bluetooth-enabled devices to enable data transfers. To do this, use your touchpad as follows:
1. 2. 3. 4. Launch the Charms bar. Tap/click then tap/click Change PC Settings. Under PC Settings, select Devices then tap/click Add a Device to search for Bluetooth-enabled devices. Select a device from the list. Compare the passcode on your Notebook PC with the passcode sent to your chosen device. If they are the same, tap/click Yes to successfully pair your Notebook PC with the device. NOTE: For some bluetooth-enabled devices, you may be prompted to key in the passcode of your Notebook PC. 61 Notebook PC E-Manual Airplane mode The Airplane mode disables wireless communication, allowing you to use your Notebook PC safely while in-flight. Turning Airplane mode on 1. 2. 3. or Launch the Charms bar. Tap/click and tap/click
. Move the slider to the right to turn the Airplane mode on. Press
. Turning Airplane mode off 1. 2. 3. or Launch the Charms bar. Tap/click and tap/click
. Move the slider to the left to turn the Airplane mode off. Press
. NOTE: Contact your airline provider to learn about related inflight services that can be used and restrictions that must be followed when using your Notebook PC in-flight. 62 Notebook PC E-Manual Connecting to wired networks You can also connect to wired networks, such as local area networks and broadband Internet connection, using your Notebook PCs LAN port. NOTE: Contact your Internet Service Provider (ISP) for details or your network administrator for assistance in setting up your Internet connection. To configure your settings, refer to the following procedures. IMPORTANT! Ensure that a network cable is connected between your Notebook PCs LAN port and a local area network before performing the following actions. Configuring a dynamic IP/PPPoE network connection 1. Launch Desktop. From the Windows taskbar, right-click the network 2. 3. 4. 5. icon then tap/click Open Network and Sharing Center. In the Network and Sharing Center window, tap/
click Change adapter settings. Right-click on your LAN then select Properties. Tap/click Internet Protocol Version 4(TCP/IPv4) then tap/click Properties. 63 Notebook PC E-Manual 6. Tap/click Obtain an IP address automatically then tap/click OK. NOTE: Proceed to the next steps if you are using PPPoE connection. 7. 8. 9. Return to the Network and Sharing Center window then tap/click Set up a new connection or network. Select Connect to the Internet then tap/click Next. Tap/click Broadband (PPPoE). 10. Type your User name, Password, and Connection name then tap/click Connect. 11. Tap/click Close to finish the configuration. 12. Tap/click on the taskbar then tap/click the connection you just created. 13. Type your user name and password then tap/click Connect to start connecting to the Internet. Configuring a static IP network connection 1. 2 3. 4. Repeat steps 1 to 5 under Configuring a dynamic IP/PPPoE network connection. Tap/click Use the following IP address. Type the IP address, Subnet mask and Default gateway from your service provider. If needed, you can also type the preferred DNS server address and alternate DNS server address then tap/click OK. 64 Notebook PC E-Manual Turning your Notebook PC off You can turn off your Notebook PC by doing either of the following procedures:
Tap/click from the Charms bar then or tap/click
> Shut down to do a normal shutdown. From the log-in screen, tap/click
> Shut down. You can also shut down your Notebook PC using Desktop mode. To do this, launch the desktop then press alt + f4 to launch the Shut Down window. Select Shut Down from the drop-down list then select OK. If your Notebook PC is unresponsive, press and hold the power button for at least four (4) seconds until your Notebook PC turns off. Putting your Notebook PC to sleep To put your Notebook PC on Sleep mode, press the power button once. You can also put your Notebook PC to sleep mode using Desktop mode. To do this, launch the desktop then press alt + f4 to launch the Shut Down window. Select Sleep from the drop-down list then select OK. 65 Notebook PC E-Manual Windows 8.1 lock screen The Windows 8.1 lock screen appears when you wake your Notebook PC from sleep or hibernate mode. It also appears when you lock or unlock Windows 8.1. The lock screen can be customized to regulate access to your operating system. You can change its background display and access some of your apps while your Notebook PC is still locked. To proceed from the lock screen 1. 2. Tap/click on the touchpad or press any key on your Notebook PC's keyboard.
(optional) If your account is password-protected, you need to key in the password to continue to the Start screen. or 66 Notebook PC E-Manual Customizing your lock screen You can customize your lock screen to show your preferred photo, a photo slideshow, app updates, and quickly access your Notebook PCs camera. To change the settings of your lock screen, you may refer to the following information:
Selecting a photo 1. 2. 3. Launch the Charms bar > Settings. Select Change PC Settings > Lock screen. Under the Lock screen preview, click Browse to select the photo you would like to use as a background on your lock screen. Playing a slideshow 1. 2. 3. 4. Launch the Charms bar > Settings. Select Change PC Settings > Lock screen. Under the Lock screen preview, move the Play a slide show on the lock screen slide bar to On. Scroll down to customize the following options for your lock screens slideshow:
67 Notebook PC E-Manual Adding app updates 1. 2. 3. 4. Launch the Charms bar > Settings. Select Change PC Settings > Lock screen. Scroll down until you see the Lock screen apps option. Use the following options to add the apps whose updates you would like to see from your lock screen:
Activating your Notebook PC camera from the lock screen From the lock screen, you can swipe down to activate and use your Notebook PC's camera. Refer to the following steps on how to enable this feature:
1. 2. 3. 4. Launch the Charms bar > Settings. Select Change PC Settings > Lock screen. Scroll down until you see the Camera option. Move the slide bar to On. 68 Notebook PC E-Manual Chapter 4:
Power-On Self-Test (POST) 69 Notebook PC E-Manual The Power-On Self-Test (POST) The Power-On Self-Test (POST) is a series of software-controlled diagnostic tests that run when you turn on or restart your Notebook PC. The software that controls the POST is installed as a permanent part of the Notebook PCs architecture. Using POST to access BIOS and Troubleshoot During POST, you can access the BIOS settings or run troubleshooting options using the function keys of your Notebook PC. You may refer to the following information for more details. BIOS The Basic Input and Output System (BIOS) stores system hardware settings that are needed for system startup in the Notebook PC. The default BIOS settings apply to most conditions of your Notebook PC. Do not change the default BIOS settings except in the following circumstances:
An error message appears onscreen during system bootup and requests you to run the BIOS Setup. You have installed a new system component that requires further BIOS settings or updates. WARNING: Using inappropriate BIOS settings may result to system instability or boot failure. We strongly recommend that you change the BIOS settings only with the help of a trained service personnel. Accessing BIOS Restart your Notebook PC then press during POST. 70 Notebook PC E-Manual BIOS Settings NOTE: The BIOS screens in this section are for reference only. The actual screens may differ by model and territory. Boot This menu allows you to set your boot option priorities. You may refer to the following procedures when setting your boot priority. 1. On the Boot screen, select Boot Option #1. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Main Advanced Boot Security Save & Exit Boot Configuration Fast Boot [Enabled]
Launch CSM [Disabled]
Driver Option Priorities Boot Option Priorities Boot Option #1 [Windows Boot Manager]
Add New Boot Option Delete Boot Option Sets the system boot order
: Select Screen
: Select Item Enter: Select
+/ : Change Opt. F1 : General Help F9 : Optimized Defaults F10 : Save & Exit ESC : Exit Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc. 71 Notebook PC E-Manual 2. Press and select a device as the Boot Option #1. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Main Advanced Boot Security Save & Exit Boot Configuration Fast Boot [Enabled]
Launch CSM [Disabled]
Sets the system boot order Driver Option Priorities Boot Option #1 Boot Option Priorities Windows Boot Manager Boot Option #1 [Windows Boot Manager]
Disabled Add New Boot Option Delete Boot Option
: Select Screen
: Select Item Enter: Select
+/ : Change Opt. F1 : General Help F9 : Optimized Defaults F10 : Save & Exit ESC : Exit Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc. 72 Notebook PC E-Manual Security This menu allows you to set up the administrator and user password of your Notebook PC. It also allows you to control the access to your Notebook PCs hard disk drive, input/output (I/O) interface, and USB interface. NOTE:
If you install a User Password, you will be prompted to input this before entering your Notebook PC's operating system. If you install an Administrator Password, you will be prompted to input this before entering BIOS. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Main Advanced Boot Security Save & Exit Password Description If ONLY the Administrators password is set, then this only limits access to Setup and is only asked for when entering Setup. If ONLY the users password is set, then this is a power on password and must be entered to boot or enter Setup. In Setup, the User will have Administrator rights. Administrator Password Status NOT INSTALLED User Password Status NOT INSTALLED Administrator Password User Password HDD Password Status : NOT INSTALLED Set Master Password Set User Password I/O Interface Security System Mode state User Secure Boot state Enabled Secure Boot Control [Enabled]
Key Management Set Administrator Password. The password length must be in the following range:
Minimum length 3 Maximum length 20
: Select Screen
: Select Item Enter: Select
+/ : Change Opt. F1 : General Help F9 : Optimized Defaults F10 : Save & Exit ESC : Exit Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc. 73 Notebook PC E-Manual To set the password:
1. 2. 3. On the Security screen, select Administrator Password or User Password. Type in a password then press
. Re-type to confirm the password then press
. To clear the password:
1. 2. 3. On the Security screen, select Administrator Password or User Password. Type in the current password then press
. Leave the Create New Password field blank then press
. 4. Select Yes in the confirmation box then press
. 74 Notebook PC E-Manual I/O Interface Security In the Security menu, you can access I/O Interface Security to lock or unlock some interface functions of your Notebook PC. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Security I/O Interface Security LAN Network Interface [UnLock]
Wireless Network Interface [UnLock]
HD AUDIO Interface [UnLock]
USB Interface Security LAN Network Interface Lock UnLock If Locked, LAN controller will be disabled.
: Select Screen
: Select Item Enter: Select
+/ : Change Opt. F1 : General Help F9 : Optimized Defaults F10 : Save & Exit ESC : Exit Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc. To lock an interface:
1. On the Security screen, select I/O Interface Security. 2. Select an interface you would like to lock then press
. 3. Select Lock. 75 Notebook PC E-Manual USB Interface Security Through the I/O Interface Security menu, you can also access USB Interface Security to lock or unlock ports and devices. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Security USB Interface Security USB Interface [UnLock]
If Locked, all USB device will be disabled External Ports [UnLock]
CMOS Camera [UnLock]
Card Reader [UnLock]
USB Interface Lock UnLock
: Select Screen
: Select Item Enter: Select
+/ : Change Opt. F1 : General Help F9 : Optimized Defaults F10 : Save & Exit ESC : Exit Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc. To lock the USB interface:
1. On the Security screen, select I/O Interface Security > USB Interface Security. 2. Select an interface that you would like to lock then select Lock. NOTE: Setting the USB Interface to Lock also locks and hides the External Ports and other devices included under USB Interface Security. 76 Notebook PC E-Manual Set Master Password In the Security menu, you can use Set Master Password to set up a password-enabled access to your hard disk drive. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Main Advanced Boot Security Save & Exit Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Set HDD Master Password.
***Advisable to Power Cycle System after Setting Hard Disk Passwords***
Password Description If ONLY the Administrators password is set,then this only limits access to Setup and is only asked for when entering Setup. If ONLY the users password is set, then this is a power on password and must be entered to boot or enter Setup. In Setup, the User will have Administrator rights. Administrator Password Status NOT INSTALLED User Password Status NOT INSTALLED Administrator Password User Password HDD Password Status : NOT INSTALLED Set Master Password Set User Password I/O Interface Security
: Select Screen
: Select Item Enter: Select
+/ : Change Opt. F1 : General Help F9 : Optimized Defaults F10 : Save & Exit ESC : Exit Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc. To set the HDD password:
1. On the Security screen, select Set Master Password. 2. Type in a password then press
. 3. 4. Re-type to confirm the password then press
. Select Set User Password then repeat the previous steps to set up the user password. 77 Notebook PC E-Manual Save & Exit To keep your configuration settings, select Save Changes and Exit before exiting the BIOS. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Main Advanced Boot Security Save & Exit Save Changes and Exit Discard Changes and Exit Save Options Save Changes Discard Changes Restore Defaults Boot Override Windows Boot Manager Launch EFI Shell from filesystem device Exit system setup after saving the changes.
: Select Screen
: Select Item Enter: Select
+/ : Change Opt. F1 : General Help F9 : Optimized Defaults F10 : Save & Exit ESC : Exit Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc. 78 Notebook PC E-Manual To update the BIOS:
1. 2. 3. 4. 5. Verify the Notebook PCs exact model then download the latest BIOS file for your model from the ASUS website. Save a copy of the downloaded BIOS file to a flash disk drive. Connect your flash disk drive to your Notebook PC. Restart your Notebook PC then press during POST. From the BIOS menu, Select Advanced > Start Easy Flash, then press
. Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Main Advanced Boot Security Save & Exit Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Start Easy Flash Internal Pointing Device [Enabled]
Wake on Lid Open [Enabled]
Power Off Energy Saving [Enabled]
SATA Configuration Graphics Configuration Intel (R) Anti-Theft Technology Corporation USB Configuration Network Stack Press Enter to run the utility to select and update BIOS.
: Select Screen
: Select Item Enter: Select
+/ : Change Opt. F1 : General Help F9 : Optimized Defaults F10 : Save & Exit ESC : Exit Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc. 79 Notebook PC E-Manual 6. Locate your downloaded BIOS file in the flash disk drive then press
. ASUSTek Easy Flash Utility FLASH TYPE: MXIC 25L Series New BIOS Platform: Unknown Version: Unknown Build Date: Unknown Build Time: Unknown Current BIOS Platform: NX500 Version: 101 Build Date: Oct 26 2012 Build Time: 11:51:05 FSO FS1 FS2 FS3 FS4 0 EFI
<DIR>
[]: Switch []: Choose [q]: Exit [Enter]: Enter/Execute 7. After the BIOS update process, select Exit > Restore Defaults to restore the system to its default settings. 80 Notebook PC E-Manual Troubleshoot By pressing troubleshoot options which includes the following:
during POST, you can access Windows 8.1 Refresh your PC Reset your PC Advanced options Refresh your PC Use Refresh your PC if you want to refresh your system without losing your current files and applications. To access this during POST:
1. Restart your Notebook PC then press during POST. 2. Wait for Windows to load the Choose an option screen then tap/click Troubleshoot. 3. 4. 5. 6. 7. Tap/click Refresh your PC. In the Refresh your PC screen, read the bullet points to learn more about using this option then tap/click Next. Tap/click the account you would like to refresh. Type your account password then tap/click Continue. Tap/click Refresh. IMPORTANT! Ensure that your Notebook PC is plugged in to a power source before refreshing your system. 81 Notebook PC E-Manual Reset your PC IMPORTANT! Back up all your data before performing this option. Use Reset your PC to restore your Notebook PC to its default settings. To access this during POST:
1. Restart your Notebook PC then press during POST. 2. Wait for Windows to load the Choose an option screen then tap/click Troubleshoot. 3. 4. 5. Tap/click Reset your PC. In the Reset your PC screen, read the bullet points to learn more about using this option then tap/click Next. Tap/click your preferred reset option: Just remove my files or Fully clean the drive. 6. Tap/click Reset. IMPORTANT! Ensure that your Notebook PC is plugged in to a power source before resetting your system. 82 Notebook PC E-Manual Advanced options Use Advanced options to perform additional troubleshooting options in your Notebook PC. To access this during POST:
1. Restart your Notebook PC then press during POST. 2. Wait for Windows to load the Choose an option screen then tap/click Troubleshoot. 3. 4. 5. Tap/click Advanced options. In the Advanced options screen, select the troubleshooting option you wish to perform. Follow the succeeding steps to complete the process. Using System Image Recovery Under Advanced options, you can use System Image Recovery to recover your system using your Notebook PCs original image file. To access this during POST:
1. Restart your Notebook PC then press during POST. 2. Wait for Windows to load the Choose an option screen then tap/click Troubleshoot. 3. Tap/click Advanced options. 83 Notebook PC E-Manual 4. 5. 6. 7. 8. In the Advanced options screen, select System Image Recovery. Choose an account you would like to recover using a system image file. Type your account password then tap/click Continue. Select Use the latest available system image
(recommended), then tap/click Next. You can also choose Select a system image if your system image is in an external device or DVD. Follow the succeeding steps to complete the system image recovery procedure. NOTE: We strongly recommend that you regularly backup your system to prevent data loss in case your Notebook PC stops working. 84 Notebook PC E-Manual Tips and FAQs 85 Notebook PC E-Manual Useful tips for your Notebook PC To help you maximize the use of your Notebook PC, maintain its system performance, and ensure all your data are kept secured, here are some useful tips that you can follow:
Update Windows periodically to ensure that your applications have the latest security settings. Use ASUS Live Update to update ASUS-exclusive applications, drivers and utilities in your Notebook PC. Refer to the ASUS Tutor installed in your Notebook PC for more details. Use an anti-virus software to protect your data and keep this updated too. Unless absolutely necessary, refrain from using force shutdown to turn off your Notebook PC. Always backup your data and make it a point to create a backup data in an external storage drive. Refrain from using the Notebook PC at extremely high temperatures. If you are not going to use your Notebook PC for a long period of time (at least a month), we recommend that you take out the battery if the battery is removable. Disconnect all external devices and ensure you have the following items prior to resetting your Notebook PC:
-
-
-
-
Product key for your operating systems and other installed applications Backup data Log in ID and password Internet connection information 86 Notebook PC E-Manual Hardware FAQs 1. A black dot, or sometimes a colored dot, appears onscreen when I turn on the Notebook PC. What should I do?
Although these dots normally appear onscreen, they will not affect your system. If the incident continues and subsequently affects system performance, consult an authorized ASUS service center. 2. My display panel has an uneven color and brightness. How can I fix this?
The color and brightness of your display panel may be affected by the angle and current position of your Notebook PC. The brightness and color tone of your Notebook PC may also vary per model. You may use the function keys or the display settings in your operating system to adjust the appearance of your display panel. 3. How can I maximize my Notebook PC s battery life?
You can try doing any of the following suggestions:
Use the function keys to adjust the display brightness. If you are not using any Wi-Fi connection, switch your system into Airplane mode. Disconnect unused USB devices. Close unused applications, especially those that take up too much system memory. 87 Notebook PC E-Manual 4. My battery charge indicator does not light up. Whats wrong?
Check whether the power adapter or battery pack is attached correctly. You may also disconnect the power adapter or battery pack, wait for a minute, then reconnect them again to the power outlet and Notebook PC. If the problem still exists, contact your local ASUS service center for assistance. 5. Why is my touchpad not working?
Press to enable your touchpad. Check if ASUS Smart Gesture has been set to disable the touchpad when connecting an external pointing device. 6. When I play audio and video files, why cant I hear any sound from my Notebook PCs audio speakers?
You can try doing any of the following suggestions:
Press to turn up the speaker volume. Check if your speakers were set to mute. Check if a headphone jack is connected to your Notebook PC and remove it. 7. What should I do if my Notebook PCs power adapter gets lost or my battery stops working?
Contact your local ASUS service center for assistance. 88 Notebook PC E-Manual 8. Why does audio still come out from my Notebook PCs audio speakers even if I already connected my headphone into the right jack port?
Go to Control Panel > Hardware and Sound then access Audio Manager to configure the settings. 9. My Notebook PC cannot do keystrokes correctly because my cursor keeps on moving. What should I do?
Make sure that nothing accidentally touches or presses on your touchpad while you type on the keyboard. You can also disable your touchpad by pressing
. 10. My Notebook PCs touchpad is not working. What should I do?
You can try doing any of the following suggestions:
Check if ASUS Smart Gesture is set to disable touchpad by connecting an external pointing device to your Notebook PC. If yes, disable this function. Press
. 11. Instead of showing letters, pressing the U, I, and O keys on my keyboard displays numbers. How can I change this?
Press the key or
(on selected models) on your Notebook PC to turn off this feature and use the said keys for inputting letters. 12. How do I know that my system is running?
Press and hold the power button for about two (2) seconds until the power buttons LED indicator blinks five times and the camera LED indicator blinks once. 89 Notebook PC E-Manual Software FAQs 1. When I turn on my Notebook PC, the power indicator lights up but nothing appears on my screen. What can I do to fix this?
You can try doing any of the following suggestions:
Force shutdown your Notebook PC by pressing the power button for about ten (10) seconds. Check if the power adapter and battery pack are inserted correctly then turn on your Notebook PC. If the problem still exists, contact your local ASUS service center for assistance. 2. What should I do when my screen displays this message:
Remove disks or other media. Press any key to restart.?
You can try doing any of the following suggestions:
Remove all connected USB devices then restart your Notebook PC. If the problem still exists, your Notebook PC might have a memory storage problem. Contact your local ASUS service center for assistance. 3. My Notebook PC boots slower than usual and my operating system lags. How can I fix this?
Delete the applications you recently installed or were not included with your operating system package then restart your system. 90 Notebook PC E-Manual 4. My Notebook PC does not boot up. How can I fix this?
You can try doing any of the following suggestions:
Remove all connected devices to your Notebook PC then restart your system. Press F9 upon startup. When your Notebook PC enters Troubleshooting, select Refresh or Reset your PC. If the problem still exists, contact your local ASUS service center for assistance. 5. Why cant my Notebook PC wake up from sleep mode?
You need to press the power button to resume your last working state. Your system might have completely used up its battery power. Connect the power adapter to your Notebook PC and connect to a power outlet then press the power button. 91 Notebook PC E-Manual 92 Notebook PC E-Manual Appendices 93 Notebook PC E-Manual DVD-ROM Drive Information
(on selected models) The DVD-ROM drive allows you to view and create your own CDs and DVDs. You can purchase an optional DVD viewer software to view DVD titles. Regional Playback Information Playback of DVD movie titles involves decoding MPEG2 video, digital AC3 audio and decryption of CSS protected content. CSS (sometimes called copy guard) is the name given to the content protection scheme adopted by the motion picture industry to satisfy a need to protect against unlawful content duplication. Although the design rules imposed on CSS licensors are many, one rule that is most relevant is playback restrictions on regionalized content. In order to facilitate geographically staggered movie releases, DVD video titles are released for specific geographic regions as defined in Region Definitions below. Copyright laws require that all DVD movies be limited to a particular region (usually coded to the region at which it is sold). While DVD movie content may be released for multiple regions, CSS design rules require that any system capable of playing CSS encrypted content must only be capable of playing one region. IMPORTANT! The region setting may be changed up to five times using the viewer software, then it can only play DVD movies for the last region setting. Changing the region code after that will require factory resetting which is not covered by warranty. If resetting is desired, shipping and resetting costs will be at the expense of the user. 94 Notebook PC E-Manual Region Definitions Region 1 Canada, US, US Territories Region 2 Czech, Egypt, Finland, France, Germany, Gulf States, Hungary, Iceland, Iran, Iraq, Ireland, Italy, Japan, Netherlands, Norway, Poland, Portugal, Saudi Arabia, Scotland, South Africa, Spain, Sweden, Switzerland, Syria, Turkey, UK, Greece, Former Yugoslav Republics, Slovakia Region 3 Burma, Indonesia, South Korea, Malaysia, Philippines, Singapore, Taiwan, Thailand, Vietnam Region 4 Australia, Caribbean (Except US Territories), Central America, New Zealand, Pacific Islands, South America Region 5 CIS, India, Pakistan, Rest of Africa, Russia, North Korea Region 6 China 95 Notebook PC E-Manual Blu-ray ROM Drive Information
(on selected models) The Blu-ray ROM Drive allows you to view high definition (HD) videos and other disc file formats such as DVDs and CDs. Region Definitions Region A North, Central and South American countries, and their territories; Taiwan, Hong Kong, Macao, Japan, Korea (South and North), South East Asian countries and their territories. Region B European, African, and South West Asian countries and their territories; Australia and New Zealand. Region C Central, South Asian, Eastern European countries and their territories; China and Mongolia. NOTE: Refer to Blu-ray Disc website at www.blu-raydisc.com/en/Technical/FAQs/Blu-
rayDiscforVideo.aspx for more details. Internal Modem Compliancy The Notebook PC with internal modem model complies with JATE (Japan), FCC
(US, Canada, Korea, Taiwan), and CTR21. The internal modem has been approved in accordance with Council Decision 98/482/EC for pan-European single terminal connection to the public switched telephone network (PSTN). However due to differences between the individual PSTNs provided in different countries, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point. In the event of problems you should contact your equipment supplier in the first instance. 96 Notebook PC E-Manual Overview On 4th August 1998 the European Council Decision regarding the CTR 21 has been published in the Official Journal of the EC. The CTR 21 applies to all non voice terminal equipment with DTMF-dialling which is intended to be connected to the analogue PSTN (Public Switched Telephone Network). CTR 21 (Common Technical Regulation) for the attachment requirements for connection to the analogue public switched telephone networks of terminal equipment (excluding terminal equipment supporting the voice telephony justified case service) in which network addressing, if provided, is by means of dual tone multi-frequency signalling. Network Compatibility Declaration Statement to be made by the manufacturer to the Notified Body and the vendor:
This declaration will indicate the networks with which the equipment is designed to work and any notified networks with which the equipment may have inter-
working difficulties. Statement to be made by the manufacturer to the user: This declaration will indicate the networks with which the equipment is designed to work and any notified networks with which the equipment may have inter-working difficulties. The manufacturer shall also associate a statement to make it clear where network compatibility is dependent on physical and software switch settings. It will also advise the user to contact the vendor if it is desired to use the equipment on another network. Up to now the Notified Body of CETECOM issued several pan-European approvals using CTR 21. The results are Europes first modems which do not require regulatory approvals in each individual European country. Non-Voice Equipment Answering machines and loud-speaking telephones can be eligible as well as modems, fax machines, auto-dialers and alarm systems. Equipment in which the end-to-end quality of speech is controlled by regulations (e.g. handset telephones and in some countries also cordless telephones) is excluded. 97 Notebook PC E-Manual This table shows the countries currently under the CTR21 standard. Country Austria1 Belgium Czech Republic Denmark1 Finland France Germany Greece Hungary Iceland Ireland Italy Israel Lichtenstein Luxemburg The Netherlands1 Norway Poland Portugal Spain Sweden Switzerland United Kingdom More Testing No No Not Applicable Yes No No No No Not Applicable No No Still Pending No No No Yes No Not Applicable Not Applicable Not Applicable No No No Applied Yes Yes No Yes Yes Yes Yes Yes No Yes Yes Still Pending No Yes Yes Yes Yes No No No Yes Yes Yes 98 Notebook PC E-Manual This information was copied from CETECOM and is supplied without liability. For updates to this table, you may visit http://www.cetecom.de/technologies/ctr_21. html 1 National requirements will apply only if the equipment may use pulse dialling
(manufacturers may state in the user guide that the equipment is only intended to support DTMF signalling, which would make any additional testing superfluous). In The Netherlands additional testing is required for series connection and caller ID facilities. Federal Communications Commission Interference Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:
This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission
(FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. 99 Notebook PC E-Manual Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. WARNING! The use of a shielded-type power cord is required in order to meet FCC emission limits and to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used. Use only shielded cables to connect I/O devices to this equipment. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
(Reprinted from the Code of Federal Regulations #47, part 15.193, 1993. Washington DC: Office of the Federal Register, National Archives and Records Administration, U.S. Government Printing Office.) RF Exposure Information (SAR) This device meets the governments requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio ferquency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the EUT transmitting at the specified power level in different channels. The highest SAR value for device as reported to the FCC is 1.21 W/kg when placed next to the body. The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/eot/ea/fccid after searching on FCC ID:
QDS-BRCM1082. 100 Notebook PC E-Manual Declaration of Conformity (R&TTE directive 1999/5/EC) The following items were completed and are considered relevant and sufficient:
Essential requirements as in [Article 3]
Protection requirements for health and safety as in [Article 3.1a]
Testing for electric safety according to [EN 60950]
Protection requirements for electromagnetic compatibility in [Article 3.1b]
Testing for electromagnetic compatibility in [EN 301 489-1] & [EN 301 489-17]
Effective use of the radio spectrum as in [Article 3.2]
Radio test suites according to [EN 300 328-2]
CE Marking CE marking for devices without wireless LAN/Bluetooth The shipped version of this device complies with the requirements of the EEC directives 2004/108/EC Electromagnetic compatibility and 2006/95/EC Low voltage directive. CE marking for devices with wireless LAN/ Bluetooth This equipment complies with the requirements of Directive 1999/5/EC of the European Parliament and Commission from 9 March, 1999 governing Radio and Telecommunications Equipment and mutual recognition of conformity. The highest CE SAR values for the device is 0.436 W/kg. 101 Notebook PC E-Manual RF Exposure information (SAR) - CE This device meets the EU requirements (1999/519/EC) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The limits are part of extensive recommendations for the protection of the general public. These recommendations have been developed and checked by independent scientific organizations through regular and thorough evaluations of scientific studies. The unit of measurement for the European Councils recommended limit for mobile devices is the Specific Absorption Rate (SAR), and the SAR limit is 2.0 W/Kg averaged over 10 gram of body tissue. It meets the requirements of the International Commission on Non-Ionizing Radiation Protection (ICNIRP). For next-to-body operation, this device has been tested and meets the ICNRP exposure guidelines and the European Standard EN 50566 and EN 62209-2. SAR is measured with the device directly contacted to the body while transmitting at the highest certified output power level in all frequency bands of the mobile device. Radio Frequency (RF) Exposure Information The radiated output power of the Wireless Device is below the Industry Canada
(IC) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized. This device has been evaluated for and shown compliant with the IC Specific Absorption Rate (SAR) limits when operated in portable exposure conditions. Informations concernant lexposition aux frquences radio (RF) La puissance de sortie mise par lappareil de sans fil est infrieure la limite dexposition aux frquences radio dIndustry Canada (IC). Utilisez lappareil de sans fil de faon minimiser les contacts humains lors du fonctionnement normal. Ce dispositif a t valu pour et dmontr conforme la Taux IC dabsorption spcifique (SAR) des limites lorsquil est utilis dans des conditions dexposition portatifs. 102 Notebook PC E-Manual Canada, Industry Canada (IC) Notices This Class B digital apparatus complies with licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Canada, avis dIndustrie Canada (IC) Cet appareil est conforme avec Industrie Canada exemptes de licence RSS standard(s). Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas causer dinterfrence et (2) cet appareil doit accepter toute interfrence, notamment les interfrences qui peuvent affecter son fonctionnement. 5G (IC requirement) The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems; the maximum antenna gain permitted (for device in the bands 5250-5350 MHz and 5470-5725 MHz) to comply with the EIRP limit; and the maximum antenna gain permitted (for devices in the band 5275-5850 MHz) to comply with the EIRP limits specified for point-to-point and non point-to-point operation as appropriate, as stated in section A9.2(3). In addition, high-power radars are allocated as primary users (meaning they have priority) of the band 5250-5350 MHz and this radar could cause interference and/or damage to LE-LAN devices. Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systme de satellites mobiles utilisant les mme canaux ; le gain maximal dantenne permis (pour les dispositifs utilisant les bandes 5250-5350 MHz et 5470-5725 MHz) doit se conformer la limite P.I.R.E ; le gain maximal dantenne permis (pour les dispositifs utilisant les bandes 5275-5850 MHz) doit se conformer la limite P.I.R.E spcifie pour lexploitation point--point et non point--point, selon les cas, et comme spcifi dans la section A9.2(3). De plus, les radars de haute puissance sont dsigns comme utilisateurs principaux
(cest dire quils ont la priorit) pour les bandes 5250-5350 MHz, et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL 103 Notebook PC E-Manual 5G band 2 JATE IC Radiation Exposure Statement for Canada This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with IC RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during transmitting. End users must follow the specific operating instructions for satisfying RF exposure compliance. Operation is subject to the following two conditions:
This device may not cause interference and This device must accept any interference, including interference that may cause undesired operation of the device. To prevent radio interference to the licensed service (i.e. co-channel Mobile Satellite systems) this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. This device complies with Industry Canada licence-exempt RSS standard(s). CAN ICES-3(B)/NMB-3(B) 104 Notebook PC E-Manual Dclaration dIndustrie Canada relative l exposition aux ondes radio Cet appareil est conforme aux limites dexposition aux radiations dIndustrie Canada dfinies pour un environnement non-contrl. Pour maintenir la conformit avec les exigences dexposition RF dIC, veuillez viter tout contact direct avec lantenne pendant lmission. Les utilisateurs finaux doivent suivre les instructions de fonctionnement spcifiques pour satisfaire la conformit aux expositions RF. Son utilisation est sujette aux deux conditions suivantes :
Cet appareil ne peut pas causer dinterfrence, et Cet appareil doit accepter toute interfrence, y compris les interfrences qui pourraient causer un fonctionnement non souhait de lappareil. Pour viter les interfrences radio avec le service sous licence (cest -dire le partage de canal avec les systmes de tlphonie satellite), cet appareil est destin tre utilis en intrieur et loin des fentres pour fournir un blindage maximal. Tout appareil (ou son antenne dmission) qui est install en extrieur est sujet cette licence. Le present appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. CAN ICES-3(B)/NMB-3(B) 105 Notebook PC E-Manual Wireless Operation Channel for Different Domains N. America Japan 2.412-2.462 GHz 2.412-2.484 GHz Ch01 through CH11 Ch01 through Ch14 Europe ETSI 2.412-2.472 GHz Ch01 through Ch13 France Restricted Wireless Frequency Bands Some areas of France have a restricted frequency band. The worst case maximum authorized power indoors are:
10mW for the entire 2.4 GHz band (2400 MHz2483.5 MHz) 100mW for frequencies between 2446.5 MHz and 2483.5 MHz NOTE: Channels 10 through 13 inclusive operate in the band 2446.6 MHz to 2483.5 MHz. There are few possibilities for outdoor use: on private property or on the private property of public persons, use is subject to a preliminary authorization procedure by the Ministry of Defense, with maximum authorized power of 100mW in the 2446.52483.5 MHz band. Use outdoors on public property is not permitted. In the departments listed below, for the entire 2.4 GHz band:
Maximum authorized power indoors is 100mW Maximum authorized power outdoors is 10mW 106 Notebook PC E-Manual Departments in which the use of the 24002483.5 MHz band is permitted with an EIRP of less than 100mW indoors and less than 10mW outdoors:
01 Ain 02 Aisne 05 Hautes Alpes 08 Ardennes 11 Aude 24 Dordogne 32 Gers 41 Loir et Cher 55 Meuse 60 Oise 12 Aveyron 25 Doubs 36 Indre 45 Loiret 58 Nivre 61 Orne 03 Allier 09 Arige 16 Charente 26 Drme 37 Indre et Loire 50 Manche 59 Nord 63 Puy du Dme 64 Pyrnes Atlantique 66 Pyrnes Orientales 67 Bas Rhin 68 Haut Rhin 70 Haute Sane 71 Sane et Loire 75 Paris 88 Vosges 94 Val de Marne 82 Tarn et Garonne 84 Vaucluse 89 Yonne 90 Territoire de Belfort This requirement is likely to change over time, allowing you to use your wireless LAN card in more areas within France. Please check with ART for the latest information (www.arcep.fr) NOTE: Your WLAN Card transmits less than 100mW, but more than 10mW. 107 Notebook PC E-Manual UL Safety Notices Required for UL 1459 covering telecommunications (telephone) equipment intended to be electrically connected to a telecommunication network that has an operating voltage to ground that does not exceed 200V peak, 300V peak-to-peak, and 105V rms, and installed or used in accordance with the National Electrical Code (NFPA 70). When using the Notebook PC modem, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
DO NOT use the Notebook PC near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. DO NOT use the Notebook PC during an electrical storm. There may be a remote risk of electric shock from lightning. DO NOT use the Notebook PC in the vicinity of a gas leak. Required for UL 1642 covering primary (nonrechargeable) and secondary
(rechargeable) lithium batteries for use as power sources in products. These batteries contain metallic lithium, or a lithium alloy, or a lithium ion, and may consist of a single electrochemical cell or two or more cells connected in series, parallel, or both, that convert chemical energy into electrical energy by an irreversible or reversible chemical reaction. Do not dispose the Notebook PC battery pack in a fire, as they may explode. Check with local codes for possible special disposal instructions to reduce the risk of injury to persons due to fire or explosion. Do not use power adapters or batteries from other devices to reduce the risk of injury to persons due to fire or explosion. Use only UL certified power adapters or batteries supplied by the manufacturer or authorized retailers. 108 Notebook PC E-Manual Power Safety Requirement Products with electrical current ratings up to 6A and weighing more than 3Kg must use approved power cords greater than or equal to: H05VV-F, 3G, 0.75mm2 or H05VV-F, 2G, 0.75mm2. TV Notices Note to CATV System InstallerCable distribution system should be grounded
(earthed) in accordance with ANSI/NFPA 70, the National Electrical Code (NEC), in particular Section 820.93, Grounding of Outer Conductive Shield of a Coaxial Cable installation should include bonding the screen of the coaxial cable to the earth at the building entrance. REACH Complying with the REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals) regulatory framework, we publish the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/
REACH.htm. Macrovision Corporation Product Notice This product incorporates copyright protection technology that is protected by method claims of certain U.S.A. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Prevention of Hearing Loss To prevent possible hearing damage, do not listen at high volume levels for long periods. 109 Notebook PC E-Manual Nordic Lithium Cautions (for lithium-ion batteries) CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturers instructions. (English) ATTENZIONE! Rischio di esplosione della batteria se sostituita in modo errato. Sostituire la batteria con un una di tipo uguale o equivalente consigliata dalla fabbrica. Non disperdere le batterie nellambiente. (Italian) VORSICHT! Explosionsgefahr bei unsachgemen Austausch der Batterie. Ersatz nur durch denselben oder einem vom Hersteller empfohlenem hnlichen Typ. Entsorgung gebrauchter Batterien nach Angaben des Herstellers. (German) ADVARSELI! Lithiumbatteri - Eksplosionsfare ved fejlagtig hndtering. Udskiftning m kun ske med batteri af samme fabrikat og type. Levr det brugte batteri tilbage til leverandren. (Danish) VARNING! Explosionsfara vid felaktigt batteribyte. Anvnd samma batterityp eller en ekvivalent typ som rekommenderas av apparattillverkaren. Kassera anvnt batteri enligt fabrikantens instruktion. (Swedish) VAROITUS! Paristo voi rjht, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan laitevalmistajan sousittelemaan tyyppiin. Hvit kytetty paristo valmistagan ohjeiden mukaisesti. (Finnish) ATTENTION! Il y a danger dexplosion sil y a remplacement incorrect de la batterie. Remplacer uniquement avec une batterie du mre type ou dun type quivalent recommand par le constructeur. Mettre au rebut les batteries usages conformment aux instructions du fabricant. (French) ADVARSEL! Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme batteritype eller en tilsvarende type anbefalt av apparatfabrikanten. Brukte batterier kasseres i henhold til fabrikantens instruksjoner. (Norwegian)
(Japanese)
!
. (Russian) 110 Notebook PC E-Manual Optical Drive Safety Information Laser Safety Information CD-ROM Drive Safety Warning CLASS 1 LASER PRODUCT WARNING! To prevent exposure to the optical drives laser, do not attempt to disassemble or repair the optical drive by yourself. For your safety, contact a professional technician for assistance. Service warning label WARNING! INVISIBLE LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. CDRH Regulations The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration implemented regulations for laser products on August 2, 1976. These regulations apply to laser products manufactured from August 1, 1976. Compliance is mandatory for products marketed in the United States. WARNING! Use of controls or adjustments or performance of procedures other than those specified herein or in the laser product installation guide may result in hazardous radiation exposure. Coating Notice IMPORTANT! To provide electrical insulation and maintain electrical safety, a coating is applied to insulate the device except on the areas where the I/O ports are located. 111 Notebook PC E-Manual CTR 21 Approval (for Notebook PC with built-in Modem) Danish Dutch English Finnish French 112 Notebook PC E-Manual German Greek Italian Portuguese Spanish Swedish 113 Notebook PC E-Manual ENERGY STAR complied product ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices. All ASUS products with the ENERGY STAR logo comply with the ENERGY STAR standard, and the power management feature is enabled by default. The monitor and computer are automatically set to sleep after 10 and 30 minutes of user inactivity. To wake your computer, click the mouse or press any key on the keyboard. Please visit http://www.energy.gov/powermanagement for detail information on power management and its benefits to the environment. In addition, please visit http://www.energystar.gov for detail information on the ENERGY STAR joint program. NOTE: Energy Star is NOT supported on FreeDOS and Linux-based operating systems. European Union Eco-label This Notebook PC has been awarded the EU Flower label, which means that this product has the following characteristics:
1. 2. 3. 4. 5. Decreased energy consumption during use and stand-by modes. Limited use of toxic heavy metals. Limited use of substances harmful to the environment and health. Reduction of the use of natural resources by encouraging recycling. Designed for easy upgrades and longer lifetime through providing compatible spare parts such as batteries, power supplies, the keyboard, the memory, and if available the CD drive or DVD drive. Reduced solid waste through takeback policy. 6. For more information on the EU Flower label, please visit the European Union Eco-
label website at http://www.ecolabel.eu. 114 Notebook PC E-Manual Global Environmental Regulation Compliance and Declaration ASUS follows the green design concept to design and manufacture our products, and makes sure that each stage of the product life cycle of ASUS product is in line with global environmental regulations. In addition, ASUS disclose the relevant information based on regulation requirements. Please refer to http://csr.asus.com/english/Compliance.htm for information disclosure based on regulation requirements ASUS is complied with:
Japan JIS-C-0950 Material Declarations EU REACH SVHC Korea RoHS Swiss Energy Laws ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.com/
english/Takeback.htm for detailed recycling information in different regions. Rechargeable Battery Recycling Service in North America For US and Canada customers, you can call 1-800-822-8837
(toll-free) for recycling information of your ASUS products rechargeable batteries. 115 Notebook PC E-Manual Regional notice for Singapore This ASUS product complies with IDA Standards. Complies with IDA Standards DB103778 Regional notice for India This product complies with the India E-waste (Management and Handling)Rule 2011 and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls(PBBs) and polybrominated diphenyl ethers (PBDEs) in concentrations exceeding 0.1 % by weight in homogenous materials and 0.01 % by weight in homogenous materials for cadmium, except for the exemptions listed in Schedule-II of the Rule. Notices for removeable batteries Risk of explosion if battery is replaced by an incorrect type. The battery and its component must be recycled or disposed of properly. Avis concernant les batteries remplaables La batterie de lordinateur portable peut prsenter un risque dincendie ou de brlure si celle-ci est retire ou dsassemble. La batterie et ses composants doivent tre recycls de faon approprie. 116 Notebook PC E-Manual 117 Notebook PC E-Manual EC Declaration of Conformity We, the undersigned, Manufacturer:
Address:
Authorized representative in Europe:
Address, City:
Country:
declare the following apparatus:
Product name :
Model name :
ASUSTeK COMPUTER INC. 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN ASUS COMPUTER GmbH HARKORT STR. 21-23, 40880 RATINGEN GERMANY Notebook NX500J,GX500J conform with the essential requirements of the following directives:
2004/108/EC-EMC Directive EN 55022:2010+AC:2011 EN 61000-3-2:2006+A2:2009 EN 55013:2001+A1:2003+A2:2006 1999/5/EC-R&TTE Directive EN 300 328 V1.7.1(2006-10) EN 300 440-1 V1.6.1(2010-08) EN 300 440-2 V1.4.1(2010-08) EN 301 511 V9.0.2(2003-03) EN 301 908-1 V5.2.1(2011-05) EN 301 908-2 V5.2.1(2011-07) EN 301 893 V1.6.1(2011-11) EN 302 544-2 V1.1.1(2009-01) EN 302 623 V1.1.1(2009-01) EN 50360:2001 EN 62479:2010 EN 50385:2002 EN 62311:2008 2006/95/EC-LVD Directive EN 60950-1 / A12:2011 2009/125/EC-ErP Directive EN 55024:2010 EN 61000-3-3:2008 EN 55020:2007+A11:2011 EN 301 489-1 V1.9.2(2011-09) EN 301 489-3 V1.4.1(2002-08) EN 301 489-4 V1.4.1(2009-05) EN 301 489-7 V1.3.1(2005-11) EN 301 489-9 V1.4.1(2007-11) EN 301 489-17 V2.2.1(2012-09) EN 301 489-24 V1.5.1(2010-09) EN 302 326-2 V1.2.2(2007-06) EN 302 326-3 V1.3.1(2007-09) EN 301 357-2 V1.4.1(2008-11) EN 302 291-1 V1.1.1(2005-07) EN 302 291-2 V1.1.1(2005-07) EN 60065:2002 / A12:2011 Regulation (EC) No. 1275/2008 Regulation (EC) No. 278/2009 Regulation (EC) No. 642/2009 Regulation (EC) No. 617/2013 2011/65/EU-RoHS Directive Ver. 140331 CE marking
(EC conformity marking) Position : CEO Name : Jerry Shen Declaration Date: 23/06/2014 Year to begin affixing CE marking: 2014 Signature : __________ 118 Notebook PC E-Manual
various | User Manual OEM | Users Manual | 332.93 KiB | / November 11 2014 |
OEM Installation Guidance Document For Broadcom BCM94360HMB FCC ID: QDS-BRCM1082; IC: 4324A-BRCM1082 Conditions on using BRCM regulatory approvals:
Customer must ensure that its product (the CUSTOMER Product) is electrically OEM must inform Broadcom of any changes which may require the Class I or A. identical to Broadcoms product. Customer acknowledges that any modifications to Broadcoms product may invalidate regulatory approvals in relation to the CUSTOMER Product, or may necessitate notifications to the relevant regulatory authorities. B. Class II permissive changes for the FCC. Any substituted antenna and RF cable assemblies must be approved by Broadcom in order to maintain compliance. C. applicable regulations in all respects. D. product that contains the text as required by applicable law. Without limitation of the foregoing, an example (for illustration purposes only) of possible text to include is set forth below:
1. USAFederal Communications Commission (FCC) A users manual or instruction manual must be included with the customer Appropriate labels must be affixed to the CUSTOMER Product that comply with FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. INFORMATION TO USER:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Increase the distance between the equipment and the receiver.
-Connect the equipment to outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. Page 1 of 9 OEM Installation Guidance Document For Broadcom BCM94360HMB FCC ID: QDS-BRCM1082; IC: 4324A-BRCM1082 Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. CAUTION: (this only applicable to 5GHz device) This device is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range. FCC requires this product to be used indoors for frequency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device. System integrators must include the FCC ID on the end product. FCC Radio-Frequency Exposure & Approval Conditions:
1. Antennas must be installed in the display section of Netbook/notebook/laptop computer to provide at least 20cm separation distance from the transmitting antenna to the body of user during normal operating condition. When the 20cm separation distance requirement cannot be met, please check with Broadcom before using the Broadcom FCC ID. 2. Transmitting antenna(s) can only be installed at the display section of computer. When this device is installed other than notebook computers, at least 20 cm separation distance shall be maintained between the transmitting antenna(s) to the body of user or nearby person. 3. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. 4. Only those antennas with same type and lesser gain filed under this FCC ID number can be used with this device. 5. The regulatory label on the final system must include the statement: Contains FCC ID: QDS-BRCM1082 and ID: 4324A-BRCM1082 or using electronic labeling method as documented in KDB 784748. 6. The final system integrator must ensure there is no instruction provided in the user manual or customer documentation indicating how to install or remove the transmitter module except such device has implemented two-ways authentication between module and the host system. 7. The final host manual shall include the following regulatory statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment Page 2 of 9 OEM Installation Guidance Document For Broadcom BCM94360HMB FCC ID: QDS-BRCM1082; IC: 4324A-BRCM1082 generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Increase the distance between the equipment and the receiver.
-Connect the equipment to outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2. Canada - Industry Canada (IC) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This radio transmitter, IC ID: 4324A-BRCM1082, has been approved by Industry Canada to operate with the onboard antenna or a detachable WLAN antenna with a maximum gain of 3.9dB/2.4GHz and 5.8dBi/5GHz. Any other detachable antennas, with a different type or having a gain greater than 3.9dB/2.4GHz and 5.8dBi/5GHz are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. Caution: (this only applicable to UNII device)
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit; and Page 3 of 9 OEM Installation Guidance Document For Broadcom BCM94360HMB FCC ID: QDS-BRCM1082; IC: 4324A-BRCM1082
(iii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device. Caution: Exposure to Radio Frequency Radiation. To comply with RSS 102 RF exposure compliance requirements, for mobile configurations, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter. System integrators must include a label with Contains IC: 4324A-BRCM1082 on the end product. Industry Canada user statements should be provided in both English and French, at the time each product is offered for sale or lease in Canada. French:
Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s) l'opration est soumise aux deux conditions suivantes: . ( 1) ce dispositif ne doit pas causer d'interfrences et ( 2) cet appareil doit accepter toute interfrence , y compris les interfrences qui peuvent provoquer un mauvais fonctionnement de l'appareil. Conformment la rglementation d'Industrie Canada, cet metteur radio ne peut fonctionner l'aide d'une antenne d'un type et maximum ( ou moins ) Gain approuv pour l'metteur par Industrie Canada. Afin de rduire le risque d'interfrence avec d'autres utilisateurs, le type d'antenne et son gain doivent tre choisi que la puissance isotrope rayonne quivalente (PIRE ) ne dpasse pas ce qui est ncessaire pour une communication russie . Cet metteur radio , IC ID: 4324A BRCM1082 , a t approuv par Industrie Canada pour fonctionner avec l'antenne intgre ou une antenne WLAN amovible avec un gain maximum de 3.9dB/2.4GHz et 5.8dBi/5GHz Les autres antennes dtachables, avec . un type diffrent ou d'avoir un gain suprieur 3.9dB/2.4GHz et 5.8dBi/5GHz sont strictement interdits pour une utilisation avec cet appareil. L'impdance d'antenne requise est de 50 ohms. Attention: (ceci ne s'applique un appareil UNII )
(I) l'appareil pour fonctionner dans la bande 5150-5250 MHz est rserv une utilisation en intrieur afin de rduire les risques d'interfrence nuisible aux systmes mobiles par satellite co- canal;
(ii) le gain d'antenne maximal autoris pour les dispositifs dans les bandes 5250-5350 MHz et 5470-5725 MHz doivent respecter la limite de pire , et
( iii) le gain d'antenne maximal autoris pour les dispositifs fonctionnant dans la bande 5725-5825 MHz doivent respecter les limites de pire spcifies pour le point --point et Page 4 of 9 OEM Installation Guidance Document For Broadcom BCM94360HMB FCC ID: QDS-BRCM1082; IC: 4324A-BRCM1082 l'exploitation non point point , le cas chant . Les radars haute puissance sont dsigns comme utilisateurs principaux de 5,25 5,35 GHz et 5,65 5,85 GHz . Ces stations radars peuvent causer des interfrences et / ou endommager cet appareil . Attention: Exposition aux radiations de frquences radio. Pour se conformer aux normes RSS 102 exigences de conformit d'exposition aux radiofrquences , pour les configurations mobiles , une distance de sparation d'au moins 20 cm doit tre maintenue entre l' antenne de cet appareil et toutes les personnes . Cet appareil ne doit pas tre co- localises ou oprant en conjonction avec une autre antenne ou transmetteur . Les intgrateurs de systmes doivent comporter une tiquette avec Contient IC: 4324A BRCM1082 " . Sur le produit final comptes d'utilisateur d'Industrie Canada devraient tre fournis en anglais et en franais , au moment o chaque produit est offert la vente ou la location au Canada. 3. Europe - EU Restrictions This equipment needs to be marked with the throughout the European community. XXXX symbol and can be used Marking by the symbol indicates that usage restrictions apply. Information to be supplied to the users:
802.11a Restrictions:
- This product is for indoor use only when using channels 36, 40, 44, 48, 52, 56, 60, or 64 (5150 5350 MHz).
- DFS and TPC must remain enabled to ensure product compliance with EC regulations.
- To ensure compliance with local regulations, be sure to select the country in which the access point is installed.
- This product can be used as shown in the table below:
5 GHz wireless LAN Indoor Use IEEE 802.11a Only A, AND, B, CH, D, CY, CZ, DK, ES, EST, F, FIN, FL, FR, GB, GR, H, I, IRL, IS, L, LT, M, Page 5 of 9 OEM Installation Guidance Document For Broadcom BCM94360HMB FCC ID: QDS-BRCM1082; IC: 4324A-BRCM1082 MC, N, NL, P, PL, RSM, S, SK, SLO, V Caution: Exposure to Radio Frequency Radiation. To comply with RF exposure compliance requirements, for mobile configurations, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. Czech:
User's Manual in Czech language and a statement of conformity with Directive 1999/5/EC in Czech language must be enclosed to each product. Italy:
For private use, a general authorisation is required if WAS/RLANs are used outside own premises. For public use, a general authorisation is required Note for system integrators:
- The module is tested to comply with the requirement of the R&TTE Directive. System integrators are responsible for compliance of the final device with the R&TTE Directive.
- Packaging: CE Marking must also be on the outer packaging of the product. The outer packaging must also provide an indication as to where the device is intended to be used and OR conversely, where there may be restrictions for use. 4. Taiwan - NCC Statement to be included in the user guide Statement- For general products Additional Statement - For 5G Band products 5.25G ~5.35G Translation:
Article 12 Page 6 of 9 OEM Installation Guidance Document For Broadcom BCM94360HMB FCC ID: QDS-BRCM1082; IC: 4324A-BRCM1082 Without permission, any company, firm or user shall not alter the frequency, increase the power, or change the characteristics and functions of the original design of the certified lower power frequency electric machinery. Article 14 The application of low power frequency electric machineries shall not affect the navigation safety nor interfere a legal communication, if an interference is found, the service will be suspended until improvement is made and the interference no longer exists. The foregoing legal communication refers to the wireless telecommunication operated according to the telecommunications laws and regulations. The low power frequency electric machinery should be able to tolerate the interference of the electric wave radiation electric machineries and equipments for legal communications or industrial and scientific applications. Radio devices using 5.25-5.35GHz bands are restricted to indoor use only. Appendix:
(ID):
CCXXxxLPyyyZz
,, CCXXxxLPyyyZz . 5. Korea Include the following statement either on the label or in the User Guide.
"
"
6. Argentina The current approval is in the name of Broadcoms local representative. It may be necessary to obtain regulatory approval in the name of the local distributor or importer. We suggest manufacturers check with their local distributors and importers in Argentina. 7. Brazil - Anatel Page 7 of 9 OEM Installation Guidance Document For Broadcom BCM94360HMB FCC ID: QDS-BRCM1082; IC: 4324A-BRCM1082 Before using Broadcom Anatel approvals, 1. PC- OEM must make arrangement for its local offices or distributors to provide maintenance, technical assistance or replace any faulty products sold in Brazil. 2. All warranty services will be provided by the distributors or PC-OEM sales support in Brazil. An official agreement stating warranty responsibilities must be signed and made available to Broadcom. Interference statement to be included in the Users Guide
"Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio."
Translation:
"This equipment operates in secondary character. It can be affected by harmful interference. However, it cannot cause interference to systems operating in primary character."
8. South Africa ICASA PC-OEMs must make arrangement for importers to supply spare parts and carry out repairs in South Africa. 9. Indonesia POSTEL, Kenya CCK, Nepal - NTA PC-OEMs must make arrangement for importers to provide product warranty and after sales services. 10. Japan MIC Radio devices using 5.15-5.35GHz bands are restricted to indoor use only. 11. Mexico PC-OEMs must make arrangement for importers to provide User Manual in Spanish in Mexico. The User Manual must feature the following mandatory statement:
La operacin de este equipo est sujeta a las siguientes dos condiciones:
(1) es posible que este equipo o dispositivo no cause interferencia prejudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. Translation:
The operation of this device is subject to the following two conditions:
(1) this equipment or device must not cause harmful interference and Page 8 of 9 OEM Installation Guidance Document For Broadcom BCM94360HMB FCC ID: QDS-BRCM1082; IC: 4324A-BRCM1082
(2) this equipment or device must accept any interference, including interference which could otherwise cause its undesired operation. 12. CB Certifications PC-OEMs must provide User Guides in the language suitable for the countries when shipping products to countries listed in the CB reports. 13. Moldova- Labeling to be included Proper Marking must be included on each certified unit shipping into Moldova. 14. Tunisia When shipping into Tunisia, only 5150-5350MHz is allowed for the 5GHz WLAN. Passive Scan on other 5GHz channels is prohibited. Page 9 of 9
various | User Manual Regulatory | Users Manual | 641.40 KiB | / November 11 2014 |
Introduction: Broadcom BCM94360HMB PCI-E Mini Card User's Guide Before you begin Things you should know BCM94360HMB network Before you begin Obtain the following information from your network administrator (if you are a home user, obtain this information from the person that installed your wireless access point):
l Network names (SSID) of the specific wireless networks that you want to connect to. l WEP (Wired Equivalent Privacy) key information (if any) for the networks you want to connect to. l For Microsoft Windows networking, your customer name and workgroup name. l For your network account, your user name and password. l Your IP address (if not using a DHCP server) Things you should know When you start your computer, your Broadcom BCM94360HMB PCI-E Mini card detects certain wireless networks that are within range. Before you can connect to these and other wireless networks, you must configure a profile for each network using the information you obtained from your network administrator. WEP is a security protocol for wireless local area networks (defined in the IEEE 802.11g standard) that encrypts data sent over radio waves. The use of the WEP key is optional and can be enabled or disabled. If the network you are connecting to has enabled WEP, you must also enable WEP in the network profile and set the WEP key to match the WEP key used by the network. Otherwise, you cannot connect to the network. Broadcom BCM94360HMB network The Broadcom BCM94360HMB solution allows you to make a wireless connection to a network, as illustrated below. Back to top Using the Broadcom Wireless Utility: Broadcom AirForce 54g and Intensi-fi Wireless Network Adapter User Guide Back to Contents Page Using the Broadcom Wireless Utility: Broadcom AirForce 54g and Intensi-fi Wireless Network Adapter User Guide Overview Utility Components Overview The Broadcom Wireless Utility enables you to do the following network tasks:
l Manage your wireless networks and create network connection profiles (Wireless Networks tab) l Connect to available networks (utility icon in notification area) l Get information about the network status and signal and noise of your network connection (Link Status tab) l View current and accumulated statistics (Statistics tab) l Find out which broadcasting networks are in range and search for nonbroadcasting networks (Site Monitor tab) l Run tests on the wireless network adapter (Diagnostics tab) l Get date and version information about the utility, and software, hardware, and location details about your wireless network adapter (Information tab) l Manually add or delete trusted servers and enable the manual acceptance or rejection of auto-
provisioning and A-ID group changes (Wireless Networks tab) l Manually import EAP-FAST PACs (Wireless Networks tab) In the utility, you can open Wireless Network Wizard to connect to a basic network or create an ad hoc network, or you can open the Wireless Network Connection Settings tool to connect to an advanced network. To do any of the other tasks, click the tab that is associated with the described task. To start using the utility, right-click the utility icon If the icon is not available, open Broadcom Wireless Utility in Control Panel. in the notification area, and then click Open Utility. NOTE: The utility icon may not appear exactly as shown here. See "Table 1. Signal Strength Indicated by the Broadcom Wireless Utility Icon."
Utility Components Utility components include the utility icon in the notification area, the six utility tabs, and Wireless Network Connection Settings. Using the Broadcom Wireless Utility: Broadcom AirForce 54g and Intensi-fi Wireless Network Adapter User Guide Utility Icon To do any of the following tasks or operations, right-click the utility icon, and then click the appropriate item. l Open the on-line Broadcom AirForce 54g and Intensi-fi Wireless Network Adapter User Guide
(Help Files) l Open About WLAN Card Utility to view links to Broadcom and Broadcom Customer Support websites and to view the version and date of the utility (About) l Hide the utility icon (Hide Tray Icon) l Disable or enable the radio (Disable/Enable Radio) l Connect to any of the networks for which you have created a connection profile and are within range (Connect To) l Open the utility to the Wireless Networks tab (Open Utility) l Open the utility to the Link Status tab to view information about the connection (Status) l Display a log of your wireless network events (Display Log) Wireless Networks Tab The Wireless Networks tab has tools that enable you to do the following:
l Use the utility to manage your wireless networks l Add a network connection profile l Edit or remove a network connection profile l Change the order in which profiles are listed under Preferred network connections l Connect to any listed network without changing its order in the list l Disable or enable the radio (Disable/Enable Radio) l Show or hide the utility icon in the notification area l Choose which type of network to access l Lock or unlock a preferred network connection profile l Save your wireless network connection profiles as a WPN file l Import a WPN file l Manually add or delete trusted servers and enable the manual acceptance or rejection of auto-
provisioning and A-ID group changes l Manually import EAP-FAST PACS On the Add menu, you can use either the wireless network wizard that is available from Broadcom Wireless Utility (see Connecting to a Basic Network or Creating an Ad Hoc Network Using the Wireless Network Wizard") or the utility (see "Connecting to an Advanced Network Using the Broadcom Wireless Utility") to add a network connection profile. To use the utility to manage your wireless networks, select the Let this tool manage your wireless networks check box. To add a network connection profile, click the Add arrow, and then click either Use Wizard (basic network) or Use Utility (advanced network). To edit or remove a network connection profile, right-click the network name, and then click either Edit or Remove. To change the order in which profiles are listed under Preferred network connections, click the network name, and then click either the up arrow or down arrow. To connect to any listed network without changing its order in the list, right-click the network name, and then click Connect. Using the Broadcom Wireless Utility: Broadcom AirForce 54g and Intensi-fi Wireless Network Adapter User Guide To disable the radio, clear the Enable radio check box. To enable the radio, select the Enable radio check box. To hide the utility icon utility icon check box.
, clear the Show utility icon check box. To show the icon, select the Show To choose the type of network to access, click the Options arrow, and then click Advanced. To lock or unlock a preferred network connection profile, right-click anywhere in the row that lists the network name, and then click Lock or Unlock, as appropriate. NOTE: You must have system or administrator rights to be able to lock or unlock a profile. To save your wireless network connection profiles to a WPN file, click the Options arrow, and then click Export (see "Saving Preferred Network Connection Settings to a File" in "Connecting to an Advanced Network Using the Broadcom Wireless Utility."
To import a WPN file, click the Options arrow, and then click Import (see "Importing a Preferred Network Connection Profiles File" in "Connecting to an Advanced Network Using the Broadcom Wireless Utility."
Click Apply or OK after you change any of the settings for the change to take effect. Using the Broadcom Wireless Utility: Broadcom AirForce 54g and Intensi-fi Wireless Network Adapter User Guide For networks that use the EAP-FAST authentication method, the Wireless WLAN Card Utility automatically adds trusted servers to the trust list and accepts auto-provisioning and AID (A-ID) group changes by default. The utility also enables you to import a Protected Access Credential (PAC). From the utility, you can also manually add or delete trusted servers, enable the manual acceptance or rejection of auto-
provisioning and A-ID group changes, or import or delete PACS, as described in the following instructions. In general, you should use the default settings. Therefore, check with the network administrator before you make any changes. To manually add a trusted server to the trust list 1. Open Broadcom Wireless Utility. 2. From the Wireless Networks tab, click Options, point to Cisco Compatible Extensions, and then click Administrator Settings. 3. Click Add. 4. Type the A-ID friendly name of the trusted server in the space provided, and then click OK. To delete a trusted server from the trust list Using the Broadcom Wireless Utility: Broadcom AirForce 54g and Intensi-fi Wireless Network Adapter User Guide 1. Open Broadcom Wireless Utility. 2. From the Wireless Networks tab, click Options, point to Cisco Compatible Extensions, and then click Administrator Settings. 3. In the Trust list (A-ID), click the name of the trusted server you want to delete, and then click Delete. To change the default settings for administering Cisco Compatible Extensions 1. Open Broadcom Wireless Utility. 2. From the Wireless Networks tab, click Options, point to Cisco Compatible Extensions, and then click Administrator Settings. 3. Clear the Disable auto-provision prompt check box to enable manual acceptance or rejection. 4. Clear the Disable A-ID group change prompt check box to enable manual acceptance or 5. Select the Auto-provision PAC only once check box to auto-provision a Protected Access rejection. Credential (PAC) only once. To import or remove an EAP-FAST PAC 1. Open Broadcom Wireless Utility. 2. From the Wireless Networks tab, click Options, point to Cisco Compatible Extensions, and 3. To import a PAC: in Protected Access Credentials, click Add, and then follow the on-screen then click Manage PACs. instructions. NOTE: The PAC is password protected, so you must know the password to be able to import the PAC.
-or-
To remove a PAC: click anywhere in the row that lists the PAC, and then click Remove. Link Status Network status and signal and noise information about your network connection is displayed on the Link Status tab. NOTES:
l For IEEE 802.11n connections, speed is indicated by an MCS value. l Radio Stream information is provided only for IEEE 802.11n connections. l Click anywhere in the Signal & noise history box to change the type of history being displayed. Successive clicks change the type from both signal and noise, to noise only, to signal only, and back to both signal and noise. Using the Broadcom Wireless Utility: Broadcom AirForce 54g and Intensi-fi Wireless Network Adapter User Guide The status of your network connection is also indicated by the appearance of the utility icon number and color of the radio waves indicates the strength or weakness of the signal (see Table 1. Signal Strength Indicated by the Broadcom Wireless Utility Icon for details). The To view the network name (SSID), speed, signal strength rating, connection status, and the client IP address of the network connection, move your mouse pointer over the utility icon. NOTE: On computers running Windows XP, you also can view the SSID, speed, signal strength rating, and connection status by moving your mouse pointer over the Windows Wireless Network Connection icon in the notification area. Table 1. Signal Strength Indicated by the Broadcom Wireless Utility Icon Using the Broadcom Wireless Utility: Broadcom AirForce 54g and Intensi-fi Wireless Network Adapter User Guide Icon Appearance Indicated Received Signal Strength The signal strength is very good or excellent. The signal strength is weak. See Troubleshooting for suggested action. No signal is being received. See Troubleshooting for probable causes and suggested action. The radio is disabled or switched off. See Troubleshooting for suggested action. Statistics On the Statistics tab under Current, the following current statistics are shown:
l Network name (SSID) l Connection time l Packets sent l Packets received l Sent packets lost l Received packets lost l Total packets lost (%) Under Accumulated, the following accumulated statistics are shown:
l Packets sent l Packets received l Sent packets lost l Received packets lost Using the Broadcom Wireless Utility: Broadcom AirForce 54g and Intensi-fi Wireless Network Adapter User Guide Site Monitor Basic Site Monitor On the Site Monitor tab, the basic Site Monitor displays information about wireless routers/APs and ad hoc networks that are within range. To sort the list, click the column heading that shows the characteristic you want to sort by. For example, to sort by signal strength, click Signal . To view information about a particular wireless router/AP or ad hoc network, click anywhere in the row that lists the wireless router/AP or ad hoc network. The network information is shown under Selected Network. To view or change the network connection settings for a particular wireless router/AP or ad hoc network, right-click anywhere in the row that lists the wireless router/AP or ad hoc network, and then click Editif you have not yet created a network connection profile for that particular wireless router/AP or ad hoc network and want to do so, click Add . To see the information elements for a listed AP or ad hoc network, right-click anywhere in the row that lists the AP or ad hoc network, and then click Show Information Elements. Using the Broadcom Wireless Utility: Broadcom AirForce 54g and Intensi-fi Wireless Network Adapter User Guide NOTES:
l Nonbroadcasting networks are labeled (nonbroadcasting) under Network Name. l The network performance may be degraded while Site Monitor is displaying nonbroadcasting APs to which you are not currently connected. l The symbols under AP Band indicate IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, or IEEE 802.11n operation. To see more detailed information about a particular wireless router/AP or ad hoc network, click anywhere in the row that lists the wireless router/AP or ad hoc network, and then click Advanced. Advanced Site Monitor To save the activity log to a file, click the Options arrow, and then click Start Log. Using the Broadcom Wireless Utility: Broadcom AirForce 54g and Intensi-fi Wireless Network Adapter User Guide You can adjust the time interval between scans by clicking the Options arrow, and then clicking either one of the preset values or clicking Customize to specify a different time interval. NOTE: The network performance may be degraded while Site Monitor is displaying nonbroadcasting networks to which you are not currently connected. To view detailed network information for a single nonbroadcasting network, type the network name in the Look for box, and then click Find. To reset the site monitor to the broadcasting networks, click Clear. Diagnostics On the Diagnostics tab, you can run a number of tests to determine if your wireless network adapter is functioning properly. Select the tests you want to run, and then click Run. For information about an individual test, look under Information before you click Run. To see the test results, look under Information after you click Run. NOTE: The network connection is lost when you run the tests. When the test run is over, your network connection is automatically reestablished. Also, you can view a log of your wireless network events. To do so, click Log. Examples of wireless network events that are logged include:
Using the Broadcom Wireless Utility: Broadcom AirForce 54g and Intensi-fi Wireless Network Adapter User Guide l Initiation of user session l Connecting to a network l Disconnecting from current network l Authentication mode being used l Driver status l Supplicant status l New wireless device available l Initializing wireless state machine l Wireless utility is managing this adapter l Wireless utility is not managing this adapter If your Broadcom 802.11 Network Adapter fails any of the diagnostics tests, go to http://www.broadcom. com/ for technical support. Using the Broadcom BT Utility: Quick Start Guide Step 1: Installing the Software 1. If the Main Menu screen appears automatically, select Install software and click OK. If the Main Menu screen does not appear automatically, click Start, click Run, type x:\setup.exe (where x is the CD-ROM or DVD drive letter of your computer), and click OK. 2. Click Next, click Finish, and then restart your computer. 3. Right-click the Bluetooth icon in the taskbar notification area (system tray) and click Start Using Bluetooth. Follow the instructions provided by the Initial Bluetooth Configuration Wizard. Glossary Authentication A Bluetooth security feature that is used to verify identity; it requires a Bluetooth PIN Code from the remote device. Authorization A Yes-or-No Bluetooth security feature that requires operator intervention to avoid having the connection time out and fail. Bluetooth device Bluetooth enabled hardware such as a computer, printer, fax, mouse, keyboard, cell phone, headset, or PDA. Regulatory Statements for BCM94360HMB Please refer to Broadcom OEM installation guide separation distance o
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2016-02-10 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | Class II permissive change or modification of presently authorized equipment |
2 | 2014-10-16 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
3 | 5775 ~ 5775 | DTS - Digital Transmission System | ||
4 | 5530 ~ 5690 | NII - Unlicensed National Information Infrastructure TX | ||
5 | 2014-10-02 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
6 | 5530 ~ 5690 | NII - Unlicensed National Information Infrastructure TX | ||
7 | JBP - Part 15 Class B Computing Device Peripheral | |||
8 | 5775 ~ 5775 | DTS - Digital Transmission System | ||
9 | 2014-06-17 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
10 | 5530 ~ 5690 | NII - Unlicensed National Information Infrastructure TX | ||
11 | JBP - Part 15 Class B Computing Device Peripheral | |||
12 | 2014-06-16 | 5775 ~ 5775 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
various | Effective |
2016-02-10
|
||||
various |
2014-10-16
|
|||||
various |
2014-10-02
|
|||||
various |
2014-06-17
|
|||||
various |
2014-06-16
|
|||||
various | Applicant's complete, legal business name |
Broadcom Corporation
|
||||
various | FCC Registration Number (FRN) |
0007091952
|
||||
various | Physical Address |
270 Innovation Drive
|
||||
various |
San Jose, California 95134
|
|||||
various |
United States
|
|||||
app s | TCB Information | |||||
various | TCB Application Email Address |
L******@ul.com
|
||||
various |
L******@ul.com
|
|||||
various | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
various |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
app s | FCC ID | |||||
various | Grantee Code |
QDS
|
||||
various | Equipment Product Code |
BRCM1082
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
various | Name |
A**** L********
|
||||
various | Title |
Manager, Compliance Engineering
|
||||
various | Telephone Number |
40892********
|
||||
various | Fax Number |
408-5********
|
||||
various |
a******@broadcom.com
|
|||||
app s | Technical Contact | |||||
various | Firm Name |
Sporton International Inc.
|
||||
various | Name |
V****** H****
|
||||
various | Physical Address |
No.8, Lane 724, Bo-ai St., Jhubei City, Hsinchu Co
|
||||
various |
Hsinchu, 302
|
|||||
various |
Taiwan
|
|||||
various | Telephone Number |
886-3********
|
||||
various | Fax Number |
886-3********
|
||||
various |
v******@sporton.com.tw
|
|||||
app s | Non Technical Contact | |||||
various | Firm Name |
Sporton International Inc.
|
||||
various | Name |
V******** H******
|
||||
various | Physical Address |
No.8, Lane 724, Bo-ai St., Jhubei City, Hsinchu Co
|
||||
various |
Hsinchu, 302
|
|||||
various |
Taiwan
|
|||||
various | Telephone Number |
886-3********
|
||||
various | Fax Number |
886-3********
|
||||
various |
v******@sporton.com.tw
|
|||||
app s | Confidentiality (long or short term) | |||||
various | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
various | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
various | Yes | |||||
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 04/14/2015 | ||||
various | 04/01/2015 | |||||
various | 11/11/2014 | |||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
various | Is this application for software defined/cognitive radio authorization? | No | ||||
various | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
various | DSS - Part 15 Spread Spectrum Transmitter | |||||
various | DTS - Digital Transmission System | |||||
various | JBP - Part 15 Class B Computing Device Peripheral | |||||
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 802.11a/b/g/n/ac WLAN+Bluetooth PCI-E Mini Card | ||||
various | 802.11abgn/11ac WLAN + Bluetooth PCI-E Mini Card | |||||
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
various | Modular Equipment Type | Single Modular Approval | ||||
various | Does not apply | |||||
various | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
various | Original Equipment | |||||
various | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
various | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
various | Grant Comments | Class II permissive change to show compliance with New U-NII sub bands rule per FCC ET docket No. 13-49. Power output listed is maximum combined conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. | ||||
various | Class II Permissive Change to add portable condition for ASUS Notebook model numbers NX500J & GX500J. Output power is conducted. Approval for mobile installation is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. | |||||
various | Class II Permissive Change to add portable condition for ASUS Notebook model numbers NX500J & GX500J. Power output listed is maximum combined conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. 802.11 operations in the 2.4 GHz band support only 20 and 40 MHz bandwidths. Approval for mobile installation is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The highest reported SAR in this C2PC filing is 1.21 W/Kg. | |||||
various | Class II Permissive Change to add portable condition for ASUS Notebook model numbers NX500J & GX500J. Power output listed is maximum combined conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. Approval for mobile installation is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The highest reported SAR in this C2PC filing is 1.20 W/Kg. | |||||
various | Class II Permissive change application to alternate a dipole antenna as documented. Output power is conducted. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. | |||||
various | Class II Permissive change application to alternate a dipole antenna with power reduction as documented. Power output listed is maximum combined conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. | |||||
various | Class II Permissive change application to alternate a dipole antenna as documented in this filing. | |||||
various | Class II Permissive change application to alternate a dipole antenna with power reduction as documented. Power output listed is maximum combined conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. 802.11 operations in the 2.4 GHz band support only 20 and 40 MHz bandwidths. Approval for mobile installation is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. | |||||
various | Output power is conducted. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. | |||||
various | Power output listed is maximum combined conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. Approval is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. | |||||
various | Power output listed is maximum combined conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. 802.11 operations in the 2.4 GHz band support only 20 and 40 MHz bandwidths. Approval for mobile installation is valid when antennas used for this transmitter are installed to provide a minimum antenna separation distance of 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. | |||||
various | Is there an equipment authorization waiver associated with this application? | No | ||||
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
various | Firm Name |
SPORTON International Inc.
|
||||
various |
DEKRA TESTING AND CERTIFICATION CO., LTD.
|
|||||
various |
Sporton International Inc.
|
|||||
various | Name |
S****** J****
|
||||
various |
W**** L******
|
|||||
various |
A****** C******
|
|||||
various | Telephone Number |
886-3******** Extension:
|
||||
various |
886-3******** Extension:
|
|||||
various |
886-3******** Extension:
|
|||||
various | Fax Number |
886-3********
|
||||
various |
886-3********
|
|||||
various |
886-3********
|
|||||
various |
s******@sporton.com.tw
|
|||||
various |
w******@dekra.com
|
|||||
various |
a******@sporton.com.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.0282 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.0489 | |||||||||||||||||||||||||||||||||||
1 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.0467 | |||||||||||||||||||||||||||||||||||
1 | 4 | 15E | 38 CC MO | 5260 | 5320 | 0.091 | |||||||||||||||||||||||||||||||||||
1 | 5 | 15E | 38 CC MO | 5270 | 5310 | 0.1803 | |||||||||||||||||||||||||||||||||||
1 | 6 | 15E | 38 CC MO | 5290 | 5290 | 0.0673 | |||||||||||||||||||||||||||||||||||
1 | 7 | 15E | 38 CC MO | 5500 | 5720 | 0.09 | |||||||||||||||||||||||||||||||||||
1 | 8 | 15E | 38 CC MO | 5510 | 5710 | 0.2099 | |||||||||||||||||||||||||||||||||||
1 | 9 | 15E | 38 CC MO | 5530 | 5690 | 0.2339 | |||||||||||||||||||||||||||||||||||
1 | 1 | 15E | 38 CC MO | 5745 | 5825 | 0.3499 | |||||||||||||||||||||||||||||||||||
1 | 11 | 15E | 38 CC MO | 5755 | 5795 | 0.1991 | |||||||||||||||||||||||||||||||||||
1 | 12 | 15E | 38 CC MO | 5775 | 5775 | 0.0528 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0008000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC | 2402 | 2480 | 0.0007 | |||||||||||||||||||||||||||||||||||
3 | 2 | 15C | CC MO | 2412 | 2472 | 0.507 | |||||||||||||||||||||||||||||||||||
3 | 3 | 15C | CC MO | 2412 | 2462 | 0.1 | |||||||||||||||||||||||||||||||||||
3 | 4 | 15C | CC MO | 5745 | 5825 | 0.3917 | |||||||||||||||||||||||||||||||||||
3 | 5 | 15C | CC MO | 5755 | 5795 | 0.3041 | |||||||||||||||||||||||||||||||||||
3 | 6 | 15C | CC MO | 5775 | 5775 | 0.2208 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15E | CC MO | 5180 | 5240 | 0.0282 | |||||||||||||||||||||||||||||||||||
4 | 2 | 15E | CC MO | 5190 | 5230 | 0.0489 | |||||||||||||||||||||||||||||||||||
4 | 3 | 15E | CC MO | 5210 | 5210 | 0.0467 | |||||||||||||||||||||||||||||||||||
4 | 4 | 15E | CC MO | 5260 | 5320 | 0.091 | |||||||||||||||||||||||||||||||||||
4 | 5 | 15E | CC MO | 5270 | 5310 | 0.1803 | |||||||||||||||||||||||||||||||||||
4 | 6 | 15E | CC MO | 5290 | 5290 | 0.0673 | |||||||||||||||||||||||||||||||||||
4 | 7 | 15E | CC MO | 5500 | 5700 | 0.09 | |||||||||||||||||||||||||||||||||||
4 | 8 | 15E | CC MO | 5510 | 5710 | 0.2099 | |||||||||||||||||||||||||||||||||||
4 | 9 | 15E | CC MO | 5530 | 5690 | 0.2339 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
5 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0008000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
6 | 1 | 15E | 36 CC MO | 5180 | 5240 | 0.0282 | |||||||||||||||||||||||||||||||||||
6 | 2 | 15E | 36 CC MO | 5190 | 5230 | 0.0489 | |||||||||||||||||||||||||||||||||||
6 | 3 | 15E | 36 CC MO | 5210 | 5210 | 0.0467 | |||||||||||||||||||||||||||||||||||
6 | 4 | 15E | 36 CC MO | 5260 | 5320 | 0.091 | |||||||||||||||||||||||||||||||||||
6 | 5 | 15E | 36 CC MO | 5270 | 5310 | 0.1803 | |||||||||||||||||||||||||||||||||||
6 | 6 | 15E | 36 CC MO | 5290 | 5290 | 0.0673 | |||||||||||||||||||||||||||||||||||
6 | 7 | 15E | 36 CC MO | 5500 | 5720 | 0.09 | |||||||||||||||||||||||||||||||||||
6 | 8 | 15E | 36 CC MO | 5510 | 5710 | 0.2099 | |||||||||||||||||||||||||||||||||||
6 | 9 | 15E | 36 CC MO | 5530 | 5690 | 0.2339 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
7 | 1 | 15B | CC | ||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
8 | 1 | 15C | CC | 2402 | 2480 | 0.007 | |||||||||||||||||||||||||||||||||||
8 | 2 | 15C | CC MO | 2412 | 2472 | 0.507 | |||||||||||||||||||||||||||||||||||
8 | 3 | 15C | CC MO | 2412 | 2462 | 0.1 | |||||||||||||||||||||||||||||||||||
8 | 4 | 15C | 36 CC MO | 5745 | 5825 | 0.3917 | |||||||||||||||||||||||||||||||||||
8 | 5 | 15C | 36 CC MO | 5755 | 5795 | 0.3041 | |||||||||||||||||||||||||||||||||||
8 | 6 | 15C | 36 CC MO | 5775 | 5775 | 0.2208 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
9 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0008000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
10 | 1 | 15E | CC MO | 5180 | 5240 | 0.0282 | |||||||||||||||||||||||||||||||||||
10 | 2 | 15E | CC MO | 5190 | 5230 | 0.0489 | |||||||||||||||||||||||||||||||||||
10 | 3 | 15E | CC MO | 5210 | 5210 | 0.0467 | |||||||||||||||||||||||||||||||||||
10 | 4 | 15E | CC MO | 5260 | 5320 | 0.091 | |||||||||||||||||||||||||||||||||||
10 | 5 | 15E | CC MO | 5270 | 5310 | 0.1803 | |||||||||||||||||||||||||||||||||||
10 | 6 | 15E | CC MO | 5290 | 5290 | 0.0673 | |||||||||||||||||||||||||||||||||||
10 | 7 | 15E | CC MO | 5500 | 5720 | 0.09 | |||||||||||||||||||||||||||||||||||
10 | 8 | 15E | CC MO | 5510 | 5710 | 0.2099 | |||||||||||||||||||||||||||||||||||
10 | 9 | 15E | CC MO | 5530 | 5690 | 0.2339 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
11 | 1 | 15B | CC | ||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
12 | 1 | 15C | CC | 2402 | 2480 | 0.0007 | |||||||||||||||||||||||||||||||||||
12 | 2 | 15C | CC MO | 2412 | 2472 | 0.507 | |||||||||||||||||||||||||||||||||||
12 | 3 | 15C | CC MO | 2412 | 2462 | 0.1 | |||||||||||||||||||||||||||||||||||
12 | 4 | 15C | CC MO | 5745 | 5825 | 0.3917 | |||||||||||||||||||||||||||||||||||
12 | 5 | 15C | CC MO | 5755 | 5795 | 0.3041 | |||||||||||||||||||||||||||||||||||
12 | 6 | 15C | CC MO | 5775 | 5775 | 0.2208 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC