submitted / available | |||||||
---|---|---|---|---|---|---|---|
|
Host System manual | Users Manual | 144.82 KiB | ||||
|
User Manual | Users Manual | 4.62 MiB | / December 08 2014 | |||
|
User Manual Regulatory | Users Manual | 461.56 KiB | / December 08 2014 | |||
|
UserMan Host1 | Users Manual | 555.18 KiB | ||||
|
UserMan Host2 | Users Manual | 446.18 KiB | ||||
|
UserMan Module | Users Manual | 337.85 KiB | ||||
Test Report | November 02 2016 | ||||||
Test Setup Photos | November 02 2016 | ||||||
RF Exposure Info | November 02 2016 | ||||||
Cover Letter(s) | November 02 2016 | ||||||
Cover Letter(s) | November 02 2016 | ||||||
Cover Letter(s) | November 02 2016 | ||||||
Cover Letter(s) | |||||||
Test Report | |||||||
Test Setup Photos | / December 08 2014 | ||||||
Cover Letter(s) | |||||||
Cover Letter(s) | |||||||
RF Exposure Info | |||||||
Test Report | |||||||
Test Setup Photos | / December 08 2014 | ||||||
Test Report | |||||||
Test Setup Photos | / December 08 2014 | ||||||
RF Exposure Info | |||||||
Cover Letter(s) | |||||||
Test Report | |||||||
Test Setup Photos | / December 08 2014 | ||||||
Cover Letter(s) | |||||||
Cover Letter(s) | |||||||
External Photos | / December 08 2014 | ||||||
Internal Photos | / December 08 2014 | ||||||
ID Label/Location Info | |||||||
Cover Letter(s) | |||||||
RF Exposure Info | |||||||
RF Exposure Info | |||||||
RF Exposure Info | |||||||
RF Exposure Info | June 03 2014 | ||||||
Test Report | June 03 2014 | ||||||
Test Report | June 03 2014 | ||||||
Test Report | June 03 2014 | ||||||
Test Setup Photos | / December 08 2014 | ||||||
Test Setup Photos | / December 08 2014 | ||||||
Test Setup Photos | / December 08 2014 | ||||||
Test Setup Photos | / December 08 2014 | ||||||
Cover Letter(s) | |||||||
Test Report | June 03 2014 | ||||||
Test Setup Photos | / December 08 2014 | ||||||
Test Setup Photos | / December 08 2014 | ||||||
Test Report | June 03 2014 | ||||||
Test Setup Photos | |||||||
Cover Letter(s) | |||||||
Cover Letter(s) | |||||||
Cover Letter(s) | |||||||
External Photos | / September 11 2013 | ||||||
ID Label/Location Info | |||||||
ID Label/Location Info | |||||||
ID Label/Location Info | |||||||
ID Label/Location Info | |||||||
Internal Photos | / September 11 2013 | ||||||
RF Exposure Info | |||||||
Test Setup Photos | / September 11 2013 | ||||||
Cover Letter(s) | May 06 2013 / June 06 2013 | ||||||
Cover Letter(s) | May 06 2013 / June 06 2013 | ||||||
ID Label/Location Info | May 06 2013 / June 06 2013 | ||||||
Cover Letter(s) | May 06 2013 / June 06 2013 | ||||||
RF Exposure Info | May 06 2013 / June 06 2013 | ||||||
Test Setup Photos | May 06 2013 / June 06 2013 | ||||||
Internal Photos | March 04 2013 | ||||||
ID Label/Location Info | / March 04 2013 | ||||||
External Photos | March 04 2013 | ||||||
|
Model number declaration between manual and C2PC Letter | Attestation Statements | 452.04 KiB | / March 04 2013 | |||
Test Setup Photos | March 04 2013 | ||||||
Test Report | March 04 2013 | ||||||
RF Exposure Info | March 04 2013 | ||||||
RF Exposure Info | March 04 2013 | ||||||
RF Exposure Info | March 04 2013 | ||||||
RF Exposure Info | March 04 2013 | ||||||
RF Exposure Info | March 04 2013 | ||||||
RF Exposure Info | March 04 2013 | ||||||
Test Setup Photos | March 04 2013 | ||||||
Test Setup Photos | March 04 2013 | ||||||
Test Setup Photos | March 04 2013 | ||||||
Test Report | March 04 2013 | ||||||
Test Setup Photos | March 04 2013 | ||||||
Test Report | March 04 2013 | ||||||
Test Report | March 04 2013 | ||||||
Test Setup Photos | March 04 2013 | ||||||
Cover Letter(s) | |||||||
Internal Photos | |||||||
Internal Photos | |||||||
ID Label/Location Info | |||||||
ID Label/Location Info | |||||||
ID Label/Location Info | |||||||
RF Exposure Info | |||||||
RF Exposure Info | |||||||
RF Exposure Info | |||||||
RF Exposure Info | |||||||
RF Exposure Info | |||||||
RF Exposure Info | |||||||
ID Label/Location Info | |||||||
RF Exposure Info | |||||||
Cover Letter(s) |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2016-02-11 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | Class II permissive change or modification of presently authorized equipment |
2 | 2014-02-20 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
3 | 5755 ~ 5795 | DTS - Digital Transmission System | ||
4 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | ||
5 | 2014-02-19 | 5755 ~ 5795 | DTS - Digital Transmission System | |
6 | 2014-02-14 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | |
7 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
8 | 2013-06-18 | 5500 ~ 5700 | NII - Unlicensed National Information Infrastructure TX | |
9 | 5745 ~ 5825 | DTS - Digital Transmission System | ||
10 | 2013-06-06 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
11 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | ||
12 | 5755 ~ 5795 | DTS - Digital Transmission System | ||
13 | 2013-04-03 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | |
14 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
15 | 5755 ~ 5795 | DTS - Digital Transmission System | ||
16 | 2012-11-23 | 5755 ~ 5795 | DTS - Digital Transmission System | |
17 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | ||
18 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | ||
19 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
20 | 5755 ~ 5795 | DTS - Digital Transmission System | ||
21 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
22 | 2012-09-20 | 5755 ~ 5795 | DTS - Digital Transmission System | |
23 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | ||
24 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
25 | 2012-03-28 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
26 | 5755 ~ 5795 | DTS - Digital Transmission System | ||
27 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | ||
28 | 2012-02-28 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | |
29 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
30 | 5755 ~ 5795 | DTS - Digital Transmission System | ||
31 | 2011-06-30 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | Original Equipment |
32 | JBP - Part 15 Class B Computing Device Peripheral | |||
33 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
34 | 2011-06-29 | 5755 ~ 5795 | DTS - Digital Transmission System |
Applicant Information | ||||||
---|---|---|---|---|---|---|
Effective |
2016-02-11
|
|||||
2014-02-20
|
||||||
2014-02-19
|
||||||
2014-02-14
|
||||||
2013-06-18
|
||||||
2013-06-06
|
||||||
2013-04-03
|
||||||
2012-11-23
|
||||||
2012-09-20
|
||||||
2012-03-28
|
||||||
2012-02-28
|
||||||
2011-06-30
|
||||||
2011-06-29
|
||||||
Applicant's complete, legal business name |
Broadcom Corporation
|
|||||
FCC Registration Number (FRN) |
0007091952
|
|||||
Physical Address |
270 Innovation Drive
|
|||||
San Jose, California 95134
|
||||||
United States
|
||||||
TCB Information | ||||||
TCB Application Email Address |
L******@ul.com
|
|||||
T******@TIMCOENGR.COM
|
||||||
h******@acbcert.com
|
||||||
t******@siemic.com
|
||||||
c******@ccsemc.com
|
||||||
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||||
FCC ID | ||||||
Grantee Code |
QDS
|
|||||
Equipment Product Code |
BRCM1058
|
|||||
Person at the applicant's address to receive grant or for contact | ||||||
Name |
A******** L****
|
|||||
Title |
Manager, Compliance Engineering
|
|||||
Telephone Number |
40892********
|
|||||
Fax Number |
408-5********
|
|||||
a******@broadcom.com
|
||||||
Technical Contact | ||||||
Firm Name |
UL VERIFICATION SERVICES INC.
|
|||||
UL Verification Services
|
||||||
SGS Taiwan Ltd. Electronics & Communication Labora
|
||||||
National Technical Systems
|
||||||
Compliance Certification Services
|
||||||
Name |
A****** A********
|
|||||
A******** K******
|
||||||
J**** H********
|
||||||
D****** D****
|
||||||
A**** Z********
|
||||||
T****** C****
|
||||||
Physical Address |
47173 Benicia St
|
|||||
47173 Benicia Street
|
||||||
134, Wu Kung Road, New Taipei Industrial Park
|
||||||
41039 Boyce Road
|
||||||
Fremont, California 94538
|
||||||
Fremont, 94538
|
||||||
New Taipei City, 24803
|
||||||
United States
|
||||||
Taiwan
|
||||||
Telephone Number |
510.7********
|
|||||
(510)********
|
||||||
886 2******** Extension:
|
||||||
51057********
|
||||||
(510)********
|
||||||
Fax Number |
510.6********
|
|||||
(510)********
|
||||||
886-2********
|
||||||
51044********
|
||||||
(510)********
|
||||||
A******@ul.com
|
||||||
A******@ul.com
|
||||||
j******@sgs.com
|
||||||
s******@nts.com
|
||||||
a******@ccsemc.com
|
||||||
T******@CCSEMC.COM
|
||||||
Non Technical Contact | ||||||
Firm Name |
UL VERIFICATION SERVICES INC.
|
|||||
Compliance Certification Services
|
||||||
Name |
A**** A****
|
|||||
A******** Z******
|
||||||
T******** C****
|
||||||
Physical Address |
47173 Benicia St
|
|||||
47173 Benicia Street
|
||||||
Fremont, California 94538
|
||||||
Telephone Number |
510-7********
|
|||||
(510)********
|
||||||
Fax Number |
510.6********
|
|||||
(510)********
|
||||||
A******@ul.com
|
||||||
a******@ccsemc.com
|
||||||
T******@CCSEMC.COM
|
||||||
Confidentiality (long or short term) | ||||||
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | |||||
Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | |||||
Yes | ||||||
If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 08/12/2014 | |||||
08/13/2014 | ||||||
11/09/2013 | ||||||
12/02/2013 | ||||||
09/30/2013 | ||||||
05/22/2013 | ||||||
03/19/2013 | ||||||
09/24/2012 | ||||||
12/25/2011 | ||||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
Cognitive Radio & Software Defined Radio, Class, etc | ||||||
Is this application for software defined/cognitive radio authorization? | No | |||||
Equipment Class | NII - Unlicensed National Information Infrastructure TX | |||||
DSS - Part 15 Spread Spectrum Transmitter | ||||||
DTS - Digital Transmission System | ||||||
JBP - Part 15 Class B Computing Device Peripheral | ||||||
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 802.11a/bg/n WLAN + Bluetooth PCI-E Mini Card | |||||
802.11a/b/g/n WLAN + BLUETOOTH PCI-E MINI CARD | ||||||
802.11abgn WLAN+BLUETOOTH PCI-E MINICARD | ||||||
Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | |||||
Modular Equipment Type | Single Modular Approval | |||||
Limited Single Modular Approval | ||||||
Does not apply | ||||||
Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | |||||
Original Equipment | ||||||
Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | |||||
Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | |||||
Grant Comments | Class II Permissive Change. Power listed is the maximum combined conducted output power. Client device per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. Use at lesser separation distance requires SAR evaluation and additional certification. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR across all filings under this FCCID for stand-alone and simultaneous transmission exposure conditions are 1.49W/kg and 1.49W/kg respectively. | |||||
C2PC to add a new dipole antenna(81XCAA15.G03). Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures or as described in the filing. OEM integrators and end users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. | ||||||
C2PC to add a new dipole antenna(81XCAA15.G03) requiring reduced output power on some channels to meet radiated emissions requirements at band edges as detailed in this filing. Power listed is the maximum combined conducted output power. Client device without radar detection per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. | ||||||
C2PC to add a new dipole antenna(81XCAA15.G03) requiring reduced output power on some channels to meet radiated emissions requirements at band edges as detailed in this filing. Power listed is the maximum combined conducted output power. Client device per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. | ||||||
Power listed is the maximum combined conducted output power. Client device without radar detection per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 06/30/2011) Class II Permissive Change: This Class II Permissive Change is to add this module to a portable platform, Lenovo model: Lenovo Miix 2 11. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.50W/kg and 1.48W/kg, respectively. | ||||||
Power listed is the maximum combined conducted output power. Client device per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 06/30/2011) Class II Permissive Change: This Class II Permissive Change is to add this module to a portable platform, Lenovo model: Lenovo Miix 2 11. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.49W/kg and 1.46W/kg, respectively. | ||||||
Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures or as described in the filing. OEM integrators and end users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. (Date of Grant: 06/30/2011) Class II Permissive Change: This Class II Permissive Change is to add this module to a portable platform, Lenovo model: Lenovo Miix 2 11. | ||||||
Class II Permissive Change to cover installation into portable hosts ACER V5MM1 and V5MM2 laptop/tablet computers. Power listed is the maximum combined conducted output power. Client device per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module supporting 20MHz and 40MHz bandwidths. Operations in the 5150-5250MHz band is limited to indoor use only. Approval is limited to OEM installation only in mobile/portable RF exposure configurations. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Highest reported SAR value across all filings under this FCC ID is: 1.19 W/kg. Highest reported SAR for this filing is 1.19W/Kg. | ||||||
Class II Permissive Change to cover installation into portable hosts ACER V5MM1 and V5MM2 laptop/tablet computers. Power listed is the maximum combined conducted output power. Device is 2x2 Spatial Multiplexing MIMO Module. This device supports 20MHz and 40MHz bandwidths for MIMO modes. Approval is limited to OEM installation only in mobile/portable RF exposure configurations. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Highest reported SAR value across all filings under this FCC ID is: 1.19 W/kg. Highest reported SAR for this filing is 1.19W/Kg. | ||||||
Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures or as described in the filing. OEM integrators and end users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. | ||||||
Power listed is the maximum combined conducted output power. Client device per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile/portable RF exposure configurations. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Highest reported SAR value is: 0.73 W/kg. This permissive change to add stand alone portable/mobile configurations at 5mm distance. | ||||||
Power listed is the maximum combined conducted output power. Client device without radar detection per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile/portable RF exposure configurations. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Highest reported SAR value is: 0.73 W/kg. This permissive change to add stand alone portable/mobile configurations at 5mm distance. | ||||||
C2PC for Portable platform (Lenovo TP00056A ) Highest reported SAR is : 1.30W/kg Power listed is the maximum combined conducted output power. Client device per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. | ||||||
C2PC for Portable platform (Lenovo TP00056A ) Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multitransmitter product procedures or as described in the filing. OEM integrators and end users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. | ||||||
C2PC for Portable platform (Lenovo TP00056A ) Highest reported SAR is : 0.65W/kg Power listed is the maximum combined conducted output power. Client device without radar detection per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.. | ||||||
Class II permissive change to add portable use condition and antenna in Acer/Q1VZC laptop as described in this filing. The antenna-to-user separation distance in this configuration is 197 mm. Modular Approval. Power listed is the maximum combined conducted output power. Client device without radar detection per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multitransmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end- Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR value for this filing is < 0.1 W/Kg. The highest measured SAR value across all filings under this FCC ID is 0.85 W/Kg. | ||||||
Class II permissive change to add portable use condition and antenna in Acer/Q5LJ1 laptop as described in this filing. The antenna-to-user separation distance in this configuration is 15 mm. Modular Approval. Power listed is the maximum combined conducted output power. Client device per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multitransmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR value for this filing is 1.1 W/Kg. The highest measured SAR value across all filings under this FCC ID is 1.1 W/Kg. | ||||||
Class II permissive change to add portable use condition and antenna in Acer/Q1VZC laptop as described in this filing. The antenna-to-user separation distance in this configuration is 197 mm. Modular Approval. Power listed is the maximum combined conducted output power. Client device per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multitransmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR value for this filing is < 0.1 W/Kg. The highest measured SAR value across all filings under this FCC ID is 1.1 W/Kg. | ||||||
Class II permissive change to add portable use condition and antenna in Acer/Q5LJ1 laptop as described in this filing. The antenna-to-user separation distance in this configuration is 15 mm. Modular Approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must not be colocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures or as described in the filing. OEM integrators and end users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. | ||||||
Class II permissive change to add portable use condition and antenna in Acer/Q5LJ1 laptop as described in this filing. The antenna-to-user separation distance in this configuration is 15 mm. Modular Approval. Power listed is the maximum combined conducted output power. Client device without radar detection per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multitransmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end- Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR value for this filing is 0.85 W/Kg. The highest measured SAR value across all filings under this FCC ID is 0.85 W/Kg. | ||||||
Class II permissive change to add portable use condition and antenna in Acer/Q1VZC laptop as described in this filing. The antenna-to-user separation distance in this configuration is 197 mm. Modular Approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must not be colocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures or as described in the filing. OEM integrators and end users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. | ||||||
Class II permissive change to add portable use condition and antenna in MA50 laptop as described in this filing. The antenna-to-user separation distance in this configuration is 5.7 mm. Modular Approval. Power listed is the maximum combined conducted output power. Client device without radar detection per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end- Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR value for this filing is 0.45 W/Kg. The highest measured SAR value across all filings under this FCC ID is 0.45 W/Kg. | ||||||
Class II permissive change to add portable use condition and antenna in MA50 laptop as described in this filing. The antenna-to-user separation distance in this configuration is 5.7 mm. Modular Approval. Power listed is the maximum combined conducted output power. Client device per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multitransmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR value for this filing is 0.98 W/Kg. The highest measured SAR value across all filings under this FCC ID is 0.98 W/Kg. | ||||||
Class II permissive change to add portable use condition and antenna in MA50 laptop as described in this filing. The antenna-to-user separation distance in this configuration is 5.7 mm. Modular Approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must not be colocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures or as described in the filing. OEM integrators and end users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. | ||||||
Class II permissive change filing to add a new monopole antenna type. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures or as described in the filing. OEM integrators and end users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. | ||||||
Class II permissive change filing to add a new monopole antenna type. Power listed is the maximum combined conducted output power. Client device without radar detection per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. This grant is valid only when the device is sold to and installed by OEM integrators or when two way BIOS Lock is employed to allow end user installation. Approval is limited to installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. | ||||||
Class II permissive change filing to add two-way BIOS Lock for end user installation in qualified Lenovo notebook computer platforms. Power listed is the maximum combined conducted output power. Client device without radar detection per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. This grant is valid only when the device is sold to and installed by OEM integrators or when two way BIOS Lock is employed to allow end user installation. Approval is limited to installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. | ||||||
Class II permissive change filing to add two-way BIOS Lock for end user installation in qualified Lenovo notebook computer platforms. Output power listed is conducted. This grant is valid only when the device is sold to and installed by OEM integrators or when two way BIOS Lock is employed to allow end user installation. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures or as described in the filing. OEM integrators and end users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. | ||||||
Power listed is the maximum combined conducted output power. Client device per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. | ||||||
Power listed is the maximum combined conducted output power. Client device without radar detection per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. | ||||||
Is there an equipment authorization waiver associated with this application? | No | |||||
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | |||||
Test Firm Name and Contact Information | ||||||
Firm Name |
UL Verification Services Inc. (formerly UL CCS)
|
|||||
Compliance Certification Services
|
||||||
Sporton International Inc.
|
||||||
SGS Taiwan Ltd.
|
||||||
National Technical Systems
|
||||||
Compliance Certification Services Inc.
|
||||||
SGS TAIWAN LTD.
|
||||||
Compliance Certification Services (UL CCS)
|
||||||
Name |
M****** M****
|
|||||
T****** C********
|
||||||
A******** C****
|
||||||
J******** L******
|
||||||
D****** B****
|
||||||
H****** L****
|
||||||
N**** B********
|
||||||
B******** J******
|
||||||
Telephone Number |
919 5********
|
|||||
510-7********
|
||||||
886-3******** Extension:
|
||||||
886-2******** Extension:
|
||||||
510-5********
|
||||||
886-2******** Extension:
|
||||||
886-2******** Extension:
|
||||||
510-7********
|
||||||
Fax Number |
000-0********
|
|||||
510-6********
|
||||||
886-3********
|
||||||
886 2********
|
||||||
510 5********
|
||||||
886-2********
|
||||||
886-2********
|
||||||
m******@ul.com
|
||||||
t******@ccsemc.com
|
||||||
a******@sporton.com.tw
|
||||||
j******@sgs.com
|
||||||
d******@nts.com
|
||||||
h******@sgs.com
|
||||||
n******@sgs.com
|
||||||
b******@ccsemc.com
|
||||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.025 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15E | 38 CC MO | 5260 | 5320 | 0.101 | |||||||||||||||||||||||||||||||||||
1 | 3 | 15E | 38 CC MO | 5500 | 5700 | 0.116 | |||||||||||||||||||||||||||||||||||
1 | 4 | 15E | 38 CC MO | 5745 | 5825 | 0.152 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0030000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC | 2412 | 2462 | 0.575 | |||||||||||||||||||||||||||||||||||
3 | 2 | 15C | CC MO | 2412 | 2462 | 0.774 | |||||||||||||||||||||||||||||||||||
3 | 3 | 15C | CC MO | 2422 | 2452 | 0.299 | |||||||||||||||||||||||||||||||||||
3 | 4 | 15C | CC | 5745 | 5825 | 0.39 | |||||||||||||||||||||||||||||||||||
3 | 5 | 15C | CC MO | 5745 | 5825 | 0.647 | |||||||||||||||||||||||||||||||||||
3 | 6 | 15C | CC MO | 5755 | 5795 | 0.711 | |||||||||||||||||||||||||||||||||||
3 | 7 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15E | CC | 5180 | 5240 | 0.025 | |||||||||||||||||||||||||||||||||||
4 | 2 | 15E | CC MO | 5180 | 5240 | 0.017 | |||||||||||||||||||||||||||||||||||
4 | 3 | 15E | CC MO | 5190 | 5230 | 0.019 | |||||||||||||||||||||||||||||||||||
4 | 4 | 15E | CC | 5260 | 5320 | 0.055 | |||||||||||||||||||||||||||||||||||
4 | 5 | 15E | CC MO | 5260 | 5320 | 0.087 | |||||||||||||||||||||||||||||||||||
4 | 6 | 15E | CC MO | 5270 | 5310 | 0.101 | |||||||||||||||||||||||||||||||||||
4 | 7 | 15E | CC | 5500 | 5700 | 0.055 | |||||||||||||||||||||||||||||||||||
4 | 8 | 15E | CC MO | 5500 | 5700 | 0.094 | |||||||||||||||||||||||||||||||||||
4 | 9 | 15E | CC MO | 5510 | 5670 | 0.116 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
5 | 1 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
5 | 2 | 15C | CC | 2412 | 2462 | 0.575 | |||||||||||||||||||||||||||||||||||
5 | 3 | 15C | CC MO | 2412 | 2462 | 0.774 | |||||||||||||||||||||||||||||||||||
5 | 4 | 15C | CC MO | 2422 | 2452 | 0.299 | |||||||||||||||||||||||||||||||||||
5 | 5 | 15C | CC | 5745 | 5825 | 0.39 | |||||||||||||||||||||||||||||||||||
5 | 6 | 15C | CC MO | 5745 | 5825 | 0.647 | |||||||||||||||||||||||||||||||||||
5 | 7 | 15C | CC MO | 5755 | 5795 | 0.711 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
6 | 1 | 15E | CC | 5180 | 5240 | 0.025 | |||||||||||||||||||||||||||||||||||
6 | 2 | 15E | CC MO | 5180 | 5240 | 0.017 | |||||||||||||||||||||||||||||||||||
6 | 3 | 15E | CC MO | 5190 | 5230 | 0.019 | |||||||||||||||||||||||||||||||||||
6 | 4 | 15E | CC | 5260 | 5320 | 0.055 | |||||||||||||||||||||||||||||||||||
6 | 5 | 15E | CC MO | 5260 | 5320 | 0.087 | |||||||||||||||||||||||||||||||||||
6 | 6 | 15E | CC MO | 5270 | 5310 | 0.101 | |||||||||||||||||||||||||||||||||||
6 | 7 | 15E | CC | 5500 | 5700 | 0.055 | |||||||||||||||||||||||||||||||||||
6 | 8 | 15E | CC MO | 5500 | 5700 | 0.094 | |||||||||||||||||||||||||||||||||||
6 | 9 | 15E | CC MO | 5510 | 5670 | 0.116 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
7 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0030000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
8 | 1 | 15E | CC | 5180 | 5240 | 0.025 | |||||||||||||||||||||||||||||||||||
8 | 2 | 15E | CC MO | 5180 | 5240 | 0.019 | |||||||||||||||||||||||||||||||||||
8 | 3 | 15E | CC | 5260 | 5320 | 0.055 | |||||||||||||||||||||||||||||||||||
8 | 4 | 15E | CC MO | 5260 | 5320 | 0.101 | |||||||||||||||||||||||||||||||||||
8 | 5 | 15E | CC | 5500 | 5700 | 0.055 | |||||||||||||||||||||||||||||||||||
8 | 6 | 15E | CC MO | 5500 | 5700 | 0.116 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
9 | 1 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
9 | 2 | 15C | CC | 2412 | 2462 | 0.575 | |||||||||||||||||||||||||||||||||||
9 | 3 | 15C | CC MO | 2412 | 2462 | 0.774 | |||||||||||||||||||||||||||||||||||
9 | 4 | 15C | CC | 5745 | 5825 | 0.39 | |||||||||||||||||||||||||||||||||||
9 | 5 | 15C | CC MO | 5745 | 5825 | 0.711 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
10 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0030000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
11 | 1 | 15E | CC | 5180 | 5240 | 0.025 | |||||||||||||||||||||||||||||||||||
11 | 2 | 15E | CC MO | 5180 | 5240 | 0.017 | |||||||||||||||||||||||||||||||||||
11 | 3 | 15E | CC MO | 5190 | 5230 | 0.019 | |||||||||||||||||||||||||||||||||||
11 | 4 | 15E | CC | 5260 | 5320 | 0.055 | |||||||||||||||||||||||||||||||||||
11 | 5 | 15E | CC MO | 5260 | 5320 | 0.087 | |||||||||||||||||||||||||||||||||||
11 | 6 | 15E | CC MO | 5270 | 5310 | 0.101 | |||||||||||||||||||||||||||||||||||
11 | 7 | 15E | CC | 5500 | 5700 | 0.055 | |||||||||||||||||||||||||||||||||||
11 | 8 | 15E | CC MO | 5500 | 5700 | 0.094 | |||||||||||||||||||||||||||||||||||
11 | 9 | 15E | CC MO | 5510 | 5670 | 0.116 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
12 | 1 | 15C | CC | 2412 | 2462 | 0.575 | |||||||||||||||||||||||||||||||||||
12 | 2 | 15C | CC MO | 2412 | 2462 | 0.774 | |||||||||||||||||||||||||||||||||||
12 | 3 | 15C | CC MO | 2422 | 2452 | 0.299 | |||||||||||||||||||||||||||||||||||
12 | 4 | 15C | CC | 5745 | 5825 | 0.39 | |||||||||||||||||||||||||||||||||||
12 | 5 | 15C | CC MO | 5745 | 5825 | 0.647 | |||||||||||||||||||||||||||||||||||
12 | 6 | 15C | CC MO | 5755 | 5795 | 0.711 | |||||||||||||||||||||||||||||||||||
12 | 7 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
13 | 1 | 15E | CC | 5180 | 5240 | 0.025 | |||||||||||||||||||||||||||||||||||
13 | 2 | 15E | CC MO | 5180 | 5240 | 0.017 | |||||||||||||||||||||||||||||||||||
13 | 3 | 15E | CC MO | 5190 | 5230 | 0.019 | |||||||||||||||||||||||||||||||||||
13 | 4 | 15E | CC | 5260 | 5320 | 0.055 | |||||||||||||||||||||||||||||||||||
13 | 5 | 15E | CC MO | 5260 | 5320 | 0.087 | |||||||||||||||||||||||||||||||||||
13 | 6 | 15E | CC MO | 5270 | 5310 | 0.101 | |||||||||||||||||||||||||||||||||||
13 | 7 | 15E | CC | 5500 | 5700 | 0.055 | |||||||||||||||||||||||||||||||||||
13 | 8 | 15E | CC MO | 5500 | 5700 | 0.094 | |||||||||||||||||||||||||||||||||||
13 | 9 | 15E | CC MO | 5510 | 5670 | 0.116 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
14 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0030000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
15 | 1 | 15C | CC | 2412 | 2462 | 0.575 | |||||||||||||||||||||||||||||||||||
15 | 2 | 15C | CC MO | 2412 | 2462 | 0.774 | |||||||||||||||||||||||||||||||||||
15 | 3 | 15C | CC MO | 2422 | 2452 | 0.299 | |||||||||||||||||||||||||||||||||||
15 | 4 | 15C | CC | 5745 | 5825 | 0.39 | |||||||||||||||||||||||||||||||||||
15 | 5 | 15C | CC MO | 5745 | 5825 | 0.647 | |||||||||||||||||||||||||||||||||||
15 | 6 | 15C | CC MO | 5755 | 5795 | 0.711 | |||||||||||||||||||||||||||||||||||
15 | 7 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
16 | 1 | 15C | CC | 2412 | 2462 | 0.575 | |||||||||||||||||||||||||||||||||||
16 | 2 | 15C | CC MO | 2412 | 2462 | 0.774 | |||||||||||||||||||||||||||||||||||
16 | 3 | 15C | CC MO | 2422 | 2452 | 0.299 | |||||||||||||||||||||||||||||||||||
16 | 4 | 15C | CC | 5745 | 5825 | 0.39 | |||||||||||||||||||||||||||||||||||
16 | 5 | 15C | CC MO | 5745 | 5825 | 0.647 | |||||||||||||||||||||||||||||||||||
16 | 6 | 15C | CC MO | 5755 | 5795 | 0.711 | |||||||||||||||||||||||||||||||||||
16 | 7 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
17 | 1 | 15E | CC | 5180 | 5240 | 0.025 | |||||||||||||||||||||||||||||||||||
17 | 2 | 15E | CC MO | 5180 | 5240 | 0.017 | |||||||||||||||||||||||||||||||||||
17 | 3 | 15E | CC MO | 5190 | 5230 | 0.019 | |||||||||||||||||||||||||||||||||||
17 | 4 | 15E | CC | 5260 | 5320 | 0.055 | |||||||||||||||||||||||||||||||||||
17 | 5 | 15E | CC MO | 5260 | 5320 | 0.087 | |||||||||||||||||||||||||||||||||||
17 | 6 | 15E | CC MO | 5270 | 5310 | 0.101 | |||||||||||||||||||||||||||||||||||
17 | 7 | 15E | CC | 5500 | 5700 | 0.055 | |||||||||||||||||||||||||||||||||||
17 | 8 | 15E | CC MO | 5500 | 5700 | 0.094 | |||||||||||||||||||||||||||||||||||
17 | 9 | 15E | CC MO | 5510 | 5670 | 0.116 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
18 | 1 | 15E | CC | 5180 | 5240 | 0.025 | |||||||||||||||||||||||||||||||||||
18 | 2 | 15E | CC MO | 5180 | 5240 | 0.017 | |||||||||||||||||||||||||||||||||||
18 | 3 | 15E | CC MO | 5190 | 5230 | 0.019 | |||||||||||||||||||||||||||||||||||
18 | 4 | 15E | CC | 5260 | 5320 | 0.055 | |||||||||||||||||||||||||||||||||||
18 | 5 | 15E | CC MO | 5260 | 5320 | 0.087 | |||||||||||||||||||||||||||||||||||
18 | 6 | 15E | CC MO | 5270 | 5310 | 0.101 | |||||||||||||||||||||||||||||||||||
18 | 7 | 15E | CC | 5500 | 5700 | 0.055 | |||||||||||||||||||||||||||||||||||
18 | 8 | 15E | CC MO | 5500 | 5700 | 0.094 | |||||||||||||||||||||||||||||||||||
18 | 9 | 15E | CC MO | 5510 | 5670 | 0.116 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
19 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0030000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
20 | 1 | 15C | CC | 2412 | 2462 | 0.575 | |||||||||||||||||||||||||||||||||||
20 | 2 | 15C | CC MO | 2412 | 2462 | 0.774 | |||||||||||||||||||||||||||||||||||
20 | 3 | 15C | CC MO | 2422 | 2452 | 0.299 | |||||||||||||||||||||||||||||||||||
20 | 4 | 15C | CC | 5745 | 5825 | 0.39 | |||||||||||||||||||||||||||||||||||
20 | 5 | 15C | CC MO | 5745 | 5825 | 0.647 | |||||||||||||||||||||||||||||||||||
20 | 6 | 15C | CC MO | 5755 | 5795 | 0.711 | |||||||||||||||||||||||||||||||||||
20 | 7 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
21 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0030000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
22 | 1 | 15C | CC | 2412 | 2462 | 0.575 | |||||||||||||||||||||||||||||||||||
22 | 2 | 15C | CC MO | 2412 | 2462 | 0.774 | |||||||||||||||||||||||||||||||||||
22 | 3 | 15C | CC MO | 2422 | 2452 | 0.299 | |||||||||||||||||||||||||||||||||||
22 | 4 | 15C | CC | 5745 | 5825 | 0.39 | |||||||||||||||||||||||||||||||||||
22 | 5 | 15C | CC MO | 5745 | 5825 | 0.647 | |||||||||||||||||||||||||||||||||||
22 | 6 | 15C | CC MO | 5755 | 5795 | 0.711 | |||||||||||||||||||||||||||||||||||
22 | 7 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
23 | 1 | 15E | CC | 5180 | 5240 | 0.025 | |||||||||||||||||||||||||||||||||||
23 | 2 | 15E | CC MO | 5180 | 5240 | 0.017 | |||||||||||||||||||||||||||||||||||
23 | 3 | 15E | CC MO | 5190 | 5230 | 0.019 | |||||||||||||||||||||||||||||||||||
23 | 4 | 15E | CC | 5260 | 5320 | 0.055 | |||||||||||||||||||||||||||||||||||
23 | 5 | 15E | CC MO | 5260 | 5320 | 0.087 | |||||||||||||||||||||||||||||||||||
23 | 6 | 15E | CC MO | 5270 | 5310 | 0.101 | |||||||||||||||||||||||||||||||||||
23 | 7 | 15E | CC | 5500 | 5700 | 0.055 | |||||||||||||||||||||||||||||||||||
23 | 8 | 15E | CC MO | 5500 | 5700 | 0.094 | |||||||||||||||||||||||||||||||||||
23 | 9 | 15E | CC MO | 5510 | 5670 | 0.116 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
24 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0030000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
25 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0030000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
26 | 1 | 15C | CC | 2412 | 2462 | 0.575 | |||||||||||||||||||||||||||||||||||
26 | 2 | 15C | CC MO | 2412 | 2462 | 0.774 | |||||||||||||||||||||||||||||||||||
26 | 3 | 15C | CC MO | 2422 | 2452 | 0.299 | |||||||||||||||||||||||||||||||||||
26 | 4 | 15C | CC | 5745 | 5825 | 0.39 | |||||||||||||||||||||||||||||||||||
26 | 5 | 15C | CC MO | 5745 | 5825 | 0.647 | |||||||||||||||||||||||||||||||||||
26 | 6 | 15C | CC MO | 5755 | 5795 | 0.711 | |||||||||||||||||||||||||||||||||||
26 | 7 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
27 | 1 | 15E | CC | 5180 | 5240 | 0.025 | |||||||||||||||||||||||||||||||||||
27 | 2 | 15E | CC MO | 5180 | 5240 | 0.017 | |||||||||||||||||||||||||||||||||||
27 | 3 | 15E | CC MO | 5190 | 5230 | 0.019 | |||||||||||||||||||||||||||||||||||
27 | 4 | 15E | CC | 5260 | 5320 | 0.055 | |||||||||||||||||||||||||||||||||||
27 | 5 | 15E | CC MO | 5260 | 5320 | 0.087 | |||||||||||||||||||||||||||||||||||
27 | 6 | 15E | CC MO | 5270 | 5310 | 0.101 | |||||||||||||||||||||||||||||||||||
27 | 7 | 15E | CC | 5500 | 5700 | 0.055 | |||||||||||||||||||||||||||||||||||
27 | 8 | 15E | CC MO | 5500 | 5700 | 0.094 | |||||||||||||||||||||||||||||||||||
27 | 9 | 15E | CC MO | 5510 | 5670 | 0.116 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
28 | 1 | 15E | CC MO | 5180 | 5240 | 0.017 | |||||||||||||||||||||||||||||||||||
28 | 2 | 15E | CC MO | 5190 | 5230 | 0.019 | |||||||||||||||||||||||||||||||||||
28 | 3 | 15E | CC MO | 5260 | 5320 | 0.087 | |||||||||||||||||||||||||||||||||||
28 | 4 | 15E | CC MO | 5270 | 5310 | 0.101 | |||||||||||||||||||||||||||||||||||
28 | 5 | 15E | CC | 5500 | 5700 | 0.055 | |||||||||||||||||||||||||||||||||||
28 | 6 | 15E | CC MO | 5500 | 5700 | 0.094 | |||||||||||||||||||||||||||||||||||
28 | 7 | 15E | CC MO | 5510 | 5670 | 0.116 | |||||||||||||||||||||||||||||||||||
28 | 8 | 15E | CC | 5180 | 5240 | 0.025 | |||||||||||||||||||||||||||||||||||
28 | 9 | 15E | CC | 5260 | 5320 | 0.055 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
29 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0030000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
30 | 1 | 15C | CC | 2412 | 2462 | 0.575 | |||||||||||||||||||||||||||||||||||
30 | 2 | 15C | CC MO | 2412 | 2462 | 0.774 | |||||||||||||||||||||||||||||||||||
30 | 3 | 15C | CC MO | 2422 | 2452 | 0.299 | |||||||||||||||||||||||||||||||||||
30 | 4 | 15C | CC | 5745 | 5825 | 0.39 | |||||||||||||||||||||||||||||||||||
30 | 5 | 15C | CC MO | 5745 | 5825 | 0.647 | |||||||||||||||||||||||||||||||||||
30 | 6 | 15C | CC MO | 5755 | 5795 | 0.711 | |||||||||||||||||||||||||||||||||||
30 | 7 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
31 | 1 | 15E | CC | 5180 | 5240 | 0.025 | |||||||||||||||||||||||||||||||||||
31 | 2 | 15E | CC MO | 5180 | 5240 | 0.017 | |||||||||||||||||||||||||||||||||||
31 | 3 | 15E | CC MO | 5190 | 5230 | 0.019 | |||||||||||||||||||||||||||||||||||
31 | 4 | 15E | CC | 5260 | 5320 | 0.055 | |||||||||||||||||||||||||||||||||||
31 | 5 | 15E | CC MO | 5260 | 5320 | 0.087 | |||||||||||||||||||||||||||||||||||
31 | 6 | 15E | CC MO | 5270 | 5310 | 0.101 | |||||||||||||||||||||||||||||||||||
31 | 7 | 15E | CC | 5500 | 5700 | 0.055 | |||||||||||||||||||||||||||||||||||
31 | 8 | 15E | CC MO | 5500 | 5700 | 0.094 | |||||||||||||||||||||||||||||||||||
31 | 9 | 15E | CC MO | 5510 | 5670 | 0.116 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
32 | 1 | 15B | CC | ||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
33 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0030000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
34 | 1 | 15C | CC | 2412 | 2462 | 0.575 | |||||||||||||||||||||||||||||||||||
34 | 2 | 15C | CC MO | 2412 | 2462 | 0.774 | |||||||||||||||||||||||||||||||||||
34 | 3 | 15C | CC MO | 2422 | 2452 | 0.299 | |||||||||||||||||||||||||||||||||||
34 | 4 | 15C | CC | 5745 | 5825 | 0.39 | |||||||||||||||||||||||||||||||||||
34 | 5 | 15C | CC MO | 5745 | 5825 | 0.647 | |||||||||||||||||||||||||||||||||||
34 | 6 | 15C | CC MO | 5755 | 5795 | 0.711 | |||||||||||||||||||||||||||||||||||
34 | 7 | 15C | CC | 2402 | 2480 | 0.003 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC