FCC ID: QDS-BRCM1019 802.11ag Wireless LAN PCI-E Mini Card

434155-001.fm Page 1 Monday, June 26, 2006 11:25 AM HP Broadband Wireless Getting Started Thank you for purchasing an HP Broadband Wireless computer with Built-in 3G broadband from Vodafone. Your new computer, when used with Built-in 3G broadband service, gives you the freedom to stay connected to the Internet, send e-mail, or connect to your corporate network whether you are on the road, across town, or just about anywhere.*

Before you can use Built-in 3G broadband from Vodafone (service purchased separately), you must activate service and install the preloaded software. You will be prompted to run the HP Broadband Wireless setup utility when you start the computer. To activate your Vodafone service and install the preloaded software, follow the instructions in the setup utility. To learn more about the benefits of your HP Broadband Wireless computer and Built-in 3G broadband, see the HP Web site at http://www.hp.com/broadbandwireless.

*Subject to coverage availability. Copyright 2006 Hewlett-Packard Development Company, L.P. VODAFONE and the Vodafone logos and Vodafone Mobile Connect are trade marks of the Vodafone Group. Other product and company names mentioned herein may be the trade marks of their respective owners. The information contained herein is subject to change without notice. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: September 2006 PRINTER: Replace this box with Printed- In (PI) Statement(s) as per spec. NOTE: This box is simply a placeholder. PI Statement(s) do not have to fit inside the box but should be placed in this area. 434155-001

435748-001.book Page i Thursday, December 7, 2006 10:17 AM Getting Started HP Business Notebook PC Document Part Number: 435748-001 March 2007 This guide explains how to set up your hardware and software, and begin using the computer in Windows. 435748-001.book Page ii Thursday, December 7, 2006 10:17 AM Copyright 2007 Hewlett-Packard Development Company, L.P. Windows is a U.S. registered trademark of Microsoft Corporation. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Getting Started HP Business Notebook PC First Edition: March 2007 Document Part Number: 435748-001 Product notice This user guide describes features that are common to most models. Some features may not be available on your computer. 435748-001.book Page iii Thursday, December 7, 2006 10:17 AM Contents 1 First-time setup Identifying required hardware . 11 Setting up the computer . 13 Step 1: Insert the battery . 14 Step 2: Connect the computer to external power. 15 Step 3: Turn on the computer . 16 Step 4: Set up the software . 18 Step 5: Create recovery discs (recommended) . 18 2 Quick tour Identifying required hardware . 21 Top components . 22 Front components . 23 Left-side components . 24 Right-side components . 25 Rear components . 26 Bottom components. 27 Wireless antennae (select models only). 28 Getting Started iii 435748-001.book Page iv Thursday, December 7, 2006 10:17 AM Contents 3 Next steps Protecting the computer . 31 Protecting the computer from viruses . 31 Protecting your system files . 32 Protecting your privacy . 32 Protecting the computer from power surges . 32 Using the computer safely . 33 Connecting to a computer network . 35 Installing additional hardware and software . 36 Identifying and installing hardware. 36 Locating and installing software . 36 Updating the software installed on the computer. 37 Finding the user guides . 38 Turning off the computer correctly . 38 4 Troubleshooting Troubleshooting resources . 41 Quick troubleshooting . 42 The computer is unable to start up. 42 The computer screen is blank . 43 Software is functioning abnormally . 44 The computer is turned on but not responding . 44 The computer is unusually warm. 45 An external device is not working. 46 The WLAN connection is not working . 46 Help and Support . 47 Contacting technical support . 48 A Connect to the Internet from your home Choosing an ISP. A1 Using the New Connection Wizard . A2 Choosing the type of Internet connection . A2 iv Getting Started 435748-001.book Page v Thursday, December 7, 2006 10:17 AM Contents B Backup and recovery Creating recovery discs . B1 Backing up your information . B2 When to back up . B2 Back up suggestions . B3 Backing up specific files or folders . B4 Backing up the entire hard drive . B4 Creating recovery points . B5 Scheduling backups . B6 Performing a recovery . B7 Performing a recovery from the recovery discs. B7 Performing a recovery from the hard drive . B7 C Specifications Operating environment. C1 Rated input power . C2 Index Getting Started v 435748-001.book Page vi Thursday, December 7, 2006 10:17 AM 435748-001.book Page 1 Thursday, December 7, 2006 10:17 AM 1 First-time setup Identifying required hardware To set up the computer for the first time, you will need the computer, the AC adapter, the power cord, and the primary battery. Components included with the computer may vary by region and by model. Getting Started 11 435748-001.book Page 2 Thursday, December 7, 2006 10:17 AM First-time setup Component 1 Power cord Component 4 Country-specific modem adapter

(select models only) 2 AC adapter 5 Modem cable (select models only)

(optional for setup) 3 Primary battery Use only the AC adapter provided with the computer or one approved for this computer. Unless you use dial-up networking, the modem cable is optional for setup. 12 Getting Started 435748-001.book Page 3 Thursday, December 7, 2006 10:17 AM First-time setup Setting up the computer Computer setup involves the following tasks:

1. Inserting the battery into the computer 2. Connecting the computer to external power The battery begins to charge. 3. Turning on the computer 4. Setting up the software 5. Creating recovery discs (recommended) Refer to Appendix B, Backup and recovery, for instructions. CAUTION: Reduce the risk of file corruption by observing the following practices during the hardware and software setup procedures:

Do not unplug the computer from external power. Do not shut down the computer or initiate Standby or Hibernation. Getting Started 13 435748-001.book Page 4 Thursday, December 7, 2006 10:17 AM First-time setup Step 1: Insert the battery To insert a primary battery:

1. Turn the computer upside down on a flat surface, with the battery bay toward you. 2. Slide the battery 1 into the battery bay until it is seated. The battery release latches 2 automatically lock the battery into place. 14 Getting Started 435748-001.book Page 5 Thursday, December 7, 2006 10:17 AM First-time setup Step 2: Connect the computer to external power Power cords and AC outlets vary in appearance by region and country. To connect the computer to external AC power:

1. Plug the AC adapter into the power connector 1 on the computer. 2. Plug the power cord into the AC adapter 2. 3. Plug the other end of the power cord into an AC outlet 3. Getting Started 15 435748-001.book Page 6 Thursday, December 7, 2006 10:17 AM First-time setup When the computer receives AC power, the battery begins to charge and the battery light (on the front of the computer) turns on. When the battery is fully charged, the battery light turns off. Leave the computer connected to external power until the battery is fully charged and the battery light turns off. A partially charged new battery can run the computer after software setup is complete, but battery charge displays will not be accurate until the new battery has been fully charged. Step 3: Turn on the computer To open the computer:

1. Slide the display release latch 1 to the right to release the display. 2. Raise the display 2. 16 Getting Started 435748-001.book Page 7 Thursday, December 7, 2006 10:17 AM First-time setup To turn on the computer:

Press the power button 1. The power light on the power button 2 turns on. Getting Started 17 435748-001.book Page 8 Thursday, December 7, 2006 10:17 AM First-time setup Step 4: Set up the software After the computer is turned on, it will go through software setup. Follow the on-screen instructions to set up the software. Note the following points:

After you respond to the setup prompt, you must complete the entire setup process without interruption. Setup time varies. During software setup, the computer may pause periodically for several minutes. These normal pauses are indicated by an hourglass icon. CAUTION: If you are prompted to select an operating system language before the Welcome to Windows page is displayed, choose carefully. On some models, the languages that you do not choose are deleted from the system and cannot be restored during software setup. To register the operating system and the computer during software setup, the computer must be connected by an RJ-45 (network) cable to an existing network that has access to the Internet. If you do not register during software setup, you can do so at any time after software setup is complete. For more information about connecting to the Internet, refer to Appendix A, Connect to the Internet from your home, in this guide. Step 5: Create recovery discs

(recommended) You can create a set of recovery discs of your full factory image using HP Backup and Recovery Manager. You can use the recovery discs to start up (boot) the computer and restore the operating system and software programs to factory settings in case of system failure or instability. Refer to Appendix B, Backup and recovery, for detailed instructions. 18 Getting Started 435748-001.book Page 1 Thursday, December 7, 2006 10:17 AM 2 Quick tour Identifying required hardware Components included with the computer may vary by region and model. The illustrations in this chapter identify the standard features included on most computer models. Getting Started 21 435748-001.book Page 2 Thursday, December 7, 2006 10:17 AM Quick tour Top components Component 1 Power button Component 9 Internal microphone

(select models only) 2 Power lights (2)

- TouchPad scroll zone 3 Info button

(select models only) q Fingerprint reader

(select models only) 4 Wireless button w Right TouchPad button 5 Wireless lights (2) e Left TouchPad button 6 Presentation button

(select models only) r Drive light 7 Volume mute button t Battery light 8 Volume scroll zone

(select models only) y TouchPad 22 Getting Started 435748-001.book Page 3 Thursday, December 7, 2006 10:17 AM Front components Quick tour Component 1 Wireless light 2 Power light 3 Battery light Component 4 Drive light 5 Speakers (2) 6 Display release latch Getting Started 23 435748-001.book Page 4 Thursday, December 7, 2006 10:17 AM Quick tour Left-side components Component Component 1 Power connector 5 Audio-in (microphone) jack 2 Vent 6 1394 port (select models only) 3 USB ports (2) 7 PC Card slot 4 Audio-out (headphone) jack 24 Getting Started 435748-001.book Page 5 Thursday, December 7, 2006 10:17 AM Right-side components Quick tour Component 1 Media Card Reader

(select models only) 2 USB ports (2)

(select models only) Component 3 Optical drive 4 RJ-11 (modem) jack Getting Started 25 435748-001.book Page 6 Thursday, December 7, 2006 10:17 AM Quick tour Rear components Component Component 1 Security cable slot 3 External monitor port 2 RJ-45 (network) jack 4 S-Video-out jack

(select models only) 26 Getting Started 435748-001.book Page 7 Thursday, December 7, 2006 10:17 AM Bottom components Quick tour Component 1 Bluetooth compartment

(select models only) 2 Vents (3) Component 6 Battery release latches (2) 7 Docking connector

(select models only) 3 Accessory battery connector 8 Memory module compartment 4 SIM slot (select models only) 9 WLAN module compartment

(select models only) 5 Battery bay

- Hard drive bay Getting Started 27 435748-001.book Page 8 Thursday, December 7, 2006 10:17 AM Quick tour Wireless antennae (select models only) Component Component 1 WLAN antennae (2)

(select models only)*

2 WWAN antenna

(select models only)*

*The antennae are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the antennae free from obstructions. 28 Getting Started 435748-001.book Page 1 Thursday, December 7, 2006 10:17 AM 3 Next steps Protecting the computer The information in this section explains how your computer can be protected from damage caused by a virus, a security breach, a power surge, unsafe operation, or system failure. Protecting the computer from viruses When you use the computer for e-mail, network, or Internet access, you expose it to computer viruses that can disable the operating system, applications, or utilities or cause them to function abnormally. Antivirus software can detect most viruses, destroy them, and in most cases, repair any damage they have caused. To provide ongoing protection against newly discovered viruses, antivirus software must be kept up to date. Norton Internet Security is preinstalled on the computer:

Your version of Norton Internet Security includes 60 days of free updates. It is strongly recommended that you protect the computer against new viruses beyond 60 days by purchasing extended update service. For information about using and updating Norton Internet Security and for purchasing extended update service, select Start > All Programs > Norton Internet Security > Help and Support. To access Norton Internet Security, select Start > All Programs > Norton Internet Security. Getting Started 31 435748-001.book Page 2 Thursday, December 7, 2006 10:17 AM Next steps Protecting your system files The HP Backup and Recovery Manager provides several ways to back up the system and to recover optimal system functionality. Refer to Appendix B, Backup and recovery, for additional information. Protecting your privacy When you use the computer for e-mail, network, or Internet access, it is possible for unauthorized persons to obtain information about you or the computer. To optimize the computers privacy protection features, observe these practices:

Keep the operating system and software updated. Many software updates contain security enhancements. Use a firewall. Firewall software monitors incoming traffic on the computer to block messages that do not meet specific security criteria. Some firewalls also monitor outgoing traffic. Protecting the computer from power surges To protect the computer from the power surges that may be caused by an uncertain power supply or an electrical storm, observe these practices:

Plug the computer power cord into an optional, high-quality surge protector. Surge protectors are available from most computer or electronics retailers. During an electrical storm, either run the computer on battery power or shut down the computer and unplug the power cord. If applicable to your location, provide surge protection on the modem cable that connects the modem to a telephone line. Telephone line surge protectors are available from most computer or electronic retailers in some regions. 32 Getting Started 435748-001.book Page 3 Thursday, December 7, 2006 10:17 AM Using the computer safely Next steps WARNING: To reduce the risk of electric shock or damage to your equipment, observe these practices:

Plug the power cord into an AC outlet that is easily accessible at all times. Disconnect power from the computer by unplugging the power cord from the AC outlet (not by unplugging the power cord from the computer). If provided with a 3-pin attachment plug on your power cord, plug the cord into a grounded (earthed) 3-pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an important safety feature. WARNING: To reduce the risk of serious injury, read the Safety and Comfort Guide. It describes proper workstation setup and proper posture, health, and work habits for computer users. The Safety and Comfort Guide also provides important electrical and mechanical safety information. This guide is available on the Web at http://www.hp.com/ergo and in Help and Support. To access the guide in Help and Support, select Start > Help and Support > User Guides. Getting Started 33 435748-001.book Page 4 Thursday, December 7, 2006 10:17 AM Next steps WARNING: To avoid potential discomfort or burns, do not block the air vents or place the computer on your lap for extended periods. Also, do not allow the AC adapter to contact the skin for extended periods during operation. The computer is designed to run demanding applications at full power. As a result of increased power consumption, it is normal for the computer and the AC adapter to feel warm or hot when used continuously. The computer and the AC adapter comply with the user-accessible surface temperature limits defined by the International Standard for Safety of Information Technology Equipment

(IEC 60950). WARNING: To reduce potential safety issues, use only the AC adapter or battery provided with the computer, a replacement AC adapter or battery provided by HP, or a compatible AC adapter or battery purchased as an accessory from HP. For more safety and regulatory information, and for battery disposal information, refer to the Regulatory, Safety and Environmental Notices located in Help and Support. To access the notices in Help and Support, select Start > Help and Support >

User Guides. 34 Getting Started 435748-001.book Page 5 Thursday, December 7, 2006 10:17 AM Next steps Connecting to a computer network The computer may have the following networking capabilities:

Local area network (LAN) Wireless local area network (WLAN) Wireless wide area network (WWAN) Bluetooth If you plan to connect the computer to a home office LAN or WLAN, refer to Help and Support for information on networking. If you need assistance to connect to a company LAN or WLAN, contact your network administrator. The computer display must be open before you can connect to a wireless network. For information on activating broadband wireless service, refer to the mobile network operator information included with your computer. If the computer has a Bluetooth device, you can create a personal area network (PAN) to connect to other Bluetooth-enabled devices, such as computers, telephones, printers, headsets, speakers, and cameras. For information on using a Bluetooth device, refer to Bluetooth online Help. For information on connecting the computer to the Internet, refer to Appendix A, Connect to the Internet from your home. Getting Started 35 435748-001.book Page 6 Thursday, December 7, 2006 10:17 AM Next steps Installing additional hardware and software Identifying and installing hardware To see a list of hardware installed on the computer, follow these steps:

1. Select Start > My Computer. 2. In the left pane of the System Tasks window, click View system information. 3. Select Hardware tab > Device Manager. You can also modify your device configurations using Device Manager. To install additional hardware, such as an optional printer, follow the instructions provided by the hardware manufacturer to install the device and any required drivers. Locating and installing software The computer includes software that is provided in the following forms:

Preinstalled on your hard drive. To see a list of the ready-to-use software preinstalled on the computer, follow these steps:

1. Click Start > All Programs. 2. Click the program you want to open. 36 Getting Started 435748-001.book Page 7 Thursday, December 7, 2006 10:17 AM Next steps Provided on a CD or DVD. To install a software program from a disc, follow these steps:

1. Insert the disc into your optical drive. 2. When the installation wizard opens, follow the on-screen instructions. 3. Restart the computer if prompted to do so. Preloaded software. This is software provided on the hard drive but not ready to use. To locate or install preloaded software or drivers, follow these steps:

1. Select Start > All Programs > Software Setup. 2. Follow the on-screen instructions and select the check box next to the software program or driver you want to install. For details about using software included with the computer, refer to the software manufacturers instructions, which may be provided on disc, as online Help files, or on the manufacturers Web site. Updating the software installed on the computer Most software, including the operating system, is updated frequently by the manufacturer or provider. Important updates to the software included with the computer may have been released since the computer left the factory. Some updates may affect the way the computer responds to optional software or external devices. Many updates provide security enhancements. Update the operating system and other software provided on the computer as soon as the computer is connected to the Internet. To access update links for the operating system and other software provided on the computer, select Start > Help and Support. Getting Started 37 435748-001.book Page 8 Thursday, December 7, 2006 10:17 AM Next steps Finding the user guides User guides, regulatory and safety notices, and other information resources about using the computer are available through Help and Support. To access the user guides:

Select Start > Help and Support > User Guides. Turning off the computer correctly Whenever possible, turn off the computer by using the standard shutdown procedure:

1. Save your work and close all open applications. 2. Shut down the computer through the operating system by selecting Start > Turn Off Computer > Turn Off. If you have been registered to a network domain, the button you click will be called Shut Down instead of Turn Off Computer. If you are unable to turn off the computer with these procedures, try the following emergency shutdown procedures in the sequence provided:

CAUTION: Using one of the following emergency shutdown procedures will result in the loss of unsaved information. Press ctrl+alt+delete. Then, select Shut Down > Turn Off. Press and hold the power button for at least 5 seconds. Disconnect the computer from external power and remove the battery. 38 Getting Started 435748-001.book Page 1 Thursday, December 7, 2006 10:17 AM 4 Troubleshooting Troubleshooting resources If you experience computer problems, perform these troubleshooting steps in the order provided until the problem is resolved:

Refer to Quick troubleshooting, the next section in this chapter. Access additional information about the computer and Web site links through Help and Support. Select Start > Help and Support. Although many checkup and repair tools require an Internet connection, other tools can help you fix a problem when the computer is offline. Contact technical support for further assistance. Getting Started 41 435748-001.book Page 2 Thursday, December 7, 2006 10:17 AM Troubleshooting Quick troubleshooting The computer is unable to start up To turn on the computer, press the power button. When the computer is turned on, the power light turns on. If the computer and the power light are not turned on when you press the power button, adequate power may not be available to the computer. The following suggestions may help you determine why the computer will not start up:

If the computer is plugged into an AC outlet, be sure that the AC outlet is providing adequate power by plugging another electrical device into the outlet. If the power light on the front of the computer is blinking rapidly, replace the AC adapter with one having a higher power rating, and then plug the adapter into an AC outlet. Use only the AC adapter provided with the computer or one approved for this computer. If the computer is running on battery power or is plugged into an external power source other than an AC outlet, plug the computer into an AC outlet using the AC adapter. Be sure the power cord and AC adapter connections are secure. If the computer is running on battery power, try the following procedures in the sequence provided:

If the battery light on the front of the computer is blinking, the battery has reached a low battery level, which may not allow the computer to start up. Plug the computer into an AC outlet using the AC adapter, start the computer, and allow the battery to charge. Remove the primary battery and optional accessory battery (if applicable) and plug the computer into an AC outlet using the AC adapter. If you can turn the computer on, one of the batteries may need to be replaced. 42 Getting Started 435748-001.book Page 3 Thursday, December 7, 2006 10:17 AM The computer screen is blank Troubleshooting If the computer is on but the screen is blank: the computer may be in Standby or in Hibernation; the computer may not be set to display the image on the computer screen; or the display switch may not be functioning properly. Try the following suggestions to resolve the issue:

To exit Standby or Hibernation, briefly press the power button. Standby and Hibernation are energy-saving features that can turn off the display. Standby and Hibernation can be initiated by the system while the computer is on but not in use, or when the computer has reached a low battery level. To change these and other power settings, select Start > Control Panel

> Performance and Maintenance > Power Options. To transfer the image to the computer screen, press fn+f4. On most models, when an optional external display device, such as a monitor, is connected to the computer, the image can be displayed on the computer screen or the external display, or on both devices simultaneously. When you press fn+f4 repeatedly, the image alternates among the computer display, one or more external display devices, and simultaneous display on all devices. Press the display switch on the computer to be sure that it moves freely. The display switch is normally located on the upper-left corner of the keyboard. Getting Started 43 435748-001.book Page 4 Thursday, December 7, 2006 10:17 AM Troubleshooting Software is functioning abnormally Follow these suggestions if the software becomes unresponsive or responds abnormally:

Restart the computer:

In Windows XP Home, select Start > Turn Off Computer > Restart. In Windows XP Professional, select Start > Turn Off Computer > Restart > OK. (If you have been registered to a domain, the button you click will be called Shut Down instead of Turn Off Computer.) If you cannot restart the computer using these procedures, refer to the next section, The computer is turned on but not responding. Run a virus scan. For information about using the antivirus resources on the computer, refer to Protecting the computer from viruses in Chapter 3, Next steps. The computer is turned on but not responding If the computer is turned on, but not responding to software or keyboard commands, turn off the computer by using the standard shutdown procedure:

1. Save your work and close all open applications. 2. Shut down the computer through the operating system by selecting Start > Turn Off Computer > Turn Off. If you have been registered to a network domain, the button you click will be called Shut Down instead of Turn Off Computer. 44 Getting Started 435748-001.book Page 5 Thursday, December 7, 2006 10:17 AM Troubleshooting If you are unable to shut down the computer with these procedures, try the following emergency shutdown procedures in the sequence provided:

CAUTION: Using one of the following emergency shutdown procedures will result in the loss of unsaved information. Press ctrl+alt+delete. Then, select Shut Down > Turn Off. Press and hold the power button for at least 5 seconds. Disconnect the computer from external power and remove the battery. The computer is unusually warm It is normal for the computer to feel warm to the touch while it is in use. But if the computer feels unusually warm, it may be overheating because a vent is blocked. If you suspect that the computer is overheating, allow the computer to cool to room temperature. Then be sure to keep all vents free from obstructions while you are using the computer. CAUTION: To prevent overheating, do not obstruct vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as such as an adjoining printer, or a soft surface, such as pillows or thick rugs or clothing, to block airflow. The fan in the computer starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. Getting Started 45 435748-001.book Page 6 Thursday, December 7, 2006 10:17 AM Troubleshooting An external device is not working Follow these suggestions if an external device does not function as expected:

Turn on the device as instructed in the device user guide. Some devices may not be powered by the computer, and must be turned on before the computer is turned on. Be sure that all device connections are secure. Be sure that the device is receiving electrical power. Be sure that the device, especially if it is an older one, is compatible with your operating system. For compatibility information, refer to the device manufacturers Web site. Be sure that the correct drivers are installed and updated. Drivers may be available on a disc included with the device or on the device manufacturers Web site. For more information about updating drivers, select Start > Help and Support. The WLAN connection is not working If a WLAN connection is not working as expected, follow these suggestions:

Be sure that the wireless light on the computer is on. If the light is off, press the wireless button to turn it on. Be sure that the computer wireless antennae are free from obstructions. Be sure that the cable or DSL modem and its power cord are properly connected, and the lights are on. 46 Getting Started 435748-001.book Page 7 Thursday, December 7, 2006 10:17 AM Troubleshooting If applicable, be sure that the wireless router (access point) is turned on and properly connected to the DSL or cable modem. Disconnect and then reconnect all cables, and turn the power off and then back on. For information on setting up a home wireless network connection, visit http://www.hp.com/go/techcenter/wireless

(English only). For information on activating broadband wireless service, refer to the mobile network operator information included with your computer. Help and Support If the preceding questions and solutions did not address your problem, access Help and Support by selecting Start > Help and Support. Help and Support provides the following assistance:

Information about the computer, such as model and serial number, installed software, hardware components, and specifications Answers to questions about using the computer Product information to help you learn to use the computer and operating system features Updates for the operating system, device drivers, and software provided on the computer Checkups for computer functionality Automated and interactive troubleshooting, repair solutions, and system recovery procedures Links to community forums of IT experts Getting Started 47 435748-001.book Page 8 Thursday, December 7, 2006 10:17 AM Troubleshooting Contacting technical support If the computer is connected to the Internet, select Start > Help and Support > Contact support to get online help or to access the technical support telephone numbers. For the fastest possible resolution of your problem, have the computer and the following information available when you call or e-mail:

Product name located on the display or keyboard. Serial number (s/n) listed on the service tag. The service tag label is on the bottom of the computer. To display the service tag information on the computer screen, select Start > Help and Support > My HP Computer. Date the computer was purchased. Conditions under which the problem occurred. Error messages that have been displayed. The manufacturer and model of the printer or other accessories connected to the computer. Operating system version number and registration number. To display the operating system version number and registration number, select Start > Help and Support >

My HP Computer. (On some models, the registration number may be identified in the Operating System table as the Product Id). 48 Getting Started 435748-001.book Page 1 Thursday, December 7, 2006 10:17 AM A Connect to the Internet from your home The computer includes hardware and software that allows you to connect to the Internet. Before you can access the Internet, you must choose an Internet service provider (ISP) and choose the type of Internet connection you want, such as broadband (wired or wireless) or dial-up. Internet hardware and software features vary depending on the computer model and your location. Choosing an ISP You must set up Internet service before you can connect to the Internet. The computer includes the New Connection Wizard to help you set up a new Internet account or configure the computer to use an existing account. Getting Started A1 435748-001.book Page 2 Thursday, December 7, 2006 10:17 AM Connect to the Internet from your home Using the New Connection Wizard The New Connection Wizard works under the following conditions:

You already have an account with an ISP. You have a disc from an ISP. You do not have an Internet account and would like to select an ISP from the list provided within the wizard. You have selected an unlisted ISP and the ISP has provided you with such information as a specific IP address and POP3 and SMTP settings. To access the New Connection Wizard, select Start > Help and Support. If you are prompted within the wizard to choose between enabling or disabling the Windows Firewall, choose to enable the firewall. Choosing the type of Internet connection There are 3 basic types of Internet connection:

Broadband serviceHigh-speed Internet access is provided by an ISP through one of the following services:

Cable modem Digital Subscriber Line (DSL) Satellite Other services Broadband service may require additional hardware and/or software provided by the ISP. A2 Getting Started 435748-001.book Page 3 Thursday, December 7, 2006 10:17 AM Connect to the Internet from your home WLANInternet connection through a WLAN requires broadband wired service with an ISP as well as a wireless router (purchased separately). To learn about setting up wireless access, see the HP Web site at http://www.hp.com/go/techcenter/wireless (English only). WWANThis broadband wireless connection allows your computer to stay connected to the Internet over large geographic areas while the computer is in motion, such as in a car or train. WWAN capability requires an integrated HP Broadband Wireless Module (select models only) and service from a mobile network operator. For information on activating broadband wireless service, refer to the mobile network operator information included with your computer or see the HP Web site at http://www.hp.com/go/broadbandwireless

(English only). Dial-upYou can access the Internet by dialing in to a service provider using a modem cable connected to the RJ-11

(modem) jack. Getting Started A3 435748-001.book Page 4 Thursday, December 7, 2006 10:17 AM 435748-001.book Page 1 Thursday, December 7, 2006 10:17 AM B Backup and recovery Creating recovery discs After setting up the computer for the first time, be sure to create a set of recovery discs of the full factory image. The recovery discs are used to start up (boot) the computer and recover the operating system and software to factory settings in case of system instability or failure. Note the following guidelines before creating recovery discs:

You will need high-quality CD-R, DVD-R, or DVD+R media (purchased separately). Formatted DVDRW discs and DVDRW double-layer discs are not compatible with HP Backup and Recovery Manager. The computer must be connected to AC power during the process. Only one set of recovery discs can be created per computer. Number each disc before inserting it into the optical drive of the computer. If necessary, you can cancel the disc creation before you have finished creating the recovery discs. The next time you select Create factory software recovery CDs or DVDs to recover the system (Highly recommended), you will be prompted to continue the disc creation. Getting Started B1 435748-001.book Page 2 Thursday, December 7, 2006 10:17 AM Backup and recovery To create a set of recovery discs, follow these steps:

1. Select Start > All Programs > HP Backup & Recovery >

HP Backup and Recovery Manager. 2. Click Next. 3. Click Create factory software recovery CDs or DVDs to recover the system (Highly recommended), and then click Next. 4. Follow the on-screen instructions. Backing up your information You can only recover files that you have previously back up. HP recommends that you use HP Backup and Recovery Manager to create an entire drive backup as soon as you set up your computer. With HP Backup and Recovery Manager, you can perform the following tasks:

Backup up your information regularly to protect your important system files Creating system recovery points that allow you to reverse undesirable changes to your computer by restoring the computer to an earlier state Scheduling backups at specific intervals or events When to back up On a regularly scheduled basis Set reminders to back up your information periodically. Before the computer is repaired or restored Before you add or modify hardware or software B2 Getting Started AppB.fm Page 3 Thursday, December 7, 2006 10:57 AM Backup and recovery Back up suggestions Create a set of recovery discs using HP Backup and Recovery Manager. Create system recovery points using HP Backup and Recovery Manager, and periodically copy them to disc. Store personal files in the My Documents folder and back up these folders periodically. Back up templates stored in their associated programs. Save customized settings in a window, toolbar, or menu bar by taking a screen shot of your settings. The screen shot can be a time saver if you have to reset your preferences. To copy the screen and paste it into a word-processing document:

1. Display the screen. 2. Copy the screen. To copy only the active window, press alt+fn+prt sc. To copy the entire screen, press fn+prt sc. 3. Open a word-processing document, and then select Edit >

Paste. Before you can perform backup and recovery procedures, the computer must be connected to external power. Drivers, utilities, and applications installed by HP can be copied to a CD or to a DVD using HP Backup and Recovery Manager. Getting Started B3 435748-001.book Page 4 Thursday, December 7, 2006 10:17 AM Backup and recovery Backing up specific files or folders You can back up specific files or folders to the recovery partition on the hard drive, to an optional external hard drive, or to optical discs (CDs or DVDs). This process will take several minutes, depending on the file size and the speed of the computer. To back up specific files or folders:

1. Select Start > All Programs > HP Backup & Recovery >

HP Backup and Recovery Manager. 2. Click Next. 3. Click Back up to protect system settings and important data files, and then click Next. 4. Click Back up individual files and folders and then click Next. 5. Follow the on-screen instructions. Backing up the entire hard drive When you perform a complete backup of the hard drive, you are saving the full factory image, including the Windows operating system, software applications, and all personal files and folders. A copy of the entire hard drive image can be stored on another hard drive, on a network drive, or on recovery discs that you create. This process may take over an hour, depending on your computer speed and the amount of data being stored. B4 Getting Started 435748-001.book Page 5 Thursday, December 7, 2006 10:17 AM Backup and recovery To back up your entire hard drive:

1. Select Start > All Programs > HP Backup & Recovery >

HP Backup and Recovery Manager. 2. Click Next. 3. Click Back up to protect system settings and important data files, and then click Next. 4. Follow the on-screen instructions. Creating recovery points When you back up modifications since your last backup, you are creating system recovery points. This allows you to save a snapshot of your hard drive at a specific point in time. You can then recover back to that point if you want to reverse subsequent changes made to your system. The first system recovery point, a snapshot of the entire image, is automatically created the first time you perform a backup. Subsequent recovery points make a copy of changes made after that time. HP recommends that you create recovery points at the following times:

Before you add or extensively modify software or hardware Periodically, whenever the system is performing optimally Recovering to an earlier recovery point does not affect data files or e-mails created since that recovery point. Getting Started B5 435748-001.book Page 6 Thursday, December 7, 2006 10:17 AM Backup and recovery To create a system recovery point:

1. Select Start > All Programs > HP Backup & Recovery >

HP Backup and Recovery Manager. 2. Click Next. 3. Click Back up to protect system settings and important data files, and then click Next. 4. Click Create or manage Recovery Points, and then click Next. 5. Follow the on-screen instructions. Scheduling backups Use HP Backup Scheduler to schedule backups for the entire system, for recovery points, or for specific files and folders. With this tool, you can schedule backups at specific intervals (daily, weekly, or monthly) or at specific events, such as system restart or when you dock to an optional docking station (select models only). To schedule backups:

1. Select Start > All Programs > HP Backup & Recovery >

HP Backup Scheduler. 2. Follow the on-screen instructions. B6 Getting Started 435748-001.book Page 7 Thursday, December 7, 2006 10:17 AM Backup and recovery Performing a recovery You can only recover files that you have previously backed up. HP recommends that you use HP Backup and Recovery Manager to create an entire drive backup as soon as you set up your computer. HP Backup and Recovery Manager helps you with the following tasks for safeguarding your information and restoring it in case of a system failure:

Recovering important filesThis feature helps you reinstall important files without performing a full system recovery. Performing a full system recoveryWith HP Backup and Recovery Manager, you can recover your full factory image if you experience system failure or instability. HP Backup and Recovery Manager works from a dedicated recovery partition on the hard drive or from recovery discs you create. Performing a recovery from the recovery discs To perform a recovery from the recovery discs, follow these steps:

1. Back up all personal files. 2. Insert the first recovery disc into the optical drive and restart the computer. 3. Follow the on-screen instructions. Performing a recovery from the hard drive There are 2 ways to initiate a recovery from the hard drive:

From within Windows From the recovery partition Getting Started B7 435748-001.book Page 8 Thursday, December 7, 2006 10:17 AM Backup and recovery Initiating a recovery in Windows To initiate a recovery in Windows, follow these steps:

1. Back up all personal files. 2. Select Start > All Programs > HP Backup & Recovery >

HP Backup and Recovery Manager. 3. Click Next. 4. Click Recover important files or the entire system, and then click Next. 5. Follow the on-screen instructions. Initiating a recovery from the hard drive recovery partition To initiate a recovery from the hard drive recovery partition, follow these steps:

1. Back up all personal files. 2. Restart the computer, and then press f11 before the Windows operating system loads. 3. Click a recovery option, and then click Next. 4. Follow the on-screen instructions. B8 Getting Started 435748-001.book Page 1 Thursday, December 7, 2006 10:17 AM C Specifications Operating environment The operating environment information in the following table may be helpful if you plan to use or transport the computer in extreme environments. Factor Temperature Metric U.S. Operating (not writing to optical disc) 0C to 35C Operating (writing to optical disc) 5C to 35C 32F to 95F 41F to 95F Nonoperating

-20C to 60C

-4F to 140F Relative humidity (noncondensing) Operating Nonoperating 10% to 90%

10% to 90%

5% to 95%

5% to 95%

Maximum altitude (unpressurized) Operating (14.7 to 10.1 psia*)

-15 m to 3,048 m -50 ft to 10,000 ft Nonoperating (14.7 to 4.4 psia*)

-15 m to 12,192 m -50 ft to 40,000 ft

*Pounds per square inch absolute (psia) is a unit of measurement for altitude. Getting Started C1 435748-001.book Page 2 Thursday, December 7, 2006 10:17 AM Specifications Rated input power The power information in this section may be helpful if you plan to travel internationally with the computer. The computer operates on DC power, which can be supplied by an AC or a DC power source. Although the computer can be powered from a standalone DC power source, it should be powered only with an AC adapter or a DC power source supplied and approved by HP for use with this computer. The computer is capable of accepting DC power within the following specifications. Input power Operating voltage Operating current Rating 18.5 V dc @ 3.5 A - 65 W 3.5 A This product is designed for IT power systems in Norway with phase-to-phase voltage not exceeding 240 V rms. C2 Getting Started 435748-001.book Page 1 Thursday, December 7, 2006 10:17 AM Index Bluetooth 35 Bluetooth compartment, identifying 27 buttons info 22 power 17, 22 presentation 22 TouchPad 22 volume mute 22 wireless 22 C cables and cords, power 42 compartments Bluetooth 27 memory module 27 WLAN 27 computer turn off 38 turn on 16 computer viruses 44 connecting the computer to external power 15 connecting to a computer network 35 1394 port, identifying 24 A AC adapter identifying 12 using 15 accessory battery connector, identifying 27 altitude specifications C1 antivirus software 44 audio-in (microphone) jack, identifying 24 audio-out (headphone) jack, identifying 24 B battery charging 16 indentifying 12 inserting 14 battery bay, identifying 27 battery light behavior 16 identifying 22, 23 battery release latch, identifying 27 bays battery 27 hard drive 27 Getting Started Index1 435748-001.book Page 2 Thursday, December 7, 2006 10:17 AM Index connectors accessory battery 27 docking 27 power 24 country-specific modem adapter 12 D devices, external, troubleshooting 46 display release latch, identifying 23 display, switching image 43 docking connector, identifying 27 drive light, identifying 22, 23 E environmental specifications C1 external devices, troubleshooting 46 external monitor port, identifying 26 F fingerprint reader, identifying 22 firewalls 32 H hard drive bay, identifying 27 Help and Support 47 Hibernation 43 humidity specifications C1 I IEC 60950 compliance 34 image, switching among display devices 43 info button, identifying 22 inserting the battery 14 internal microphone, identifying 22 Internet access A2 J jacks audio-in (microphone) 24 audio-out (headphone) 24 RJ-11 (modem) 25 RJ-45 (network) jack 26 S-Video-out 26 L labels, service tag 48 LAN (local area network) 35 latches battery release 27 display release 23 lights battery 16, 22, 23 drive 22, 23 power 17, 22, 23 wireless 22, 23 locating user guides 38 M Media Card Reader, identifying 25 memory module compartment, identifying 27 Index2 Getting Started 435748-001.book Page 3 Thursday, December 7, 2006 10:17 AM Index power cord connecting 15 identifying 12 power light 17, 42 power lights, identifying 22, 23 power surge 32 presentation button, identifying 22 printer 46 Product Id 48 R rated input power specifications C2 registration number, operating system 48 regulatory information notices 34 Regulatory, Safety and Envi-

ronmental Notices 34 RJ-11 (modem) jack, identifying 25 RJ-45 (network) jack 26 S Safety and Comfort Guide 33 scroll zone, TouchPad 22 serial number, computer 48 service tag 48 seurity cable slot, identifying 26 SIM slot, identifying 27 slot, SIM 27 modem setting up Internet service A2 surge protection 32 modem cable 12 monitor, external 43, 46 N network jack 26 network, connecting computer to 35 New Connection Wizard A2 O operating environment specifications C1 operating system, version number 48 optical drive, identifying 25 overheating, computer 34, 45 P PC Card slot, identifying 24 ports 1394 24 external monitor 26 USB 24, 25 power running the computer on battery 16 turning on computer 17, 42 power button, identifying 22 power connector identifying 24 using 15 Getting Started Index3 435748-001.book Page 4 Thursday, December 7, 2006 10:17 AM Index software antivirus 31 setup 18 updates 37 speakers, identifying 23 specifications operating environment C1 rated input power C2 Standby 43 S-Video-out jack, identifying 26 T technical support 48 temperature safety considerations 34 specifications C1 troubleshooting 45 TouchPad buttons, identifying 22 TouchPad scroll zone, identifying 22 TouchPad, identifying 22 traveling with computer C2 troubleshooting display problems 43 external device problems 46 Hibernation or Standby problems 43 overheating problems 45 resources 41 software problems 44 virus problems 44 wireless network problems 46 turning off computer 38 turning on computer 16, 42 U updates, software 37 USB ports, identifying 24, 25 user guides 38 V vents identifying 24, 27 precautions 45 viruses antivirus software 31 computer 44 volume mute button, identifying 22 volume scroll zone, identifying 22 W wireless button, identifying 22 wireless lights, identifying 22, 23 WLAN (wireless local area network) 35 WLAN antennae, identifying 28 WLAN module compartment 27 WWAN (wireless wide area network) 35 WWAN antenna 28 Index4 Getting Started

Notebook Tour User Guide Copyright 2007 Hewlett-Packard Development Company, L.P. Windows is a U.S. registered trademark of Microsoft Corporation. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. SD Logo is a trademark of its proprietor. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: March 2007 Document Part Number: 435751-001 Product notice This user guide describes features that are common to most models. Some features may not be available on your computer. ENWW iii iv Product notice ENWW Table of contents 1 Identifying Hardware 2 Components Top components ................................................................................................................................... 3 TouchPad ............................................................................................................................ 3 Lights ................................................................................................................................... 4 Buttons, switches, and fingerprint reader ............................................................................ 7 Keys ..................................................................................................................................... 9 Front components .............................................................................................................................. 10 Rear components ............................................................................................................................... 11 Right-side components ....................................................................................................................... 12 Left-side components ......................................................................................................................... 13 Bottom components ........................................................................................................................... 14 Wireless antennae (select models only) ............................................................................................. 15 Additional hardware components ....................................................................................................... 16 3 Labels Index ................................................................................................................................................................... 18 ENWW v vi ENWW 1 Identifying Hardware To see a list of hardware installed in the computer, follow these steps:

1. 2. 3. Select Start > My Computer. In the left pane of the System Tasks window, select View system information. Select Hardware tab > Device Manager. You can also add hardware or modify device configurations using Device Manager. ENWW 1 2 Components 2 Chapter 2 Components ENWW Top components TouchPad Component

(1)

(2)

(3)

(4) TouchPad*

Left TouchPad button*

Right TouchPad button*

TouchPad scroll zone*

Description Moves the pointer and selects or activates items on the screen. Functions like the left button on an external mouse. Functions like the right button on an external mouse. Scrolls up or down.

*This table describes factory settings. To view or change pointing device preferences, select Start > Control Panel > Printers and Other Hardware > Mouse. ENWW Top components 3 Lights NOTE: Refer to the illustration that most closely matches your computer. Component

(1) Power lights (2)*

(2) Wireless lights (2)

(3)

(4)

(5)

(6)

(7) Caps lock light Num lock light Volume mute light Volume down light Volume up light Description On: The computer is on. Blinking: The computer is in Standby. Blinking rapidly: An AC adapter with a higher power rating should be connected. Off: The computer is off or in Hibernation. On: An integrated wireless device, such as a wireless local area network (WLAN) device, the HP Broadband Wireless Module, and/or a Bluetooth device, is on. Off: All wireless devices are off. On: Caps lock is on. On: Num lock is on or the embedded numeric keypad is enabled. Off: Computer sound is on. On: Computer sound is off. Blinking: The volume scroll zone is being used to decrease speaker volume. Blinking: The volume scroll zone is being used to increase speaker volume. 4 Chapter 2 Components ENWW Component

(8) Battery light

(9) Drive light Description Amber: A battery is charging. Green: A battery is close to full charge capacity. Blinking amber: A battery that is the only available power source has reached a low battery level. When the battery reaches a critical battery level, the battery light begins blinking rapidly. Off: If the computer is plugged into an external power source, the light turns off when all batteries in the computer are fully charged. If the computer is not plugged into an external power source, the light stays off until the battery reaches a low battery level. Blinking green: The hard drive or optical drive is being accessed. Amber: HP 3D DriveGuard has temporarily parked the internal hard drive.

*The 2 power lights display the same information. The light on the power button is visible only when the computer is open. The power light on the front of the computer is visible whether the computer is open or closed. The 2 wireless lights display the same information. The light on the wireless button is visible only when the computer is open. The wireless light on the front of the computer is visible whether the computer is open or closed. ENWW Top components 5 Component

(1) Power lights (2)*

(2) Wireless lights (2)

(3)

(4)

(5) Caps lock light Num lock light Battery light Description On: The computer is on. Blinking: The computer is in Standby. Blinking rapidly: An AC adapter with a higher power rating should be connected. Off: The computer is off or in Hibernation. On: An integrated wireless device, such as a wireless local area network (WLAN) device, the HP Broadband Wireless Module, and/or Bluetooth device, is on. Off: All wireless devices are off. On: Caps lock is on. Blinking: Num lock is on or the embedded numeric keypad is enabled. On: A battery is charging. Green: A battery is close to full charge capacity. Blinking amber: A battery that is the only available power source has reached a low battery level. When the battery reaches a critical battery level, the battery light begins blinking rapidly. Off: If the computer is plugged into an external power source, the light turns off when all batteries in the computer are fully charged. If the computer is not plugged into an external power source, the light stays off until the battery reaches a low battery level.

(6) Drive light Blinking green: The hard drive or optical drive is being accessed.

*The 2 power lights display the same information. The light on the power button is visible only when the computer is open. The power light on the front of the computer is visible whether the computer is open or closed. The 2 wireless lights display the same information. The light on the wireless button is visible only when the computer is open. The wireless light on the front of the computer is visible whether the computer is open or closed. 6 Chapter 2 Components ENWW Buttons, switches, and fingerprint reader NOTE: Refer to the illustration that most closely matches your computer. Component

(1) Power button Internal display switch Info button Wireless button

(2)

(3)

(4)

(5)

(6) Description When the computer is off, press the button to turn on the computer. When the computer is on, press the button to shut down the computer. When the computer is in Standby, press the button briefly to exit Standby. When the computer is in Hibernation, press the button briefly to exit Hibernation. If the computer has stopped responding and Windows shutdown procedures are ineffective, press and hold the power button for at least 5 seconds to turn off the computer. To learn more about your power settings, select Start > Control Panel > Performance and Maintenance > Power Options. Turns off the display if the display is closed while the power is on. Launches Info Center, which enables you to open various software solutions. Turns the wireless feature on or off, but does not establish a wireless connection. NOTE: A wireless network must be set up in order to establish a wireless connection. Presentation button Volume mute button Starts the presentation feature. Mutes and restores speaker sound. ENWW Top components 7 Component

(7) Volume scroll zone

(8)

(9) Internal microphone Fingerprint reader Description Adjusts speaker volume. Slide your finger to the left to decrease volume and to the right to increase volume. You can also tap the minus sign on the scroll zone to decrease volume, or tap the plus sign on the scroll zone to increase volume. Records sound. Allows a fingerprint logon to Windows, instead of a password logon. Component

(1) Power button

(2)

(3) Internal display switch Wireless button Description When the computer is off, press the button to turn on the computer. When the computer is on, press the button to shut down the computer. When the computer is in Standby, press the button briefly to exit Standby. When the computer is in Hibernation, press the button briefly to exit Hibernation. If the computer has stopped responding and Windows shutdown procedures are ineffective, press and hold the power button for at least 5 seconds to turn off the computer. To learn more about your power settings, select Start > Control Panel > Performance and Maintenance > Power Options. Turns off the display if the display is closed while the power is on. Turns the wireless feature on or off, but does not create a wireless connection. NOTE: A wireless network must be set up in order to establish a wireless connection. 8 Chapter 2 Components ENWW Keys NOTE: Your computer may look slightly different from the illustration in this section. Component Description

(1)

(2)

(3)

(4)

(5)

(6) esc key fn key Displays system information when pressed in combination with the fn key. Executes frequently used system functions when pressed in combination with a function key or the esc key. Windows logo key Displays the Windows Start menu. Windows applications key Displays a shortcut menu for items beneath the pointer. Embedded numeric keypad keys Can be used like the keys on an external numeric keypad. Function keys Execute frequently used system functions when pressed in combination with the fn key. ENWW Top components 9 Front components Component

(1) Wireless light

(2) Power light

(3) Battery light

(4) Drive light Description On: An integrated wireless device, such as a wireless local area network (WLAN) device, the HP Broadband Wireless Module, and/or a Bluetooth device, is on. Off: All wireless devices are off. On: The computer is on. Blinking: The computer is in Standby. Blinking rapidly: An AC adapter with a higher power rating should be connected. Off: The computer is off or in Hibernation. Amber: A battery is charging. Green: A battery is close to full charge capacity. Blinking amber: A battery that is the only available power source has reached a low battery level. When the battery reaches a critical battery level, the battery light begins blinking rapidly. Off: If the computer is plugged into an external power source, the light turns off when all batteries in the computer are fully charged. If the computer is not plugged into an external power source, the light stays off until the battery reaches a low battery level. Blinking green: The hard drive or optical drive is being accessed. Amber (select models only): HP 3D DriveGuard has temporarily parked the hard drive.

(5)

(6) Speakers Display release latch Produce sound. Opens the computer. 10 Chapter 2 Components ENWW Rear components Component Description

(1) Security cable slot Attaches an optional security cable to the computer. NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen.

(2)

(3)

(4) RJ-45 (network) jack External monitor port Connects a network cable. Connects an external VGA monitor or projector. S-Video-out jack (select models only) Connects an optional S-Video device such as a television, VCR, camcorder, overhead projector, or video capture card. ENWW Rear components 11 Right-side components Component Description

(1) Media Card Reader (select models only) Supports the following optional digital card formats: Secure Digital

(SD) Memory Card, MultiMediaCard (MMC), Memory Stick (MS), Memory Stick Pro (MSPro), Memory Stick Duo Adapter, xD-Picture Card (XD).

(2)

(3)

(4) USB ports (2) (select models only) Connect an optional USB device. Optical drive RJ-11 (modem) jack Reads an optical disc. Connects a modem cable. 12 Chapter 2 Components ENWW Left-side components Component Description

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8) PC Card slot PC Card eject button Power connector Vent USB ports (2) Audio-out (headphone) jack Audio-in (microphone) jack 1394 port (select models only) Supports optional Type I or Type II 32bit (CardBus) or 16bit PC Cards. Ejects a PC Card from the PC Card slot. Connects an AC adapter. Enables airflow to cool internal components. CAUTION: To prevent overheating, do not obstruct vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or thick rugs or clothing, to block airflow. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. Connect optional USB devices. Produces sound when connected to optional powered stereo speakers, headphones, ear buds, a headset, or television audio. Connects an optional computer headset microphone, stereo array microphone, or monaural microphone. Connects an optional IEEE 1394 or 1394a device, such as a camcorder. ENWW Left-side components 13 Bottom components Component Description

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9) Bluetooth compartment (select models only) Contains a Bluetooth device. Vents Enable airflow to cool internal components. CAUTION: To prevent overheating, do not obstruct vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or thick rugs or clothing, to block airflow. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. Accessory battery connector SIM slot (select models only) Connects an optional accessory battery. Contains a subscriber identity module (SIM). The SIM slot is located inside the battery bay. Battery bay Holds the battery. Battery release latches (2) Release the battery from the battery bay. Docking connector (select models only) Connects an optional docking device. Memory module compartment Contains the memory module slot. WLAN module compartment (select models only) Contains a WLAN (wireless local area network) module slot.

(10) Hard drive bay Holds the hard drive. 14 Chapter 2 Components ENWW Wireless antennae (select models only) Component Description

(1)

(2) WLAN antennae (2) (select models only)*

WWAN antenna (select models only)*

Send and receive wireless signals to communicate with wireless local area networks (WLAN). Sends and receives wireless signals to communicate with wireless wide-area networks (WWAN).

*The antennae are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the antennae free from obstructions. ENWW Wireless antennae (select models only) 15 Additional hardware components Component Description

(1)

(2)

(3)

(4)

(5) Power cord*

AC adapter Battery*

Modem cable (select models only)*

Country-specific modem cable adapter (select models only)*

Connects an AC adapter to an AC outlet. Converts AC power to DC power. Powers the computer when the computer is not plugged into external power. Connects the internal modem to an RJ-11 telephone jack or to a country-specific modem adapter. Adapts the modem cable to a non-RJ-11 telephone jack.

*Modem cables, batteries, and power cords vary in appearance by region and country. 16 Chapter 2 Components ENWW 3 Labels The labels affixed to the computer provide information you may need when you troubleshoot system problems or travel internationally with the computer. Service tagProvides the product brand and series name, serial number (s/n), and product number (p/n) of your computer. Have this information available when you contact technical support. The service tag label is affixed to the bottom of the computer. Microsoft Certificate of Authenticity (select models only)Contains the Windows Product Key. You may need the Product Key to update or troubleshoot the operating system. This certificate is affixed to the bottom of the computer. Regulatory labelProvides regulatory information about the computer. The regulatory label is affixed to the bottom of the computer. Modem approval labelProvides regulatory information about the modem and lists the agency approval markings required by some of the countries in which the modem has been approved for use. You may need this information when traveling internationally. The modem approval label is affixed inside the memory module compartment. Wireless certification label(s) (select models only)Provide information about optional wireless devices and the approval markings of some of the countries in which the devices have been approved for use. An optional device may be a wireless local area network (WLAN) device, an HP Broadband Wireless Module, or an optional Bluetooth device. If your computer model includes one or more wireless devices, one or more certification labels are included with your computer. You may need this information when traveling internationally. Wireless certification labels are affixed inside the memory module compartment. SIM (subscriber identity module) label (select models only)Provides the ICCID (Integrated Circuit Card Identifier) of your SIM. This label is located inside the battery bay. HP Broadband Wireless Module serial number label (select models only)Provides the serial number of your HP Broadband Wireless Module. This label is located inside the battery bay. ENWW 17 Index Symbols/Numerics 1394 port, identifying 13 A AC adapter, identifying 16 accessory battery connector, identifying 14 applications key, Windows 9 audio-in (microphone) jack, identifying 13 audio-out (headphone) jack, identifying 13 B battery bay 14, 17 battery light, identifying 5, 6, 10 battery release latch, identifying 14 battery, identifying 16 bays battery 14, 17 hard drive 14 Bluetooth compartment, identifying 14 Bluetooth label 17 buttons info 7 PC Card eject 13 power 7, 8 Presentation 7 TouchPad 3 volume mute 7 wireless 7, 8 C caps lock light, identifying 4, 6 Certificate of Authenticity label 17 compartment memory module 14 WLAN module 14 18 Index components additional hardware 16 bottom 14 front 10 left-side 13 rear 11 right-side 12 top 3 wireless antennae 15 connector, power 13 cord, power 16 country-specific modem cable adapter 16 D display release latch, identifying 10 display switch, identifying 7 docking connector, identifying 14 drive light, identifying 5, 6, 10 E esc key, identifying 9 external monitor port, identifying 11 F fingerprint reader, identifying 8 fn key, identifying 9 function keys, identifying 9 H hard drive bay, identifying 14 headphone (audio-out) jack 13 HP Broadband Wireless Module label 17 I IEEE 1394 port, identifying 13 info button, identifying 7 internal display switch, identifying 7 internal microphone, identifying 8 J jacks audio-in (microphone) 13 audio-out (headphone) 13 RJ-11 (modem) 12 RJ-45 (network 11 S-Video-out 11 K keypad keys, identifying 9 keys esc 9 fn 9 function 9 keypad 9 Windows applications 9 Windows logo 9 L labels Bluetooth 17 HP Broadband Wireless Module 17 Microsoft Certificate of Authenticity 17 modem approval 17 regulatory 17 service tag 17 SIM 17 wireless certification 17 WLAN 17 latch, battery release 14 lights battery 5, 6, 10 caps lock 4, 6 drive 5, 6, 10 ENWW mute 4 num lock 4, 6 power 4, 6, 10 volume down 4 volume mute 4 volume up 4 wireless 4, 10 M Media Card Reader, identifying 12 memory module compartment, identifying 14 microphone (audio-in) jack 13 Microsoft Certificate of Authenticity label 17 modem approval label 17 modem cable 16 monitor port, external 11 mute button, identifying 7 mute light, identifying 4 N num lock light, identifying 4, 6 O operating system Microsoft Certificate of Authenticity label 17 Product Key 17 optical drive, identifying 12 P PC Card eject button, identifying 13 PC Card slot, identifying 13 ports 1394 13 external monitor 11 USB 12, 13 power button, identifying 7, 8 power connector, identifying 13 power cord, identifying 16 power light, identifying 10 power lights, identifying 4, 6 Presentation button, identifying 7 Product Key 17 product name and number, computer 17 wireless light, identifying 4, 10 WLAN antennae, identifying 15 WLAN device 17 WLAN label 17 WLAN module compartment, identifying 14 WWAN antenna, identifying 15 R regulatory information modem approval label 17 regulatory label 17 wireless certification labels 17 release latch, battery 14 RJ-11 (modem) jack, identifying 12 RJ-45 (network) jack, identifying 11 S S-Video-out jack, identifying 11 scrolling regions, TouchPad 3 security cable slot, identifying 11 serial number, computer 17 service tag 17 SIM label 17 SIM slot, identifying 14 slots Media Card Reader 12 memory module 14 speaker, identifying 10 T TouchPad buttons 3 identifying 3 scrolling regions 3 traveling with the computer modem approval label 17 wireless certification labels 17 U USB ports, identifying 12, 13 V vent 13 vents, identifying 14 volume down light, identifying 4 volume mute button, identifying 7 volume mute light, identifying 4 volume scroll zone, identifying 8 volume up light, identifying 4 W Windows applications key, identifying 9 Windows logo key, identifying 9 wireless button, identifying 7, 8 wireless certification label 17 ENWW Index 19

Notebook Tour User Guide Copyright 2007 Hewlett-Packard Development Company, L.P. Windows is a U.S. registered trademark of Microsoft Corporation. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. SD Logo is a trademark of its proprietor. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: March 2007 Document Part Number: 435813-001 Product notice This user guide describes features that are common to most models. Some features may not be available on your computer. ENWW iii iv Product notice ENWW Table of contents 1 Identifying Hardware 2 Components Top components ................................................................................................................................... 3 TouchPad ............................................................................................................................ 3 Lights ................................................................................................................................... 4 Buttons, switches, and fingerprint reader ............................................................................ 7 Keys ..................................................................................................................................... 9 Front components .............................................................................................................................. 10 Rear components ............................................................................................................................... 11 Right-side components ....................................................................................................................... 12 Left-side components ......................................................................................................................... 13 Bottom components ........................................................................................................................... 14 Wireless antennae (select models only) ............................................................................................. 15 Additional hardware components ....................................................................................................... 16 3 Labels Index ................................................................................................................................................................... 18 ENWW v vi ENWW 1 Identifying Hardware To see a list of hardware installed in the computer, follow these steps:

1. 2. Select Start > Computer > System properties. In the left pane, click Device Manager. You can also add hardware or modify device configurations using Device Manager. ENWW 1 2 Components 2 Chapter 2 Components ENWW Top components TouchPad Component

(1)

(2)

(3)

(4) TouchPad*

Left TouchPad button*

Right TouchPad button*

TouchPad scroll zone*

Description Moves the pointer and selects or activates items on the screen. Functions like the left button on an external mouse. Functions like the right button on an external mouse. Scrolls up or down.

*This table describes factory settings. To view or change pointing device preferences, select Start > Control Panel > Hardware and Sound > Mouse. ENWW Top components 3 Lights NOTE: Refer to the illustration that most closely matches your computer. Component

(1) Power lights (2)*

(2) Wireless lights (2)

(3)

(4)

(5)

(6)

(7) Caps lock light Num lock light Volume mute light Volume down light Volume up light Description On: The computer is on. Blinking: The computer is in the Sleep state. Blinking rapidly: An AC adapter with a higher power rating should be connected. Off: The computer is off or in Hibernation. On: An integrated wireless device, such as a wireless local area network (WLAN) device, the HP Broadband Wireless Module, and/or a Bluetooth device, is on. Off: All wireless devices are off. On: Caps lock is on. On: Num lock is on or the embedded numeric keypad is enabled. Off: Computer sound is on. On: Computer sound is off. Blinking: The volume scroll zone is being used to decrease speaker volume. Blinking: The volume scroll zone is being used to increase speaker volume. 4 Chapter 2 Components ENWW Component

(8) Battery light

(9) Drive light Description Amber: A battery is charging. Green: A battery is close to full charge capacity. Blinking amber: A battery that is the only available power source has reached a low battery level. When the battery reaches a critical battery level, the battery light begins blinking rapidly. Off: If the computer is plugged into an external power source, the light turns off when all batteries in the computer are fully charged. If the computer is not plugged into an external power source, the light stays off until the battery reaches a low battery level. Blinking green: The hard drive or optical drive is being accessed. Amber: HP 3D DriveGuard has temporarily parked the internal hard drive.

*The 2 power lights display the same information. The light on the power button is visible only when the computer is open. The power light on the front of the computer is visible whether the computer is open or closed. The 2 wireless lights display the same information. The light on the wireless button is visible only when the computer is open. The wireless light on the front of the computer is visible whether the computer is open or closed. ENWW Top components 5 Component

(1) Power lights (2)*

(2) Wireless lights (2)

(3)

(4)

(5) Caps lock light Num lock light Battery light Description On: The computer is on. Blinking: The computer is in the Sleep state. Blinking rapidly: An AC adapter with a higher power rating should be connected. Off: The computer is off or in Hibernation. On: An integrated wireless device, such as a wireless local area network (WLAN) device, the HP Broadband Wireless Module, and/or Bluetooth device, is on. Off: All wireless devices are off. On: Caps lock is on. Blinking: Num lock is on or the embedded numeric keypad is enabled. On: A battery is charging. Green: A battery is close to full charge capacity. Blinking amber: A battery that is the only available power source has reached a low battery level. When the battery reaches a critical battery level, the battery light begins blinking rapidly. Off: If the computer is plugged into an external power source, the light turns off when all batteries in the computer are fully charged. If the computer is not plugged into an external power source, the light stays off until the battery reaches a low battery level.

(6) Drive light Blinking green: The hard drive or optical drive is being accessed.

*The 2 power lights display the same information. The light on the power button is visible only when the computer is open. The power light on the front of the computer is visible whether the computer is open or closed. The 2 wireless lights display the same information. The light on the wireless button is visible only when the computer is open. The wireless light on the front of the computer is visible whether the computer is open or closed. 6 Chapter 2 Components ENWW Buttons, switches, and fingerprint reader NOTE: Refer to the illustration that most closely matches your computer. Component

(1) Power button Internal display switch Info button Wireless button

(2)

(3)

(4)

(5)

(6) Description When the computer is off, press the button to turn on the computer. When the computer is on, press the button to shut down the computer. When the computer is in the Sleep state, press the button briefly to exit Sleep. When the computer is in Hibernation, press the button briefly to exit Hibernation. If the computer has stopped responding and Windows shutdown procedures are ineffective, press and hold the power button for at least 5 seconds to turn off the computer. To learn more about your power settings, select Start > Control Panel > System and Maintenance > Power Options. Turns off the display if the display is closed while the power is on. Launches Info Center, which enables you to open various software solutions. Turns the wireless feature on or off, but does not establish a wireless connection. NOTE: A wireless network must be set up in order to establish a wireless connection. Presentation button Volume mute button Starts the presentation feature. Mutes and restores speaker sound. ENWW Top components 7 Component

(7) Volume scroll zone

(8)

(9) Internal microphone Fingerprint reader Description Adjusts speaker volume. Slide your finger to the left to decrease volume and to the right to increase volume. You can also tap the minus sign on the scroll zone to decrease volume, or tap the plus sign on the scroll zone to increase volume. Records sound. Allows a fingerprint logon to Windows, instead of a password logon. Component

(1) Power button

(2)

(3) Internal display switch Wireless button Description When the computer is off, press the button to turn on the computer. When the computer is on, press the button to shut down the computer. When the computer is in the Sleep state, press the button briefly to exit Sleep. When the computer is in Hibernation, press the button briefly to exit Hibernation. If the computer has stopped responding and Windows shutdown procedures are ineffective, press and hold the power button for at least 5 seconds to turn off the computer. To learn more about your power settings, select Start > Control Panel > System and Maintenance > Power Options. Turns off the display if the display is closed while the power is on. Turns the wireless feature on or off, but does not create a wireless connection. NOTE: A wireless network must be set up in order to establish a wireless connection. 8 Chapter 2 Components ENWW Keys NOTE: Your computer may look slightly different from the illustration in this section. Component Description

(1)

(2)

(3)

(4)

(5)

(6) esc key fn key Displays system information when pressed in combination with the fn key. Executes frequently used system functions when pressed in combination with a function key or the esc key. Windows logo key Displays the Windows Start menu. Windows applications key Displays a shortcut menu for items beneath the pointer. Embedded numeric keypad keys Can be used like the keys on an external numeric keypad. Function keys Execute frequently used system functions when pressed in combination with the fn key. ENWW Top components 9 Front components Component

(1) Wireless light

(2) Power light

(3) Battery light

(4) Drive light Description On: An integrated wireless device, such as a wireless local area network (WLAN) device, the HP Broadband Wireless Module, and/or a Bluetooth device, is on. Off: All wireless devices are off. On: The computer is on. Blinking: The computer is in the Sleep state. Blinking rapidly: An AC adapter with a higher power rating should be connected. Off: The computer is off or in Hibernation. Amber: A battery is charging. Green: A battery is close to full charge capacity. Blinking amber: A battery that is the only available power source has reached a low battery level. When the battery reaches a critical battery level, the battery light begins blinking rapidly. Off: If the computer is plugged into an external power source, the light turns off when all batteries in the computer are fully charged. If the computer is not plugged into an external power source, the light stays off until the battery reaches a low battery level. Blinking green: The hard drive or optical drive is being accessed. Amber (select models only): HP 3D DriveGuard has temporarily parked the hard drive.

(5)

(6) Speakers Display release latch Produce sound. Opens the computer. 10 Chapter 2 Components ENWW Rear components Component Description

(1) Security cable slot Attaches an optional security cable to the computer. NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen.

(2)

(3)

(4) RJ-45 (network) jack External monitor port Connects a network cable. Connects an external VGA monitor or projector. S-Video-out jack (select models only) Connects an optional S-Video device such as a television, VCR, camcorder, overhead projector, or video capture card. ENWW Rear components 11 Right-side components Component Description

(1) Media Card Reader (select models only) Supports the following optional digital card formats: Secure Digital

(SD) Memory Card, MultiMediaCard (MMC), Memory Stick (MS), Memory Stick Pro (MSPro), Memory Stick Duo Adapter, xD-Picture Card (XD).

(2)

(3)

(4) USB ports (2) (select models only) Connect an optional USB device. Optical drive RJ-11 (modem) jack Reads an optical disc. Connects a modem cable. 12 Chapter 2 Components ENWW Left-side components Component Description

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8) PC Card slot PC Card eject button Power connector Vent USB ports (2) Audio-out (headphone) jack Audio-in (microphone) jack 1394 port (select models only) Supports optional Type I or Type II 32bit (CardBus) or 16bit PC Cards. Ejects a PC Card from the PC Card slot. Connects an AC adapter. Enables airflow to cool internal components. CAUTION: To prevent overheating, do not obstruct vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or thick rugs or clothing, to block airflow. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. Connect optional USB devices. Produces sound when connected to optional powered stereo speakers, headphones, ear buds, a headset, or television audio. Connects an optional computer headset microphone, stereo array microphone, or monaural microphone. Connects an optional IEEE 1394 or 1394a device, such as a camcorder. ENWW Left-side components 13 Bottom components Component Description

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9) Bluetooth compartment (select models only) Contains a Bluetooth device. Vents Enable airflow to cool internal components. CAUTION: To prevent overheating, do not obstruct vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or thick rugs or clothing, to block airflow. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. Accessory battery connector SIM slot (select models only) Connects an optional accessory battery. Contains a subscriber identity module (SIM). The SIM slot is located inside the battery bay. Battery bay Holds the battery. Battery release latches (2) Release the battery from the battery bay. Docking connector (select models only) Connects an optional docking device. Memory module compartment Contains the memory module slot. WLAN module compartment (select models only) Contains a WLAN (wireless local area network) module slot.

(10) Hard drive bay Holds the hard drive. 14 Chapter 2 Components ENWW Wireless antennae (select models only) Component Description

(1)

(2) WLAN antennae (2) (select models only)*

WWAN antenna (select models only)*

Send and receive wireless signals to communicate with wireless local area networks (WLAN). Sends and receives wireless signals to communicate with wireless wide-area networks (WWAN).

*The antennae are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the antennae free from obstructions. ENWW Wireless antennae (select models only) 15 Additional hardware components Component Description

(1)

(2)

(3)

(4)

(5) Power cord*

AC adapter Battery*

Modem cable (select models only)*

Country-specific modem cable adapter (select models only)*

Connects an AC adapter to an AC outlet. Converts AC power to DC power. Powers the computer when the computer is not plugged into external power. Connects the internal modem to an RJ-11 telephone jack or to a country-specific modem adapter. Adapts the modem cable to a non-RJ-11 telephone jack.

*Modem cables, batteries, and power cords vary in appearance by region and country. 16 Chapter 2 Components ENWW 3 Labels The labels affixed to the computer provide information you may need when you troubleshoot system problems or travel internationally with the computer. Service tagProvides the product brand and series name, serial number (s/n), and product number (p/n) of your computer. Have this information available when you contact technical support. The service tag label is affixed to the bottom of the computer. Microsoft Certificate of Authenticity (select models only)Contains the Windows Product Key. You may need the Product Key to update or troubleshoot the operating system. This certificate is affixed to the bottom of the computer. Regulatory labelProvides regulatory information about the computer. The regulatory label is affixed to the bottom of the computer. Modem approval labelProvides regulatory information about the modem and lists the agency approval markings required by some of the countries in which the modem has been approved for use. You may need this information when traveling internationally. The modem approval label is affixed inside the memory module compartment. Wireless certification label(s) (select models only)Provide information about optional wireless devices and the approval markings of some of the countries in which the devices have been approved for use. An optional device may be a wireless local area network (WLAN) device, an HP Broadband Wireless Module, or an optional Bluetooth device. If your computer model includes one or more wireless devices, one or more certification labels are included with your computer. You may need this information when traveling internationally. Wireless certification labels are affixed inside the memory module compartment. SIM (subscriber identity module) label (select models only)Provides the ICCID (Integrated Circuit Card Identifier) of your SIM. This label is located inside the battery bay. HP Broadband Wireless Module serial number label (select models only)Provides the serial number of your HP Broadband Wireless Module. This label is located inside the battery bay. ENWW 17 Index Symbols/Numerics 1394 port, identifying 13 A AC adapter, identifying 16 accessory battery connector, identifying 14 applications key, Windows 9 audio-in (microphone) jack, identifying 13 audio-out (headphone) jack, identifying 13 B battery bay 14, 17 battery light, identifying 5, 6, 10 battery release latch, identifying 14 battery, identifying 16 bays battery 14, 17 hard drive 14 Bluetooth compartment, identifying 14 Bluetooth label 17 buttons info 7 PC Card eject 13 power 7, 8 Presentation 7 TouchPad 3 volume mute 7 wireless 7, 8 C caps lock light, identifying 4, 6 Certificate of Authenticity label 17 compartment memory module 14 WLAN module 14 18 Index components additional hardware 16 bottom 14 front 10 left-side 13 rear 11 right-side 12 top 3 wireless antennae 15 connector, power 13 cord, power 16 D display release latch, identifying 10 display switch, identifying 7 docking connector, identifying 14 drive light, identifying 5, 6, 10 E esc key, identifying 9 external monitor port, identifying 11 F fingerprint reader, identifying 8 fn key, identifying 9 function keys, identifying 9 H hard drive bay, identifying 14 headphone (audio-out) jack 13 HP Broadband Wireless Module label 17 I IEEE 1394 port, identifying 13 info button, identifying 7 internal display switch, identifying 7 internal microphone, identifying 8 J jacks audio-in (microphone) 13 audio-out (headphone) 13 RJ-11 (modem) 12 RJ-45 (network 11 S-Video-out 11 K keypad keys, identifying 9 keys esc 9 fn 9 function 9 keypad 9 Windows applications 9 Windows logo 9 L labels Bluetooth 17 HP Broadband Wireless Module 17 Microsoft Certificate of Authenticity 17 modem approval 17 regulatory 17 service tag 17 SIM 17 wireless certification 17 WLAN 17 latch, battery release 14 lights battery 5, 6, 10 caps lock 4, 6 drive 5, 6, 10 mute 4 num lock 4, 6 ENWW power 4, 6, 10 volume down 4 volume mute 4 volume up 4 wireless 4, 10 M Media Card Reader, identifying 12 memory module compartment, identifying 14 microphone (audio-in) jack 13 Microsoft Certificate of Authenticity label 17 modem approval label 17 monitor port, external 11 mute button, identifying 7 mute light, identifying 4 N num lock light, identifying 4, 6 O operating system Microsoft Certificate of Authenticity label 17 Product Key 17 optical drive, identifying 12 P PC Card eject button, identifying 13 PC Card slot, identifying 13 ports 1394 13 external monitor 11 USB 12, 13 power button, identifying 7, 8 power connector, identifying 13 power cord, identifying 16 power light, identifying 10 power lights, identifying 4, 6 Presentation button, identifying 7 Product Key 17 product name and number, computer 17 R regulatory information modem approval label 17 regulatory label 17 wireless certification labels 17 release latch, battery 14 RJ-11 (modem) jack, identifying 12 RJ-45 (network) jack, identifying 11 WLAN device 17 WLAN label 17 WLAN module compartment, identifying 14 WWAN antenna, identifying 15 S S-Video-out jack, identifying 11 scrolling regions, TouchPad 3 security cable slot, identifying 11 serial number, computer 17 service tag 17 SIM label 17 SIM slot, identifying 14 slot memory module 14 slots Media Card Reader 12 speaker, identifying 10 T TouchPad buttons 3 identifying 3 scrolling regions 3 traveling with the computer modem approval label 17 wireless certification labels 17 U USB ports, identifying 12, 13 V vent 13 vents, identifying 14 volume down light, identifying 4 volume mute button, identifying 7 volume mute light, identifying 4 volume scroll zone, identifying 8 volume up light, identifying 4 W Windows applications key, identifying 9 Windows logo key, identifying 9 wireless button, identifying 7, 8 wireless certification label 17 wireless light, identifying 4, 10 WLAN antennae, identifying 15 ENWW Index 19

435816-001.book Page i Thursday, December 7, 2006 11:50 AM Getting Started HP Business Notebook PC Document Part Number: 435816-001 March 2007 This guide explains how to set up your hardware and software, and begin using the computer in Windows. 435816-001.book Page ii Thursday, December 7, 2006 11:50 AM Copyright 2007 Hewlett-Packard Development Company, L.P. Windows is a U.S. registered trademark of Microsoft Corporation. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Getting Started HP Business Notebook PC First Edition: March 2007 Document Part Number: 435816-001 Product notice This user guide describes features that are common to most models. Some features may not be available on your computer. 435816-001.book Page iii Thursday, December 7, 2006 11:50 AM Contents 1 First-time setup Identifying required hardware . 11 Setting up the computer . 13 Step 1: Insert the battery . 14 Step 2: Connect the computer to external power. 15 Step 3: Turn on the computer . 16 Step 4: Set up the software . 18 Step 5: Create recovery discs (recommended) . 18 2 Quick tour Identifying required hardware . 21 Top components . 22 Front components . 23 Left-side components . 24 Right-side components . 25 Rear components . 26 Bottom components. 27 Wireless antennae (select models only). 28 Getting Started iii 435816-001.book Page iv Thursday, December 7, 2006 11:50 AM Contents 3 Next steps Protecting the computer . 31 Protecting the computer from viruses . 31 Protecting your system files . 32 Protecting your privacy . 32 Protecting the computer from power surges . 32 Using the computer safely . 33 Connecting to a computer network . 35 Installing additional hardware and software . 36 Identifying and installing hardware. 36 Locating and installing software . 36 Updating the software installed on the computer. 37 Finding the user guides . 38 Turning off the computer correctly . 38 4 Troubleshooting Troubleshooting resources . 41 Quick troubleshooting . 42 The computer is unable to start up. 42 The computer screen is blank . 43 Software is functioning abnormally . 44 The computer is turned on but not responding . 44 The computer is unusually warm. 45 An external device is not working. 46 The WLAN connection is not working . 46 Help and Support . 47 Contacting technical support . 48 A Connect to the Internet from your home Choosing an ISP. A1 Using the New Connection Wizard . A2 Choosing the type of Internet connection . A2 iv Getting Started 435816-001.book Page v Thursday, December 7, 2006 11:50 AM Contents B Backup and recovery Creating recovery discs . B1 Backing up your information . B2 When to back up . B2 Back up suggestions . B3 Backing up specific files or folders . B4 Backing up the entire hard drive . B4 Creating recovery points . B5 Scheduling backups . B6 Performing a recovery . B7 Performing a recovery from the recovery discs. B7 Performing a recovery from the hard drive . B8 C Specifications Operating environment. C1 Rated input power . C2 Index Getting Started v 435816-001.book Page vi Thursday, December 7, 2006 11:50 AM 435816-001.book Page 1 Thursday, December 7, 2006 11:50 AM 1 First-time setup Identifying required hardware To set up the computer for the first time, you will need the computer, the AC adapter, the power cord, and the primary battery. Components included with the computer may vary by region and by model. Getting Started 11 435816-001.book Page 2 Thursday, December 7, 2006 11:50 AM First-time setup Component 1 Power cord Component 4 Country-specific modem adapter

(select models only) 2 AC adapter 5 Modem cable (select models only)

(optional for setup) 3 Primary battery Use only the AC adapter provided with the computer or one approved for this computer. Unless you use dial-up networking, the modem cable is optional for setup. 12 Getting Started 435816-001.book Page 3 Thursday, December 7, 2006 11:50 AM First-time setup Setting up the computer Computer setup involves the following tasks:

1. Inserting the battery into the computer 2. Connecting the computer to external power The battery begins to charge. 3. Turning on the computer 4. Setting up the software 5. Creating recovery discs (recommended) Refer to Appendix B, Backup and recovery, for instructions. CAUTION: Reduce the risk of file corruption by observing the following practices during the hardware and software setup procedures:

Do not unplug the computer from external power. Do not shut down the computer or initiate Sleep or Hibernation. Getting Started 13 435816-001.book Page 4 Thursday, December 7, 2006 11:50 AM First-time setup Step 1: Insert the battery To insert a primary battery:

1. Turn the computer upside down on a flat surface, with the battery bay toward you. 2. Slide the battery 1 into the battery bay until it is seated. The battery release latches 2 automatically lock the battery into place. 14 Getting Started 435816-001.book Page 5 Thursday, December 7, 2006 11:50 AM First-time setup Step 2: Connect the computer to external power Power cords and AC outlets vary in appearance by region and country. To connect the computer to external AC power:

1. Plug the AC adapter into the power connector 1 on the computer. 2. Plug the power cord into the AC adapter 2. 3. Plug the other end of the power cord into an AC outlet 3. Getting Started 15 435816-001.book Page 6 Thursday, December 7, 2006 11:50 AM First-time setup When the computer receives AC power, the battery begins to charge and the battery light (on the front of the computer) turns on. When the battery is fully charged, the battery light turns off. Leave the computer connected to external power until the battery is fully charged and the battery light turns off. A partially charged new battery can run the computer after software setup is complete, but battery charge displays will not be accurate until the new battery has been fully charged. Step 3: Turn on the computer To open the computer:

1. Slide the display release latch 1 to the right to release the display. 2. Raise the display 2. 16 Getting Started 435816-001.book Page 7 Thursday, December 7, 2006 11:50 AM First-time setup To turn on the computer:

Press the power button 1. The power light on the power button 2 turns on. Getting Started 17 435816-001.book Page 8 Thursday, December 7, 2006 11:50 AM First-time setup Step 4: Set up the software After the computer is turned on, it will go through software setup. Follow the on-screen instructions to set up the software. Note the following points:

After you respond to the setup prompt, you must complete the entire setup process without interruption. Setup time varies. During software setup, the computer may pause periodically for several minutes. These normal pauses are indicated by an hourglass icon. CAUTION: If you are prompted to select an operating system language, choose carefully. On some models, the languages that you do not choose are deleted from the system and cannot be restored during software setup. To register the operating system and the computer during software setup, the computer must be connected by an RJ-45 (network) cable to an existing network that has access to the Internet. If you do not register during software setup, you can do so at any time after software setup is complete. For more information about connecting to the Internet, refer to Appendix A, Connect to the Internet from your home, in this guide. Step 5: Create recovery discs

(recommended) You can create a set of recovery discs of your full factory image using HP Backup & Recovery Manager. You can use the recovery discs to start up (boot) the computer and restore the operating system and software programs to factory settings in case of system failure or instability. Refer to Appendix B, Backup and recovery, for detailed instructions. 18 Getting Started 435816-001.book Page 1 Thursday, December 7, 2006 11:50 AM 2 Quick tour Identifying required hardware Components included with the computer may vary by region and model. The illustrations in this chapter identify the standard features included on most computer models. Getting Started 21 435816-001.book Page 2 Thursday, December 7, 2006 11:50 AM Quick tour Top components Component 1 Power button Component 9 Internal microphone

(select models only) 2 Power lights (2)

- TouchPad scroll zone 3 Info button

(select models only) q Fingerprint reader

(select models only) 4 Wireless button w Right TouchPad button 5 Wireless lights (2) e Left TouchPad button 6 Presentation button

(select models only) r Drive light 7 Volume mute button t Battery light 8 Volume scroll zone

(select models only) y TouchPad 22 Getting Started 435816-001.book Page 3 Thursday, December 7, 2006 11:50 AM Front components Quick tour Component 1 Wireless light 2 Power light 3 Battery light Component 4 Drive light 5 Speakers (2) 6 Display release latch Getting Started 23 435816-001.book Page 4 Thursday, December 7, 2006 11:50 AM Quick tour Left-side components Component Component 1 Power connector 5 Audio-in (microphone) jack 2 Vent 6 1394 port (select models only) 3 USB ports (2) 7 PC Card slot 4 Audio-out (headphone) jack 24 Getting Started 435816-001.book Page 5 Thursday, December 7, 2006 11:50 AM Right-side components Quick tour Component 1 Media Card Reader

(select models only) 2 USB ports (2)

(select models only) Component 3 Optical drive 4 RJ-11 (modem) jack Getting Started 25 435816-001.book Page 6 Thursday, December 7, 2006 11:50 AM Quick tour Rear components Component Component 1 Security cable slot 3 External monitor port 2 RJ-45 (network) jack 4 S-Video-out jack

(select models only) 26 Getting Started 435816-001.book Page 7 Thursday, December 7, 2006 11:50 AM Bottom components Quick tour Component 1 Bluetooth compartment

(select models only) 2 Vents (3) Component 6 Battery release latches (2) 7 Docking connector

(select models only) 3 Accessory battery connector 8 Memory module compartment 4 SIM slot (select models only) 9 WLAN module compartment

(select models only) 5 Battery bay

- Hard drive bay Getting Started 27 435816-001.book Page 8 Thursday, December 7, 2006 11:50 AM Quick tour Wireless antennae (select models only) Component Component 1 WLAN antennae (2)

(select models only)*

2 WWAN antenna

(select models only)*

*The antennae are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the antennae free from obstructions. 28 Getting Started 435816-001.book Page 1 Thursday, December 7, 2006 11:50 AM 3 Next steps Protecting the computer The information in this section explains how your computer can be protected from damage caused by a virus, a security breach, a power surge, unsafe operation, or system failure. Protecting the computer from viruses When you use the computer for e-mail, network, or Internet access, you expose it to computer viruses that can disable the operating system, applications, or utilities or cause them to function abnormally. Antivirus software can detect most viruses, destroy them, and in most cases, repair any damage they have caused. To provide ongoing protection against newly discovered viruses, antivirus software must be kept up to date. Norton Internet Security is preinstalled on the computer:

Your version of Norton Internet Security includes 60 days of free updates. It is strongly recommended that you protect the computer against new viruses beyond 60 days by purchasing extended update service. For information about using and updating Norton Internet Security and for purchasing extended update service, select Start > All Programs > Norton Internet Security > Help and Support. To access Norton Internet Security, select Start > All Programs > Norton Internet Security. Getting Started 31 435816-001.book Page 2 Thursday, December 7, 2006 11:50 AM Next steps Protecting your system files The HP Backup & Recovery Manager provides several ways to back up the system and to recover optimal system functionality. Refer to Appendix B, Backup and recovery, for additional information. Protecting your privacy When you use the computer for e-mail, network, or Internet access, it is possible for unauthorized persons to obtain information about you or the computer. To optimize the computers privacy protection features, observe these practices:

Keep the operating system and software updated. Many software updates contain security enhancements. Use a firewall. Firewall software monitors incoming traffic on the computer to block messages that do not meet specific security criteria. Some firewalls also monitor outgoing traffic. Protecting the computer from power surges To protect the computer from the power surges that may be caused by an uncertain power supply or an electrical storm, observe these practices:

Plug the computer power cord into an optional, high-quality surge protector. Surge protectors are available from most computer or electronics retailers. During an electrical storm, either run the computer on battery power or shut down the computer and unplug the power cord. If applicable to your location, provide surge protection on the modem cable that connects the modem to a telephone line. Telephone line surge protectors are available from most computer or electronic retailers in some regions. 32 Getting Started 435816-001.book Page 3 Thursday, December 7, 2006 11:50 AM Using the computer safely Next steps WARNING: To reduce the risk of electric shock or damage to your equipment, observe these practices:

Plug the power cord into an AC outlet that is easily accessible at all times. Disconnect power from the computer by unplugging the power cord from the AC outlet (not by unplugging the power cord from the computer). If provided with a 3-pin attachment plug on your power cord, plug the cord into a grounded (earthed) 3-pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an important safety feature. WARNING: To reduce the risk of serious injury, read the Safety and Comfort Guide. It describes proper workstation setup and proper posture, health, and work habits for computer users. The Safety and Comfort Guide also provides important electrical and mechanical safety information. This guide is available on the Web at http://www.hp.com/ergo and in Help and Support. To access the guide in Help and Support, select Start > Help and Support > User Guides. Getting Started 33 435816-001.book Page 4 Thursday, December 7, 2006 11:50 AM Next steps WARNING: To avoid potential discomfort or burns, do not block the air vents or place the computer on your lap for extended periods. Also, do not allow the AC adapter to contact the skin for extended periods during operation. The computer is designed to run demanding applications at full power. As a result of increased power consumption, it is normal for the computer and the AC adapter to feel warm or hot when used continuously. The computer and the AC adapter comply with the user-accessible surface temperature limits defined by the International Standard for Safety of Information Technology Equipment

(IEC 60950). WARNING: To reduce potential safety issues, use only the AC adapter or battery provided with the computer, a replacement AC adapter or battery provided by HP, or a compatible AC adapter or battery purchased as an accessory from HP. For more safety and regulatory information, and for battery disposal information, refer to the Regulatory, Safety and Environmental Notices located in Help and Support. To access the notices in Help and Support, select Start > Help and Support >

User Guides. 34 Getting Started 435816-001.book Page 5 Thursday, December 7, 2006 11:50 AM Next steps Connecting to a computer network The computer may have the following networking capabilities:

Local area network (LAN) Wireless local area network (WLAN) Wireless wide area network (WWAN) Bluetooth If you plan to connect the computer to a home office LAN or WLAN, refer to Help and Support for information on networking. If you need assistance to connect to a company LAN or WLAN, contact your network administrator. The computer display must be open before you can connect to a wireless network. For information on activating broadband wireless service, refer to the mobile network operator information included with your computer. If the computer has a Bluetooth device, you can create a personal area network (PAN) to connect to other Bluetooth-enabled devices, such as computers, telephones, printers, headsets, speakers, and cameras. For information on using a Bluetooth device, refer to Bluetooth online Help. For information on connecting the computer to the Internet, refer to Appendix A, Connect to the Internet from your home. Getting Started 35 435816-001.book Page 6 Thursday, December 7, 2006 11:50 AM Next steps Installing additional hardware and software Identifying and installing hardware To see a list of hardware installed on the computer, follow these steps:

1. Select Start > Computer > System properties. 2. In the left pane, click Device Manager. Windows includes the User Account Control feature to improve the security of your computer. You may be prompted for your permission or password for tasks such as installing applications, running utilities, or changing Windows settings. Refer to Windows online Help for more information. You can also add hardware or modify your device configurations using Device Manager. To install additional hardware, such as an optional printer, follow the instructions provided by the hardware manufacturer to install the device and any required drivers. Locating and installing software The computer includes software that is provided in the following forms:

Preinstalled on your hard drive. To see a list of the ready-to-use software preinstalled on the computer, follow these steps:

1. Click Start > All Programs. 2. Click the program you want to open. 36 Getting Started 435816-001.book Page 7 Thursday, December 7, 2006 11:50 AM Next steps Provided on a CD or DVD. To install a software program from a disc, follow these steps:

1. Insert the disc into your optical drive. 2. When the installation wizard opens, follow the on-screen instructions. 3. Restart the computer if prompted to do so. Preloaded software. This is software provided on the hard drive but not ready to use. To locate or install preloaded software or drivers, follow these steps:

1. Select Start > All Programs > Software Setup. 2. Follow the on-screen instructions and select the check box next to the software program or driver you want to install. For details about using software included with the computer, refer to the software manufacturers instructions, which may be provided on disc, as online Help files, or on the manufacturers Web site. Updating the software installed on the computer Most software, including the operating system, is updated frequently by the manufacturer or provider. Important updates to the software included with the computer may have been released since the computer left the factory. Getting Started 37 435816-001.book Page 8 Thursday, December 7, 2006 11:50 AM Next steps Some updates may affect the way the computer responds to optional software or external devices. Many updates provide security enhancements. Update the operating system and other software provided on the computer as soon as the computer is connected to the Internet. To access update links for the operating system and other software provided on the computer, select Start > Help and Support. Finding the user guides User guides, regulatory and safety notices, and other information resources about using the computer are available through Help and Support. To access the user guides:

Select Start > Help and Support > User Guides. Turning off the computer correctly Whenever possible, turn off the computer by using the standard shutdown procedure:

1. Save your work and close all open applications. 2. Shut down the computer through the operating system by clicking Start, clicking the arrow next to the Lock button, and then clicking Shut Down. 38 Getting Started 435816-001.book Page 9 Thursday, December 7, 2006 11:50 AM Next steps If you are unable to turn off the computer with these procedures, try the following emergency shutdown procedures in the sequence provided:

CAUTION: Using one of the following emergency shutdown procedures will result in the loss of unsaved information. Press ctrl+alt+delete. Then, in the lower-right corner of the screen, click the Power button. Press and hold the power button for at least 5 seconds. Disconnect the computer from external power and remove the battery. Getting Started 39 435816-001.book Page 10 Thursday, December 7, 2006 11:50 AM 435816-001.book Page 1 Thursday, December 7, 2006 11:50 AM 4 Troubleshooting Troubleshooting resources If you experience computer problems, perform these troubleshooting steps in the order provided until the problem is resolved:

Refer to Quick troubleshooting, the next section in this chapter. Access additional information about the computer and Web site links through Help and Support. Select Start > Help and Support. Although many checkup and repair tools require an Internet connection, other tools can help you fix a problem when the computer is offline. Contact technical support for further assistance. Getting Started 41 435816-001.book Page 2 Thursday, December 7, 2006 11:50 AM Troubleshooting Quick troubleshooting The computer is unable to start up To turn on the computer, press the power button. When the computer is turned on, the power light turns on. If the computer and the power light are not turned on when you press the power button, adequate power may not be available to the computer. The following suggestions may help you determine why the computer will not start up:

If the computer is plugged into an AC outlet, be sure that the AC outlet is providing adequate power by plugging another electrical device into the outlet. If the power light on the front of the computer is blinking rapidly, replace the AC adapter with one having a higher power rating, and then plug the adapter into an AC outlet. Use only the AC adapter provided with the computer or one approved for this computer. If the computer is running on battery power or is plugged into an external power source other than an AC outlet, plug the computer into an AC outlet using the AC adapter. Be sure the power cord and AC adapter connections are secure. If the computer is running on battery power, try the following procedures in the sequence provided:

If the battery light on the front of the computer is blinking, the battery has reached a low battery level, which may not allow the computer to start up. Plug the computer into an AC outlet using the AC adapter, start the computer, and allow the battery to charge. Remove the primary battery and optional accessory battery (if applicable) and plug the computer into an AC outlet using the AC adapter. If you can turn the computer on, one of the batteries may need to be replaced. 42 Getting Started 435816-001.book Page 3 Thursday, December 7, 2006 11:50 AM The computer screen is blank Troubleshooting If the computer is on but the screen is blank: the computer may be in the Sleep state or in Hibernation; the computer may not be set to display the image on the computer screen; or the display switch may not be functioning properly. Try the following suggestions to resolve the issue:

To exit Sleep or Hibernation, briefly press the power button. Sleep and Hibernation are energy-saving features that can turn off the display. Sleep and Hibernation can be initiated by the system while the computer is on but not in use, or when the computer has reached a low battery level. To change these and other power settings, select Start > Control Panel >

System and Maintenance > Power Options. To transfer the image to the computer screen, press fn+f4. On most models, when an optional external display device, such as a monitor, is connected to the computer, the image can be displayed on the computer screen or the external display, or on both devices simultaneously. When you press fn+f4 repeatedly, the image alternates among the computer display, one or more external display devices, and simultaneous display on all devices. Press the display switch on the computer to be sure that it moves freely. The display switch is normally located on the upper-left corner of the keyboard. Getting Started 43 435816-001.book Page 4 Thursday, December 7, 2006 11:50 AM Troubleshooting Software is functioning abnormally Follow these suggestions if the software becomes unresponsive or responds abnormally:

Restart the computer by clicking Start, clicking the arrow next to the Lock button, and then clicking Restart. If you cannot restart the computer using this procedure, refer to the next section, The computer is turned on but not responding. Run a virus scan. For information about using the antivirus resources on the computer, refer to Protecting the computer from viruses in Chapter 3, Next steps. The computer is turned on but not responding If the computer is turned on, but not responding to software or keyboard commands, turn off the computer by using the standard shutdown procedure:

1. Save your work and close all open applications. 2. Shut down the computer through the operating system by clicking Start, clicking the arrow next to the Lock button, and then clicking Shut Down. 44 Getting Started 435816-001.book Page 5 Thursday, December 7, 2006 11:50 AM Troubleshooting If you are unable to shut down the computer with this procedure, try the following emergency shutdown procedures in the sequence provided:

CAUTION: Using one of the following emergency shutdown procedures will result in the loss of unsaved information. Press ctrl+alt+delete. Then, in the lower-right corner of the screen, click the Power button. Press and hold the power button for at least 5 seconds. Disconnect the computer from external power and remove the battery. The computer is unusually warm It is normal for the computer to feel warm to the touch while it is in use. But if the computer feels unusually warm, it may be overheating because a vent is blocked. If you suspect that the computer is overheating, allow the computer to cool to room temperature. Then be sure to keep all vents free from obstructions while you are using the computer. CAUTION: To prevent overheating, do not obstruct vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as such as an adjoining printer, or a soft surface, such as pillows or thick rugs or clothing, to block airflow. The fan in the computer starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. Getting Started 45 435816-001.book Page 6 Thursday, December 7, 2006 11:50 AM Troubleshooting An external device is not working Follow these suggestions if an external device does not function as expected:

Turn on the device as instructed in the device user guide. Some devices may not be powered by the computer, and must be turned on before the computer is turned on. Be sure that all device connections are secure. Be sure that the device is receiving electrical power. Be sure that the device, especially if it is an older one, is compatible with your operating system. For compatibility information, refer to the device manufacturers Web site. Be sure that the correct drivers are installed and updated. Drivers may be available on a disc included with the device or on the device manufacturers Web site. For more information about updating drivers, select Start > Help and Support. The WLAN connection is not working If a WLAN connection is not working as expected, follow these suggestions:

Be sure that the wireless light on the computer is on. If the light is off, press the wireless button to turn it on. Be sure that the computer wireless antennae are free from obstructions. Be sure that the cable or DSL modem and its power cord are properly connected, and the lights are on. 46 Getting Started 435816-001.book Page 7 Thursday, December 7, 2006 11:50 AM Troubleshooting If applicable, be sure that the wireless router (access point) is turned on and properly connected to the DSL or the cable modem. Disconnect and then reconnect all cables, and turn the power off and then back on. For information on setting up a home wireless network connection, visit http://www.hp.com/go/techcenter/wireless

(English only). For information on activating broadband wireless service, refer to the mobile network operator information included with your computer. Help and Support If the preceding questions and solutions did not address your problem, access Help and Support by selecting Start > Help and Support. Help and Support provides the following assistance:

Information about the computer, such as model and serial number, installed software, hardware components, and specifications Answers to questions about using the computer Product information to help you learn to use the computer and operating system features Updates for the operating system, device drivers, and software provided on the computer Checkups for computer functionality Automated and interactive troubleshooting, repair solutions, and system recovery procedures Links to community forums of IT experts Getting Started 47 435816-001.book Page 8 Thursday, December 7, 2006 11:50 AM Troubleshooting Contacting technical support If the computer is connected to the Internet, select Start > Help and Support > Contact support to get online help or to access the technical support telephone numbers. For the fastest possible resolution of your problem, have the computer and the following information available when you call or e-mail:

Product name located on the display or keyboard. Serial number (s/n) listed on the service tag. The service tag label is on the bottom of the computer. To display the service tag information on the computer screen, select Start > Help and Support > System Information. Date the computer was purchased. Conditions under which the problem occurred. Error messages that have been displayed. The manufacturer and model of the printer or other accessories connected to the computer. Operating system version number and registration number. To display the operating system version number and registration number, select Start > Help and Support >

System Information. (On some models, the registration number may be identified in the Operating System table as the Product Id). 48 Getting Started 435816-001.book Page 1 Thursday, December 7, 2006 11:50 AM A Connect to the Internet from your home The computer includes hardware and software that allows you to connect to the Internet. Before you can access the Internet, you must choose an Internet service provider (ISP) and choose the type of Internet connection you want, such as broadband

(wired or wireless) or dial-up. Internet hardware and software features vary depending on the computer model and your location. Choosing an ISP You must set up Internet service before you can connect to the Internet. The computer includes the New Connection Wizard to help you set up a new Internet account or configure the computer to use an existing account. Getting Started A1 435816-001.book Page 2 Thursday, December 7, 2006 11:50 AM Connect to the Internet from your home Using the New Connection Wizard The New Connection Wizard works under the following conditions:

You already have an account with an ISP. You have a disc from an ISP. You do not have an Internet account and would like to select an ISP from the list provided within the wizard. You have selected an unlisted ISP and the ISP has provided you with such information as a specific IP address and POP3 and SMTP settings. To access the New Connection Wizard, select Start > Help and Support. If you are prompted within the wizard to choose between enabling or disabling the Windows Firewall, choose to enable the firewall. Choosing the type of Internet connection You can choose one or more of the following methods to connect to the Internet:

Broadband serviceHigh-speed Internet access is provided by an ISP through one of the following services:

Cable modem Digital Subscriber Line (DSL) Satellite Other services Broadband service may require additional hardware and/or software provided by the ISP. A2 Getting Started 435816-001.book Page 3 Thursday, December 7, 2006 11:50 AM Connect to the Internet from your home WLANInternet connection through a WLAN requires broadband wired service with an ISP as well as a wireless router (purchased separately). To learn about setting up wireless access, see the HP Web site at http://www.hp.com/go/techcenter/wireless (English only). WWANThis broadband wireless connection allows your computer to stay connected to the Internet over large geographic areas while the computer is in motion, such as in a car or train. WWAN capability requires an integrated HP Broadband Wireless Module (select models only) and service from a mobile network operator. For information on activating broadband wireless service, refer to the mobile network operator information included with your computer or see the HP Web site at http://www.hp.com/go/broadbandwireless

(English only). Dial-upYou can access the Internet by dialing in to a service provider using a modem cable connected to the RJ-11

(modem) jack. Getting Started A3 435816-001.book Page 4 Thursday, December 7, 2006 11:50 AM 435816-001.book Page 1 Thursday, December 7, 2006 11:50 AM B Backup and recovery Creating recovery discs After setting up the computer for the first time, be sure to create a set of recovery discs of the full factory image. The recovery discs are used to start up (boot) the computer and recover the operating system and software to factory settings in case of system instability or failure. Note the following guidelines before creating recovery discs:

You will need high-quality CD-R, DVD-R, or DVD+R media (purchased separately). Formatted DVDRW discs and DVDRW double-layer discs are not compatible with HP Backup & Recovery Manager. The computer must be connected to AC power during the process. Only one set of recovery discs can be created per computer. Number each disc before inserting it into the optical drive of the computer. If necessary, you can cancel the disc creation before you have finished creating the recovery discs. The next time you select Create a set of recovery discs

(Recommended), you will be prompted to continue the disc creation. Getting Started B1 435816-001.book Page 2 Thursday, December 7, 2006 11:50 AM Backup and recovery To create a set of recovery discs,:

1. Select Start > All Programs > HP Backup & Recovery >

Backup & Recovery Manager. 2. Click Next. 3. Click Create a set of recovery discs (Recommended), and then click Next. 4. Follow the on-screen instructions. Backing up your information You can only recover files that you have previously backed up. HP recommends that you use HP Backup & Recovery Manager to create an entire drive backup as soon as you set up your computer. With HP Backup & Recovery Manager, you can perform the following tasks:

Backing up your information regularly to protect your important system files Creating system recovery points that allow you to reverse undesirable changes to your computer by restoring the computer to an earlier state Scheduling backups at specific intervals or events When to back up On a regularly scheduled basis Set reminders to back up your information periodically. Before the computer is repaired or restored Before you add or modify hardware or software B2 Getting Started 435816-001.book Page 3 Thursday, December 7, 2006 11:50 AM Backup and recovery Back up suggestions Create a set of recovery discs using HP Backup & Recovery Manager. Create system recovery points using HP Backup & Recovery Manager, and periodically copy them to disc. Store personal files in the Documents folder and back up these folders periodically. Back up templates stored in their associated programs. Save customized settings in a window, toolbar, or menu bar by taking a screen shot of your settings. The screen shot can be a time saver if you have to reset your preferences. To copy the screen and paste it into a word-processing document:

1. Display the screen. 2. Copy the screen. To copy only the active window, press alt+fn+prt sc. To copy the entire screen, press fn+prt sc. 3. Open a word-processing document, and then select Edit >

Paste. Before you can perform backup and recovery procedures, the computer must be connected to external power. Drivers, utilities, and applications installed by HP can be copied to a CD or to a DVD using HP Backup & Recovery Manager. Getting Started B3 435816-001.book Page 4 Thursday, December 7, 2006 11:50 AM Backup and recovery Backing up specific files or folders You can back up specific files or folders to the recovery partition on the hard drive, to an optional external hard drive, or to optical discs (CDs or DVDs). This process will take several minutes, depending on the file size and the speed of the computer. To back up specific files or folders:

1. Select Start > All Programs > HP Backup & Recovery >

Backup & Recovery Manager. 2. Click Next. 3. Click Create or manage backups, and then click Next. 4. Click Back up user created files and folders and then click Next. 5. Follow the on-screen instructions. Backing up the entire hard drive When you perform a complete backup of the hard drive, you are saving the full factory image, including the Windows operating system, software applications, and all personal files and folders. A copy of the entire hard drive image can be stored on another hard drive, on a network drive, or on recovery discs that you create. This process may take over an hour, depending on your computer speed and the amount of data being stored. B4 Getting Started 435816-001.book Page 5 Thursday, December 7, 2006 11:50 AM Backup and recovery To back up your entire hard drive:

1. Select Start > All Programs > HP Backup & Recovery >

Backup & Recovery Manager. 2. Click Next. 3. Click Create or manage backups, and then click Next. 4. Click Create or manage Entire Drive Backups, and then click Next. 5. Follow the on-screen instructions. Creating recovery points When you back up modifications since your last backup, you are creating system recovery points. This allows you to save a snapshot of your hard drive at a specific point in time. You can then recover back to that point if you want to reverse subsequent changes made to your system. The first system recovery point, a snapshot of the entire image, is automatically created the first time you perform a backup. Subsequent recovery points make a copy of changes made after that time. HP recommends that you create recovery points at the following times:

Before you add or extensively modify software or hardware Periodically, whenever the system is performing optimally Recovering to an earlier recovery point does not affect data files or e-mails created since that recovery point. Getting Started B5 435816-001.book Page 6 Thursday, December 7, 2006 11:50 AM Backup and recovery To create a system recovery point:

1. Select Start > All Programs > HP Backup & Recovery >

Backup & Recovery Manager. 2. Click Next. 3. Click Create or manage backups, and then click Next. 4. Click Create or manage Recovery Points, and then click Next. 5. Follow the on-screen instructions. Scheduling backups Use HP Backup Scheduler to schedule backups for the entire system, for recovery points, or for specific files and folders. With this tool, you can schedule backups at specific intervals (daily, weekly or monthly) or at specific events, such as at system restart or when you dock to an optional docking station (select models only). To schedule backups:

1. Select Start > All Programs > HP Backup & Recovery >

HP Backup Scheduler. 2. Follow the on-screen instructions. B6 Getting Started 435816-001.book Page 7 Thursday, December 7, 2006 11:50 AM Backup and recovery Performing a recovery You can only recover files that you have previously backed up. HP recommends that you use HP Backup & Recovery Manager to create an entire drive backup as soon as you set up your computer. HP Backup & Recovery Manager helps you with the following tasks for safeguarding your information and restoring it in case of a system failure:

Recovering important filesThis feature helps you reinstall important files without performing a full system recovery. Performing a full system recoveryWith HP Backup &

Recovery Manager, you can recover your full factory image if you experience system failure or instability. HP Backup &

Recovery Manager works from a dedicated recovery partition on the hard drive or from recovery discs you create. Performing a recovery from the recovery discs To perform a recovery from the recovery discs, follow these steps:

1. Back up all personal files. 2. Insert the first recovery disc into the optical drive and restart the computer. 3. Follow the on-screen instructions. Getting Started B7 435816-001.book Page 8 Thursday, December 7, 2006 11:50 AM Backup and recovery Performing a recovery from the hard drive There are 2 ways to initiate a recovery from the hard drive:

From within Windows From the recovery partition Initiating a recovery in Windows To initiate a recovery in Windows, follow these steps:

1. Back up all personal files. 2. Select Start > All Programs > HP Backup & Recovery >

Backup & Recovery Manager. 3. Click Next. 4. Click Perform a recovery, and then click Next. 5. Follow the on-screen instructions. Initiating a recovery from the hard drive recovery partition To initiate a recovery from the hard drive recovery partition, follow these steps:

1. Back up all personal files. 2. Restart the computer, and then press f11 before the Windows operating system loads. 3. Click a recovery option, and then click Next. 4. Follow the on-screen instructions. B8 Getting Started 435816-001.book Page 1 Thursday, December 7, 2006 11:50 AM C Specifications Operating environment The operating environment information in the following table may be helpful if you plan to use or transport the computer in extreme environments. Factor Temperature Metric U.S. Operating (not writing to optical disc) 0C to 35C Operating (writing to optical disc) 5C to 35C 32F to 95F 41F to 95F Nonoperating

-20C to 60C

-4F to 140F Relative humidity (noncondensing) Operating Nonoperating 10% to 90%

10% to 90%

5% to 95%

5% to 95%

Maximum altitude (unpressurized) Operating (14.7 to 10.1 psia*)

-15 m to 3,048 m -50 ft to 10,000 ft Nonoperating (14.7 to 4.4 psia*)

-15 m to 12,192 m -50 ft to 40,000 ft

*Pounds per square inch absolute (psia) is a unit of measurement for altitude. Getting Started C1 435816-001.book Page 2 Thursday, December 7, 2006 11:50 AM Specifications Rated input power The power information in this section may be helpful if you plan to travel internationally with the computer. The computer operates on DC power, which can be supplied by an AC or a DC power source. Although the computer can be powered from a standalone DC power source, it should be powered only with an AC adapter or a DC power source supplied and approved by HP for use with this computer. The computer is capable of accepting DC power within the following specifications. Input power Operating voltage Operating current Rating 18.5 V dc @ 3.5 A - 65 W 3.5 A This product is designed for IT power systems in Norway with phase-to-phase voltage not exceeding 240 V rms. C2 Getting Started 435816-001.book Page 1 Thursday, December 7, 2006 11:50 AM Index Bluetooth 35 Bluetooth compartment, identifying 27 buttons info 22 power 17, 22 presentation 22 TouchPad 22 volume mute 22 wireless 22 C cables and cords, power 42 compartments Bluetooth 27 memory module 27 WLAN 27 computer turn off 38 turn on 16 computer viruses 44 connecting the computer to external power 15 connecting to a computer network 35 1394 port, identifying 24 A AC adapter connecting 15 identifying 12 accessory battery connector, identifying 27 altitude specifications C1 antivirus software 44 audio-in (microphone) jack, identifying 24 audio-out (headphone) jack, identifying 24 B battery charging 16 indentifying 12 inserting 14 battery bay, identifying 27 battery light behavior 16 identifying 22, 23 battery release latch, identifying 27 bays battery 27 hard drive 27 Getting Started Index1 435816-001.book Page 2 Thursday, December 7, 2006 11:50 AM Index connectors accessory battery 27 docking 27 power 24 country-specific modem adapter 12 D devices, external, troubleshooting 46 display release latch, identifying 23 display, switching image 43 docking connector, identifying 27 drive light, identifying 22, 23 E environmental specifications C1 external devices, troubleshooting 46 external monitor port, identifying 26 F fingerprint reader, identifying 22 firewalls 32 H hard drive bay, identifying 27 Help and Support 47 Hibernation 43 humidity specifications C1 I IEC 60950 compliance 34 image, switching among display devices 43 info button, identifying 22 inserting the battery 14 internal microphone, identifying 22 Internet access A2 J jacks audio-in (microphone) 24 audio-out (headphone) 24 RJ-11 (modem) 25 RJ-45 (network) jack 26 S-Video-out 26 L labels, service tag 48 LAN (local area network) 35 latches battery release 27 display release 23 lights battery 16, 22, 23 drive 22, 23 power 17, 22, 23 wireless 22, 23 locating user guides 38 M Media Card Reader, identifying 25 memory module compartment, identifying 27 Index2 Getting Started 435816-001.book Page 3 Thursday, December 7, 2006 11:50 AM modem setting up Internet service A2 surge protection 32 modem cable 12 monitor, external 43, 46 N network jack 26 network, connecting computer to 35 New Connection Wizard A2 O operating environment specifications C1 operating system, version number 48 optical drive, identifying 25 overheating, computer 34, 45 P PC Card slot, identifying 24 ports 1394 24 external monitor 26 USB 24, 25 power running the computer on battery 16 turning on computer 17, 42 power button, identifying 22 power connector identifying 24 using 15 Index power cord connecting 15 identifying 12 power light 17, 42 power lights, identifying 22, 23 power surge 32 presentation button, identifying 22 printer 46 Product Id 48 R rated input power specifications C2 registration number, operating system 48 regulatory information notices 34 Regulatory, Safety and Envi-

ronmental Notices 34 RJ-11 (modem) jack, identifying 25 RJ-45 (network) jack, identifying 26 S Safety and Comfort Guide 33 scroll zone, TouchPad 22 serial number, computer 48 service tag 48 seurity cable slot, identifying 26 SIM slot, identifying 27 Sleep 43 slot, SIM 27 Getting Started Index3 435816-001.book Page 4 Thursday, December 7, 2006 11:50 AM Index software antivirus 31 setup 18 updates 37 speakers, identifying 23 specifications operating environment C1 rated input power C2 S-Video-out jack, identifying 26 T technical support 48 temperature safety considerations 34 specifications C1 troubleshooting 45 TouchPad buttons, identifying 22 TouchPad, identifying 22 TouchPad scroll zone, identifying 22 traveling with computer C2 troubleshooting display problems 43 external device problems 46 Hibernation or Sleep problems 43 overheating problems 45 resources 41 software problems 44 virus problems 44 wireless network problems 46 turning off computer 38 turning on computer 16, 42 U updates, software 37 USB ports, identifying 24, 25 user guides 38 V vents identifying 24, 27 precautions 45 viruses antivirus software 31 computer 44 volume mute button, identifying 22 volume scroll zone, identifying 22 W wireless button, identifying 22 wireless lights, identifying 22, 23 WLAN (wireless local area network) 35 WLAN antennae, identifying 28 WLAN module compartment 27 WWAN (wireless wide area network) 35 WWAN antenna 28 Index4 Getting Started

Regulatory, Safety and Environmental Notices User Guide Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Copyright 2007 Hewlett-Packard Development Company, L.P. Windows and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Intel is a trademark or registered trademark of Intel Corporation or its subsidiaries in the United States and other countries. ENERGY STAR is a U.S. registered mark of the United States Environmental Protection Agency. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Fifth Edition: June 2007 First Edition: January 2007 Document Part Number: 437312-005 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Table of contents 1 Regulatory notices Federal Communications Commission notice ............................................................................... 2 Modifications ........................................................................................................... 2 Cables ..................................................................................................................... 2 Declaration of Conformity for products marked with the FCC logo (United States only) ........................................................................................................................ 3 Products with wireless LAN devices or HP Broadband Wireless Modules ......................... 3 Brazilian notice ........................................................................................................................ 4 Wireless LAN certification markings ............................................................................ 4 Canadian notices ..................................................................................................................... 4 Avis Canadien ......................................................................................................................... 5 European Union notices ............................................................................................................ 5 Products with 2.4-GHz wireless LAN devices ................................................................ 6 France ...................................................................................................... 6 Italy .......................................................................................................... 6 Products with 5-GHz wireless LAN devices ................................................................... 6 Products with HP Broadband Wireless Modules ............................................................ 7 Ergonomics notice ..................................................................................................... 7 Germany .................................................................................................. 7 Indian notice ........................................................................................................................... 7 Japanese notices ...................................................................................................................... 7 Wireless LAN 802.11b devices .................................................................................. 8 Wireless LAN 802.11g devices .................................................................................. 8 Wireless LAN certification markings ............................................................................ 8 Bluetooth devices .................................................................................................... 10 Certification markings for Bluetooth devices ................................................................ 10 Korean notice ........................................................................................................................ 11 Singaporean wireless notice .................................................................................................... 11 Taiwan notice ........................................................................................................................ 11 Airline travel notice ................................................................................................................ 11 Battery notices ....................................................................................................................... 11 ENERGY STAR compliance ..................................................................................................... 12 Laser compliance ................................................................................................................... 12 Modem notices ...................................................................................................................... 13 Telecommunications device approvals ....................................................................... 13 U.S. modem statements ............................................................................................ 14 U.S. modem declarations ......................................................................................... 15 Canadian modem statements .................................................................................... 21 Japanese modem statements ..................................................................................... 21 ENWW iii Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

New Zealand modem statements .............................................................................. 22 Voice support .......................................................................................... 22 Power cord notice .................................................................................................................. 23 Japanese power cord notice ..................................................................................... 23 Macrovision Corporation notice ............................................................................................... 23 2 Safety notices Heat-related safety warning notice ........................................................................................... 24 Battery notices ....................................................................................................................... 24 Headset and earphone volume level notice ............................................................................... 24 Power cord notices ................................................................................................................. 25 Travel notice .......................................................................................................................... 25 Norway and Sweden: Cable grounding notice for products with a TV tuner .................................. 25 3 Environmental notices Battery disposal ..................................................................................................................... 26 Electronic hardware and battery recycling ................................................................................ 26 Disposal of waste equipment by users in private households in the European Union ....................... 26 Chinese material content declarations ....................................................................................... 27 Japanese material content declaration ...................................................................................... 29 United States mercury disposal ................................................................................................ 29 Perchlorate material - special handling may apply ...................................................................... 29 Index ................................................................................................................................. 30 iv ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

1 Regulatory notices This guide provides country- and region-specific nonwireless and wireless regulatory notices and compliance information for the computer product. Some of these notices may not apply to your product. One or more integrated wireless devices may be installed. In some environments, the use of wireless devices may be restricted. Such restrictions may apply onboard airplanes, in hospitals, near explosives, in hazardous locations, and so on. If you are uncertain of the policy that applies to the use of this product, ask for authorization to use it before you turn it on. To identify a hardware device, such as a wireless LAN (WLAN) network device, installed on the computer, open the Device Manager utility. In Windows Vista, follow these steps:

1. 2. In the left pane, click Device Manager. Select Start > Computer > System properties. In Windows XP Professional and Windows XP Home, follow these steps:

1. 2. Select Start > My Computer. If the left pane, select View System Information > Hardware tab > Device Manager. ENWW 1 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Federal Communications Commission notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio or television technician for help. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by HP may void the user's authority to operate the equipment. Cables To maintain compliance with FCC Rules and Regulations, connections to this device must be made with shielded cables having metallic RFI/EMI connector hoods. 2 Chapter 1 Regulatory notices ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Declaration of Conformity for products marked with the FCC logo

(United States only) This device may not cause harmful interference. This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions:

1. 2. This device must accept any interference received, including interference that may cause undesired operation. If you have questions about the product that are not related to this declaration, write to Hewlett-Packard Company P. O. Box 692000, Mail Stop 530113 Houston, TX 77269-2000 For questions regarding this FCC declaration, write to Hewlett-Packard Company P. O. Box 692000, Mail Stop 510101 Houston, TX 77269-2000 or call HP at 281-514-3333 To identify your product, refer to the part, series, or model number located on the product. Products with wireless LAN devices or HP Broadband Wireless Modules This device must not be co-located or operating in conjunction with any other antenna or transmitter. WARNING! Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation of tablet PCs and notebooks. During normal operation of tablet PCs: To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennae should not be less than 2.5 cm (1 inch). To identify the location of the wireless antennae, refer to the Tablet PC Tour user guide included with the computer. During normal operation of notebooks: To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennae should not be less than 20 cm (8 inches), including when the computer display is closed. To identify the location of the wireless antennae, refer to the Notebook Tour user guide included with the computer. CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15- to 5.25-GHz frequency range. The FCC requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-

channel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-

GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. ENWW Federal Communications Commission notice 3 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Brazilian notice Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Este equipamento atende aos limites de Taxa de Absoro Especfica referente exposio a campos eltricos, magnticos e eletromagnticos de radiofreqncias adotados pela ANATEL. Unless the computer has an Intel PRO/Wireless 2100 Wireless LAN radio or an Intel PRO/Wireless 2200 Wireless LAN radio, the Brazilian certification mark is located on the bottom of the computer. Wireless LAN certification markings The Intel PRO/Wireless 2100 Wireless LAN has the certification mark below:

The Intel PRO/Wireless 2200 Wireless LAN has the certification mark below:

Canadian notices This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Wireless operation is subject to 2 conditions. The first is that the wireless device may not cause interference. The second is that the wireless device must accept any interference, including interference that may cause undesired operation of the device. CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. The antennae for this device are not replaceable. Any attempt at user access will damage your computer. 4 Chapter 1 Regulatory notices ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

For radio devices in the 5250- to 5350-MHz and 5470- to 5725-MHz bands, the maximum gain as specified by the Canadian e.i.r.p. limit is noted below:

Broadcom 802.11a/b/g WLAN = 5.6 dBi Broadcom 4321AG 802.11a/b/g/draft-n Wi-Fi Adapter = 5.6 dBi Intel PRO/Wireless 3945ABG = 6 dBi Intel Wireless WiFi Link 4965AG = 6 dBi Intel Wireless WiFi Link 4965AGN = 6 dBi For radio devices in the 5725- to 5825-MHz band, the maximum gain permitted, as specified by the Canadian e.i.r.p. limits for point-to-point and non-point-to-point operation, is noted below:

Broadcom 802.11a/b/g WLAN = 5.8 dBi Broadcom 4321AG 802.11a/b/g/draft-n Wi-Fi Adapter = 5.8 dBi Intel PRO/Wireless 3945ABG = 6 dBi Intel Wireless WiFi Link 4965AG = 6 dBi Intel Wireless WiFi Link 4965AGN = 6 dBi Avis Canadien Cet appareil numrique de la classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. European Union notices Products bearing the CE marking comply with the following EU Directives:

Low Voltage Directive 2006/95/EC EMC Directive 2004/108/EC CE compliance of this product is valid only if powered with the correct CE-marked AC adapter provided by HP. If this product has telecommunications functionality, it also complies with the essential requirements of the following EU Directive:

R&TTE Directive 1999/5/EC Compliance with these directives implies conformity to harmonized European standards (European Norms) that are listed in the EU Declaration of Conformity issued by HP for this product or product family. This compliance is indicated by one of the following conformity markings placed on the product. ENWW Avis Canadien 5 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

The following CE marking is valid for non-telecommunications products and for EU harmonized telecommunications products, such as Bluetooth. Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany The following CE marking is valid for EU non-harmonized telecommunications products.

*If applicable, a notified body number is used. Refer to the regulatory label provided on this product. The telecommunications functionality of this product may be used in the following EU and EFTA countries:

Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, and United Kingdom. Products with 2.4-GHz wireless LAN devices France Italy L'utilisation de cet equipement (2.4GHz wireless LAN) est soumise certaines restrictions : cet equipement peut tre utilis l'interieur d'un batiment en utilisant toutes les frequences de 2400 a 2483.5MHz

(Chaine 113). Pour une utilisation en environnement exterieur, vous devez utiliser les frequences comprises entre 2454 a 2483.5-MHz (Chaine 1013). Pour les dernires restrictions, voir http://www.art-telecom.fr. For 2.4-GHz wireless LAN operation of this product, certain restrictions apply. This equipment may use the entire 2400-MHz to 2483.5-MHz frequency band (channels 1 through 13) for indoor applications. For outdoor use, the 2454-MHz to 2483.5-MHz frequency band (channels 10 through 13) may not be used. For the latest requirements, see http://www.art-telecom.fr. E'necessaria una concessione ministeriale anche per l'uso del prodotto. Verifici per favore con il proprio distributore o direttamente presso la Direzione Generale Pianificazione e Gestione Frequenze. License required for use. Verify with your dealer or directly with the General Direction for Frequency Planning and Management (Direzione Generale Pianificazione e Gestione Frequenze). Products with 5-GHz wireless LAN devices Frequency availability for 802.11a or 802.11h wireless LAN is not currently harmonized throughout the European Union. For compliance requirements, users should verify compliance with their supplier, local HP office, or telecommunications authority. 6 Chapter 1 Regulatory notices ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Products with HP Broadband Wireless Modules THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO FREQUENCY RADIATION. The HP Broadband Wireless Module in your notebook is a radio transmitter and receiver. The device is designed not to exceed the limits for exposure to radio frequency (RF) recommended by international guidelines (ICNIRP). These limits are part of comprehensive guidelines that establish permitted levels of RF radiation for the general population. The guidelines were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The device also meets the European R&TTE directives, including the protection of the health and the safety of the user and any other person. The exposure standard for mobile devices employs a unit of measurement known as the Specific Absorption Rate (SAR).* The SAR was obtained by testing the device at standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The SAR information for your computer, including the recommended minimum distance from the body, is available on the HP Web site at http://www.hp.com/broadbandwireless. The actual SAR of the device while operating can be well below the maximum value, because the device operates at multiple power levels and uses only the power required to reach the network. When installed in the notebook computer, this device meets RF exposure guidelines when the antennae are positioned at a minimum distance from the body. In order to transmit data or messages, this device requires a quality connection to the network. In some cases, transmission of data or messages may be delayed until such a connection becomes available. Be sure that the recommended distance is observed until the transmission is complete.

*The international guidelines state that the SAR limit for mobile devices used by the public is 2.0 watts/

kilogram (W/kg) averaged over 10 grams of body tissue. The guidelines incorporate a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. SAR values may vary depending on national reporting requirements and the network band. Ergonomics notice Germany Computers bearing the GS approval mark meet the applicable ergonomic requirements when used in conjunction with docking bases, keyboards, and monitors that bear the GS approval mark. Computers in a stand-alone mode are not intended for continuous use in an office environment. Indian notice The India Telegraph Act of 1885 requires that an IEEE 802.11a wireless LAN end user obtain a license. To obtain this license, please contact The Wireless Planning & Coordination Wing, Ministry of Communications, Sanchar Ghavan New Delhi. Japanese notices ENWW Indian notice 7 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Wireless LAN 802.11b devices Wireless LAN 802.11g devices Wireless LAN certification markings The Intel PRO/Wireless 2200b/g Wireless LAN has the certification mark below:

The Intel PRO/Wireless 2915a/b/g Wireless LAN has the certification mark below:

The Intel PRO/Wireless 3945a/b/g Wireless LAN has the certification mark below:

8 Chapter 1 Regulatory notices ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

The Intel Wireless WiFi Link 4965AG has the certification mark below:

The Intel Wireless WiFi Link 4965AGN has the certification mark below:

The Broadcom 802.11b/g Wireless LAN has the certification mark below:

The Broadcom 4311BG 802.11b/g Wireless LAN has the certification mark below:

The Broadcom 4311AG 802.11a/b/g Wireless LAN has the certification mark below:

The Broadcom 802.11a/b/g Wireless LAN has the certification mark below:

The Broadcom 802.11b/g Wireless LAN with Broadrange has the certification mark below:

ENWW Japanese notices 9 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

The Broadcom 802.11a/b/g Wireless LAN with Broadrange has the certification mark below:

Bluetooth devices Certification markings for Bluetooth devices The HP integrated module with Bluetooth has the certification mark below:

The HP integrated module with Bluetooth 2.0 has the certification mark below:

10 Chapter 1 Regulatory notices ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Korean notice Singaporean wireless notice Turn off any WWAN devices while you are onboard aircraft. The use of these devices onboard aircraft is illegal, may be dangerous to the operation of the aircraft, and may disrupt the cellular network. Failure to observe this instruction may lead to suspension or denial of cellular services to the offender, or legal action, or both. Users are reminded to restrict the use of radio equipment in fuel depots, chemical plants, and where blasting operations are in progress. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, no part of the human body should be allowed to come too close to the antenna during operation of the equipment. This device has been designed to comply with applicable requirements for exposure to radio waves, based on scientific guidelines that include margins intended to assure the safety of all people, regardless of health and age. These radio wave exposure guidelines employ a unit of measurement known as the specific absorption rate (SAR). Tests for SAR are conducted using standardized methods, with the phone transmitting at its highest certified power level in all used frequency bands. The SAR data information is based on CENELEC's standards EN50360 and EN50361, which use the limit of 2 watts per kilogram, averaged over 10 grams of tissue. Taiwan notice Airline travel notice Use of electronic equipment onboard commercial aircraft is at the discretion of the airline. Battery notices CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. For information about removing a battery, refer to the user guide included with the product. ENWW Korean notice 11 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

ENERGY STAR compliance Computers bearing the ENERGY STAR logo are compliant with the applicable U.S. Environmental Protection Agency (EPA) ENERGY STAR specifications for Notebook computers. The EPA ENERGY STAR logo does not imply endorsement by the EPA. As an ENERGY STAR Partner, HP has determined that the product meets the applicable ENERGY STAR guidelines for energy efficiency. Laser compliance This product may be provided with a device containing a laser that is classified as a Class 1 Laser Product in accordance with US FDA regulations and the IEC 60825-1. The product does not emit hazardous laser radiation. Each laser product complies with 21 CFR 1040.10 and 1040.11, except for deviations pursuant to Laser Notice No. 50, dated May 27, 2001; and with IEC 60825-1:1993/A2:2001. WARNING! Use of controls or adjustments, or performance of procedures other than those specified in the laser product installation guide, may result in hazardous radiation exposure. To reduce the risk of exposure to hazardous radiation:

Do not try to open the module enclosure. There are no user-serviceable components inside. Do not operate controls, make adjustments, or perform procedures to the laser device other than those specified in the laser product installation guide. Allow only authorized service providers to repair the unit. 12 Chapter 1 Regulatory notices ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Modem notices WARNING!

always follow basic safety precautions, including the following:

To reduce the risk of fire, electric shock, and injury to persons when using this device, Do not use this product near waterfor example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Avoid using this product during an electrical storm. There is a remote risk of electric shock from lightning. Do not use this product to report a gas leak while in the vicinity of the leak. Always disconnect the modem cable before opening the equipment enclosure or touching an uninsulated modem cable, jack, or internal component. If this product was not provided with a telephone line cord, use only No. 26 AWG or larger telecommunication line cord. Do not plug a modem or telephone cable into the RJ-45 (network) jack. SAVE THESE INSTRUCTIONS Telecommunications device approvals The telecommunications device in the computer is approved for connection to the telephone network in the countries and regions whose approval markings are indicated on the product label located on the bottom of the computer or on the modem. Refer to the user guide included with the product to ensure that the product is configured for the country or region in which the product is located. Selecting a country or region other than the one in which it is located may cause the modem to be configured in a way that violates the telecommunication regulations/

laws of that country or region. In addition, the modem may not function properly if the correct country or region selection is not made. If, when you select a country or region, a message appears that states that the country or region is not supported, this means that the modem has not been approved for use in this country or region and thus should not be used. ENWW Modem notices 13 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

U.S. modem statements This equipment complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA. On the bottom of the computer or on the modem is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. Provide this information to the telephone company if you are requested to do so. Applicable certification jack USOC = RJ11C. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all locations, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point

(e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label. If this HP equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But, if advance notice isn't practical, the telephone company will notify you as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes to its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted telephone service. If trouble is experienced with this equipment, call technical support. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. You should perform repairs only to the equipment specifically discussed in the Troubleshooting section of the user guide, if one is provided. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information. If your home has specially wired alarm equipment connected to the telephone line, ensure that the installation of this HP equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including a fax machine, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page, or on the first page of the transmission, the date and time it is sent and an identification of the business, other entity, or other individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges). In order to program this information into your fax machine, you should complete the steps outlined in the faxing software instructions. 14 Chapter 1 Regulatory notices ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

U.S. modem declarations Refer to the following modem vendor declarations for the modem device installed in your computer:

ENWW Modem notices 15 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

16 Chapter 1 Regulatory notices ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

ENWW Modem notices 17 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

18 Chapter 1 Regulatory notices ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

ENWW Modem notices 19 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

20 Chapter 1 Regulatory notices ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Canadian modem statements This equipment meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number, REN, is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices, subject only to the requirement that the sum of the RENs of all devices does not exceed 5. The REN for this terminal equipment is 1.0. Japanese modem statements If the computer does not have the Japanese certification mark on the bottom of the computer, refer to the appropriate certification marking below. The Japanese certification mark for the Agere Systems AC'97 modem is below:

The Japanese certification mark for the HDAUDIO Soft Data Fax Modem with SmartCP is below:

The Japanese certification mark for the Agere Systems HDA modem is below:

The Japanese certification mark for the HDAUDIO Soft Data Fax Modem with SmartCP is below:

ENWW Modem notices 21 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

New Zealand modem statements The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom's network services. This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for which it is designed. Telecom will accept no responsibility should difficulties arise in such circumstances. If this device is equipped with pulse dialing, note that there is no guarantee that Telecom lines will always continue to support pulse dialing. Use of pulse dialing, when this equipment is connected to the same line as other equipment, may give rise to bell tinkle or noise and may also cause a false answer condition. Should such problems occur, the user should not contact the Telecom Faults Service. Some parameters required for compliance with Telecom's Telepermit requirements are dependent on the equipment (PC) associated with this device. The associated equipment shall be set to operate within the following limits for compliance with Telecom's Specifications:

a. There shall be no more than 10 call attempts to the same number within any 30-minute period for any single manual call initiation. b. The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next attempt. c. Where automatic calls are made to different numbers, the equipment shall be set to go on-hook for a period of not less than 5 seconds between the end of one attempt and the beginning of the next attempt. d. The equipment shall be set to ensure that calls are answered between 3 and 30 seconds of receipt of ringing (So set between 2 and 10). Voice support All persons using this device for recording telephone conversations shall comply with New Zealand law. This requires that at least one party to the conversation is aware that it is being recorded. In addition, the Principles enumerated in the Privacy Act 1993 shall be complied with in respect to the nature of the personal information collected, the purpose for its collection, how it is to be used, and what is disclosed to any other party. This equipment shall not be set to make automatic calls to the Telecom 111' Emergency Service. 22 Chapter 1 Regulatory notices ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Power cord notice If you were not provided with a power cord for the computer or for an external power accessory intended for use with the computer, you should purchase a power cord that is approved for use in your country or region. The power cord must be rated for the product and for the voltage and current marked on the product's electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and current rating marked on the product. In addition, the diameter of the wire must be a minimum of 0.75 mm/18AWG, and the length of the cord must be between 1.5 m (5 ft) and 2 m (6 ft). If you have questions about the type of power cord to use, contact your authorized service provider. A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product. Japanese power cord notice Macrovision Corporation notice This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. ENWW Power cord notice 23 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

2 Safety notices Heat-related safety warning notice WARNING!

To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the AC adapter comply with the user-accessible surface temperature limits defined by the International Standard for Safety of Information Technology Equipment (IEC 60950). Battery notices To reduce the risk of fire or burns, do not disassemble, crush, or puncture a battery; short WARNING!

the external contacts on a battery; or dispose of a battery in fire or water. Do not expose a battery to temperatures above 60C (140F). WARNING! Keep the battery away from children. To reduce potential safety issues, only the battery provided with the computer, a WARNING!

replacement battery provided by HP, or a compatible battery purchased as an accessory from HP should be used with the computer. Headset and earphone volume level notice Listening to music at high volume levels and for extended durations can damage ones hearing. To reduce the risk of hearing damage, lower the volume to a safe, comfortable level and reduce the amount of time listening at high levels. For your own safety, before using headsets or earphones, always reset the volume. Some headphones are louder than other headphones, even if the volume control setting is the same. Changing the default audio or equalizer settings might lead to higher volume and should only be done with caution. For your own safety, headsets or earphones used with this product should comply with the headphone limits in EN 50332-2. If the computer includes a headset or earphones, this combination is in compliance to EN 50332-1. 24 Chapter 2 Safety notices ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Power cord notices WARNING!

To reduce the risk of electric shock or damage to the equipment:

Plug the power cord into an AC outlet that is easily accessible at all times. Disconnect power from the computer by unplugging the power cord from the AC outlet (not by unplugging the power cord from the computer). If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-

pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an important safety feature. To reduce potential safety issues, only the AC adapter provided with the computer, a WARNING!

replacement AC adapter provided by HP, or an AC adapter purchased as an accessory from HP should be used with the computer. Travel notice WARNING!

power the computer with a voltage converter kit sold for appliances. To reduce the risk of electric shock, fire, or damage to the equipment, do not attempt to Norway and Sweden: Cable grounding notice for products with a TV tuner CAUTION:

distribution system. To reduce potential safety issues, use a galvanic isolator when connecting to a cable ENWW Power cord notices 25 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

3 Environmental notices This chapter provides country- and region-specific environmental notices and compliance information. Some of these notices may not apply to your product. Battery disposal WARNING! When a battery has reached the end of its useful life, do not dispose of the battery in general household waste. Follow the local laws and regulations in your area for computer battery disposal. Electronic hardware and battery recycling HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, see the HP Web site at http://www.hp.com/recycle. Disposal of waste equipment by users in private households in the European Union This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service, or the shop where you purchased the product. 26 Chapter 3 Environmental notices ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Chinese material content declarations The Table of Toxic and Hazardous Substances/Elements and their Content As required by China's Management Methods for Controlling Pollution by Electronic Information Products Toxic and Hazardous Substances and Elements Lead

(Pb) Mercury

(Hg) Cadmium

(Cd) Hexavalen t Chromium

(Cr(VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE) Part Name Battery Cables Camera Chassis/Other Flash memory card reader Floppy disk drive Hard disk drive Headphones I/O PCAs Keyboard Liquid crystal display (LCD) panel X X X X X X X X X X X Media (CD/DVD/floppy) O Memory Motherboard, processor, heat sinks Mouse Optical disk drive Optional docking decice Power adapter Power supply Remote control Smart card/Java card reader Speakers, external TV tuner USB flash memory drive X X X X X X X X X X X X O O O O O O O O O O X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O ENWW Chinese material content declarations 27 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

USB flash memory driveUSB hub Web camera Wireless receiver Wireless cards X X X X O O O O O O O O O O O O O O O O O O O O O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T11363-2006. X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T11363-2006. All parts named in this table with an X are in compliance with the European Union's RoHS Legislation "Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment."

NOTE:

conditions of the product such as temperature and humidity. The referenced Environmental Protection Use Period Marking was determined according to normal operating use 28 Chapter 3 Environmental notices ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Japanese material content declaration A Japanese regulatory requirement, defined by specification JIS C 0950, 2005, mandates that manufacturers provide material content declarations for certain categories of electronic products offered for sale after July 1, 2006. To view the JIS C 0950 material declaration for this product, see the HP Web site at http://www.hp.com/go/jisc0950. United States mercury disposal This computer contains mercury in the fluorescent lamp of the computer display, which may require special handling when the computer has reached the end of its useful life. Because of environmental considerations, local authorities may regulate the disposal of the mercury. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance (EIA) at http://www.eiae.org. Perchlorate material - special handling may apply See http://www.dtsc.ca.gov/hazardouswaste/perchlorate. This products real-time clock battery or coin cell battery may contain perchlorate and may require special handling when recycled or disposed of in California. ENWW Japanese material content declaration 29 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Index Symbols/Numerics 2.4-GHz wireless LAN devices 6 A airline travel notice 11 B battery disposal notice 26 battery notice 11, 24 Brazilian notice 4 C cable grounding notice 25 Canadian modem statement 21 Canadian notices 4 Chinese Material Content Declarations 27 D Declaration of Conformity 3 disposal notices battery 26 equipment 26 mercury 29 E electronic hardware and battery recycling 26 ENERGY STAR compliance 12 environmental notices 26 equipment disposal notice 26 ergonomics notice 7 European Union notices 5 F Federal Communications Commission cables 2 modifications 2 notice 2 New Zealand 22 U.S. 14 France, 2.4-GHz wireless LAN devices 6 modifications, Federal Communications Commission 2 G GS Notice 7 H hardware device, identifying 1 headset and earphone volume level notice 24 I Indian notice 7 Italy, 2.4-GHz wireless LAN devices 6 J Japanese material content declaration 29 Japanese modem statement 21 Japanese notice 7 Japanese power cord notice 23 K Korean notice 11 L laser safety notice 12 M Macrovision Corporation notice 23 mercury disposal notice 29 modem notices 13 modem statements Canadian 21 Japanese 21 N New Zealand modem statement 22 notices airline travel 11 battery 11, 24, 26 Brazilian 4 Canadian 4 environmental 26 equipment disposal 26 ergonomics 7 European Union 5 Federal Communications Commission 2 headset and earphone volume level 24 Indian 7 Japanese 7 Japanese power cord 23 Korean 11 laser safety 12 Macrovision Corporation 23 mercury disposal 29 modem 13 perchlorate material 29 power cords 23, 25 Singaporean 11 Taiwan 11 travel 25 P power cord notice 23, 25 S Singaporean wireless notice 11 30 Index ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

T Taiwan notice 11 travel notice 25 TV tuner, cable grounding notice 25 U U.S. modem statement 14 V voice support 22 W wireless LAN devices 3 ENWW Index 31 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Regulatory Statements to be included in the Users Guide for Sputnik USA-Federal Communications Commission (FCC) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna

-Increase the distance between the equipment and the receiver.

-Connect the equipment to outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Caution: Exposure to Radio Frequency Radiation. During normal operation of notebooks:

To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennae should not be less than 20 cm (8 inches), including when the computer display is closed. To identify the location of the wireless antennae, refer to the Notebook Tour user guide included with the computer. This device must not be co-located or operating in conjunction with any other antenna or transmitter. During normal operation of tablet PCs:

To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennae should not be less than 2.5 cm (1 inch). For lap-held operation, this notebook has been tested and meets the FCC RF exposure limits. Nevertheless, the notebook shall be used in such a manner that the potential for human contact during normal operation is minimized. To identify the location of the wireless antennae, refer to the Tablet PC Tour user guide included with the computer. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except for optional Bluetooth transmitter (FCC ID: QDS-

BRCM1018).

Regulatory, Safety and Environmental Notices User Guide Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Copyright 2007 Hewlett-Packard Development Company, L.P. Windows and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Intel is a trademark or registered trademark of Intel Corporation or its subsidiaries in the United States and other countries. Energy Star is a U.S. registered mark of the United States Environmental Protection Agency. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Second Edition: January 2007 Document Part Number: 437312-002 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Table of contents 1 Regulatory notices Federal Communications Commission notice ...................................................................................... 2 Modifications ........................................................................................................................ 2 Cables .................................................................................................................................. 2 Declaration of Conformity for products marked with the FCC logo (United States only) ..................................................................................................................................... 3 Products with wireless LAN devices .................................................................................... 3 Brazilian notice ..................................................................................................................................... 4 Wireless LAN certification markings .................................................................................... 4 Canadian notices .................................................................................................................................. 4 Avis Canadien ...................................................................................................................................... 5 European Union notices ....................................................................................................................... 5 Products with 2.4-GHz wireless LAN devices ...................................................................... 6 France ................................................................................................................. 6 Italy ...................................................................................................................... 6 Products with 5-GHz wireless LAN devices ......................................................................... 6 Ergonomics notice ............................................................................................................... 6 Germany ............................................................................................................. 6 Indian notice ......................................................................................................................................... 7 Japanese notices ................................................................................................................................. 7 Wireless LAN 802.11b devices ............................................................................................ 7 Wireless LAN 802.11g devices ............................................................................................ 7 Wireless LAN certification markings .................................................................................... 7 Bluetooth devices ................................................................................................................ 9 Certification markings for Bluetooth devices ........................................................................ 9 Korean notice ..................................................................................................................................... 10 Singaporean wireless notice .............................................................................................................. 10 Taiwan notice ..................................................................................................................................... 10 Airline travel notice ............................................................................................................................. 10 Battery notices .................................................................................................................................... 10 Energy Star compliance ..................................................................................................................... 11 Laser compliance ............................................................................................................................... 11 Modem notices ................................................................................................................................... 12 Telecommunications device approvals .............................................................................. 12 U.S. modem statements .................................................................................................... 13 U.S. modem declarations .................................................................................................. 14 Canadian modem statements ............................................................................................ 20 Japanese modem statements ............................................................................................ 20 New Zealand modem statements ...................................................................................... 21 ENWW iii Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Voice support .................................................................................................... 21 Power cord notice ............................................................................................................................... 22 Japanese power cord notice .............................................................................................. 22 Macrovision Corporation notice .......................................................................................................... 22 2 Safety notices Battery notices .................................................................................................................................... 23 Headset and earphone volume level notice ....................................................................................... 23 Power cord notices ............................................................................................................................. 23 Travel notice ....................................................................................................................................... 24 3 Environmental notices Battery disposal .................................................................................................................................. 25 Electronic hardware and battery recycling ......................................................................................... 25 Disposal of waste equipment by users in private households in the European Union ....................... 25 Chinese material content declarations ............................................................................................... 26 Japanese material content declaration ............................................................................................... 28 United States mercury disposal .......................................................................................................... 28 Perchlorate material - special handling may apply ............................................................................. 28 Index ................................................................................................................................................................. 29 iv ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

1 Regulatory notices This guide provides country-specific nonwireless and wireless regulatory notices and compliance information for the computer product. Some of these notices may not apply to your product. One or more integrated wireless devices may be installed. In some environments, the use of wireless devices may be restricted. Such restrictions may apply onboard airplanes, in hospitals, near explosives, in hazardous locations, and so on. If you are uncertain of the policy that applies to the use of this product, ask for authorization to use it before you turn it on. To identify a hardware device, such as a wireless LAN (WLAN) network device, installed on the computer, open the Device Manager utility. In Windows Vista, follow these steps:

1. 2. Select Start > Computer > System properties. In the left pane, click Device Manager. In Windows XP Professional and Windows XP Home, follow these steps:

1. 2. Select Start > My Computer. If the left pane, select View System Information > Hardware tab > Device Manager. ENWW 1 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Federal Communications Commission notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio or television technician for help. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by HP may void the user's authority to operate the equipment. Cables To maintain compliance with FCC Rules and Regulations, connections to this device must be made with shielded cables having metallic RFI/EMI connector hoods. 2 Chapter 1 Regulatory notices ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Declaration of Conformity for products marked with the FCC logo

(United States only) This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions:

1. 2. This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. If you have questions about the product that are not related to this declaration, write to Hewlett-Packard Company P. O. Box 692000, Mail Stop 530113 Houston, TX 77269-2000 For questions regarding this FCC declaration, write to Hewlett-Packard Company P. O. Box 692000, Mail Stop 510101 Houston, TX 77269-2000 or call HP at 281-514-3333 To identify your product, refer to the part, series, or model number located on the product. Products with wireless LAN devices WARNING! Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation of tablet PCs and notebooks. During normal operation of tablet PCs: To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennae should not be less than 2.5 cm (1 inch). To identify the location of the wireless antennae, refer to the Tablet PC Tour user guide included with the computer. During normal operation of notebooks: To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennae should not be less than 20 cm

(8 inches), including when the computer display is closed. To identify the location of the wireless antennae, refer to the Notebook Tour user guide included with the computer. CAUTION When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15- to 5.25-GHz frequency range. The FCC requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. ENWW Federal Communications Commission notice 3 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Brazilian notice Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Unless the computer has an Intel PRO/Wireless 2100 Wireless LAN radio or an Intel PRO/Wireless 2200 Wireless LAN radio, the Brazilian certification mark is located on the bottom of the computer. Wireless LAN certification markings The Intel PRO/Wireless 2100 Wireless LAN has the certification mark below:

The Intel PRO/Wireless 2200 Wireless LAN has the certification mark below:

Canadian notices This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Wireless operation is subject to 2 conditions. The first is that the wireless device may not cause interference. The second is that the wireless device must accept any interference, including interference that may cause undesired operation of the device. CAUTION When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. The antennae for this device are not replaceable. Any attempt at user access will damage your computer. For radio devices in the 5250- to 5350-MHz and 5470- to 5725-MHz bands, the maximum gain as specified by the Canadian e.i.r.p. limit is noted below:

Broadcom 802.11a/b/g WLAN = 5.6 dBi Broadcom 4321AG 802.11a/b/g/draft-n Wi-Fi Adapter = 5.6 dBi 4 Chapter 1 Regulatory notices ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Intel PRO/Wireless 3945ABG = 6 dBi Intel Wireless WiFi Link 4965AG = 6 dBi Intel Wireless WiFi Link 4965AGN = 6 dBi For radio devices in the 5725- to 5825-MHz band, the maximum gain permitted, as specified by the Canadian e.i.r.p. limits for point-to-point and non-point-to-point operation, is noted below:

Broadcom 802.11a/b/g WLAN = 5.8 dBi Broadcom 4321AG 802.11a/b/g/draft-n Wi-Fi Adapter = 5.8 dBi Intel PRO/Wireless 3945ABG = 6 dBi Intel Wireless WiFi Link 4965AG = 6 dBi Intel Wireless WiFi Link 4965AGN = 6 dBi Avis Canadien Cet appareil numrique de la classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. European Union notices Products bearing the CE marking comply with the following EU Directives:

Low Voltage Directive 73/23/EEC EMC Directive 89/336/EEC CE compliance of this product is valid only if powered with the correct CE-marked AC adapter provided by HP. If this product has telecommunications functionality, it also complies with the essential requirements of the following EU Directive:

R&TTE Directive 1999/5/EC Compliance with these directives implies conformity to harmonized European standards (European Norms) that are listed in the EU Declaration of Conformity issued by HP for this product or product family. This compliance is indicated by one of the following conformity markings placed on the product. The following CE marking is valid for non-telecommunications products and for EU harmonized telecommunications products, such as Bluetooth. Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany ENWW Avis Canadien 5 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

The following CE marking is valid for EU non-harmonized telecommunications products.

*If applicable, a notified body number is used. Refer to the regulatory label provided on this product. The telecommunications functionality of this product may be used in the following EU and EFTA countries:

Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, and United Kingdom. Products with 2.4-GHz wireless LAN devices France L'utilisation de cet equipement (2.4GHz wireless LAN) est soumise certaines restrictions : cet equipement peut tre utilis l'interieur d'un batiment en utilisant toutes les frequences de 2400 a 2483.5MHz (Chaine 113). Pour une utilisation en environnement exterieur, vous devez utiliser les frequences comprises entre 2454 a 2483.5-MHz (Chaine 1013). Pour les dernires restrictions, voir http://www.art-telecom.fr. For 2.4-GHz wireless LAN operation of this product, certain restrictions apply. This equipment may use the entire 2400-MHz to 2483.5-MHz frequency band (channels 1 through 13) for indoor applications. For outdoor use, the 2454-MHz to 2483.5-MHz frequency band (channels 10 through 13) may not be used. For the latest requirements, see http://www.art-telecom.fr. Italy E'necessaria una concessione ministeriale anche per l'uso del prodotto. Verifici per favore con il proprio distributore o direttamente presso la Direzione Generale Pianificazione e Gestione Frequenze. License required for use. Verify with your dealer or directly with the General Direction for Frequency Planning and Management (Direzione Generale Pianificazione e Gestione Frequenze). Products with 5-GHz wireless LAN devices Frequency availability for 802.11a or 802.11h wireless LAN is not currently harmonized throughout the European Union. For compliance requirements, users should verify compliance with their supplier, local HP office, or telecommunications authority. Ergonomics notice Germany Computers bearing the GS approval mark meet the applicable ergonomic requirements when used in conjunction with docking bases, keyboards, and monitors that bear the GS approval mark. Computers in a stand-alone mode are not intended for continuous use in an office environment. 6 Chapter 1 Regulatory notices ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Indian notice The India Telegraph Act of 1885 requires that an IEEE 802.11a wireless LAN end user obtain a license. To obtain this license, please contact The Wireless Planning & Coordination Wing, Ministry of Communications, Sanchar Ghavan New Delhi. Japanese notices Wireless LAN 802.11b devices Wireless LAN 802.11g devices Wireless LAN certification markings The Intel PRO/Wireless 2200b/g Wireless LAN has the certification mark below:

ENWW Indian notice 7 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

The Intel PRO/Wireless 2915a/b/g Wireless LAN has the certification mark below:

The Intel PRO/Wireless 3945a/b/g Wireless LAN has the certification mark below:

The Broadcom 802.11b/g Wireless LAN has the certification mark below:

The Broadcom 4311BG 802.11b/g Wireless LAN has the certification mark below:

The Broadcom 4311AG 802.11a/b/g Wireless LAN has the certification mark below:

The Broadcom 802.11a/b/g Wireless LAN has the certification mark below:

The Broadcom 802.11b/g Wireless LAN with Broadrange has the certification mark below:

8 Chapter 1 Regulatory notices ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

The Broadcom 802.11a/b/g Wireless LAN with Broadrange has the certification mark below:

Bluetooth devices Certification markings for Bluetooth devices The HP integrated module with Bluetooth has the certification mark below:

The HP integrated module with Bluetooth 2.0 has the certification mark below:

ENWW Japanese notices 9 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Korean notice Singaporean wireless notice Turn off any WWAN devices while you are onboard aircraft. The use of these devices onboard aircraft is illegal, may be dangerous to the operation of the aircraft, and may disrupt the cellular network. Failure to observe this instruction may lead to suspension or denial of cellular services to the offender, or legal action, or both. Users are reminded to restrict the use of radio equipment in fuel depots, chemical plants, and where blasting operations are in progress. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, no part of the human body should be allowed to come too close to the antenna during operation of the equipment. This device has been designed to comply with applicable requirements for exposure to radio waves, based on scientific guidelines that include margins intended to assure the safety of all people, regardless of health and age. These radio wave exposure guidelines employ a unit of measurement known as the specific absorption rate (SAR). Tests for SAR are conducted using standardized methods, with the phone transmitting at its highest certified power level in all used frequency bands. The SAR data information is based on CENELEC's standards EN50360 and EN50361, which use the limit of 2 watts per kilogram, averaged over 10 grams of tissue. Taiwan notice Airline travel notice Use of electronic equipment onboard commercial aircraft is at the discretion of the airline. Battery notices CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. For information about removing a battery, refer to the user guide included with the product. 10 Chapter 1 Regulatory notices ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Energy Star compliance Computers bearing the Energy Star logo are compliant with the U.S. Environmental Protection Agency

(EPA) Energy Star Computers Program 3.0. The EPA Energy Star logo does not imply endorsement by the EPA. As an Energy Star Partner, HP has determined that the product meets the Energy Star guidelines for energy efficiency. Laser compliance This product may be provided with a device containing a laser that is classified as a Class 1 Laser Product in accordance with US FDA regulations and the IEC 60825-1. The product does not emit hazardous laser radiation. Each laser product complies with 21 CFR 1040.10 and 1040.11, except for deviations pursuant to Laser Notice No. 50, dated May 27, 2001; and with IEC 60825-1:1993/A2:2001. WARNING! Use of controls or adjustments, or performance of procedures other than those specified in the laser product installation guide, may result in hazardous radiation exposure. To reduce the risk of exposure to hazardous radiation:

Do not try to open the module enclosure. There are no user-serviceable components inside. Do not operate controls, make adjustments, or perform procedures to the laser device other than those specified in the laser product installation guide. Allow only authorized service providers to repair the unit. ENWW Energy Star compliance 11 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Modem notices WARNING! To reduce the risk of fire, electric shock, and injury to persons when using this device, always follow basic safety precautions, including the following:

Do not use this product near waterfor example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Avoid using this product during an electrical storm. There is a remote risk of electric shock from lightning. Do not use this product to report a gas leak while in the vicinity of the leak. Always disconnect the modem cable before opening the equipment enclosure or touching an uninsulated modem cable, jack, or internal component. If this product was not provided with a telephone line cord, use only No. 26 AWG or larger telecommunication line cord. Do not plug a modem or telephone cable into the RJ-45 (network) jack. SAVE THESE INSTRUCTIONS Telecommunications device approvals The telecommunications device in the computer is approved for connection to the telephone network in the countries whose approval markings are indicated on the product label located on the bottom of the computer or on the modem. Refer to the user guide included with the product to ensure that the product is configured for the country in which the product is located. Selecting a country other than the one in which it is located may cause the modem to be configured in a way that violates the telecommunication regulations/laws of that country. In addition, the modem may not function properly if the correct country selection is not made. If, when you select a country, a message appears that states that the country is not supported, this means that the modem has not been approved for use in this country and thus should not be used. 12 Chapter 1 Regulatory notices ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

U.S. modem statements This equipment complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA. On the bottom of the computer or on the modem is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. Provide this information to the telephone company if you are requested to do so. Applicable certification jack USOC = RJ11C. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all locations, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label. If this HP equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But, if advance notice isn't practical, the telephone company will notify you as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes to its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted telephone service. If trouble is experienced with this equipment, call technical support. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. You should perform repairs only to the equipment specifically discussed in the Troubleshooting section of the user guide, if one is provided. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information. If your home has specially wired alarm equipment connected to the telephone line, ensure that the installation of this HP equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including a fax machine, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page, or on the first page of the transmission, the date and time it is sent and an identification of the business, other entity, or other individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges). In order to program this information into your fax machine, you should complete the steps outlined in the faxing software instructions. ENWW Modem notices 13 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

U.S. modem declarations Refer to the following modem vendor declarations for the modem device installed in your computer:

14 Chapter 1 Regulatory notices ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

ENWW Modem notices 15 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

16 Chapter 1 Regulatory notices ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

ENWW Modem notices 17 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

18 Chapter 1 Regulatory notices ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

ENWW Modem notices 19 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Canadian modem statements This equipment meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number, REN, is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices, subject only to the requirement that the sum of the RENs of all devices does not exceed 5. The REN for this terminal equipment is 1.0. Japanese modem statements If the computer does not have the Japanese certification mark on the bottom of the computer, refer to the appropriate certification marking below. The Japanese certification mark for the Agere Systems AC'97 modem is below:

The Japanese certification mark for the HDAUDIO Soft Data Fax Modem with SmartCP is below:

The Japanese certification mark for the Agere Systems HDA modem is below:

The Japanese certification mark for the HDAUDIO Soft Data Fax Modem with SmartCP is below:

20 Chapter 1 Regulatory notices ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

New Zealand modem statements The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom's network services. This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for which it is designed. Telecom will accept no responsibility should difficulties arise in such circumstances. If this device is equipped with pulse dialing, note that there is no guarantee that Telecom lines will always continue to support pulse dialing. Use of pulse dialing, when this equipment is connected to the same line as other equipment, may give rise to bell tinkle or noise and may also cause a false answer condition. Should such problems occur, the user should not contact the Telecom Faults Service. Some parameters required for compliance with Telecom's Telepermit requirements are dependent on the equipment (PC) associated with this device. The associated equipment shall be set to operate within the following limits for compliance with Telecom's Specifications:

a. b. There shall be no more than 10 call attempts to the same number within any 30-minute period for any single manual call initiation. The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next attempt. c. Where automatic calls are made to different numbers, the equipment shall be set to go on-hook for a period of not less than 5 seconds between the end of one attempt and the beginning of the next attempt. d. The equipment shall be set to ensure that calls are answered between 3 and 30 seconds of receipt of ringing (So set between 2 and 10). Voice support All persons using this device for recording telephone conversations shall comply with New Zealand law. This requires that at least one party to the conversation is aware that it is being recorded. In addition, the Principles enumerated in the Privacy Act 1993 shall be complied with in respect to the nature of the personal information collected, the purpose for its collection, how it is to be used, and what is disclosed to any other party. This equipment shall not be set to make automatic calls to the Telecom 111' Emergency Service. ENWW Modem notices 21 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Power cord notice If you were not provided with a power cord for the computer or for an external power accessory intended for use with the computer, you should purchase a power cord that is approved for use in your country. The power cord must be rated for the product and for the voltage and current marked on the product's electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and current rating marked on the product. In addition, the diameter of the wire must be a minimum of 0.75 mm/18AWG, and the length of the cord must be between 1.5 m (5 ft) and 2 m (6 ft). If you have questions about the type of power cord to use, contact your authorized service provider. A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product. Japanese power cord notice Macrovision Corporation notice This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. 22 Chapter 1 Regulatory notices ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

2 Safety notices Battery notices WARNING! To reduce the risk of fire or burns, do not disassemble, crush, or puncture a battery;

short the external contacts on a battery; or dispose of a battery in fire or water. Do not expose a battery to temperatures above 60C (140F). WARNING! Keep the battery away from children. WARNING! To reduce potential safety issues, only the battery provided with the computer, a replacement battery provided by HP, or a compatible battery purchased as an accessory from HP should be used with the computer. Headset and earphone volume level notice Listening to music at high volume levels and for extended durations can damage ones hearing. To reduce the risk of hearing damage, lower the volume to a safe, comfortable level and reduce the amount of time listening at high levels. For your own safety, headsets or earphones used with this product should comply with the headphone limits in clause 7 of EN 50332-2. If a headset or earphones are shipped with this product, they are in compliance to EN 50332-1. Power cord notices WARNING! To reduce the risk of electric shock or damage to the equipment:

Plug the power cord into an AC outlet that is easily accessible at all times. Disconnect power from the computer by unplugging the power cord from the AC outlet (not by unplugging the power cord from the computer). If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an important safety feature. WARNING! To reduce potential safety issues, only the AC adapter provided with the computer, a replacement AC adapter provided by HP, or an AC adapter purchased as an accessory from HP should be used with the computer. ENWW Battery notices 23 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Travel notice WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not attempt to power the computer with a voltage converter kit sold for appliances. 24 Chapter 2 Safety notices ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

3 Environmental notices This chapter provides country-specific environmental notices and compliance information. Some of these notices may not apply to your product. Battery disposal WARNING! When a battery has reached the end of its useful life, do not dispose of the battery in general household waste. Follow the local laws and regulations in your area for computer battery disposal. Electronic hardware and battery recycling HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, see the HP Web site at http://www.hp.com/recycle. Disposal of waste equipment by users in private households in the European Union This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service, or the shop where you purchased the product. ENWW Battery disposal 25 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Chinese material content declarations The Table of Toxic and Hazardous Substances/Elements and their Content As required by China's Management Methods for Controlling Pollution by Electronic Information Products 26 Chapter 3 Environmental notices ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

ENWW Chinese material content declarations 27 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Japanese material content declaration A Japanese regulatory requirement, defined by specification JIS C 0950, 2005, mandates that manufacturers provide material content declarations for certain categories of electronic products offered for sale after July 1, 2006. To view the JIS C 0950 material declaration for this product, see the HP Web site at http://www.hp.com/go/jisc0950. United States mercury disposal This computer contains mercury in the fluorescent lamp of the computer display, which may require special handling when the computer has reached the end of its useful life. Because of environmental considerations, local authorities may regulate the disposal of the mercury. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance (EIA) at http://www.eiae.org. Perchlorate material - special handling may apply See http://www.dtsc.ca.gov/hazardouswaste/perchlorate. This products real-time clock battery or coin cell battery may contain perchlorate and may require special handling when recycled or disposed of in California. 28 Chapter 3 Environmental notices ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Index Symbols/Numerics 2.4-GHz wireless LAN devices 6 A airline travel notice 10 B battery disposal notice 25 battery notice 10, 23 Brazilian notice 4 C Canadian modem statement 20 Canadian notices 4 Chinese Material Content Declarations 26 D Declaration of Conformity 3 disposal notices battery 25 equipment 25 mercury 28 E electronic hardware and battery recycling 25 Energy Star compliance 11 environmental notices 25 equipment disposal notice 25 ergonomics notice 6 European Union notices 5 F Federal Communications Commission cables 2 modifications 2 notice 2 ENWW France, 2.4-GHz wireless LAN devices 6 modifications, Federal Communications Commission 2 G GS Notice 6 H hardware device, identifying 1 headset and earphone volume level notice 23 I Indian notice 7 Italy, 2.4-GHz wireless LAN devices 6 J Japanese material content declaration 28 Japanese modem statement 20 Japanese notice 7 Japanese power cord notice 22 K Korean notice 10 L laser safety notice 11 M Macrovision Corporation notice 22 mercury disposal notice 28 modem notices 12 modem statements Canadian 20 Japanese 20 New Zealand 21 U.S. 13 N New Zealand modem statement 21 notices airline travel 10 battery 10, 23, 25 Brazilian 4 Canadian 4 environmental 25 equipment disposal 25 ergonomics 6 European Union 5 Federal Communications Commission 2 headset and earphone volume level 23 Indian 7 Japanese 7 Japanese power cord 22 Korean 10 laser safety 11 Macrovision Corporation 22 mercury disposal 28 modem 12 perchlorate material 28 power cords 22, 23 Singaporean 10 Taiwan 10 travel 24 P power cord notice 22, 23 S Singaporean wireless notice 10 Index 29 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

T Taiwan notice 10 travel notice 24 U U.S. modem statement 13 V voice support 21 W wireless LAN devices 3 30 Index ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Notebook Tour User Guide Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Copyright 2007 Hewlett-Packard Development Company, L.P. Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. SD Logo is a trademark of its proprietor. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: January 2007 Document Part Number: 431179-001 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Table of contents 1 Identifying Hardware 2 Top components TouchPad ............................................................................................................................................. 2 Keys ..................................................................................................................................................... 3 Hotkey quick reference ......................................................................................................................... 4 3 Display Display components ............................................................................................................................. 5 Quick Launch buttons ........................................................................................................................... 6 Media buttons ....................................................................................................................................... 7 Display lights ........................................................................................................................................ 8 Wireless antennae (select models only) ............................................................................................... 9 WWAN antenna ................................................................................................................................. 10 4 Front components 5 Rear components 6 Right-side components 7 Left-side components 8 Bottom components 9 Additional hardware components 10 Labels Index ................................................................................................................................................................... 20 ENWW iii Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

iv ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

1 Identifying Hardware To see a list of hardware installed in the computer:

1. 2. 3. 4. Select Start > Computer > Properties. In the left pane, click Hardware and Device Settings. In the Windows Security dialog box, click Allow. Select Hardware tab > Device Manager. You can also add hardware or modify device configurations using Device Manager. ENWW 1 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

2 Top components TouchPad Component

(1) TouchPad light

(2)

(3)

(4)

(5)

(6) TouchPad*

Left TouchPad button*

Right TouchPad button*

TouchPad scroll zone*

TouchPad on/off button Description Blue: TouchPad is enabled. Amber: TouchPad is disabled. Moves the pointer and selects or activates items on the screen. Functions like the left button on an external mouse. Functions like the right button on an external mouse. Scrolls up or down. Enables/disables the TouchPad.

*This table describes factory settings. To view and change pointing device preferences, select Start > Control Panel >

Hardware and Sound > Mouse. In the Windows Security dialog box, click Allow. 2 Chapter 2 Top components ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Keys Component Description

(1)

(2)

(3)

(4)

(5)

(6) esc key fn key Displays system information when pressed in combination with the fn key. Executes frequently used system functions when pressed in combination with a function key or the esc key. Windows logo key Displays the Microsoft Windows Start menu. Windows applications key Displays a shortcut menu for items beneath the pointer. Embedded numeric keypad keys Can be used like the keys on an external numeric keypad. Function keys Execute frequently used system functions when pressed in combination with the fn key. ENWW Keys 3 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Hotkey quick reference To perform this function Display information. Clear system information. Open the Help and Support Center. Open the Print Options window. Open a Web browser. Alternate between computer display and external display. Initiate the Sleep state. Initiate QuickLock. Decrease screen brightness. Increase screen brightness. Play, pause, or resume an audio CD or a DVD. Stop an audio CD or a DVD. Press fn+esc fn+esc or press enter fn+f1 fn+f2 fn+f3 fn+f4 fn+f5 fn+f6 fn+f7 fn+f8 fn+f9 fn+f10 Play the previous track or section on an audio CD or a DVD. fn+f11 Play the next track on an audio CD or a DVD. fn+12 4 Chapter 2 Top components ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

3 Display Display components Component Description

(1)

(2)

(3)

(4)

(5) Rotating hinge Internal display switch Swivels the display and converts the computer from notebook mode into tablet PC mode or vice versa. Turns off the display if the display is closed while the computer is turned on. Fingerprint reader Allows a fingerprint logon to Windows, instead of a password logon. Integrated camera (select models only) Records video and captures still photographs. Display release latch Opens the computer. ENWW Display components 5 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Quick Launch buttons Component

(1)

(2)

(3) Rotate button Mobility Center button Media button Description Switches the image between landscape and portrait orientation. Press to open Mobility Center. When the computer is On, the media button opens the music program or Media menu, allowing you to select a multimedia program. Off, the media button opens the music program or the Media menu, allowing you to select a multimedia program. In the Sleep state, the media button resumes from Sleep into Windows.

(4) DVD button When the computer is On, the DVD button opens the default DVD program to start a DVD in the optical drive. Off, the DVD button opens QuickPlay to start a DVD in the optical drive. If the QuickPlay software is not installed, the computer starts in Windows. In Hibernation, opens QuickPlay to start a DVD in the optical drive. If the QuickPlay software is not installed, the computer resumes from Hibernation. NOTE Refer to the QuickPlay online Help for details on using QuickPlay. 6 Chapter 3 Display ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Media buttons Component Description

(1) Previous/rewind button When a disc is playing in the optical drive:

(2) Play/pause button Press to play the previous track or chapter. Press fn+ this button to rewind. When a disc is in the optical drive and is Not playing, press to play the disc. Playing, press to pause the disc.

(3) Next/fast forward button When a disc is playing in the optical drive:

(4) Stop button Press once to play the next track or chapter. Press fn+ this button to fast forward. When a disc is playing in the optical drive, press to stop the current disc activity. ENWW Media buttons 7 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Display lights Component

(1) Power light*

(2) Battery light Description On: The computer is on. Blinking: The computer is in the Sleep state. Off: The computer is off or in Hibernation. On: A battery is charging. Blinking: A battery that is the only available power source has reached a low-battery condition. When the battery reaches a critical low-battery condition, the battery light begins blinking rapidly. Off: If the computer is plugged into an external power source, the light is turned off when all batteries in the computer are fully charged. If the computer is not plugged into an external power source, the light stays off until the battery reaches a low-battery condition.

(3)

(4)

(5)

(6)

(7) Drive light Rotate button light Blinking: The hard drive or optical drive is being accessed. On: The image is in landscape mode. [PLEASE VERIFY]

Mobility Center button light On: Mobility Center is open. [PLEASE VERIFY]

Media button light DVD button light On: QuickPlay media mode is open. [PLEASE VERIFY]

On: QuickPlay DVD mode is open. [PLEASE VERIFY]

8 Chapter 3 Display ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Wireless antennae (select models only) On select computer models, at least 2 antennae send and receive signals from one or more wireless devices. These antennae are not visible from the outside of the computer. To see wireless regulatory notices, refer to your region's section of the Regulatory, Safety and Environmental Notices located in the Help and Support Center. NOTE For optimal transmission, keep the areas immediately around the antennae free from obstructions. ENWW Wireless antennae (select models only) 9 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

WWAN antenna The wireless antenna inside the display enclosure allows you to connect to a wireless wide-area network

(WWAN), and then to the Internet, using the integrated HP Broadband Wireless module and service from a supported cellular network operator. For more information on HP Broadband Wireless and how to sign up for service, refer to the HP Broadband Wireless Getting Started guide included with your computer. 10 Chapter 3 Display ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

4 Front components Component

(1)

(2) Display release latch Power button*

Description Opens the computer. When the computer is Off, press to turn on the computer. On, press to enter Hibernation. In the Sleep state, briefly press to exit Sleep. In Hibernation, briefly press to exit Hibernation. If the computer has stopped responding and Microsoft Windows shutdown procedures cannot be used, press and hold the power button for at least 5 seconds to turn off the computer. Blue: An integrated wireless device, such as a wireless local area network (LAN) device and/or a Bluetooth device, is turned on. Amber: an integrated wireless device is turned off. Links the computer to the HP Remote Control. Connects an optional computer headset microphone, stereo array microphone, or monaural microphone. Produce sound when connected to optional powered stereo speakers, headphones, ear buds, a headset, or television audio.

(3) Wireless light

(4)

(5)

(6) Consumer infrared lens Audio-in (microphone) jack Audio-out (headphone) jack ENWW 11 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

5 Rear components Component

(1) Vent Description Enables airflow to cool internal components. CAUTION To prevent overheating, do not obstruct vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or thick rugs or clothing, to block airflow. NOTE The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation.

(2)

(3)

(4) RJ-11 (modem) jack USB port Security cable slot Connects a modem cable. Connects an optional USB device. Attaches an optional security cable to the computer. NOTE The security cable is designed to act as a deterrent, but may not prevent the computer from being mishandled or stolen. 12 Chapter 5 Rear components ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

6 Right-side components Component Description

(1) Previous/rewind button When a disc is playing in the optical drive:

(2) Play/pause button Press to play the previous track or chapter. Press fn+ this button to rewind. When a disc is in the optical drive and is Not playing, press to play the disc. Playing, press to pause the disc.

(3) Next/fast forward button When a disc is playing in the optical drive:

(4)

(5)

(6)

(7)

(8)

(9) Stop button Pen holder USB port Pen tether RJ-45 (network) jack Expansion port 3 Press once to play the next track or chapter. Press fn+ this button to fast forward. When a disc is playing in the optical drive, press to stop the current disc activity. Secures the pen to the computer. Connects an optional USB device. Connects the pen tether Connects a network cable. Connects the computer to an optional expansion product. ENWW 13 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Component Description

(10)

(11) External monitor port S-Video-out jack NOTE The computer has only one expansion port. The term expansion port 3 describes the type of expansion port. Connects an external VGA monitor or projector. Connects an optional S-Video device such as a television, VCR, camcorder, overhead projector, or video capture card.

(12) Vent Enables airflow to cool internal components. CAUTION To prevent overheating, do not obstruct vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or thick rugs or clothing, to block airflow. NOTE The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. 14 Chapter 6 Right-side components ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

7 Left-side components Component Power connector ExpressCard slot Digital Media Slot

(1)

(2)

(3)

(4)

(5)

(6) Digital Media Slot light Optical drive On: A digital card is being accessed. Reads an optical disc. Optical drive release button Releases the optical drive tray. Description Connects an AC adapter. Supports optional ExpressCard/54 cards. Supports the following optional digital card formats: Secure Digital

(SD) Memory Card, MultiMediaCard (MMC), Secure Digital Input/

Output (SD I/O), Memory Stick (MS), Memory Stick Pro (MSP), xD-

Picture Card (XD), xD-Picture Card (XD) Type M. ENWW 15 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

8 Bottom components Component

(1) Vents (3) Description Enable airflow to cool internal components. CAUTION To prevent overheating, do not obstruct vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or thick rugs or clothing, to block airflow. NOTE The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation.

(2)

(3)

(4)

(5) Hard drive bay Holds the hard drive. Optical drive release latch Releases the optical drive from the drive bay. Memory module compartment Contains the memory module slots. Mini Card compartment Holds a wireless LAN device (select models only). 16 Chapter 8 Bottom components ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Component Description NOTE To prevent an unresponsive system and the display of a warning message, replace with only a Mini Card device authorized for use in the computer by the governmental agency that regulates wireless devices in your country. If you replace the device and then receive a warning message, remove the device to restore computer functionality. Then contact Customer Care through the Help and Support Center.

(6)

(7) Battery release latch Battery bay Releases the battery from the battery bay. Holds the battery. ENWW 17 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

9 Additional hardware components Component Description

(1)

(2)

(3)

(4)

(5) Power cord*

AC adapter Battery*

Modem cable*

Country-specific modem cable adapter (select models only) Connects an AC adapter to an AC outlet. Converts AC power to DC power. Powers the computer when the computer is not plugged into external power. Connects the internal modem to an RJ-11 telephone jack or to a country-specific modem adapter. Adapts the modem cable to a non-RJ-11 telephone jack.

*Modem cables, batteries, and power cords vary in appearance by region and country. 18 Chapter 9 Additional hardware components ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

10 Labels The labels affixed to the computer provide information you may need when you troubleshoot system problems or travel internationally with the computer. Service tagProvides the product brand and series name, serial number (s/n), and product number (p/n) of your computer. Have this information available when you contact Customer Care. The service tag label is affixed to the bottom of the computer. Microsoft Certificate of AuthenticityContains the Microsoft Windows Product Key. You may need the Product Key to update or troubleshoot the operating system. This certificate is affixed to the bottom of the computer. Regulatory labelProvides regulatory information about the computer. The regulatory label is affixed inside the hard drive bay. Modem approval labelProvides regulatory information about the modem and lists the agency approval markings required by some of the countries in which the modem has been approved for use. You may need this information when traveling internationally. The modem approval label is affixed inside the hard drive bay. Wireless certification label(s) (select models only)Provide information about optional wireless devices and the approval markings of some of the countries in which the devices have been approved for use. An optional device may be a wireless local area network (WLAN) device or an optional Bluetooth device. If your computer model includes one or more wireless devices, one or more certification labels are included with your computer. You may need this information when traveling internationally. Wireless certification labels are affixed inside the memory module compartment. ENWW 19 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Index A AC adapter, identifying 18 antennae 9 applications key, Windows 3 audio-in (microphone) jack, identifying 11 audio-out (headphone) jack, identifying 11 B battery bay 17, 19 battery light, identifying 8 battery release latch, identifying 17 battery, identifying 18 bays battery 17, 19 hard drive 16 Bluetooth label 19 buttons DVD 6 media 6 next/fast forward 7, 13 play/pause 7, 13 power 11 previous/rewind 7, 13 stop 7, 13 TouchPad 2 TouchPad on/off 2 C cable, RJ-11 (modem) 18 Certificate of Authenticity label 19 compartments memory module 16 Mini Card 16 components additional hardware 18 bottom 16 display 5 front 11 left-side 15 rear 12 right-side 13 top 2 connector, power 15 cord, power 18 D Digital Media Slot light, identifying 15 Digital Media Slot, identifying 15 display release latch 5, 11 display switch, identifying 5 drive light, identifying 8 drives hard 16 DVD button, identifying 6 E esc key, identifying 3 expansion port, identifying 13 ExpressCard slot, identifying 15 external monitor port, identifying 14 F fingerprint reader 5 fn key, identifying 3 function keys, identifying 3 H hard drive bay, identifying 16 headphone (audio-out) jack 11 hotkeys, quick reference 4 I infrared lens, identifying 11 integrated camera light, identifying 5 internal display switch, identifying 5 J jacks audio-in (microphone) 11 audio-out (headphone) 11 RJ-11 (modem) 12 RJ-45 (network 13 S-Video-out 14 K keypad keys, identifying 3 keys esc 3 fn 3 function 3 keypad 3 Windows applications 3 Windows logo 3 L labels Bluetooth 19 Microsoft Certificate of Authenticity 19 modem approval 19 regulatory 19 service tag 19 wireless certification 19 WLAN 19 latch, battery release 17 latches display release 5, 11 lights battery 8 Digital Media Slot 15 drive 8 integrated camera 5 power 8 20 Index ENWW Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

TouchPad 2 wireless 11 M media activity buttons, identifying 7, 13 media button, identifying 6 memory module compartment, identifying 16 microphone (audio-in) jack 11 Microsoft Certificate of Authenticity label 19 Mini Card compartment, identifying 16 modem approval label 19 modem cable adapter, identifying 18 monitor port, external 14 N next/fast forward button, identifying 7, 13 O operating system Microsoft Certificate of Authenticity label 19 Product Key 19 P play/pause button, identifying 7, 13 ports expansion 13 external monitor 14 USB 13 power button, identifying 11 power connector, identifying 15 power cord, identifying 18 power light, identifying 8 Previous/rewind button, identifying 7, 13 Product Key 19 product name and number, computer 19 R reader, fingerprint 5 regulatory information modem approval label 19 regulatory label 19 wireless certification labels 19 release latch, battery 17 RJ-11 (modem) cable, identifying 18 RJ-11 (modem) jack, identifying 12 RJ-45 (network) jack, identifying 13 S S-Video-out jack, identifying 14 scrolling regions, TouchPad 2 security cable slot, identifying 12 serial number, computer 19 service tag 19 slots Digital Media 15 ExpressCard 15 memory module 16 security cable 12 stop button, identifying 7, 13 T TouchPad buttons 2 identifying 2 scrolling regions 2 TouchPad light, identifying 2 TouchPad on/off button 2 traveling with the computer modem approval label 19 wireless certification labels 19 U USB ports, identifying 13 V vents, identifying 12, 14, 16 W Windows applications key, identifying 3 Windows logo key, identifying 3 wireless antennae 9 wireless certification label 19 wireless light, identifying 11 WLAN device 19 WLAN label 19 WWAN device 10 ENWW Index 21 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Regulatory, Safety and Environmental Notices User Guide Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Copyright 2007 Hewlett-Packard Development Company, L.P. Windows and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Intel is a trademark or registered trademark of Intel Corporation or its subsidiaries in the United States and other countries. ENERGY STAR is a U.S. registered mark of the United States Environmental Protection Agency. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Eighth Edition: February 2008 First Edition: January 2007 Document Part Number: 437312-008 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Table of contents 1 Regulatory notices Federal Communications Commission notice ...................................................................................... 2 Modifications ........................................................................................................................ 2 Cables .................................................................................................................................. 2 Declaration of Conformity for products marked with the FCC logo (United States only) ..................................................................................................................................... 3 Products with wireless LAN devices or HP Broadband Wireless Modules .......................... 3 Brazilian notice ..................................................................................................................................... 4 Wireless LAN certification markings .................................................................................... 4 Canadian notices .................................................................................................................................. 4 Avis Canadien ...................................................................................................................................... 5 European Union notices ....................................................................................................................... 5 Products with 2.4-GHz wireless LAN devices ...................................................................... 6 France ................................................................................................................. 6 Italy ...................................................................................................................... 6 Products with 5-GHz wireless LAN devices ......................................................................... 7 Products with HP Broadband Wireless Modules ................................................................. 7 Ergonomics notice ............................................................................................................... 7 Germany ............................................................................................................. 7 Indian notice ......................................................................................................................................... 8 Japanese notices ................................................................................................................................. 8 Wireless LAN 802.11b devices ............................................................................................ 8 Wireless LAN 802.11g devices ............................................................................................ 8 Wireless LAN certification markings .................................................................................... 8 Wireless WAN certification markings ................................................................................... 9 Bluetooth devices ................................................................................................................ 9 Certification markings for Bluetooth devices ........................................................................ 9 Korean notice ....................................................................................................................................... 9 Singaporean wireless notice ................................................................................................................ 9 Taiwan notice ..................................................................................................................................... 10 Airline travel notice ............................................................................................................................. 10 Battery notices .................................................................................................................................... 10 ENERGY STAR compliance .............................................................................................................. 10 Laser compliance ............................................................................................................................... 11 Modem notices ................................................................................................................................... 11 Telecommunications device approvals .............................................................................. 11 U.S. modem statements .................................................................................................... 12 U.S. modem declarations .................................................................................................. 13 Canadian modem statements ............................................................................................ 20 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

iii Japanese modem statements ............................................................................................ 20 New Zealand modem statements ...................................................................................... 21 Voice support .................................................................................................... 21 Power cord notice ............................................................................................................................... 22 Japanese power cord notice .............................................................................................. 22 Macrovision Corporation notice .......................................................................................................... 22 2 Safety notices Heat-related safety warning notice ..................................................................................................... 23 Battery notices .................................................................................................................................... 23 Headset and earphone volume level notice ....................................................................................... 23 Power cord notices ............................................................................................................................. 24 Cleaning the keyboard ....................................................................................................................... 25 Travel notice ....................................................................................................................................... 25 Norway and Sweden: Cable grounding notice for products with a TV tuner ...................................... 25 3 Environmental notices Battery disposal .................................................................................................................................. 26 Electronic hardware and battery recycling ......................................................................................... 26 Disposal of waste equipment by users in private households in the European Union ....................... 26 Chinese material content declarations ............................................................................................... 27 Japanese material content declaration ............................................................................................... 29 United States mercury disposal .......................................................................................................... 29 Perchlorate material - special handling may apply ............................................................................. 29 Index ................................................................................................................................................................... 30 iv Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

1 Regulatory notices This guide provides country- and region-specific non-wireless and wireless regulatory notices and compliance information for the computer product. Some of these notices may not apply to your product. One or more integrated wireless devices may be installed. In some environments, the use of wireless devices may be restricted. Such restrictions may apply on-board airplanes, in hospitals, near explosives, in hazardous locations, and so on. If you are uncertain of the policy that applies to the use of this product, ask for authorization to use it before you turn it on. To identify a hardware device, such as a wireless LAN (WLAN) network device, installed on the computer, open the Device Manager utility. In Windows Vista, follow these steps:

1. 2. Select Start > Computer > System properties. In the left pane, click Device Manager. In Windows XP Professional and Windows XP Home, follow these steps:

1. 2. Select Start > My Computer. If the left pane, select View System Information > Hardware tab > Device Manager. Regulatory markings for your country may be located on the bottom of the product, under the battery, under a user-removable door (or some other user-accessible location), or on the wireless or modem module. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

1 Federal Communications Commission notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio or television technician for help. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by HP may void the user's authority to operate the equipment. Cables To maintain compliance with FCC Rules and Regulations, connections to this device must be made with shielded cables having metallic RFI/EMI connector hoods. 2 Chapter 1 Regulatory notices Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Declaration of Conformity for products marked with the FCC logo

(United States only) This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions:

1. 2. This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. If you have questions about the product that are not related to this declaration, write to Hewlett-Packard Company P. O. Box 692000, Mail Stop 530113 Houston, TX 77269-2000 For questions regarding this FCC declaration, write to Hewlett-Packard Company P. O. Box 692000, Mail Stop 510101 Houston, TX 77269-2000 or call HP at 281-514-3333 To identify your product, refer to the part, series, or model number located on the product. Products with wireless LAN devices or HP Broadband Wireless Modules This device must not be co-located or operating in conjunction with any other antenna or transmitter. WARNING! Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation of tablet PCs and notebooks. During normal operation of tablet PCs: To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennae should not be less than 2.5 cm (1 inch). To identify the location of the wireless antennae, refer to the Tablet PC Tour user guide included with the computer. During normal operation of notebooks: To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennae should not be less than 20 cm (8 inches), including when the computer display is closed. To identify the location of the wireless antennae, refer to the Notebook Tour user guide included with the computer. CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15- to 5.25-GHz frequency range. The FCC requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-

channel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-

GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Federal Communications Commission notice 3 Brazilian notice Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Este equipamento atende aos limites de Taxa de Absoro Especfica referente exposio a campos eltricos, magnticos e eletromagnticos de radiofreqncias adotados pela ANATEL. Unless the computer has an Intel PRO/Wireless 2100 Wireless LAN radio or an Intel PRO/Wireless 2200 Wireless LAN radio, the Brazilian certification mark is located on the bottom of the computer. Wireless LAN certification markings The Intel PRO/Wireless 2100 Wireless LAN has the certification mark below:

The Intel PRO/Wireless 2200 Wireless LAN has the certification mark below:

Canadian notices This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Wireless operation is subject to 2 conditions. The first is that the wireless device may not cause interference. The second is that the wireless device must accept any interference, including interference that may cause undesired operation of the device. CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25-

to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. The antennae for this device are not replaceable. Any attempt at user access will damage your computer. 4 Chapter 1 Regulatory notices Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

For radio devices in the 5250- to 5350-MHz and 5470- to 5725-MHz bands, the maximum gain as specified by the Canadian e.i.r.p. limit is noted below:

Broadcom 802.11a/b/g WLAN = 5.6 dBi Broadcom 4321AG 802.11a/b/g/draft-n Wi-Fi Adapter = 5.6 dBi Intel PRO/Wireless 3945ABG = 6 dBi Intel Wireless WiFi Link 4965AG = 6 dBi Intel Wireless WiFi Link 4965AGN = 6 dBi For radio devices in the 5725- to 5825-MHz band, the maximum gain permitted, as specified by the Canadian e.i.r.p. limits for point-to-point and non-point-to-point operation, is noted below:

Broadcom 802.11a/b/g WLAN = 5.8 dBi Broadcom 4321AG 802.11a/b/g/draft-n Wi-Fi Adapter = 5.8 dBi Intel PRO/Wireless 3945ABG = 6 dBi Intel Wireless WiFi Link 4965AG = 6 dBi Intel Wireless WiFi Link 4965AGN = 6 dBi Avis Canadien Cet appareil numrique de la classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. European Union notices Products bearing the CE marking comply with the following EU Directives:

Low Voltage Directive 2006/95/EC EMC Directive 2004/108/EC CE compliance of this product is valid only if powered with the correct CE-marked AC adapter provided by HP. If this product has telecommunications functionality, it also complies with the essential requirements of the following EU Directive:

R&TTE Directive 1999/5/EC Compliance with these directives implies conformity to harmonized European standards (European Norms) that are listed in the EU Declaration of Conformity issued by HP for this product or product family. This compliance is indicated by one of the following conformity markings placed on the product. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Avis Canadien 5 The following CE marking is valid for non-telecommunications products and for EU harmonized telecommunications products, such as Bluetooth. Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany The following CE marking is valid for EU non-harmonized telecommunications products.

*If applicable, a notified body number is used. Refer to the regulatory label provided on this product. The telecommunications functionality of this product may be used in the following EU and EFTA countries:

Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, and United Kingdom. The official EU CE declaration of conformity for this device may be found at www.hp.com/go/

certificates. Products with 2.4-GHz wireless LAN devices France L'utilisation de cet equipement (2.4GHz wireless LAN) est soumise certaines restrictions : cet equipement peut tre utilis l'interieur d'un batiment en utilisant toutes les frequences de 2400 a 2483.5MHz (Chaine 113). Pour une utilisation en environnement exterieur, vous devez utiliser les frequences comprises entre 2454 a 2483.5-MHz (Chaine 1013). Pour les dernires restrictions, voir http://www.art-telecom.fr. For 2.4-GHz wireless LAN operation of this product, certain restrictions apply. This equipment may use the entire 2400-MHz to 2483.5-MHz frequency band (channels 1 through 13) for indoor applications. For outdoor use, the 2454-MHz to 2483.5-MHz frequency band (channels 10 through 13) may not be used. For the latest requirements, see http://www.art-telecom.fr. Italy E'necessaria una concessione ministeriale anche per l'uso del prodotto. Verifici per favore con il proprio distributore o direttamente presso la Direzione Generale Pianificazione e Gestione Frequenze. License required for use. Verify with your dealer or directly with the General Direction for Frequency Planning and Management (Direzione Generale Pianificazione e Gestione Frequenze). 6 Chapter 1 Regulatory notices Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Products with 5-GHz wireless LAN devices Frequency availability for 802.11a or 802.11h wireless LAN is not currently harmonized throughout the European Union. For compliance requirements, users should verify compliance with their supplier, local HP office, or telecommunications authority. Products with HP Broadband Wireless Modules THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO FREQUENCY RADIATION. The HP Broadband Wireless Module in your notebook is a radio transmitter and receiver. The device is designed not to exceed the limits for exposure to radio frequency (RF) recommended by international guidelines (ICNIRP). These limits are part of comprehensive guidelines that establish permitted levels of RF radiation for the general population. The guidelines were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The device also meets the European R&TTE directives, including the protection of the health and the safety of the user and any other person. The exposure standard for mobile devices employs a unit of measurement known as the Specific Absorption Rate (SAR).* The SAR was obtained by testing the device at standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The SAR information for your computer, including the recommended minimum distance from the body, is available on the HP Web site at http://www.hp.com/broadbandwireless. The actual SAR of the device while operating can be well below the maximum value, because the device operates at multiple power levels and uses only the power required to reach the network. When installed in the notebook computer, this device meets RF exposure guidelines when the antennae are positioned at a minimum distance from the body. In order to transmit data or messages, this device requires a quality connection to the network. In some cases, transmission of data or messages may be delayed until such a connection becomes available. Be sure that the recommended distance is observed until the transmission is complete.

*The non-FCC, international guidelines state that the SAR limit for mobile devices used by the public is 2.0 watts/kilogram (W/kg) averaged over 10 grams of body tissue. The guidelines incorporate a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. SAR values may vary depending on national reporting requirements and the network band. Ergonomics notice Germany Mobile computers bearing the "GS" approval mark meet the ergonomic requirements and are suitable only for short time use of VDU tasks. When a mobile computer is used for display work tasks where the VDU Directive 90/270/EEC is applicable, an adequate external keyboard is required. Depending on the application and task, an adequate external monitor may also be necessary to attain working conditions comparable to a workstation setup. Mobile Computer, welche das "GS" Zeichen tragen, entsprechen den ergonomischen Anforderungen und sind nur fr kurzzeitige Benutzung von Bildschirmarbeitsaufgaben geeignet. Wird ein mobiler Computer fr Bildschirmarbeitsaufgaben verwendet, wo die Richtlinie 90/270/EEG

(Bildschirmarbeitsrichtlinie) anzuwenden ist, wird eine geeignete externe Tastatur notwendig. Abhngig von der Anwendung und der Aufgabe kann ein geeigneter externer Monitor erforderlich sein, um vergleichbare Arbeitsbedingungen zu einem stationren Arbeitsplatz zu erreichen. European Union notices 7 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Indian notice The India Telegraph Act of 1885 requires that an IEEE 802.11a wireless LAN end user obtain a license. To obtain this license, please contact The Wireless Planning & Coordination Wing, Ministry of Communications, Sanchar Ghavan New Delhi. Japanese notices Wireless LAN 802.11b devices Wireless LAN 802.11g devices Wireless LAN certification markings This product contains certified radio equipment 8 Chapter 1 Regulatory notices Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Wireless WAN certification markings The HP hs2300 HSDPA Broadband Wireless Module has the certification mark below:

Bluetooth devices Certification markings for Bluetooth devices This product contains certified radio equipment Korean notice Singaporean wireless notice Turn off any WWAN devices while you are onboard aircraft. The use of these devices onboard aircraft is illegal, may be dangerous to the operation of the aircraft, and may disrupt the cellular network. Failure to observe this instruction may lead to suspension or denial of cellular services to the offender, or legal action, or both. Users are reminded to restrict the use of radio equipment in fuel depots, chemical plants, and where blasting operations are in progress. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, no part of the human body should be allowed to come too close to the antenna during operation of the equipment. This device has been designed to comply with applicable requirements for exposure to radio waves, based on scientific guidelines that include margins intended to assure the safety of all people, regardless of health and age. These radio wave exposure guidelines employ a unit of measurement known as the specific absorption rate (SAR). Tests for SAR are conducted using standardized methods, with the phone transmitting at its highest certified power level in all used frequency bands. The SAR data information is based on CENELEC's standards EN50360 and EN50361, which use the limit of 2 watts per kilogram, averaged over 10 grams of tissue. Korean notice 9 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Taiwan notice Airline travel notice Use of electronic equipment onboard commercial aircraft is at the discretion of the airline. Battery notices CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. For information about removing a battery, refer to the user guide included with the product. ENERGY STAR compliance HP computers marked with the ENERGY STAR logo are compliant with the applicable U.S. Environmental Protection Agency (EPA) ENERGY STAR specifications for computers. The EPA ENERGY STAR logo does not imply endorsement by the EPA. As an ENERGY STAR Partner, Hewlett-

Packard Company has determined that the products marked with the ENERGY STAR logo are ENERGY STAR qualified as per the applicable ENERGY STAR guidelines for energy efficiency. The following logo will appear on all ENERGY STAR qualified computers:

The ENERGY STAR program for computers was created by the EPA to promote energy efficiency and reduce air pollution through more energy-efficient equipment in homes, offices, and factories. One way that products achieve this goal is by using the Microsoft Windows power management feature to reduce power consumption when the product is not in use. The power management feature allows the computer to initiate a low-power or Sleep mode after a period of user inactivity. When used with an external ENERGY STAR qualified monitor, this feature also supports similar power management features of the monitor. To take advantage of these potential energy savings, the power management feature has been preset to behave in the following ways when the system is operating on AC power:

Turn off the display after 15 minutes Initiate Sleep after 30 minutes The computer exits Sleep when the power/Sleep button is pressed. When the Wake On LAN (WOL) feature is enabled, the computer can also exit Sleep in response to a network signal. 10 Chapter 1 Regulatory notices Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Additional information on the potential energy and financial savings of the power management feature can be found on the EPA ENERGY STAR Power Management Web site at http://www.energystar.gov/

powermanagement. Additional information on the ENERGY STAR program and its environmental benefits are available on the EPA ENERGY STAR Web site at http://www.energystar.gov. Laser compliance This product may be provided with a device containing a laser that is classified as a Class 1 Laser Product in accordance with US FDA regulations and the IEC 60825-1. The product does not emit hazardous laser radiation. Each laser product complies with 21 CFR 1040.10 and 1040.11, except for deviations pursuant to Laser Notice No. 50, dated May 27, 2001; and with IEC 60825-1:1993/A2:2001. WARNING! Use of controls or adjustments, or performance of procedures other than those specified in the laser product installation guide, may result in hazardous radiation exposure. To reduce the risk of exposure to hazardous radiation:

Do not try to open the module enclosure. There are no user-serviceable components inside. Do not operate controls, make adjustments, or perform procedures to the laser device other than those specified in the laser product installation guide. Allow only authorized service providers to repair the unit. Modem notices WARNING! To reduce the risk of fire, electric shock, and injury to persons when using this device, always follow basic safety precautions, including the following:

Do not use this product near waterfor example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Avoid using this product during an electrical storm. There is a remote risk of electric shock from lightning. Do not use this product to report a gas leak while in the vicinity of the leak. Always disconnect the modem cable before opening the equipment enclosure or touching an uninsulated modem cable, jack, or internal component. If this product was not provided with a telephone line cord, use only No. 26 AWG or larger telecommunication line cord. Do not plug a modem or telephone cable into the RJ-45 (network) jack. SAVE THESE INSTRUCTIONS Telecommunications device approvals The telecommunications device in the computer is approved for connection to the telephone network in the countries and regions whose approval markings are indicated on the product label located on the bottom of the computer or on the modem. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Laser compliance 11 Refer to the user guide included with the product to ensure that the product is configured for the country or region in which the product is located. Selecting a country or region other than the one in which it is located may cause the modem to be configured in a way that violates the telecommunication regulations/

laws of that country or region. In addition, the modem may not function properly if the correct country or region selection is not made. If, when you select a country or region, a message appears that states that the country or region is not supported, this means that the modem has not been approved for use in this country or region and thus should not be used. U.S. modem statements This equipment complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA. On the bottom of the computer or on the modem is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. Provide this information to the telephone company if you are requested to do so. Applicable certification jack USOC = RJ11C. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all locations, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label. If this HP equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But, if advance notice isn't practical, the telephone company will notify you as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes to its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted telephone service. If trouble is experienced with this equipment, call technical support. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. You should perform repairs only to the equipment specifically discussed in the Troubleshooting section of the user guide, if one is provided. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information. If your home has specially wired alarm equipment connected to the telephone line, ensure that the installation of this HP equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including a fax machine, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page, or on the first page of the transmission, the date and time it is sent and an identification of the business, other entity, or other individual sending the message, and the telephone number of the sending machine or such business, 12 Chapter 1 Regulatory notices Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges). In order to program this information into your fax machine, you should complete the steps outlined in the faxing software instructions. U.S. modem declarations Refer to the following modem vendor declarations for the modem device installed in your computer:

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Modem notices 13 14 Chapter 1 Regulatory notices Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Modem notices 15 16 Chapter 1 Regulatory notices Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Modem notices 17 18 Chapter 1 Regulatory notices Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Modem notices 19 Canadian modem statements This equipment meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number, REN, is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices, subject only to the requirement that the sum of the RENs of all devices does not exceed 5. The REN for this terminal equipment is 1.0. Japanese modem statements If the computer does not have the Japanese certification mark on the bottom of the computer, refer to the appropriate certification marking below. The Japanese certification mark for the Agere Systems AC'97 modem is below:

The Japanese certification mark for the HDAUDIO Soft Data Fax Modem with SmartCP is below:

The Japanese certification mark for the Agere Systems HDA modem is below:

The Japanese certification mark for the HDAUDIO Soft Data Fax Modem with SmartCP is below:

The Japanese certification mark for the V.92 56K Data/Fax Modem is below:

20 Chapter 1 Regulatory notices Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

The Japanese certification mark for the V.92 56K Data/Fax Modem is below:

The Japanese certification mark for the V.92 56K Data/Fax Modem is below:

New Zealand modem statements The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom's network services. This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for which it is designed. Telecom will accept no responsibility should difficulties arise in such circumstances. If this device is equipped with pulse dialing, note that there is no guarantee that Telecom lines will always continue to support pulse dialing. Use of pulse dialing, when this equipment is connected to the same line as other equipment, may give rise to bell tinkle or noise and may also cause a false answer condition. Should such problems occur, the user should not contact the Telecom Faults Service. Some parameters required for compliance with Telecom's Telepermit requirements are dependent on the equipment (PC) associated with this device. The associated equipment shall be set to operate within the following limits for compliance with Telecom's Specifications:

a. b. There shall be no more than 10 call attempts to the same number within any 30-minute period for any single manual call initiation. The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next attempt. c. Where automatic calls are made to different numbers, the equipment shall be set to go on-hook for a period of not less than 5 seconds between the end of one attempt and the beginning of the next attempt. d. The equipment shall be set to ensure that calls are answered between 3 and 30 seconds of receipt of ringing (So set between 2 and 10). Voice support All persons using this device for recording telephone conversations shall comply with New Zealand law. This requires that at least one party to the conversation is aware that it is being recorded. In addition, Modem notices 21 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

the Principles enumerated in the Privacy Act 1993 shall be complied with in respect to the nature of the personal information collected, the purpose for its collection, how it is to be used, and what is disclosed to any other party. This equipment shall not be set to make automatic calls to the Telecom 111' Emergency Service. Power cord notice If you were not provided with a power cord for the computer or for an external power accessory intended for use with the computer, you should purchase a power cord that is approved for use in your country or region. The power cord must be rated for the product and for the voltage and current marked on the product's electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and current rating marked on the product. In addition, the diameter of the wire must be a minimum of 0.75 mm/18AWG, and the length of the cord must be between 1.5 m (5 ft) and 2 m (6 ft). If you have questions about the type of power cord to use, contact your authorized service provider. A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product. Japanese power cord notice Macrovision Corporation notice This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. 22 Chapter 1 Regulatory notices Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

2 Safety notices Heat-related safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the AC adapter comply with the user-accessible surface temperature limits defined by the International Standard for Safety of Information Technology Equipment (IEC 60950). Battery notices WARNING! To reduce the risk of fire or burns, do not disassemble, crush, or puncture a battery; short the external contacts on a battery; or dispose of a battery in fire or water. Do not expose a battery to temperatures above 60C (140F). WARNING! Keep the battery away from children. WARNING! To reduce potential safety issues, only the battery provided with the computer, a replacement battery provided by HP, or a compatible battery purchased as an accessory from HP should be used with the computer. Headset and earphone volume level notice WARNING! Listening to music at high volume levels and for extended durations can damage ones hearing. To reduce the risk of hearing damage, lower the volume to a safe, comfortable level and reduce the amount of time listening at high levels. For your own safety, before using headsets or earphones, always reset the volume. Some headphones are louder than other headphones, even if the volume control setting is the same. Changing the default audio or equalizer settings might lead to higher volume and should only be done with caution. For your own safety, headsets or earphones used with this product should comply with the headphone limits in EN 50332-2. If the computer includes a headset or earphones, this combination is in compliance to EN 50332-1. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Heat-related safety warning notice 23 Power cord notices WARNING! To reduce the risk of electric shock or damage to the equipment:

Plug the power cord into an AC outlet that is easily accessible at all times. Disconnect power from the computer by unplugging the power cord from the AC outlet (not by unplugging the power cord from the computer). If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-

pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an important safety feature. WARNING! To reduce potential safety issues, only the AC adapter provided with the computer, a replacement AC adapter provided by HP, or an AC adapter purchased as an accessory from HP should be used with the computer. 24 Chapter 2 Safety notices Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Cleaning the keyboard WARNING! To reduce the risk of electric shock or damage to internal components, do not use a vacuum cleaner attachment to clean the keyboard. A vacuum cleaner can deposit household debris on the keyboard surface. Clean the keyboard regularly to prevent keys from sticking and to remove dust, lint, and particles that can become trapped beneath the keys. A can of compressed air with a straw extension can be used to blow air around and under the keys to loosen and remove debris. Travel notice WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not attempt to power the computer with a voltage converter kit sold for appliances. Norway and Sweden: Cable grounding notice for products with a TV tuner CAUTION: To reduce potential safety issues, use a galvanic isolator when connecting to a cable distribution system. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Cleaning the keyboard 25 3 Environmental notices This chapter provides country- and region-specific environmental notices and compliance information. Some of these notices may not apply to your product. Battery disposal WARNING! When a battery has reached the end of its useful life, do not dispose of the battery in general household waste. Follow the local laws and regulations in your area for computer battery disposal. Electronic hardware and battery recycling HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, see the HP Web site at http://www.hp.com/recycle. Disposal of waste equipment by users in private households in the European Union This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service, or the shop where you purchased the product. 26 Chapter 3 Environmental notices Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Chinese material content declarations The Table of Toxic and Hazardous Substances/Elements and their Content As required by China's Management Methods for Controlling Pollution by Electronic Information Products Part Name Battery Cables Camera Chassis/Other Flash memory card reader Floppy disk drive Hard disk drive Headphones I/O PCAs Keyboard Liquid crystal display

(LCD) panel Media (CD/DVD/floppy) Memory Motherboard, processor, heat sinks Mouse Optical disk drive Optional docking device Power adapter Power supply Remote control Smart card/Java card reader Speakers, external TV tuner USB flash memory drive Toxic and Hazardous Substances and Elements Lead

(Pb) Mercury

(Hg) Cadmium

(Cd) Hexavalent Chromium

(Cr(VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE) X X X X X X X X X X X O X X X X X X X X X X X X O O O O O O O O O O X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Chinese material content declarations 27 USB flash memory driveUSB hub Web camera Wireless receiver Wireless cards X X X X O O O O O O O O O O O O O O O O O O O O O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T11363-2006. X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T11363-2006. All parts named in this table with an X are in compliance with the European Union's RoHS Legislation "Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment."

NOTE: The referenced Environmental Protection Use Period Marking was determined according to normal operating use conditions of the product such as temperature and humidity. 28 Chapter 3 Environmental notices Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Japanese material content declaration A Japanese regulatory requirement, defined by specification JIS C 0950, 2005, mandates that manufacturers provide material content declarations for certain categories of electronic products offered for sale after July 1, 2006. To view the JIS C 0950 material declaration for this product, see the HP Web site at http://www.hp.com/go/jisc0950. United States mercury disposal This computer contains mercury in the fluorescent lamp of the computer display, which may require special handling when the computer has reached the end of its useful life. Because of environmental considerations, local authorities may regulate the disposal of the mercury. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance (EIA) at http://www.eiae.org. Perchlorate material - special handling may apply See http://www.dtsc.ca.gov/hazardouswaste/perchlorate. This products real-time clock battery or coin cell battery may contain perchlorate and may require special handling when recycled or disposed of in California. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Japanese material content declaration 29 Index Symbols/Numerics 2.4-GHz wireless LAN devices 6 modifications 2 notice 2 France, 2.4-GHz wireless LAN 5-GHz wireless LAN devices 7 devices 6 New Zealand 21 U.S. 12 modifications, Federal Communications Commission 2 A airline travel notice 10 G GS Notice 7 B battery disposal notice 26 battery notice 10, 23 Brazilian notice 4 H hardware device, identifying 1 headset and earphone volume level notice 23 C cable grounding notice 25 Canadian modem statement 20 Canadian notices 4 Chinese Material Content Declarations 27 D Declaration of Conformity 3 disposal notices battery 26 equipment 26 mercury 29 E electronic hardware and battery recycling 26 ENERGY STAR compliance 10 environmental notices 26 equipment disposal notice 26 ergonomics notice 7 European Union notices 5 F Federal Communications Commission cables 2 30 Index I Indian notice 8 Italy, 2.4-GHz wireless LAN devices 6 J Japanese material content declaration 29 Japanese modem statement 20 Japanese notice 8 Japanese power cord notice 22 K keyboard notice 25 Korean notice 9 L laser safety notice 11 M Macrovision Corporation notice 22 mercury disposal notice 29 modem notices 11 modem statements Canadian 20 Japanese 20 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

N New Zealand modem statement 21 notices airline travel 10 battery 10, 23, 26 Brazilian 4 Canadian 4 environmental 26 equipment disposal 26 ergonomics 7 European Union 5 Federal Communications Commission 2 headset and earphone volume level 23 Indian 8 Japanese 8 Japanese power cord 22 keyboard 25 Korean 9 laser safety 11 Macrovision Corporation 22 mercury disposal 29 modem 11 perchlorate material 29 power cords 22, 24 Singaporean 9 Taiwan 10 travel 25 P power cord notice 22, 24 S Singaporean wireless notice 9 T Taiwan notice 10 travel notice 25 TV tuner, cable grounding notice 25 U U.S. modem statement 12 V voice support 21 W wireless LAN devices 3 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Index 31 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

FCC Statements to be included in the Users Guide for Dell Siberia USA-Federal Communications Commission (FCC) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna

-Increase the distance between the equipment and the receiver.

-Connect the equipment to outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Caution: Exposure to Radio Frequency Radiation. To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennae should not be less than 20 cm (8 inches). This device must not be co-located or operating in conjunction with any other antenna or transmitter, unless authorized by FCC.

Boadcom 802.11ag WLAN PCI-E Mini Card User's Guide The Solution BCM94311MCAG enables access to wireless local area networks (WLANs), enables the sharing of a local printer and files with others in the network, enables Internet connection sharing, and enables roaming about the officewire-free. This wireless LAN solution is designed for both the home user and businessesand it is scalable so that users can be added and new network features can be enabled as networking needs grow. Configuring a Network Profile in Infrastructure Mode (Windows XP Environment) Before you can connect to a wireless network, you must configure a network profile for that network on your notebook computer. If you purchased your notebook computer with the Boadcom WLAN Card already installed and set up at the factory, follow the network profile configuration instructions provided below. If this is not the case, first verify that the Boadcom WLAN Card has been properly installed in your computer according to the installation instructions. Then proceed with the following instructions for configuring your network profiles. To begin configuring a network profile, open Wireless Network Connection Properties. 1. Click Start, click Control Panel, and then click Network Connections. 2. Click Wireless Network Connection. 3. Under Network Tasks, click Change settings of this connection. NOTEFor more information on how to configure a network profile and IEEE 802.1x authentication, click Learn about setting up wireless network configuration. You can configure a network profile for networks that are listed under Available networks as well as those that are not listed. When you have completed configuring a network profile, the network name and icon appear at the top of the list under Preferred networks. Your computer automatically connects to the network at the top of the list. Follow the applicable instruction set below, based on whether or not the network is listed and whether or not the network requires network key information (check with your network administrator or access point (AP) installer to see if network key information is required). NOTEBoth the network name and the network key information are case-sensitive. m Configuring a Profile for a Listed Network That Does Not Require Network Key Information m Configuring a Profile for a Listed Network That Requires Network Key Information m Configuring a Profile for a Network That Is Not Listed and Does Not Require Network Key Information m Configuring a Profile for a Network That Is Not Listed and Requires Network Key Information Configuring a Profile for a Listed Network That Does Not Require Network Key Information (Windows XP Environment) 1. Click the network name under Available networks and click Configure. 2. Click OK. The network name and icon appear at the top of the list under Preferred networks. 3. Click OK to activate the network connection. To verify that the network connection has been made, reopen Wireless Network Connection Properties. The computer is connected to the selected network when a blue bubble appears on top of the icon page to verify that you are connected to the Internet. for that network. If the bubble does not appear, click Refresh. If it still does not appear, try to access a Web Configuring a Profile for a Listed Network That Requires Network Key Information (Windows XP Environment) Wired Equivalent Privacy (WEP) Security 1. Click the network name under Available networks and then click Configure. 2. Clear the The key is provided for me automatically check box. 3. From the Network Authentication list, select Open. 4. From the Data encryption list, select WEP. 5. Type the network key in the Network key box and again in the Confirm network key box. 6. Click OK. The network name and icon appear at the top of the list under Preferred networks. 7. Click OK to activate the network connection. To verify that the network connection has been made, reopen Wireless Network Connection Properties. The computer is connected to the selected network when a blue bubble appears on top of the icon Refresh. If it still does not appear, try to access a Web page to verify that you are connected to the Internet. for that network. If the bubble does not appear, click Wi-Fi Protected Access (WPA) Security Encryption 1. Click the network name under Available networks and then click Configure. 2. Clear the The key is provided for me automatically check box. 3. From the Network Authentication list, select the network authentication type specified by the network administrator/AP installer. 4. From the Data encryption list, select the data encryption type specified by the network administrator/AP installer. 5. If required by the network administrator/AP installer, type the network key in the Network key box and again in the Confirm network key box. NOTEA network key is not required for WPA type network authentication. 6. Click OK. The network name and icon appear at the top of the list under Preferred networks. 7. Click OK to activate the network connection. To verify that the network connection has been made, reopen Wireless Network Connection Properties. The computer is connected to the selected network when a blue bubble appears on top of the icon Refresh. If it still does not appear, try to access a Web page to verify that you are connected to the Internet. for that network. If the bubble does not appear, click AuthenticationConfiguring the Network for Light Extensible Authentication Protocol (LEAP) Support NOTEConfigure the network profile before you begin. 1. Click Start, click Control Panel, and then click Wireless Configuration Utility 2. Click the LEAP tab. 3. Select the Enable LEAP check box. 4. Click the network name, and then click Properties. 5. Type the network name, LEAP user name, and LEAP password in the respective boxes and click OK. Configuring a Profile for a Network That Is Not Listed and Does Not Require Network Key Information (Windows XP Environment) 1. Under Preferred networks, click Add. 2. Type the network name in the Network name (SSID) box and Click OK. 3. Click OK to activate the network connection. To verify that the network connection has been made, reopen Wireless Network Connection Properties. The computer is connected to the added network when a blue bubble appears on top of the icon Refresh. If it still does not appear, try to access a Web page to verify that you are connected to the Internet. for that network. If the bubble does not appear, click Using Wireless Utility:

Windows XP Environment 1. Open the TrueMobile Wireless Utility. 2. Click the Link Status tab. The quality of the connection (signal strength and noise) of the particular network you are connected to is indicated by the horizontal bars and the decibel level values that are displayed at the bottom of the Link Status tab. The connection quality is also indicated by the appearance of the utility icon cursor over the icon. in the desk top system tray. The description of the signal strength appears when you hover the The table below shows the quality level and suggested action for improving the signal quality for each icon image that may be displayed. If the signal strength indications are anything other than very good or excellent, you should take the appropriate suggested action. Four vertical green bars indicate that the signal strength is very good or excellent. Three vertical green bars indicate that the signal is good. Three vertical yellow bars indicate that the signal strength is low. Suggested action: Move closer to the access point. Two red vertical red bars indicates that the signal strength is very low. Suggested action: Move closer to the access point. Uncolored vertical bars indicate that there is no signal being received. Probable causes:

l The computer is trying to establish an initial connection but has not yet succeeded. l You may have moved out of range of the access point. Suggested action:

l Wait l Move closer to the access point. Uncolored vertical bars with a superimposed red letter x indicate that there is no radio connection. Probable cause: The radio is disabled. Suggested action: Enable the radio. To enable the radio, right-click the utility icon Enable Radio. in the system tray and click Disabling the Radio To disable the radio on your Broadcom WLAN Card, right-click the utility icon in the system tray and click Disable Radio. To enable the radio, right-click the icon radio can be enabled/disabled by pressing Fn + F2. and click Enable Radio. On newer Dell TrueMobile enabled notebooks, the Diagnostics You can run a number of diagnostics on your Broadcom WLAN Card to verify its operational and functional status. NOTEThe network connection is lost when you run the diagnostics. When the test run is over, however, your network connection is automatically reestablished. Windows XP Environment 1. Open the Wireless Configuration Utility. 2. Click the Diagnostics tab. 3. To see a description of the test, click each test and look in the Recommendations area. 4. All tests are selected by default. To run an individual test or some but not all of the tests, clear the check box for those tests that you do not want to run. 5. Click Run Tests. 6. If your Braodcom WLAN Card fails any of the diagnostics tests, see Troubleshooting. Regulatory Information:

Information for the User Regulatory Information Information for the User Wireless Interoperability The Broadcom WLAN Card products are designed to be interoperable with any wireless LAN product that is based on direct sequence spread spectrum (DSSS) and orthogonal frequency division multiplexing (OFDM) radio technology and to comply with the following standards:

l IEEE Std 802.11b-1999. Standard on 2.4 GHz Wireless LAN l IEEE Std 802.11g. Standard on 2.4 GHz Wireless LAN l IEEE Std 802.11a-1999. Standard on 5 GHz Wireless LAN The Broadcom WLAN Cards and Your Health The Broadcom WLAN Cards, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by these devices, however, is less than the electromagnetic energy emitted by other wireless devices such as mobile phones. The Broadcom WLAN Card devices operate within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of a Broadcom WLAN Card wireless device may be restricted by the proprietor of the building or responsible representatives of the applicable organization. Examples of such situations include the following:

l Using the Broadcom WLAN Card equipment onboard airplanes, or l Using the Broadcom WLAN Card equipment in any other environment where the risk of interference with other devices or services is perceived or identified as being harmful. If uncertain of the policy that applies to the use of wireless devices in a specific organization or environment (an airport, for example), ask for authorization to use the Broadcom WLAN Card device before turning it on. Regulatory Statements for BCM94311MCAG Regulatory Information USAFederal Communications Commission (FCC) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna

-Increase the distance between the equipment and the receiver.

-Connect the equipment to outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. CAUTION This device is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range. FCC requires this product to be used indoors for frequency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device. CAUTION: Exposure to Radio Frequency Radiation. To comply with FCC RF exposure compliance requirements during normal operating conditions

(lap and tablet positions), a separation distance of at least 0.5cm must be maintained between the antenna of this device and all persons. This device must not be co-located or operating in conjunctionwith any other antenna or transmitter. CanadaIndustry Canada (IC) This device complies with RSS 210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. L utilisation de ce dispositif est autorise seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l utilisateur du dispositif doit tre prt accepter tout brouillage radiolectrique reu, mme si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. The term "IC" before the equipment certification number only signifies that the Industry Canada technical specifications were met. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication. To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Pour empecher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit etre utilize a l'interieur et devrait etre place loin des fenetres afin de Fournier un ecram de blindage maximal. Si le matriel (ou son antenne d'emission) est installe a l'exterieur, il doit faire l'objet d'une licence. CAUTION This device is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range. Industry Canada requires this product to be used indoors for frequency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device. Caution: Exposure to Radio Frequency Radiation. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canadas website www.hc-sc.gc.ca/rpb. EuropeEU Declaration of Conformity and Restrictions Hereby, Broadcom Corp, declares that this equipment complies with the essential requirements and other relevant provisions of Directive 1999/5/EC. This equipment is marked with the community. 0984 symbol and can be used throughout the European This indicates compliance with the R&TTE Directive 1999/5/EC and meets the relevant parts of following technical specifications:

EN 300 328 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission Systems; Data transmission equipment operating in the 2,4GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE directive. EN 301 893 - Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive EN 301 489-17 - Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 17 Specific Conditions for Wideband Data and HIPERLAN Equipment. EN 60950 - Safety of Information Technology Equipment. EN 50385 Product standard to demonstrate the compliances of radio base stations and fixed terminal stations for wireless telecommunication systems with the basic restrictions or the reference levels related to human exposure to radio frequency electromagnetic fields. Marking by the symbol indicates that usage restrictions apply. France - 2.4GHz for Metropolitan France :

In all Metropolitan dpartements, wireless LAN frequencies can be used under the following conditions, either for public or private use:

Indoor use: maximum power (EIRP*) of 100 mW for the entire 2400-2483.5 MHz frequency band Outdoor use: maximum power (EIRP*) of 100 mW for the 2400-2454 MHz band and with maximum power

(EIRP*) of 10 mW for the 2454-2483 MHz band 802.11a Restrictions:

- This product is for indoor use only when using channels 36, 40, 44, 48, 52, 56, 60, or 64 (51505350 MHz).

- DFS and TPC must remain enabled to ensure product compliance with EC regulations.

- To ensure compliance with local regulations, be sure to select the country in which the access point in installed.

- This product can be used as shown in the table below:

5 GHz wireless LAN IEEE 802.11a Indoor Use Only A, AND, B, CH, D, CY, CZ, DK, ES, EST, F, FIN, FL, FR, GB, GR, H, I, IRL, IS, L, LT, M, MC, N, NL, P, PL, RSM, S, SK, SLO, V Taiwan DGT warning statement QG g{XC\vgWqADg\iAqB oWvB[j\v]pS\C Q| C\vgWqovTwzZXkqHFgo{

zZ{HAYALzZo~Ce kqHAqHWw@~LuqHCu~Bq gq]zZC Translation:

Article 12 Without permission granted, the frequency change, transmitting power enhance or alter of original design characteristic as well as function by company, enterprise, or user for approved Low-power radio frequency devices is not allowed. Article 14 Low-power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, shall cease operating immediately until no interference is achieved. Above mentioned Legal Communications is defined as radio communications operation follows Telecommunications Act. Low-power radio-frequency devices must susceptible with the interference from legal communications, ISM radio wave radiated devices. Radio devices using 5.25-5.35GHz bands are restricted to indoor use only. Appendix:

{X (ID):

tgWA XXXyyyLPDzzzz-x

,, XXXyyyLPDzzz-x .