MODULE LIGHT SPEAKER Users Manual 1. Installation 2. Function The MODULE LIGHT SPEAKER: 1.1 Chroma Speaker (120V/60Hz) plays songs through radio frequencies and Bluetooth modules. Turn on the Bluetooth feature on your phone, and you'll instantly find the ChromaComfort-Sensonic Speaker Bluetooth device and click to connect. Open the music player software on the phone and play the music through the Bluetooth speaker. FunctionDescription
indicator light ThePCBAinside indicator light A. Indicatorlight Theindictorlightwillturnonbluewhenpressedeffectively,andwillbeoff
whenimpressedorpressedformorethan16s.
B. Button#1(forwhitelight) a. Shortpress(<1.2s)
Ashortpressforlessthan1.2swillturnthewhitelighton/off.
b. Longpress(>=1.2s)
Basicfunction:toturnthewhitelighton.
Pairingfunction(withinthefirst3minafterthegrillepoweron):
Press Button #1 for more than 1.2s until the white light on,
thengrilleandwallcontrolgetpairedsuccessfully.
Tocancelthepairing,usersneedtokeeppressingButton#1
for more than 10s, until the white light reaches its highest
luminanceandgetsdimgradually.Thewhitelightwillflashtwice,
whichmeansthepairingiscancelled.
IfkeeppressingButton#1formorethan5sthen,thewhite
light will get lighter and reach its highest luminance. The white
lightwillflashtwice,whichmeansthepairedagain.
*Ifthewhitelightisnotonafteralongpressofover1.2sand
lessthan5s,whichmeansgrilleandwallcontrolarenotpaired.
Usersneedtokeeppressingformorethan5suntilthewhitelight
will get lighter and reach its highest luminance, and then grille
andwallcontrolgetpairedsuccessfully.Ifuserskeeppressingfor
morethan10s,thepairingwillbecancelled.
*Ifthewhitelightisnotonafteralongpressofover5s,which
means grille and wall control are already paired. If users keep
pressingformorethan10s,thepairingwillbecancelled.Andif
users keep pressing for more than 5s after that, it will start the
pairingagain.
C. Button#5(forcoloredlight) a. Shortpress(<1.2s)
Ashortpressforlessthan1.2swillturnthecoloredlighton/off.
In RGB sweep mode, that can turn off the colored light only. If
turnedonagain,itwillbeswitchedintoRGBstaticmode.
b. Longpress(>=1.2s)
Alongpressforover1.2swillturnontheRGBsweepmode.
IfitsalreadyinRGBsweepmode,alongpressforover1.2swill
turnitoff.
D. Button#7(forfan) a. Shortpress(<1.2s)
b. Longpress(>=1.2s)
on/off.
Ashortpressforlessthan1.2swillturnthefanon/off.
Alongpressforover1.2sandlessthan10swillturnonthefan
Alongpressforover10suntiltheindicatorlightflashtwice,will
canceltheBTconnection.10slater,userscanreconnectBT.
E. Button#2(fordecreasingluminance) a. Shortpress(<1.2s)
level,butwontturnitoff.
b. Longpress(>=1.2s)
Ashortpressforlessthan1.2swilldecreasetheluminancelevelby
A short press for more than 1.2s will decrease the luminance
gradually,notlevelbylevel,butstillwontturnitoff.
F. Button#3(forincreasingluminance) a. Shortpress(<1.2s)
Ashortpressforlessthan1.2swillincreasetheluminancelevelby
leveluntilthehighestluminance.
c. Longpress(>=1.2s)
A short press for more than 1.2s will increase the luminance
gradually,notlevelbylevel,untilthehighestluminance.
G. Button#4(forRGBcolorinvertedchange) a. Shortpress(<1.2s)
WhennotinRGBsweepmode,ashortpressforlessthan1.2swill
changeRGBcolorininvertedorderlevelbylevel.
WheninRGBsweepmode,ashortpressforlessthan1.2swillstop
theRGBsweepmode.Atthistime,anothershortpresswillmakeit
inRGBstaticmode.
b. Longpress(>=1.2s)
WhennotinRGBsweepmode,alongpressformorethan1.2swill
changeRGBcolorininvertedordercontinuously.
When in RGB sweep mode, a long press for more than 1.2s will
stop the RGB sweep mode. At this time, another long press will
makeRGBstaticchangeininvertedordercontinuously.
H. Button#4(forRGBcolorinvertedchange) a. Shortpress(<1.2s)
WhennotinRGBsweepmode,ashortpressforlessthan1.2swill
changeRGBstaticcolorinsequencelevelbylevel.
WheninRGBsweepmode,ashortpressforlessthan1.2swillstop
theRGBsweepmode.Atthistime,anothershortpresswillmakeit
inRGBstaticmode.
b. Longpress(>=1.2s)
WhennotinRGBsweepmode,alongpressformorethan1.2swill
changeRGBcolorinsequencecontinuously.
When in RGB sweep mode, a long press for more than 1.2s will
stop the RGB sweep mode. At this time, another long press will
makeRGBstaticchangeinsequencecontinuously.
Remark:
controlpaired.
3. Warning Allthefunctions,exceptforpairingfunction,workwhengrilleandwall
Button#2andButton#3workonlywhenlighton.
Button#4andButton#6workonlywhencoloredlighton.
Theoperationsshouldfollowcertainordermentionedabove.
Forfunctiondetails,pleaserefertoERD.
DISCONNECT POWER AT SERVICE ENTRANCE BEFORE CLEANING OR SERVICING. ADD GRILLE CURRENT TO FAN CURRENT FOR TOTAL CURRENT DRAW. INSTALL ONLY WITH MODELS INDICATED IN THE INSTALLATION INSTRUCTIONS. COUPEZ LALIMENTATION AU PANNEAU LECTRIQUE AVANT LES TRAVAUX DE NETTOYAGE OU DENTRETIEN. ADDITIONNEZ LA CONSOMMATION DE COURANT DE LA GRILLE CELLE DU VENTILATEUR POUR OBTENIR LAPPEL TOTAL DE COURANT. SINSTALLE UNIQUEMENT AVEC LES MODLES INDIQUS DANS LES DIRECTIVES DINSTALLATION. FCCWARING Any Changes expressly or modifications not approved by the party responsible for compliance couldvoid the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference,and (2) this device must accept any interference received, including interference that may causeundesired operation. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment . This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator &you body. ISEDC RSS warning This device complies with Innovation, Science and Economic Development Canada Compliancelicence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) thisdevice may not cause interference, and (2) this device must accept any interference,includinginterference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Innovation, Sciences et Dveloppement conomiqueCanada applicables aux appareils radio exempts de licence.L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillageest susceptible d'en compromettre le fonctionnement. ISEDC Radiation Exposure Statement:
This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolledenvironment. This transmitter must not be co-located or operating in conjunction with any otherantenna or transmitter.This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. IC exposition aux radiations:
Cet quipement est conforme avec ISEDC les limites d'exposition aux rayonnementsdfinies pour un contrlenvironnement.Cet metteur ne doit pas tre co-localiss ou fonctionner en conjonction avec une autreantenne ou metteur.Cet quipement doit tre installet fonctionner au moins 20 cm de distance dun radiateur ou de votre corps. 15B warning Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.