User Guide EYES 1 171229_EYES1 guide_EN+KN.indd 1 2018-01-02 4:57:03 01. Specification Lamp head Torsion Lamp pole DC 5V Input Power Indicator USB Output AUX in Status indicator Lamp Light Mode Adjustment Touch to adjust the lamp light mode:
Three modes (Natural light White light Yellow light). Lamp On / Off Touch to turn the LED Lamp on or off. Touch and hold to adjust the lamp brightness. Play/Pause Touch and hold for two seconds to turn the Bluetooth speaker on and to enter Bluetooth pairing mode Touch and hold for two sec-
onds to turn the Bluetooth speaker off. Touch to play or pause music. Previous Track / Volume Down (-) Touch to skip to the previous song during music playback. Touch and hold decrease the volume during music playback. Next Track / Volume Up (+) Touch to skip to the next song during music playback. Touch and hold to increase the volume during music playback. Model Size Weight Material Power Input Power Output POUT-00101W W 290mm x L 105mm x H 380mm 610g ABS, PP, Rubber DC 5V 2A Power Adapter LED Lamp : 3.5W Bluetooth Speaker : 2.5W x 1 Bluetooth Version Impedance Frequency Range Bluetooth Connection Range 10m Light Source 4.2 + EDR 4 100Hz 20KHz Light Emitting Diode (LED) Three modes
(Natural-White-Yellow) Light Mode
- 1 -
171229_EYES1 guide_EN+KN.indd 2 2018-01-02 4:57:03 02. What is in the box?
Bluetooth speaker with LED Lamp x 1 3.5mm Audio Cable x 1 User Guide 5V 2A Power Adapter x 1 User Guide
- 2 -
171229_EYES1 guide_EN+KN.indd 3 2018-01-02 4:57:03 03. Instructions for use Connecting via Bluetooth Pair the Bluetooth speaker with a mobile device. Once the devices are paired, the Bluetooth speaker will automatically connect to the mobile device whenever you turn on the Bluetooth speaker. 1. Bluetooth speaker Touch and hold the Play/Pause button for two seconds to turn the Bluetooth speaker on and to enter the Bluetooth pairing mode. The indicator light will flash blue quickly. Activate the Bluetooth feature and search for Bluetooth devices. Tap POUT EYES1 from the list of available devices. 2. Mobile device If your phone requests a paring password, please enter 0000. If the Bluetooth connection fails or the other device cannot locate the Bluetooth speaker, remove the devices informa-
tion from the other devices list. Then, try to connect again. Disconnecting or reconnecting devices You can end the current connection by pressing and holding the Play/Pause button for approximate-
ly two seconds. You can also end the connection by turning off the Bluetooth speaker or deactivating the Bluetooth feature on the connected device. If the Bluetooth connection ends due to the distance between the devices, bring the devices closer together within a certainperiod of time. The devices will automatically reconnect. Connecting to other devices After ending the connection between the Bluetooth speaker and the mobile device, you can connect the Bluetooth speaker to other devices. Connecting via an audio cable Connect the Bluetooth speaker to a device via an audio cable. When the Bluetooth speaker is connected via an audio cable, you can only adjust the volume. 1. Bluetooth speaker 2. Other device Plug the audio cable into the audio cable jack. Plug the other end of the audio cable into the audio output jack. If the Bluetooth speaker is simultaneously connected to a device via an audio cable and another device via Bluetooth, the Bluetooth speaker will only play audio from the device connected via audio cable.
- 3 -
171229_EYES1 guide_EN+KN.indd 4 2018-01-02 4:57:03 Listening to music Listen to music played on the connected device. Touch the Play / Pause button to play music. Pausing or resuming playback Touch the Play / Pause button to pause or resume playback. Adjusting the volume Touch and hold the (+) and (-) Volume button to adjust the volume during playback Skipping to other songs Touch the Next / Volume (+) button to skip to the next song during playback. Touch the Previous Volume (-) button to skip to the previous song during playback. Adjusting the lamp brightness Touch and hold Lamp On / Off button to adjust the lamp brightness. Changing the lamp mode Touch Lamp light mode adjustment button to adjust the lamp light mode:
Three modes (Natural light White light Yellow light). Status Indicator light The indicator light alerts you to the Bluetooth speakers status. Color Quickly flashes blue Status Indicator off Slowly flashes blue Continuously flashes blue Status The Bluetooth speaker is powering on and is in Bluetooth pairing mode Powered off Connected via Bluetooth AUX is connected Power Indicator light The indicator light alerts you to the Power status. Color Continuously red Power Indicator off Status Charging Disconnected
- 4 -
171229_EYES1 guide_EN+KN.indd 5 2018-01-02 4:57:03 04. Troubleshooting Your LED Lamp does not turn on When it is out of power, your LED Lamp will not turn on. Reconnect the power adapter before turning on the LED Lamp. Your Bluetooth speaker does not turn on When it is out of power, your LED Lamp will not turn on. Reconnect the power adapter before turning on the Bluetooth speaker. Your Bluetooth speaker freezes If the Bluetooth speaker freezes or hangs, try to resolve it by turning off the Bluetooth speaker and then turning it on again. If the Bluetooth speaker is still unresponsive, end the Bluetooth connection and recon-
nect it. To do this, Touch and hold the Play / Pause button for approximately two seconds twice to turn it off and turn it on again. When the Bluetooth speaker enters Bluetooth pairing mode, connect the devices again, and then check the operation of the Bluetooth speaker. If the problem is still not resolved, contact BROS&COMPANY Service Center. Your Bluetooth speaker cannot connect to another Bluetooth device Ensure that your Bluetooth speaker and the other Bluetooth device are within the maximum Bluetooth range
(10 m). On the device you want to connect with, disconnect all paired devices and try to connect again. Bluetooth connection is often disconnected If there are obstacles between the devices, the operating distance may be reduced. Ensure that your Bluetooth speaker and the other Bluetooth device are within the maximum Bluetooth range (10 m). When using the Bluetooth speaker with other Bluetooth devices, the connection may be affected by electromagnetic waves. The Bluetooth speaker works differently as described in the manual Available functions may differ depending on the connected device. The Bluetooth speaker gets dirty Gently wipe the Bluetooth speaker with a soft cloth. Do not use chemicals or strong detergents. Doing so may discolor or corrode the outside the device.
- 5 -
171229_EYES1 guide_EN+KN.indd 6 2018-01-02 4:57:03 05. Warning / Caution / Notice Please read this manual before using the device to ensure safe and proper use. Images may differ in appearance from the actual product. Content is subject to change without prior notice. Before using the device, make sure it is compatible with your device. The supplied items are designed only for this device and may not be compatible with other devices. Appearances and specifications are subject to change without prior notice. Use only Manufacturer-approved accessories. Using unapproved accessories may cause the performance problems and malfunctions that are not covered by the warranty. Use only Manufacturer-approved power adapter (more than 5V/2A for wired charging). Unapproved power adapter can cause the device to explode or damage the device. Connecting the de-
vice improperly may cause serious damage to the device. Any damage caused by misuse is not covered by the warranty. If the device receives an unstable power supply while charging, it may not function. If this happens, unplug the power adapter from the device. While connected with power source, the device may heat up. This is normal and should not affect the products lifespan or performance.
- 6 -
171229_EYES1 guide_EN+KN.indd 7 2018-01-02 4:57:03 01. Lamp head Torsion Lamp pole
+
Status indicator
, , 3 . ON / OFF. 1~2
. 1~2
.
+ , ,
. 1~2
. DC 5V Input Power Indicator USB Output AUX in POUT-00101W W 290mm x L 105mm x H 380mm 610g ABS, PP, Rubber DC 5V 2A Power Adapter LED Lamp : 3.5W Bluetooth Speaker : 2.5W x 1
- 7 -
4.2 + EDR 4 100Hz 20KHz 10m Light Emitting Diode (LED) Three modes
(Natural-White-Yellow) 171229_EYES1 guide_EN+KN.indd 8 2018-01-02 4:57:04 02.
& LED x 1 3.5mm x 1 User Guide 5V 2A x 1 x 1
- 8 -
171229_EYES1 guide_EN+KN.indd 9 2018-01-02 4:57:04 03. 1. ()
, 2 /
LED . () POUT EYES1
. LED . 2. AUX AUX () EYES1 AUX .
()
. . LED . AUX . 3. EYES1 . . 4. LED 2 . 5. ()
() / 2
. , / 2
. . 6. LED 30,000~50,000 . 7.
, . , 10m ,
. (070-7703-0139) .
- 9 -
171229_EYES1 guide_EN+KN.indd 10 2018-01-02 4:57:04 04. .
, . , ,
. .
, . .
(5V/2A ) , . ,
. , . .
- 10 -
171229_EYES1 guide_EN+KN.indd 11 2018-01-02 4:57:04 WARRANTY One Year Limited Warranty EYES1 POUT-00101W Name of Product Model Date of Purchasing Place of Purchasing Your name BROS&COMPANY INC. sells its products with the intent that they are free of defects in manufacture and workmanship for one year from the date of original purchase. BROS&COMPANY INC. warrants that its products will be free of defects in material and workmanship under normal use and service. Please fill in the blank of warranty table below. This warranty does not cover any damage caused by misuse or abuse, accident, alteration to the product, improper installation, unauthorized repairs or modifications, improper use of power supply, dropped product, environmental conditions, or any other conditions what-
soever that are beyond the control of BROS&COMPANY INC. This warranty does not extend to the purchase of opened, used, repaired, repackaged and/or resealed products, including but not limited to sales of such products on Internet sites and/or sales of such products by surplus or bulk resellers. Any and all warranties or guarantees shall immediately cease and terminate as to any products or parts there of which are repaired, modified, or altered without any permission of BROS&COMPANY INC. Copyright Copyright 2018 BROS&COMPANY INC. This manual is protected under copyright laws. No part of this manual may be repro-
duced, distributed, translated, or transmitted in any form or by any means, electronic or mechanical, including photocopying, re-
cording, or storing in any information storage and retrieval system, without the prior written permission of BROS&COMPANY INC. 171229_EYES1 guide_EN+KN.indd 12 2018-01-02 4:57:04 FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is con-nected. Consult the dealer or an experienced radio/TV technician for help. Caution Modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.