FCC ID: 2AQIS-TD-00101 Tekdec-Smart Desk

Product Specification Wireless charger 2 Wireless charger 1 Charging input port Model Size Weight Material Input TD-00101 1400x700x730mm TBD E0 PB, ABS, PC, Aluminum, Stea DC 9V 1.5~3A / 12V 1.5~3A Wireless charging output 5W/7.5W/10W/15W x 2 Frequency used 110KHz ~ 205KHz Proper use temperature 0C ~ 40C Proper storage temperature

-10C ~ 50C Whats I the box How to install & use desk Charging cable USER GUIDE User guide 1. Connect the Type C USB connector of the provided cable under the charging part of the Smart Desk. 2. Connect the Type A USB connector of the provided cable to a QC 2.0 or QC 3.0 or higher adapter (charger) and supply power. 3. Charging starts when you set the center of a smartphone or product that supports wireless charging at the center of the charging part of the smart desk. FCC Information This device complies with part 15 of the FCC Results. Operation is subject to the following two conditions :

(1) This Device may not cause harmful interface, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:

1.1. Reorient or relocate the receiving antenna. 1.2. Increase the separation between the equipment and receiver. 1.3. Connect the equipment into an outlet on a circuit different from that to which receiver is connected. 1.4. Consult the dealer or experienced radio/TV technician for help. WARNING Changes or modifications not expressly approved by the manufacturer could void the users authority to operate the equipment. IMPORTANT NOTE:

FCC RF Radiation Exposure Statement:

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Page 1 of 1 IDENTIFICATION LABEL:

PROPOSED FCC ID LABEL The FCC ID shall be permanently affixed in the rear side of the equipment

Letter of Authorization

: BROS&COMPANY INC. Seongnam-si, Gyeonggi-do, 13595, South Korea

: 1127, Owners tower, 28, Hwangsaeul-ro 200beon-gil, Bundang-gu, Company Address Product Name : Tekdec-Smart Desk Model Number : TD-00101 FCC Identifier : 2AQIS-TD-00101 We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: KIYEOL, PARK Title: CEO Date: December 23, 2021 Signature of applicant:

BROS&COMPANY INC. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: December 23, 2021 Subject; Request for Confidentiality FCC ID: 2AQIS-TD-00101 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure External Photos Test Setup Photos Internal Photos User Manual In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Name: KIYEOL, PARK Title: CEO