FCC ID: 2AAS9-TBMH120 MiniHub Pro V2

Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:

Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/CANADA

Browan Communications Inc. No.15-1, Zhonghua Rd., Hsinchu Industrial Park, Hukou, Hsinchu, Taiwan, R.O.C. 30352 Tel: +886-3-6006899 Fax: +886-3-5972970 Status Lights, Ports, and Buttons MiniHub Pro V2 Quick Guide Power Plug Adapters Status LED Solid Green: The MiniHub Pro V2 is connected to LNS. Blinking Green: The MiniHub Pro V2 is establishing the connection to LNS. Blinking Orange: Waiting for configuration (Initial boot-up). Fast Blinking Orange: The MiniHub Pro V2 is trying to connect to Wi-Fi network. Button Setup Button: Press and hold for 10 seconds to clear the Wi-Fi configuration and switch back to AP mode. Reset Button: Press and hold for 10 seconds to reset the MiniHub Pro V2 to factory default settings. Port USB-C Port: Reserved for future development. Resetting Your Mini Hub The MiniHub Pro comes with three interchangeable outlet adapters (in different SKU/Country) to fit socket standards for the United States, the European Union, and the United Kingdom. And blank power adapter cover. To reset the MiniHub Pro V2 To perform a factory reset, press and hold the reset button located on the bottom of your MiniHub Pro for ten seconds. This will clear the cache of known Wi-Fi networks and credentials.

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6967016.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case FCC Back Label US Product Name: MiniHub Pro V2 Model Name: TBMH120 FCC ID: 2AAS9-TBMH120 SN: GUSYYWWXXXXXX Gateway EUI: XXXXXXXXXXXXXXXX Wi-Fi STA MAC: XX:XX:XX:XX:XX:XX Wi-Fi SSID: TBMH120-XXXX Wi-Fi password: XXXXXXXX Input: 100-240Vac, 50/60Hz, 0.25A Made in China FCC ID:

2AAS9-TBMH120

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6967010.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6967017.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6967018.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case November 16, 2023

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6967019.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6967020.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case