Document Number Version 0.6 Created By Steve Lin GR0136 RPMA Radio Communication Module Date: Nov. 30th, 2020 Modification History Date Change log Author Revision 09/03/2017 First draft Steve Lin 0.1 13/04/2017 Version Modified. Steve Lin 0.2 26/04/2017 Version Modified. Steve Lin 0.3 15/11/2017 Current consumption value revised. Steve Lin 0.4 08/11/2017 Shield Cover Marking revised. Steve Lin 0.5 30/11/2020 Adding FCC/IC/CE Regulatory Information. Steve Lin 0.6 1 General Description The purpose of this document is to provide guidelines allowing an integrator to design a Host product that utilizes the GR0136 RPMA module and ensures that the system meets all of its technical objectives and requirements. The GR0136 RPMA module is a small form factor wireless network SiP module that easily integrates with various devices and sensors using an industry standard Serial Peripheral Interface (SPI). The top side of the printed circuit board (PCB) is enclosed with a radio frequency (RF) shield. GR0136 RPMA module is an LGA-style module designed to be soldered directly onto a host board via SMT processes. The RF technology operates on the Ingenu 2.4GHz RPMA two-way Communication Network. GR0136 can achieve a sensitivity of over -133 dBm. The high sensitivity combined with the integrated +21.5 dBm power amplifier yields industry leading link budget making it optimal for any low data rate application requiring range or robustness. RPMA also provides significant advantages in both blocking and selectivity over conventional modulation techniques, solving the traditional design compromise between range, interference immunity and energy consumption. Features Small footprint20.5 mm x 18 mm x 2.35 mm RPMA Modem
+21.5 dBm constant RF output vs. V supply High sensitivity: down to -133 dBm Excellent blocking immunity Preamble detection Embedded memory of 1 Mbytes of Flash memory 1-1 Block Diagram A simplified block diagram of the GR0136 RPMA module is depicted in the figure below. 1-2 Product Version The features of GR0136 is detailed in the following table Part Frequency Effective Est. Sensitivity Number Range Bitrate (bps)
( dBm ) Channel Bandwidth
(M Hz) GR0136 2.4 GHz 1 60bps~30Kbps
-133 Product Description RPMA Wireless Communication Module 1-3 Specification Model Name GR0136 Host Interface SPI Operation Conditions Temperature Humidity Dimension Package Storage-40 ~ +85 Operating-40 ~ +85 Operating10 ~ 95% (Non-Condensing) Storage5 ~ 95% (Non-Condensing) 20.5 mm x 18 mm x 2.35 mm LGA type 2 Electrical Characteristics 2-1. Absolute Maximum Ratings Parameter Min. Max. Unit Storage Temperature Operating Temperature Vbatt Input Voltage 3.3V Supply Digital Interface Signals, 3.3V nominal
-40
-40 2.2 3.1 3.0 85 85 6.0 3.5 3.6 C C V V V 2-2. Recommended Operating Range Operating Conditions Parameter Min. Max. Unit Input voltage, VBATT 3.3V Input Ambient Temperature, Ta 2.2 3.2
-40 5.5 3.4 85 V V C DC Characteristics Voltage Vbatt Off Current Deep Sleep Current Idle Current Receive Current values. Description Min. Typ. Max. Unit 2.2 3.3 0.05 0.1 5.5 2.0 30 26 19 20 105 120 Volt A A mA mA mA RPMA Node: Transmit Current (@21.5dBm) 325 375 Note: The above values with * mark in the DC Characteristics table are preliminary Digital Description Min. Typ. Max. Unit Description Min. Typ. Max. Unit VOL Voltage Output, Low (4mA sink) VOH Voltage Output High (4mA source) SPI Clock Note 11 Environmental Operating Temperature Storage Temp Humidity non-condensing 0.4 3.3 V V 8.6 MHz
+85
+85 95 30 C C
C/Hr. 0 2.4 0.1
-40
-40 5 Ramp Temperature (maximum rate at which operating temperature should change) MTBF (RPMA Node) TBD MHrs Receiver Description Min. Typ. Max. Unit Receiver Sensitivity
-130*
-133*
-135*
dBm Noise Figure 6.5 dB Maximum RF input level for specification compliance 3.5 5
-20*
dBm Note: The above values with * mark in Receiver table are preliminary values. General RF Characteristics Description Min. Typ. Max. Unit Frequency Range Channel Spacing 2402
~2482 MHz N/A 1.99 N/A MHz Description Min. Typ. Max. Unit Maximum RF Conducted Power Spectral bandwidth at maximum RF power:
Transmitter FCC/IC markets:
Signal Modulation Signal Bandwidth BT Factor Peak to Average Ratio
-6dB BW
-20dB BW ACPR Harmonics Transmit Power Level Accuracy Transmitter Spurious Outputs 30MHz to 2400MHz:
2482MHz to 8000MHz:
VSWR Tolerance Maximum VSWR for spec compliance Maximum VSWR for stability. 21.5 DSSS-
DBPSK 1.0 0.3 2.3 0.96 1.75 dBm MHz dB MHz MHz
-30 dBc
-43 dBm 1.5 dB
< -43 dbm
< -43 dbm 1.5:1 9:1 3 Pin Definition 3-1. Pin Assignment Pin Definition Signal Type Description GND SRQ SRDY Power Ground return Output Slave Request Output Slave Ready SPI_MISO Output SPI Master Input Slave Output SPI_CS0 Input SPI Chip Select SPI_MOSI Input SPI Master Output Slave Input SPI_SCLK Input SPI Clock 3V3 Power The 3.3V can be continuously supplied or only when the WAKE pin is asserted high. This power domain is high power (internal CPU, Transceiver, and RF PA) and should be decoupled with a low ESR, high capacitance Capacitor. TOUT is a normally low signal that pulses high in response to specific Network Timing Events. 9 TOUT Output TIME_QUAL Output This pin is used by the Extender for Node-
based timing derivation. GND GND GND GND GND Power Ground return Power Ground return Power Ground return Power Ground return Power Ground return 1 2 3 4 5 6 7 8 10 11 12 13 14 15 16 17 MRQ Input Master Request RF_SHDN RF Shutdown This pin indicates the status of the RF Transceiver for GR0136 module:
18 ON_OFF Input Low = Shutdown High = Active This is used to turn ON/OFF the Internal Power supplies of the GR0136 module. Low: Node consumes <1uA High: Node is active and will run through a wide range of power states. 19 20 WAKE VBATT Input Wake up pin Power Input power to GR0136 module. This power domain is low current but is used 100% of the time to supply Supervisory domains. 21 RF_TXENA Output This signal is used to indicate status of the Power Amplifier for the GR0136 module:
GND Power Ground return RF_PORT1 50 Ohm Low = OFF High = Enabled (Transmitting) The rise edge can be used to trigger a Host CPUs ADC read of VBATT (battery voltage while under maximum load). RF port for GR0136 module. This is 50 Ohm port, DC coupled. RF1 is required but both are desired for antenna diversity. Single port or dual antenna port can be configured in the provisioning process. GND Power Ground return RF_PORT2 50 Ohm RF port for GR0136 module. This is 50 Ohm port, DC coupled. Single port or dual antenna port can be configured in the provisioning 22 23 24 25 26 27 28 29 30 GND GND GND GND GND process. Power Ground return Power Ground return Power Ground return Power Ground return Power Ground return 4 Mechanical Dimension Unit: mm 4-1 Recommended Footprint Unit: mm TOP View 5 Recommended Reflow Profile 6 SiP Module Preparation 6-1. Handling Handling the module must wear the anti-static wrist strap to avoid ESD damage. After each module is aligned and tested, it should be transport and storage with anti -static tray and packing. This protective package must be remained in suitable environment until the module is assembled and soldered onto the main board. 6-2. SMT Preparation Calculated shelf life in sealed bag: 6 months at<40 and <90% relative humidity (RH). Peak package body temperature: 250. 3. After bag was opened, devices that will be subjected to reflow solder or other high temperature process must. A. Mounted within: 168 hours of factory conditions<30/60%RH. B. Stored at10%RH with N2 flow box. 4. Devices require baking, before mounting, if:
A. Package bag does not keep in vacuumed while first time open. B. Humidity Indicator Card is >10% when read at 235. C. Expose at 3A condition over 8 hours or Expose at 3B condition over 24 hours. 5. If baking is required, devices may be baked for 12 hours at 1255. 1. 2. 7 Package Information 7.1 Product Making Figure 1 below details the standard product marking for Gemtek GIoT products. Cross reference to the applicable line number and table for a full detail of all the variables. Gemtek Logo Piconode Model Name Part Number Node ID Node Series Number Pin 1 identifier 2D Bar Code:
S/N + NID Production date code: YYWW Figure 1 Standard Product Marking Diagram- TOP VIEW Scan result as below:
First line SN: 8 digit (HEX) Second Line NID: 8 digit (HEX) 1) 2) 8 Regulatory Information Regulatory Region Scope FCC Certificate ID 2AAS9-PICONODE Industry Canada(IC) 26296-PICONODE US Canada Europe RED(Radio Equipment Directive) No certificate ID since internal production control of Conformity assessment procedure is selected. GR0136 certification approvals Integration instructions for host product manufacturers Applicable FCC rules to module FCC Part 15.247 Summarize the specific operational use conditions The module is must be installed in mobile device. This device is intended only for OEM integrators under the following conditions:
The antenna must be installed such that 20 cm is maintained between the antenna and users, and The transmitter module may not be co-located with any other transmitter or antenna As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Limited module procedures Not applicable See the documents: GR0136_Antenna_2020_1130 & Test Procedure of embedded Antenna for GR0136 GIOT module Trace antenna designs RF exposure considerations 20 cm separation distance and co-located issue shall be met as mentioned in Summarize the specific operational use conditions. Product manufacturer shall provide below text in end-product manual This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Antennas Brand name Model name Antenna type Antenna gain Antenna connector Linx ANT-2.4-USP Mono-pole 3.8 (dBi) Taiyo Yuden AH 104F2450S1 Mono-pole (Inverted F) 1.9 (dBi) Taoglas GW.34.5153 Ethertronics 1001013 Jesoncom 10I010D Label and Compliance Information Dipole 5.89 (dBi) PIFA / magnetic Dipole 2.6 (dBi) Mono-pole 4.8 (dBi) RSMA RSMA RSMA RSMA
Product manufacturers need to provide a physical or e-label stating Contains FCC ID: 2AAS9-PICONODE with finished product Information on Test Modes and Additional Testing Requirements EMC Certification Tools, Version: 1.6.14.1shall be used to set the module to transmit continuously. Additional Testing, Part 15 Subpart B Disclaimer The module is only FCC authorized for the specific rule parts listed on the grant, and that the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. The final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed. Industry Canada statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference
(2) This device must accept any interference, including interference that may cause undesired operation of the device Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) Lappareil ne doit pas produire de brouillage;
(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This radio transmitter [IC: 26296-PICONODE] has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. Le prsent metteur radio [IC: 26296-PICONODE] a t approuv par Innovation, Sciences et Dveloppement conomique Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est suprieur au gain maximal indiqu pour tout type figurant sur la liste, sont strictement interdits pour l'exploitation de l'metteur. Brand name Model name Antenna type Antenna gain Antenna connector Linx ANT-2.4-USP Mono-pole 3.8 (dBi) Taiyo Yuden AH 104F2450S1 Mono-pole (Inverted F) 1.9 (dBi) Taoglas GW.34.5153 ethertronics 1001013 Jesoncom 10I010D Dipole 5.89(dBi) PIFA / magnetic Dipole 2.6 (dBi) RSMA RSMA RSMA
Mono-pole 4.8 (dBi) RSMA Radiation Exposure Statement:
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. radiations:
Dclaration Cet quipement est conforme Canada limites d'exposition aux radiations dans un environnement non contrl. Cet quipement doit tre install et utilis distance minimum de 20cm entre le radiateur et votre corps. d'exposition aux This device is intended only for OEM integrators under the following conditions:
1) The transmitter module may not be co-located with any other transmitter or antenna. As long as 1 condition above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Cet appareil est conu uniquement pour les intgrateurs OEM dans les conditions suivantes:
1) Le module metteur peut ne pas tre complant avec un autre metteur ou antenne. Tant que les 1 condition ci-dessus sont remplies, des essais supplmentaires sur l'metteur ne seront pas ncessaires. Toutefois, l'intgrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformit supplmentaires requis pour ce module install. IMPORTANT NOTE:
In the event that these conditions can not be met (for example certain laptop configurations or co-
location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization. NOTE IMPORTANTE:
Dans le cas o ces conditions ne peuvent tre satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre metteur), l'autorisation du Canada n'est plus considr comme valide et l'ID IC ne peut pas tre utilis sur le produit final. Dans ces circonstances, l'intgrateur OEM sera charg de rvaluer le produit final (y compris l'metteur) et l'obtention d'une autorisation distincte au Canada. End Product Labeling The final end product must be labeled in a visible area with the following: Contains IC:26296-
PICONODE. Plaque signaltique du produit final Le produit final doit tre tiquet dans un endroit visible avec l'inscription suivante: "Contient des IC: 26296-PICONODE". Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Manuel d'information l'utilisateur final L'intgrateur OEM doit tre conscient de ne pas fournir des informations l'utilisateur final quant la faon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final module. Le manuel de l'utilisateur final doit inclure toutes les informations rglementaires requises et avertissements comme indiqu dans ce manuel. intgre qui ce