Quick Start Guide Wi-Fi 6 AX1800 Dual-Radio In-Wall AP Model: MI13 Your AP 1 1 5 4 2 3 No. 1 WAN: For PoE Power IN/data transfer 2 3 4 5 Reset LAN1: For PoE Power OUT/data transfer LAN2~LAN4: Data transfer LED LED Status Flash Green / Off every second Flash Green / Blue every second Steady Green Flash Blue / O every second Steady Blue Flash Red / O every second Flash Green / Red every second The device is boong up The device has lost network connecvity The device is operated in standalong mode The device is connecng to PrismX The device is operated in cloud mode The device status abnormal FW upgrading Installing the Wall Mount 1 Secure the mounng bracket to the wall using 2 screws
. 2 Connect RJ45 cable (with PoE) to WAN port of your AP 3 Secure your AP to the monng bracket Accessing the APs Sengs Menu 1. Congure your PCs IP seng to DHCP to automacally retrieve an IP address. 2. Connect your PCs Wi-Fi to the SSID printed on the rear of the AP that corresponds to the frequency of the connecon (2.4G / 5G) using the password passphrase 3. Enter the IP address 192.168.2.1 in your browser. 4. In the PRISM login screen use the following login:
Username: prism Password: prism 3 1. Congure your PCs IP seng to stac and then set the IP address to any address from 192.168.19.2 to 192.168.19.250. 2. Connect your PCs network port to the WAN port on the AP. 3. Enter the IP address 192.168.19.1 in your browser. 4. In the PRISM login screen use the following login:
Username: prism Password: prism 3 1. Congure your PCs IP seng to DHCP to automacally retrieve an IP address. 2. Connect your PCs network port to any of the LAN port on the AP. 3. Enter the IP address 192.168.2.1 in your browser. 4. In the PRISM login screen use the following login:
Username: prism Password: prism 3 Regulatory Statements IC Warning This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement."
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotopically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Selon les rglements d'Industrie Canada, cet metteur radio ne peut fonctionner qu'
l'aide d'une antenne d'un type et d'un gain maximal (ou moindre) approuv pour l'metteur par Industrie Canada. Pour rduire les interfrences radiolectriques potentielles avec d'autres utilisateurs, le type d'antenne et son gain doivent tre choisis de telle sorte que la puissance quivalente rayonne (p.i.r.e.) ne soit pas suprieure celle ncessaire pour une communication russie. STATEMENT OF RADIATION EXPOSURE:
This equipment complies with the limites of exposure to IC radiation established for an uncontrolled environment. This equipment must be installed and used with a minimum of 20cm distance between the radiation source and your body. DCLARATION D'EXPOSITION AUX RADIATIONS:
Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20cm de distance entre la source de rayonnement et votre corps. The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. This device complies with CAN ICES-3 (B)/NMB-3(B). FCC statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. R ED 2014/53/EU Declaration of Conformity Hereby, Suzhou WINTECH Electronics Technology Co., Ltd. declares that this Wi-Fi 6 AX1800 Dual-Radio In-Wall AP product is in compliance with essential requirements and other relevant provisions of Directive 2014/53/EU. 2.4GWi-Fi Frequency range: 2412-2472MHz, Maximum E.I.R.P: 18.09dBm 5G Wi-Fi Frequency range: 5180-5240MHz, Maximum E.I.R.P: 22.03dBm 5260-5320MHz, Maximum E.I.R.P: 22.08dBm 5500-5700MHz, Maximum E.I.R.P: 24.93dBm 5745-5825MHz, Maximum E.I.R.P: 13.67dBm The device complies with RF specifications when the device used at 20cm form your body. The device support wlan 5G(5150-5250MHz), and wlan 5G(5180-5240MHz) only used to indoor.