Download User Manual Download Bryton Active App Rider 750 SE Quick Start Guide www.brytonsport.com Bryton A01 Getting Started POWER / LOCK A C RECORD / PAUSE PAGE DOWN B D PAGE UP PC At least 4 Hours Touch Screen Gestures 1. Swipe up from the very bottom of the screen to return to the Home Page from any screen. 2. Swipe left or right to switch data pages. ENG Key Functions POWER/LOCK ( ): Press to turn the device ON. When on, long press to turn the device off.Press to lock/unlock the screen. PAGE DOWN ( < ): Press to page down. RECORD/PAUSE ( ):Press to start recording. When recording, press to manually pause. Then you can choose to save/discard/resume the ride by clicking on the screen. PAGE UP ( > ): Press to page up. Reboot Rider Press ( / < / / > ) at the same time to reboot the device. Getting Started Please charge your device for at least 4 hours and make sure the device firmware is up to date* before first use.To begin Press to turn on the device. 2. Scroll through the list and select the display language. Select the units of measurement. 4. The device will automatically search for satellite signals.You can view the GPS signals status on the screen or the quick status. 5. After the GPS signal is fixed *( ), choose a profile to start the ride in free cycling mode. 6. To record, press to start recording.
*Check and update your device firmware version via Bryton Active app.
*To acquire GPS signals, allow the device access to an open sky, outdoor environment. Data Sync Sync Data to/from Bryton Active app With the Bluetooth connection, your Rider computer can upload recorded tracks, download planned trips, and update the firmware via Bryton Active app. It is required to add your device to your Bryton Active account before syncing data for the first time. To add. 1. Sign up / log in to your Bryton Active App account. 2. Go to Settings and click + to add a new device to your account. 3. Select your device and tap Yes to add your device to your Bryton Active account. 4. Your device is now successfully paired with the Bryton Active App. 5. Click the device icon to initiate the activity sync. You can enable the Auto Sync Track feature as well. Upload / Share Your Tracks via USB 1. Connect the device to your computer via the included USB cable. 2. Select fit files from Bryton -> Activities folder in the device. 3. Upload files to brytonactive.com and popular training sites including STRAVA, TrainingPeaks, Endomondo, Map My Ride, Fit track and many more. Preloaded Map Rider 750 SE includes regional preloaded maps. If the region you need is not preloaded, you can download it by yourself. You can manage your map via Bryton Update Tool and Bryton Active app. Navigation With the full navigation features on Rider 750 SE, you can always stay safe on your planned tracks and never get lost again!
1. Select Navigation in the home page. 2. Select and speak your destination slowly and clearly. You can also manually pin a destination on the Map. 3. Results of the location search are shown on the list. 4. Select one location and select to start navigating. Follow Track Rider 750 SE provides 3 ways to create tracks. 1. Plan trip via Bryton Active App. 2. Import GPX track files via Bryton Active app. 3. Auto sync routes from Strava, Komoot, and RideWithGPS. Plan trip via Bryton Active App 1. In the Bryton Active App, select Course >My Route> Plan Trip to set a Start point and Destination by tapping on the map or inputing address in the Search Bar. 2. After finishing planning, save the planned trip to "My Route" by tapping Save. 3. Go to "My Route" and tap the route. Click the to download it to the device. 4. In the Device Main Menu, navigate to "Course" > "Route". Find the route and tap to start following the track. Import GPX track files via Bryton Active App 1. Download routes in GPX format from any other source. 2. Select "Open in Active"
(for iOS) or Open files with Bryton Active App (for Android). 3. Select "Course" > "My Route" in Bryton Active App. 4. Here you can see the routes imported to the App. 5. Click the to download it to the device. 6. In the Main Menu of the device, navigate to "Course" > "Route". Find the route and tap to start following the track. Auto sync routes from Strava, Komoot and RideWithGPS 1. In the Bryton Active app, select Course >My Route>3rd party account link. 2. You can enable STRAVA/Komoot/RideWithGPS auto sync there. 3. Once authorized, you can see routes from those platforms in My route with their icons. 4. Click the to download it to the device. 5. In the Main Menu of the device, navigate to "Course" > "Route". Find the route and tap to start following the track. Icon Description Screen Locked Status Off Recording Heart Rate Sensor Zoom Out Zoom In Recording Pause Speed Sensor Active Move the Map Device Battery Cadence Sensor Location Unable GPS Combo Sensor Compass Mode GPS Off /
No Signal (not fixed) Weak Signal Strong Signal GPS Data Update Power Meter Active Heading Mode Di2 E shifting Radar Destination Stop Workout Route Distance Menu Smart Trainer Altitude Gain LiveTracking E-bike (Shimano) Climb Section Phone Disconnected E-bike (LEV) Climb Challenge Phone Conncected Light Retrace Ride 3. Tap to pop up quick status windows 4. Long press on data field to focus the data grid, then tap the field again to start editing. Road Indoor MTB Gravel Cyclecross Favorite Smart Notifications Voice Search Delete Workout Step Control Input ID Connect Add New Trainer Passive Mode Information Navigation Add a Pin Navigation To Start Saved Workouts/Location History Route Rider 750 SE Specications Item Description Display Physical Size Weight Operating Temperature Battery Charging Temperature Battery Battery Life
"2.8" color TFT 240x400 capacitive touch screen"
2.8TFT 52x93x19.4mm 93g
-10C ~ 50C 0C ~ 40C Li polymer rechargeable battery 24 hours with open sky 24 ANT+
Featuring certied wireless ANT+ connectivity. Visit www.thisisant.com/directory for compatible products
. GNSS Integrated high-sensitivity GNSS receiver with embedded antenna BLE Smart Water Resistant Bluetooth smart wireless technology with embedded antenna;
2.4GHz band 0dBm Water resistant to a depth of 1 meter for up to 30 minutes.
[ 130 ]
Barometer Equipped with barometer RF Exposure Information (MPE) This device meets the EU requirements and the International Commission on Non-Ionizing Radiation Protection (ICNIRP) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. To comply with the RF exposure requirements, this equipment must be operated in a minimum of 20 cm separation distance to the user. Hereby, Bryton Inc. declares that the radio equipment type Bryton product is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
http://www.brytonsport.com/download/Docs/CeDocs_Rider750SE.pdf For more information on E-label regulations and compliance, as well as identification markers, relevant software, product and licensing information and other regulatory information provided by the FCC or regional compliance markings, please navigate to Settings > About. NCC >
: GPS GPS enabled cycling computer
(): Rider 750 SE Restricted Substances and Its Chemical Symbols Lead
(Pb) Mercury
(Hg) Cadmium
(Cd) Hexavalent chromium
(Cr+6) Polybrominated biphenyls
(PBB) Polybrominated diphenyl ethers
(PBDE) Unit 1. 0.1 wt % 0.01 wt %
Note 1:Exceeding 0.1 wt %andexceeding 0.01 wt %indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 2. Note 2: The indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 3. Note 3: The indicates that the restricted substance corresponds to the exemption. Route Starting Point Route Ending Point Note:
For Video Instructions, please go to www.brytonsport.com> (Menu) > Support >
Tutorial. For User Manual, please go to www.brytonsport.com> (Menu) > Support >
Download > Manual > User Manuals. Designed by Bryton Inc. Copyright 2023 Bryton Inc. All rights reserved. The content of this manual is subject to change without prior notice. 3S Powerw182Altitude Gainm1292Grade%2Trip Time04:32CaloriesKCAL1728Cadencerpm72Ride Time03:21:38Speedkmh23.2TimePM03:023S Powerw182Altitude Gainm1292Grade%2Trip Time04:32CaloriesKCAL1728Cadencerpm72Ride Time03:21:38Speedkmh23.2TimePM03:02CATEGORYDistanceEnergySpeedAltitudeTime3S Powerw182Altitude Gainm1292Grade%2Trip Time04:32CaloriesKCAL1728Cadencerpm72Ride Time03:21:38Speedkmh23.2TimePM03:0221:3585%60188HeadlightAutoHigh SolidLowSolidHi Brooke, you have an appointment on May 5th at...12:55EyePlus ClinicView MoreSpeedkmh23.2Trip Time04:32:21Cadencerpm723S Powerw182Altitude Gainm1292Grade%2Trip Time04:32CaloriesKCAL1728Cadencerpm72Ride Time03:21:38Speedkmh23.2TimePM03:023S Powerw182Altitude Gainm1292Grade%2Trip Time04:32CaloriesKCAL1728Cadencerpm72Ride Time03:21:38Speedkmh23.2TimePM03:02Speedkmh23.2Trip Time04:32:21Cadencerpm7221:3585%Last Ride2022/01/23On My ROADNavigation21:3585%Last Ride2022/01/23On My ROADNavigation Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0.5 centimeters between the radiator and your body. This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This device complies with Industry Canada licence-exempt RSS-247 standard. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.