EM-R100 User Manual We think people We think healthy hearing Think Like A Customer!
CONFIDENTIAL 1 EM-R100 Table of Content We think people We think people We think healthy hearing We think healthy hearing 1. EM-R100 Structure 2. Power / Pairing 3. Hearing Through Remote Microphone 4. Battery Check/
Recharge 5. EM-R100 Specification Think Like A Customer!
2 1. EM-R100 Structure We think people We think people We think healthy hearing We think healthy hearing Upper Button LED Charging Port Bottom Clip Think Like A Customer!
3 2. Power / Pairing Power We think people We think healthy hearing Function State Key LED Power On Power On Button Press 1 Second Blue 1 Second On Battery level LED Power Off Power Off Button Press 3 Seconds Red 1 Second On Power On / Off operates even when USB cable is connected Plugging and unplugging the charger does not affect the Power On / Off status. LED blinks 3 times according to the battery level after Power On Red LED blinks 4 times every 5 seconds when battery is low. Pairing Function State Key LED Auto Pairing OFF(Connection histroy X) Button 1s Manual Pairing OFF(Connection history O) Button 3s
- Pairing Red/Blue blinks alternately
- Auto power off after 3 minutes
- Connected Blue blinking 2 times Auto Pairing : When there is no connection history, the EM-R100 automatically enters Pairing Mode after Power On Manual Pairing : When you are trying to connect to another device with a connection history. Think Like A Customer!
4 3. Hearing Through Remote Microphone We think people We think healthy hearing Sink device (EM-C110) connected with Mic input sound playback automatically Place the EM-R100 and EM-C110 closely when in pairing mode. Be sure to turn off the BeethoSOL mode of the EM-C110 when using the EM-R100. When EM-R100 and EM-C110 are paired and connected, it will automatically play the sound. After EM-R100 or EM-C110 is rebooted, it will pair automatically, and sound will be played back. EM-C110 <-> Connect with Smartphone When RM-R100 and EM-C110 are connected and EM-C110 and smartphone are connected, rebooting the EM-C110 will connect both EM-R100 and smartphone. EM-R100 mic sound will be played by default. EM-C110 plays a call sound without playing the EM-R100 sound when calling / receiving a call with smartphone. At the end of the call, the EM-R100 sound will be played again. Volume Adjustment You can adjust the volume of the Mic sound played when connecting EM-R100 and EM-C110 with the jog switch of EM-C110. Function State Key Volume Up Volume Down Every Status Vol.Up press up Vol.Down pre ss down LED
-
Audio Indication
(Voice Prompt / Tone) Vol 0: long low beep 1 time Vol 1~14: short beep 1 time Vol 15: short high beep 1 time Think Like A Customer!
5 4. Battery Check / Charging Manual Battery Check We think people We think healthy hearing Function State Key LED Battery Check Power on (Charger not connected) Button Press 2 Times 100 ~ 70% -> Blue 3 Times 70 ~ 20% -> Purple 3 Times 20 ~ 0% -> Red 3 Times Charging Open the USB port on the bottom and charge USB Function Key Remaining Battery Charging Charger Connected 100%
80% Above 80% Below LED Blue Purple Red Think Like A Customer!
6 5. EM-R100 Specification Feature AUDIO DSP Mic Amp Microphone We think people We think healthy hearing Spec. EM-R100 X Applied 1 Mic H/W LED 3-Color, Side view (Blue, Purple, Red) Button & Key Charger I/O Bluetooth Version Clip Color Weight (mm) Size (mm) Battery Body Time Operation Time Charging Time 1EA (TACTILE) Micro USB B 5.0V Clip Type Navy Blue / Black 12g 49.05 x 30.37 x 7.81 (Except Clip Thickness) DC 3.7V / 210mAh 10Hrs 2.5Hrs Output power E.I.R.P 4.00 dBm @2402~2480 MHz Function Sound Amplifying Function Think Like A Customer!
7 Declaration of Conformity BSL Co., Ltd. declares that this device complies with the essential requirements and relevant provisions of Directive 2014/53/EU. Go to http://www.bsl.co.kr/ to view the Declaration of Conformity We think people We think healthy hearing Think Like A Customer!
8 FCC Warning Statement FCC Part 15.19 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Part 15.21 Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the user's authority to operate the equipment. We think people We think healthy hearing FCC Part 15.105 Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Modifications not expressly approved by the manufacturer could void your authority to operate the equipment under FCC rules. FCC RF Radiation Exposure Statement This equipment complies with FCC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. Think Like A Customer!
9