FCC ID: WBKCPX80I 5G CPE

Welcome to the SRP Series Device Architecture RS232/485 Cable Definition Power Cable Definition 5G CPE CPX80I Quick Start Guide

~ 70 endurance, they offer industrial-grade SRP series ruggedized outdoor router provides 5G NR service in a ruggedized form factor. With an operating temperature range of -40 environmental qualications while providing higher speed data services for video and other bandwidth-intensive applications. SRP seriesindustrial router has very strong anti-vibration ability and it is qualied for extreme industrial environments and ideally suited for rail, transportation, mining, oil and gas, manufacturing, and other outdoor applications. Withthe diverse self-developed 5G NR embedded modules integrated,SRP seriesindustrial router can support multi-band for Private 5G NR, even support uncommon frequencies.SRP seriesindustrial router can provide accurate real-time location information. This document will serve as a quick start guide forSRP series ruggedized outdoor router. In this document, theSRP series ruggedized outdoor routerwill be replaced by the router. 7 6 10 RS232 and DIDO port LED interface 5G NR antenna interface

(ANT1-ANT3: Diversity ANT4: Main) 3 6 9 1 2 3 4 5 8 9 11 LAN1/WAN port RS485 port Ground screws No RF signals transmit Power port LAN2 port SIM interface GNSS antenna interface 1 4 7 10 2 5 8 11 The reset button is beside SIM interface, if press Note1 1s, router will restart; If press on for 10s, the router will reset to factory defaults. Note2 of device. There are two white ground screws also at behind RS232/485 cable definition Number Colors RS485 RS232+DIDO 1 2 3 4 5 6 7 8 Orange&white Orange NC NC Green&white RS_GND Blue RS_GND DO2 DI2 DO1 DI1 Blue&white RS_GND RS_GND Green RS_GND RS_GND Brown&white RS485_B RS232_TX Brown RS485_A RS232_RX LAN/WAN Cable Definition LAN/WAN cable definition Number Colors LAN/WAN 1 2 3 4 5 6 7 8 Orange&white MDI0+/RJ45-1 Orange MDI0-/RJ45-2 Green&white MDI1+/RJ45-3 Blue MDI2+/RJ45-4 Blue&white MDI2-/RJ45-5 Green MDI1-/RJ45-6 Brown&white MDI3+/RJ45-7 Brown MDI3-/RJ45-8 1 2 3 Power cable definition Number Colors PWR 1 2 3 4 Red PWR_Positive Black PWR_GND NC NC NC NC Working Environment Operating Temperature

-40

~ 70

-40

~ 85 5% ~ 95%

9 ~ 36VDC 20W IP67 Storage Temperature Humidity Power Supply Power Consumption Water and Dustproof Packing List Items Accessories 1 2 3 4 5 6 7 A-Code cable to RJ45 jack ADC2

(Ethernet cable) A-Code 8-Pin cable ADB1 (Data cable) A-Code 4-Pin cable M12A (Power cable) Mounting bolt Grounding cable Protective cap (TNC) Protective cap (M12) 4 Hardware Configuration Install SIM Cards Step1 cover. Use a cross screwdriver to remove the SIM card Slide the SIM cards into the SIM slots until they click Step2 into place. By default, the SIM card in slot 1 (the upper slot) is the Primary SIM card. When the SRP router is powered on or rebooted, it automatically connects to the network associated with the Primary SIM card. Step3 Re-attach the cover. Connect and Turn on the Router Please connect the protecting ground cable as rst step, connect 9-36 VDC power cable as the last step. 1.Connect the protecting ground cable. 3.Connect the GNSS antenna if applicable. 2. Connect the ANT1, ANT2, ANT3 and ANT4 5G NR antennas. (It is recommended to have all connected) 6.Connect 9-36 VDC power cable. 4.Connect a computer to the router with an Ethernet cable. Qty 1 1 1 4 1 6 5 Primary SIM1 SIM2 5 5.Connect devices to the RS232/RS485/DIDO ports. Connect to the Network When the router is powered on, a green PWR LED may occur. This indicates that the power input is good. 6 Once the router s radio module is congured for the SIM card, it begins the activation/provisioning process and attempts to connect to the mobile network. This process typically takes several minutes. A successful connection is indicated by a solid green NET LED. And the strength of the RF signal can be indicated by the Signal LEDs in different quantity. Step2 Enter the username and password, and click Login. Step3 web management page. After the password is veried, you can login to the Step1 Choose Network > Radio Settings. Step2 tion of 5G NR network. On Radio Settings page, you can set the congura-

In the 5G Status list, you can view the 5G NR status, Step3 such as Frequency, RSSI, RSRP, RSRQ,CINR, SINR, Cell ID and etc. Indicator Status PWR NET RSSI Green Off Green Off Blinking Green Yellow Red Off Description Power on No power supply Registered to network Not register to network Searching network Signal strong Signal good Signal weak No signal Red Blinking No SIM or SIM error Software Configuration The default username and password are both admin. If you want to view or congure the router, you should use the super account to login to the web management page. The default super username is superadmin, and the password is admin. Login to the Web Management Page Radio Settings Step1 the address bar, and press Enter. Launch the web browser, enter http://192.168.1.1 in The router does not support SIM card hot-plug, please confirm that the device is powered off when the SIM card is inserted or removed. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, includ-

ing interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Caution!

Any changes or modications not expressly approved by the party responsible for compliance could void the user's authori-

ty to operate the equipment. FAQs The POWER indicator does not turn on. Make sure that the power cable is connected properly and the router is powered on. Make sure that the power supply is compatible with the router. Fails to Login the web management page. Make sure that the router is powered on. Verify that the router is correctly connected to the com-

puter through a network cable. If the problem persists, please contact the authorized local service suppliers. The router fails to search for the wireless network. Check if the power supply is connected properly. Check if the router is placed in an open area that is far away from obstructions, such as concrete or wooden walls. If the problem persists, please contact the authorized local service suppliers. The parameters are restored to default values. If the router is powered off unexpectedly while being congured, the parameters may be restored to the default settings. After congure the parameters, download the congura-

tion le and restore the desired settings quickly. 7 8 9 10 11

@ was DG CPE N48/78 Model No:CPX801 WPA2-PSK: XXXXXXXX Device IP: 192.168.1.1 pen Name: admin S/N:1234567890123456 asswor' ei Beit te ofthe FOC Rules. Operation i aulject ote lowing wo condone:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, IMEI:1234567890123456 Ineuding intereence that may case undesired OOO Tee MAC: 123456789012 Li aa eens POWER RATING:24V = 1A MADE IN CHINA

BTI Wireless TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding:

Confidentiality Request regarding application for FCC ID: WBKCPX80I LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions BOM List Tune up procedure The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Richard Xu Signature:

On behalf of Company: BTI Wireless Telephone: 1-214-850-1676 E-mail: richard.xu@btiwireless.com Title: Technical Director

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name BTI Wireless Applicant Declaration Address Grantee Code FCC ID Authorized Contact Name Contact Email Contact Phone 14600 Industry Circle,La Mirada,California 90638, United States WBK WBKCPX80I Richard Xu richard.xu@btiwireless.com 1-214-850-1676 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

a) b) c) d) e) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature:

Date:2023-01-11 Print Name: Richard Xu Title:

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Technical Director Applicant Declaration Rev:0.0

BTI Wireless Date: 2023-01-11 TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID:WBKCPX80I To whom it may concern:

We, the undersigned, hereby authorize Compliance Certification Services (Kunshan) Inc and Winkey Wang in Compliance Certification Services (Kunshan) Inc to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with BTI Wireless This authorization is valid until further written notice from the applicant. Print Name: Richard Xu Signature:

Title: Technical Director On behalf of Company: BTI Wireless Telephone: 1-214-850-1676 E-mail: richard.xu@btiwireless.com