all | frequencies |
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|
manual | photo | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 2.70 MiB | August 25 2023 | |||
1 |
|
External photos | External Photos | 691.52 KiB | August 25 2023 | |||
1 |
|
Label | ID Label/Location Info | 320.08 KiB | August 25 2023 | |||
1 |
|
Attestation letter | Attestation Statements | 72.00 KiB | August 25 2023 | |||
1 |
|
Auth Letter | Cover Letter(s) | 21.38 KiB | August 25 2023 | |||
1 |
|
FCC Change ID-Cover Letter 1 by orignal application | Cover Letter(s) | 25.54 KiB | August 25 2023 | |||
1 |
|
FCC Change ID-Cover Letter 2 by new application | Cover Letter(s) | 18.51 KiB | August 25 2023 | |||
1 |
|
FCC U.S. agent Letter | Attestation Statements | 76.83 KiB | August 25 2023 | |||
1 |
|
QSF27-14-04 Rev1.0 Applicant Declaration Letter | Attestation Statements | 159.20 KiB | August 25 2023 |
1 | User Manual | Users Manual | 2.70 MiB | August 25 2023 |
MP_PS User Manual Remote Unit Model No:
PS-R222030708 MP_PS MID POWER Digital Radios 37dBm per Band Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 1 Mid POWER Digital Radio Revision History Revision Number 1.0.0 Revision Date 28th June 2020 Summary of Changes Draft Author WANG XIAN Copyright 2020 BTI All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission from BTI. All copyright, confidential information, patents, design rights, and all other intellectual property rights of whatsoever nature contained herein are and shall remain the sole and exclusive property of BTI. The information furnished herein is believed to be accurate and reliable. However, no responsibility is assumed by BTI for its use or any infringements of patents or other rights of third parties resulting from its use. The BTI and CrossFire names and logos are trademarks or registered trademarks of BTI. All other trademarks are the property of their respective owners. Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 2 Mid POWER Digital Radio Content Preface .................................................................................................................................................................................... 5 Warnings ............................................................................................................................................................................. 5 Site Considerations .............................................................................................................................................................. 6 Environmental Considerations ............................................................................................................................................ 6 Warning Marks .................................................................................................................................................................... 7 Installation Preparation ........................................................................................................................................................... 8 Unpacking and Inspecting ................................................................................................................................................... 8 Inspecting the Packing Container .................................................................................................................................... 8 Unpacking the Device ...................................................................................................................................................... 8 Verifying the Contents ..................................................................................................................................................... 9 Inspecting the Device ...................................................................................................................................................... 9 Installation Preparation ....................................................................................................................................................... 9 Site Investigation ............................................................................................................................................................. 9 Installation Tools ........................................................................................................................................................... 10 Torque Settings ............................................................................................................................................................. 10 Clearance ....................................................................................................................................................................... 10 Installing the Access Unit (AU) .............................................................................................................................................. 11 Accessories List .................................................................................................................................................................. 12 Rack Installation ................................................................................................................................................................ 12 Wall Installation ................................................................................................................................................................. 18 AU Mounting Dimension Spacing ...................................................................................................................................... 21 RF Connection ................................................................................................................................................................... 22 Installing the Remote Unit (MP_PS) ...................................................................................................................................... 23 MP_PS Accessories ............................................................................................................................................................ 23 Wall Installation (Back on the Wall) .................................................................................................................................. 24 Wall Installation (Side on the Wall) ................................................................................................................................... 31 MP_PS Wall Mounting Dimension Spacing ....................................................................................................................... 37 Pole Installation ................................................................................................................................................................. 38 Rack Installation ................................................................................................................................................................ 39 MP_PS Wall Mounting Dimension Spacing ....................................................................................................................... 44 Optical Connection ................................................................................................................................................................ 45 Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 3 Mid POWER Digital Radio Optical Transceiver Module .............................................................................................................................................. 45 Single Port Bidirectional SFP Transceiver ...................................................................................................................... 45 Dual Port SFP Transceiver .............................................................................................................................................. 45 Optical Indicator ............................................................................................................................................................ 46 Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 4 Mid POWER Digital Radio Preface Warnings All the following Safety Precautions must be observed during the entire installation and operation of the CrossFire system. The CrossFire system components are designed for maximum safety and reliability when they are installed, used, and maintained by trained and qualified technicians following the procedures and instructions contained in this manual. To assure the safe operation of your system, always follow the safety and operational recommendations in this manual. MP_PS is not a consumer product. Please install and use MP_PS in accordance with the instructions. Before installing or modifying any MP_PS equipment, read and fully understand the entire instructions in this guide. Only qualified personnel are authorized to install and maintain the MP_PS. Changes or modifications to the MP_PS equipment not expressly approved by the manufacturer could void the product warranty and the users authority to operate the equipment. Follow Electro Static Discharge precautions to avoid any damage to PCB, PSU, etc. Keep equipment powered-off during installing or modifying. Low path loss cables connected to antennas are highly recommended. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC License to operate this device. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation. This is NOT a CONSUMER device. It is designed for installation by an installer approved by an ISED licensee. You MUST have an ISED LICENCE or the express consent of an ISED licensee to operate this device. Il ne s'agit PAS d'un dispositif CONSOMMATEUR. Il est conu pour tre install par un installateur agr par un titulaire de licence ISED. Vous devez avoir un LICENCE ISED ou le consentement exprs d'un titulaire de licence de l'ISED pour l'utilisation de cet appareil. To comply with FCC RF exposure compliance requirements, each individual antenna used for this transmitter must be installed to provide a separation distance greater than 160cm or more from all persons during normal operation and must not be co-
located with any other antenna for meeting RF exposure requirements. Pour se conformer aux exigences FCC en matire dexposition RF, chaque antenne utilise pour cet metteur doit tre installe pour assurer une distance de sparation suprieure ou suprieure 160 cm de toutes les personnes pendant le fonctionnement normal et ne doit pas tre co-localise avec une autre antenne pour satisfaire aux exigences dexposition RF. Antenna gain should not exceed 0.1 dBi. Le gain dantenne ne doit pas dpasser 0.1 dBi Note: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 5 Mid POWER Digital Radio This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. Note: Only authorized person can enter the area where the antenna is installed. And the person is fully aware of the potential for exposure and can exercise control over his or her exposure by leaving the area or by some other appropriate means. Awareness of the potential for RF exposure in a workplace or similar environment can be provided through specific training as part of a RF safety program NOTE: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Site Considerations 1. The system delay should be taken into consideration when there are neighboring BTS sites overlapping in coverage. Normal use of the system will not damage the base station; however, with the increase of RU during network coverage for indoor distribution, the uplink output noise level may affect the sensitivity of the base station, which should be considered during engineering design. Pick an ideal easy-to-reach location for installation convenience. 2. Pick an ideal easy-to-reach location for installation convenience. 3. Verify that there is a minimum of a 50cm radius of space around CrossFire equipment for the convenience of maintenance and on-site inspection. 4. Install CrossFire close to the service area for monitor and debugging. Environmental Considerations Humidity and temperature can adversely effort the reliability of the CrossFire system. Therefore, it is highly recommended to install the equipment in locations with stable humidity, temperature and ventilating. The equipment has to operate at humidity level and temperature range as follow:
Maximum humidity: 85%
AU Operating Temperature range: -10C to +50C MP-PS Operating Temperature range: -40C to +50C Storage Temperature range: -40C to +70C Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 6 Mid POWER Digital Radio Warning Marks The warning marks on the CrossFire shell should be kept clean, readable, and identifiable. ALWAYS disconnect all lines and power connections before servicing or disassembling this equipment. Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 7 NEVER touch the surface after power on the devices. For performance and safety reasons, NEVER disassemble and remodel the devices. Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 8 Mid POWER Digital Radio Installation Preparation Unpacking and Inspecting This section discusses the procedures for receiving the shipment, inspecting the packing container, unpacking, and inspecting the device. Inspecting the Packing Container Handle the packing container carefully. Inspect the packing container immediately on arrival at the installation site to verify that no apparent damage occurred during shipment. Ensure that the container is sound and that the waterproof and vibration warning notices are still visible. If possible, always inspect the equipment in the presence of the delivery person. If any damage is observed:
1. Do not open or unpack the container. 2. 3. 4. Immediately contact the transportation carrier and notify them of the damage. File a claim with the carrier once you determine the extent of any damage. Return it to BTIs nearest RMA facility and contact BTI for RMA processing. Unpacking the Device If the container appears to be in satisfactory condition:
1. 2. 3. 4. Ensure both user and supplier representatives are in attendance during shipment inspection. Confirm where you will store the device. Ensure procedures are in place to handle the device and other equipment properly. Ensure the following tools are available to unpack the shipment: hammer, paper cutter, and crowbar. 5. Open the packing container carefully. The device is contained in a protective package inside the packing container; however, caution is still necessary so as not to damage the internal package and device. 6. Remove the internal package from the packing container. 7. Unpack the device from the internal package carefully. Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 9 Mid POWER Digital Radio Verifying the Contents To verify the contents of the package:
1. Verify that the contents and quantities agree with the Delivery Packing List. 2. Check the device model against the Delivery Packing List. 3. Notify BTI immediately if any discrepancies are discovered, to verify whether the complete and correct shipment has been received. Inspecting the Device After unpacking the device, place the device on solid ground and check the following to ensure the device has not been damaged:
1. 2. 3. 4. 5. 6. 7. Inspect the devices appearance, overall dimensions, and weight. Check that the device has not been deformed or bent in any way. Check that there are no warps, scratches, bubbles, or dirt marks. Check that there are no loose, missing or incorrectly fastened screws. Check that the installation slots in the cabinet sub-rack are rectangular. Ensure that the guide bar has not been damaged and the fittings and auxiliary parts are intact. Check that the silk-screened images on the device are visible and intact. Installation Preparation Site Investigation Before installation, the installer should contact the project director to ensure that the site is suitable for installation. Details required include information about the installation site such as whether there is an iron tower or high mast nearby, the surrounding environmental conditions such as temperature and humidity, the power source, and so on. Installation staff should complete a site investigation with the project director before construction and conduct field observation of the installation site and the coverage area of the device, to confirm factors such as signal intensity, signal quality, the required coverage range, device location, antenna-
feeder system, and power supply system. Note: Only maintenance personnel or users who understand the reason for access and are experienced with restricted area access and understand the necessary preventive measures should access the installation site. Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 10 Mid POWER Digital Radio Installation Tools The following equipment and tools are required for a successful installation:
Electric percussion drill / Screwdriver / Wrench Torque Settings Type Specified Torques M3 0.6Nm M6 5Nm M10 50Nm Clearance You must ensure the following mounting clearances for mounting within a 19 rack/cabinet:
Convection cooling:
Maintain 3U clearance between the bottom of the device and any other. Maintain 3U clearance from the top surface of the device to the top of the rack. FAN Cooling:
You can mount the fan between the bottom of the device and any other. Maintain 2U clearance between the bottom of the device and any other. Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 11 Installing the Access Unit (AU) Mid POWER Digital Radio Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 12 Accessories List Mid POWER Digital Radio Rack Installation The Access Unit is a 19 1U equipment shelf. When installing the Access Unit in a rack, make sure the mechanical loading of the rack is even to avoid a hazardous condition. The rack should safely support the combined weight of all the equipment and be securely anchored. Installing the Access Unit in a climate-controlled room with sufficient air circulation is recommended as the maximum ambient temperature is +50C. To install the Access Unit in the equipment rack. 1. Attach the 19" mounting brackets at the front of the AU, using 4 screws M36 per bracket and the Phillips screwdriver. Observe the orientation of the brackets. Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 13 Mid POWER Digital Radio Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 14 2. Recommended attaching the sliding rails to rack. (Not included in delivery). Mid POWER Digital Radio Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 15 3. Place the AU in the rack and secure the AU using 2 screws M616 on both sides and the Phillips screwdriver. Mid POWER Digital Radio Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 16 Mid POWER Digital Radio 4. Install the fan for cooling if multiple AUs are installed in the same rack. It is necessary to allow at least 3 rack units (132mm) of free space below each unit for heat dissipation without fan installed or 1 rack unit (44mm) of free space below each unit with fan occupied in the middle. Otherwise, the device temperature may rise and affect the service life of the device. Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 17 5. 6. Connect and lock the power cable at the AU rear side. Connect and screw the ground wire at the AU rear side. Mid POWER Digital Radio Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 18 Mid POWER Digital Radio orientation of the brackets. Wall Installation To install the Access Unit on the wall:
1. Rotate the handles 90and attach them at the rear of the AU, using 4 screws M36 per bracket and the Phillips screwdriver. Observe the Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 19 2. Mark 4 x 6.8mm drilling holes sites for the hanger to be attached to the wall. 3. Drill 4 holes at the marked sites using percussion drill and embed 410 plastic expansion pipes. Note: H=70mm. Fasten the case with 4M6 expansion bolt. Mid POWER Digital Radio Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 20 4. 5. Connect and lock the power cable at the AU rear side Connect and screw the ground wire at the AU rear side Mid POWER Digital Radio Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 21 AU Mounting Dimension Spacing Mid POWER Digital Radio Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 22 Mid POWER Digital Radio RF Connection The RF interface between the Access Unit and the service provider signal source (or CrossFire CPOI) is provided by duplex connections on the Active Combiner module. To route and connect the coaxial cables to the Access Unit:
1. Obtain the required lengths of high performance, flexible, low loss 50 coaxial cable for all coaxial connections and route the cables from the signal source or CPOI to the Active Combiner module. 2. Connect the cables from the signal source to the QMA female connectors on the Active Combiner module on the back panel of the Access Unit. Note: Each Active Combiner module has four connectors to support up to four inputs. AU Rear Panel Interfaces SN Interface Name 1 2 3 4 5 6 Module 4 Duplexer Interface Module 3 Duplexer Interface Module 2 Duplexer Interface Module 1 Duplexer Interface Electric Power Line Interface Grounding Description QMA Female QMA Female QMA Female QMA Female
Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 23 Installing the Remote Unit (MP_PS) MP_PS Accessories Mid POWER Digital Radio Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 24 Wall Installation (Back on the Wall) 1. Attach and fasten the handle to the side of MP_PS with screws M614 using T5 Wrench. 2. Attach and fasten the Bracket I to the back of MP_PS with screws M614 using T5 Wrench. Mid POWER Digital Radio Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 25 Mid POWER Digital Radio 3. Mark the position of the drilling holes in the mounting Bracket II. Note: R=13mm. 4. Drill 4 holes at the marked positions. Note: H=70mm 5. Attach the dowels, expansion screws or the like and fasten the Bracket II to the wall. Tips: use Bracket II as a reference to control each devices separation distance before hanging and locking MP_PS u Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 26 6. Hang the MP_PS on the mounting bracket II and fasten with nuts M10. Mid POWER Digital Radio Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 27 7. Fasten the Bracket I and II with screws M614. Mid POWER Digital Radio Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 28 8. 9. Connect and lock the power cable Connect and screw the ground cable Mid POWER Digital Radio Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 29 10. Connect and tighten the waterproof network cable Mid POWER Digital Radio Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 30 11. Connect and tighten the waterproof optical fibre Mid POWER Digital Radio Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 31 Wall Installation (Side on the Wall) Mid POWER Digital Radio Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 32 1. Attach and fasten the handle to the side of MP_PS with screws M614 using T5 Wrench. 2. Attach and fasten the Bracket I to the left side of MP_PS with screws M614 using T5 Wrench. Mid POWER Digital Radio Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 33 Mid POWER Digital Radio 3. Mark the position of the drilling holes in the mounting Bracket II. Note: R=13mm. 4. Drill 4 holes at the marked positions. Note: H=70mm. 5. Attach the dowels, expansion screws or the like and fasten the Bracket II to the wall. Tips: use Bracket II as a reference to control each devices separation distance before hanging and locking MP_PS up. Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 34 6. Hang the MP_PS on the mounting bracket II and fasten with nuts M10. Mid POWER Digital Radio Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 35 7. Fasten the Bracket I and II with screws M614. Mid POWER Digital Radio Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 36 8. 9. Connect and lock the power cable Connect and screw the ground cable Mid POWER Digital Radio Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 37 MP_PS Wall Mounting Dimension Spacing Mid POWER Digital Radio Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 38 Mid POWER Digital Radio Pole Installation 1. 2. Install the handle and Bracket I to the back of MP_PS. Install the bracket II and Bracket III to the pole. 3. Hang the MP_PS on the mounting bracket and fasten with nuts M10. 4. Connect the ground cable and power cable. Note: The diameter of Pole shall not be over 110mm or less than 55mm. Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 39 Rack Installation Mid POWER Digital Radio Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 40 1. Attach and fasten the Bracket III to the Standard 19 Rack with screws Note: Please purchase Bracket III for rack installation separately. Mid POWER Digital Radio Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 41 2. Attach and fasten the handle to the side of MP_PS with screws M614 using T5 Wrench. 3. Attach and fasten the Bracket I to the back of MP_PS with screws M614 using T5 Wrench. Mid POWER Digital Radio Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 42 4. Hang the MP_PS on the mounting bracket and fasten with nuts M10. Mid POWER Digital Radio Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 43 5. 6. Connect the ground cable and power cable. Connect and screw the ground cable Mid POWER Digital Radio Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 44 MP_PS Wall Mounting Dimension Spacing Mid POWER Digital Radio Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 45 Mid POWER Digital Radio Optical Connection Optical Transceiver Module Single Port Bidirectional SFP Transceiver The Figure below shows a pair of single port Bidirectional SFP transceivers. For devices optical connection, the transceivers of two sides must be paired - the wavelength of one side is 1271nm, and the wavelength of another side is 1331nm. Otherwise it will fail the connection. All lower-level devices under this port wont be working in system. All the optical ports of all type devices have triangle LED indicators pointing to each port, which represents the synchronization status of the upper and lower optical modules. The indicator turns to green when optical modules are plugged in ports and synchronized. When connection is down, or there is no optical module in port, the indicator remains red. The single port SFP modules have to be used in pairs. Dual Port SFP Transceiver The optical connector unit includes an optical module and optical fibre. The Figure below shows that when using dual-port SFP module, the optical transmitter and optical receiver should correspond to each other. In other words, the optical transmitter of optical module A should correspond to the optical receiver of optical module B, and the receiver of A should correspond to the transmitter of B. The optical receiver and transmitter terminals of the optical module can be determined by the triangular mark on the optical module. The triangular mark in the yellow box and the red and blue lines indicate the optical fibre connections. Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 46 Mid POWER Digital Radio Optical Indicator Each pair (2) of optical module cages has four LED indicator arrows. The two on the left are green, and the two on the right are red as shown in Figure below. The indicator arrows represent the synchronization status of the upper and lower optical modules. When a pair of optical modules are synchronized (both uplink and downlink), the indicators turn green as shown in the right pair of indicators in Figure below. When the optical module is unplugged or not synchronized, the indicators are red as shown in the left pair of indicators. Check whether both indicators turn green after connecting one pair of optical modules. If the indicators are red, the terminal has not synchronized. Contact us today:
www.btiwireless.com sales@btiwireless.com BTI MP_PS_User Manual | 47
1 | Label | ID Label/Location Info | 320.08 KiB | August 25 2023 |
Integrated Distributed Antenna System Remote Unit MP-PS-OD-AC Model: PS-R222030708 Input: 100-240V~ 3A 50/60Hz Manufacturer: BTI Wireless 801571 Address: 11205 Knott Avenue - Suite A, Cypress, CA 90630 United States This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Serial: PS-R222030708BT XXXXXXXXXX MFG Date: DD-MM-YYYY XXXXXXXXXXXXXX CAN ICES(A)/NMB-3(A) FCC ID:WBKR2220708 Part90 and Part 20 Signal Booster THIS IS A 90.219 CLASS B DEVICE WARNING! This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC License to operate this device. You MUST register Part 90 Class B signal Boosters (as defined in 47 CFR 90.219) online at www.fcc.gov/signal-boosters /registration. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation.
1 | Attestation letter | Attestation Statements | 72.00 KiB | August 25 2023 |
BTI Wireless To:
SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: BTI Wireless, 11205 Knott Avenue Suite A, Cypress, CA 90630 United States For FCC ID: WBKR2220708; Model number: PS-R222030708 According to:
FCC KDB 935210 D02 Signal Boosters Certification v04r02 For PART 90 booster device, Section V (g) requirement:
(g) Attestation (must be non-confidential exhibit, signed by the applicant; signature by test lab, agent, or TCB is not acceptable) should include:
(1) Warning label messages and Class B disclosure will be also shown in online and point-of-sale marketing materials and on outside packaging of device:
For PART 20 booster device, IV.(d) requirement:
(d)) Attestation (must be non-confidential exhibit, signed by the applicant; signature by test lab, agent, or TCB is not acceptable) should include:
(1) Warning label messages will be also shown in online and point-of-sale marketing materials and on outside packaging of device We BTI Wireless Wireless declared our Warning label messages and Class B disclosure will be also shown in online and point-of-sale marketing materials and on outside packaging of device. WARNING: This is a part 20 and part 90 class B signal booster device. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. You MUST register Class B signal boosters (as defined in 47 CFR 90.219) online at www.fcc.gov/signal-boosters/registration. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation. Sincerely, Name (Printed): RonPoulin Title: VP of Business Development Signature:
On behalf of Company: BTI Wireless Telephone: (1) 760-712-3512 2020 BTI Incorporated. All Rights Reserved. BTI Restricted
1 | Auth Letter | Cover Letter(s) | 21.38 KiB | August 25 2023 |
BTI Wireless TO:
Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: WBKR2220708 To whom it may concern:
Date: 2023-08-21 We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with BTI Wireless This authorization is valid until further written notice from the applicant. Name (Printed): Ron Poulin Title: VP of Business Development Signature:
On behalf of Company: BTI Wireless Telephone: +1 250 882 8082
1 | FCC Change ID-Cover Letter 1 by orignal application | Cover Letter(s) | 25.54 KiB | August 25 2023 |
Sunwave Communications Co., Ltd Federal Communications Commission, Date: 2023-08-21 Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD. 21046 Attention: Equipment Authorization Branch CHANG IN IDENTIFICATION OF EQUIPMENT We, Sunwave Communications Co., Ltd, declare on our sole responsibility that BTI Wireless, may apply Change in FCC Identifier as established in 47CFR 2.933(b) for currently approved devices listed below. FCC ID: 2AEJ4R2220708 Regards, By:
Print name: Ren Ailin Title: Manager On behalf of: S Sunwave Communications Co., Ltd
(Company Name) Telephone: +86-571-88866999
1 | FCC Change ID-Cover Letter 2 by new application | Cover Letter(s) | 18.51 KiB | August 25 2023 |
BTI Wireless Federal Communications Comission, Date: 2023-08-21 Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD. 21046 Attention: Equipment Authorization Branch CHANG IN IDENTIFICATION OF EQUIPMENT We, BTI Wireless, request to apply for a new FCC ID as established in 47CFR 2.933(b) for a currently approved device. This application will establish a new FCC ID:
WBKR2220708 Per 2.933(b) 1. The original identification is FCC ID: 2AEJ4R2220708 2. The original grant date is 08/14/2023 3. The equipment is electrically identical. There is no change in design, circuitry or construction. 4. The original test results are applicable and representative of this changed device. 5. Exterior photographs are included in this application. External photos with label location and type label sample drawing are electronically submitted as attachments. Sincerely, By:
Print name: Ron Poulin Title: VP of Business Development On behalf of: BTI Wireless
(Company Name) Telephone: +12508828082
1 | FCC U.S. agent Letter | Attestation Statements | 76.83 KiB | August 25 2023 |
UNITED STATES DESIGNATED AGENT LETTER Date: 2023/8/21 TO:
Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant Company Name: BTI Wireless Grantee Code:
Contact Name:
WBK Ron Poulin Address:
11205 Knott Avenue Suite A, Cypress, CA 90630 United States City/Province/Zip: Cypress/ California/ 90630 Telephone:
Fax:
Email:
ron.poulin@btiwireless.com
+1 250 882 8082 U.S. designated agent Company Name: BTI Wireless Contact Name:
Address:
Ron Poulin 11205 Knott Avenue Suite A, Cypress, CA 90630 United States City/Province/Zip: Cypress/ California/ 90630 Telephone:
Fax:
Email:
+1 250 882 8082 ron.poulin@btiwireless.com Applicable Equipment: FCC ID: < WBKR2220708>
ATTN: Director of Certification:
We, < BTI Wireless > and < BTI Wireless > understand and acknowledge the applicants consent and the designated agents obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, < BTI Wireless > and < BTI Wireless > acknowledge the applicants acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name (Printed): Ron Poulin Name (Printed): Ron Poulin Title: VP of Business Development Signature:
Title: VP of Business Development Signature:
1 | QSF27-14-04 Rev1.0 Applicant Declaration Letter | Attestation Statements | 159.20 KiB | August 25 2023 |
SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name BTI Wireless Address Grantee Code FCC ID 11205 Knott Avenue Suite A, Cypress, CA 90630 United States WBK WBKR2220708 Authorized Contact Name Ron Poulin Contact Email Contact Phone ron.poulin@btiwireless.com
+1 250 882 8082 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;
a) b) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:
labeling the equipment with the exact FCC ID as specified in this application,
(1)
(2) compliance statement labeling pursuant to the applicable rules,
(3) compliance of the equipment with the applicable technical rules, c) d) e) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.
(1)
(2)
(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) g) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List
[BTI Wireless] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules.
[BTI Wireless] (the applicant) certifies that, as of the date of the filing of the application, the applicant [ is not] identified on the Covered list, established pursuant to 1.50002, as an entity producing covered equipment. Applicant Signature:
Date:2023-08-21 Print Name:
Ron Poulin Title:
VP of Business Development
*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2023-08-25 | 851 ~ 869 | B9B - Part 90 Class B Industrial Booster (non-SMR) | Change in identification of presently authorized equipment. Original FCC ID: 2AEJ4R2220708 Grant Date: 08/14/2023 |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2023-08-25
|
||||
1 | Applicant's complete, legal business name |
BTI Wireless
|
||||
1 | FCC Registration Number (FRN) |
0033462680
|
||||
1 | Physical Address |
11205 Knott Avenue - Suite A
|
||||
1 |
Cypress,, California 90630
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
U******@SGS.COM
|
||||
1 | TCB Scope |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
WBK
|
||||
1 | Equipment Product Code |
R2220708
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
R****** P********
|
||||
1 | Title |
VP of Business Development
|
||||
1 | Telephone Number |
760-7********
|
||||
1 | Fax Number |
714-2********
|
||||
1 |
r******@btiwireless.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd.
|
||||
1 | Name |
P****** Z******
|
||||
1 | Physical Address |
588 West Jindu Road, Xinqiao, Songjiang
|
||||
1 |
ShangHai, 201612
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
+8621********
|
||||
1 | Fax Number |
02161********
|
||||
1 |
P******@sgs.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd.
|
||||
1 | Name |
P******** Z****
|
||||
1 | Physical Address |
588 West Jindu Road, Xinqiao, Songjiang
|
||||
1 |
ShangHai, 201612
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
+8621********
|
||||
1 | Fax Number |
02161********
|
||||
1 |
P******@sgs.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | B9B - Part 90 Class B Industrial Booster (non-SMR) | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Remote Unit | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Change in identification of presently authorized equipment. Original FCC ID: 2AEJ4R2220708 Grant Date: 08/14/2023 | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Class B signal booster. In-Building DAS Industrial Booster. Power output listed is ERP. Antenna installed for each remote unit must provide a minimum 160cm separation distance from all persons as described in this filling. The antenna(s) used for the transmitter must be fixed-mounted on output permanent structures with maximum permissive gain of external antenna up to 0.1 dBi. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirement of 1.1307(b)(3). | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd.
|
||||
1 | Name |
K**** Z****
|
||||
1 | Telephone Number |
13636********
|
||||
1 |
K******@sgs.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 9 | PF | 758 | 775 | 3.06 | Amp | D1W | |||||||||||||||||||||||||||||||||
1 | 2 | 9 | 851 | 869 | 3.29 | Amp | D1W |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC