FCC ID: ZDL3430005ST4 3G Cellular Module

User Manual-Smart Tag 4 Installation Manual Version:

Date:

Page:

1.0 07-04-14 1 of 11 Date:

Version:

Smart Tag 4 Installation Manual 15-06-20 1.1 Owned by:

Brad Buike Head of Product Engineering Prepared by:

Brad Buike Head of Product Engineering Checked by:

Carlos Grangeia Business Development Director Approved by:

Charles Lewinton Production Test Engineer The material contained in this document may not be copied, published, transmitted, reproduced or disclosed, in whole or in part without the prior written permission of buddi Ltd. Talbot House, 17 Church Street, Rickmansworth, Hertfordshire WD3 1DE. buddi Ltd 2020 User Manual-Smart Tag 4 Installation Manual Version:

Date:

Page:

1.0 07-04-14 2 of 11 DOCUMENT HISTORY Version Date 1.0 1.1 07-04-20 15-06-20 Author B Buike B Buike Description First Release Up-date SAR value in Section 8. REFERENCED DOCUMENTS Document Name Version Date Ref. Talbot House, 17 Church Street, Rickmansworth, Hertfordshire WD3 1DE. buddi Ltd 2020 User Manual-Smart Tag 4 Installation Manual Version:

Date:

Page:

1.0 07-04-14 3 of 11 CONTENTS 7.1. Introduction ........................................................................................................... 4 1. Equipment Description .......................................................................................... 4 2. Smart Tag Fitting ................................................................................................... 5 3. Smart Tag Operation ............................................................................................. 6 4. Smart Tag Removal................................................................................................ 6 5. 6. On Body Charger (OBC) ......................................................................................... 7 Sanitization and Re-Use ........................................................................................ 8 7. Smart Tag ...................................................................................................... 8 7.1.1. Collection ................................................................................................... 8 7.1.2. Inspection .................................................................................................. 8 7.1.3. Cleaning ..................................................................................................... 8 Smart Tag Strap ............................................................................................. 9 7.2.1. Collection ................................................................................................... 9 7.2.2. Inspection .................................................................................................. 9 7.2.3. Cleaning ..................................................................................................... 9 7.3. OBC .............................................................................................................. 10 7.3.1. Collection ................................................................................................. 10 7.3.2. Inspection ................................................................................................ 10 7.3.3. Cleaning ................................................................................................... 10 FCC warning statement ....................................................................................... 11 IC Warning Statement ......................................................................................... 11 8. 9. 7.2. Talbot House, 17 Church Street, Rickmansworth, Hertfordshire WD3 1DE. buddi Ltd 2020 User Manual-Smart Tag 4 Installation Manual Version:

Date:

Page:

1.0 07-04-14 4 of 11 1. Introduction This document is intended to be the source reference material for using the Smart Tag V4 product, with the exception of electronic configuration (including set-up and interaction with the on-line monitoring portal). The emphasis here is upon describing the physical features, charging, correct fitting and removal etc. 2. Equipment Description A. On-Body Charger (OBC) Dock used to charge the On-Body Charger (OBC) battery. The OBC Dock is plugged into the mains and the OBC is clipped over it during charging. B. On-Body Charger (OBC) used to daily charge the Smart Tag battery. The OBC is clipped over the Smart Tag during charging. C. Smart Tag Strap for securing the Smart Tag to a subject. The strap is available in a number of sizes depending on the subjects ankle size. D. Smart Tag- Ankle worn electronic monitoring device. One is required per subject. E. Locking Plate- Two plastic Locking plates are required per Smart Tag. The locking plates will be damaged upon removal of the Strap, therefore new locking plates must be installed in the Smart Tag before it can be fitted to a new Subject. F. Removal Tool is used to release the strap and remove the Smart Tag from the subject. It punctures very small holes in a very controlled location on the Locking Plates and releases the strap. Not shown above. Talbot House, 17 Church Street, Rickmansworth, Hertfordshire WD3 1DE. buddi Ltd 2020 User Manual-Smart Tag 4 Installation Manual Version:

Date:

Page:

1.0 07-04-14 5 of 11 3. Smart Tag Fitting The Smart Tag should be prepared for fitting to the subject by clipping two new Locking Plates in position as shown below in red for clarity. The Locking Pates will be secured in position when the Strap is inserted into the Smart Tag, they protect the strap from being released without physical damage being created for evidence gathering purposes. Measure around the ankle, holding the measuring tape loosely. Record the measure in millimetres (mm). Using the strap sizing reference material select the strap size recommended for the subjects ankle measurement. Fit the Strap into the Smart Tag at one side, then wrap around the ankle of the subject ensuring the arrow on the front surface is pointing upwards, and connect the free end of the Strap into the Smart Tag. A clear click will be heard as the Strap securely engages inside the Smart Tag, it should be possible to slip two fingers behind the strap to ensure enough movement for cleaning, charging and general comfort. The fitting of the strap will create a closed optical circuit which is continuously monitored by the Smart Tag. Talbot House, 17 Church Street, Rickmansworth, Hertfordshire WD3 1DE. buddi Ltd 2020 User Manual-Smart Tag 4 Installation Manual Version:

Date:

Page:

1.0 07-04-14 6 of 11 4. Smart Tag Operation The Smart Tag communicates to a server-based monitoring platform, which interprets the data provided to populate a web portal user interface. The data sets include the following:

Event Time. GPS Location (Intervals can be defined, or a real-time request made). Geofence Data (Virtual zones for inclusion or exclusion set by map data). Position Type (GPS, RF Beacon). Speed of Motion. Battery Level. Charger On / Off. Signal Strength. Strap On / Off (Off includes tampering or cutting). Alerts (Based upon one or more of the above). Alerts can take the form of notifications within the web portal, by e-mail, SMS to mobile phone notifications or vibration feedback within the Smart Tag on the subject. When in proximity to an RF Beacon, the Smart Tag will not attempt to achieve new GPS fixes, resulting in significantly less demand on battery power. 5. Smart Tag Removal Note any obvious sign of damage to the Smart Tag, or Strap in accordance with local protocol. When removing the Smart Tag from a subject, protective gloves should be worn. Check that the locking plates are complete, correctly located and undamaged. If locking plates are damaged, follow local protocol which may include cutting the strap and retaining evidence if necessary. With no locking plate damage, use the removal tool to release the strap at one end. Using the release tool, engage the plastic jaws over the Smart Tag and begin to squeeze the handles together. The jaws will self-locate to the correct position and the release pins will puncture the Locking Plate, continue to squeeze until the Strap is released. Only one end of the Strap will be released, this is indicated by the red markers on the end of the release pins. Talbot House, 17 Church Street, Rickmansworth, Hertfordshire WD3 1DE. buddi Ltd 2020 User Manual-Smart Tag 4 Installation Manual Version:

Date:

Page:

1.0 07-04-14 7 of 11 6. On Body Charger (OBC) The OBC battery will require recharging at intervals consistent with the operating mode being used. It is intended that the OBC is connected to an OBC Dock when not in use, to charge up the device in preparation for connection to the Smart Tag, to fully charge the OBC it should be connected for at least 4 hours. The OBC is attached to the Smart Tag by clicking it over the unit. The Smart Tag can only be inserted in one orientation and as the OBC fits over it there is a click sound which indicates the correct fit. The status LED on the OBC provide the following information:

Status Battery flat LED None Charging OBC on dock Quick flashing green LED Charged OBC on dock Solid green LED Charged OBC ready to use (not on dock) Blink green LED OBC - charging Tag Fading in and out green LED OBC fully charged Tag Slow flashing green LED Talbot House, 17 Church Street, Rickmansworth, Hertfordshire WD3 1DE. buddi Ltd 2020 User Manual-Smart Tag 4 Installation Manual Version:

Date:

Page:

1.0 07-04-14 8 of 11 7. Sanitization and Re-Use 7.1. Smart Tag 7.1.1. Collection 7.1.2. Inspection The Smart Tag will be removed as per the removal process above. Place the Smart Tag and strap into a clean plastic bag and return them to the vehicle for inspection and cleaning. The Smart Tag should be inspected for signs of damage, units with damage should be dealt with in accordance with local protocols. Damage includes any significant surface marking which may be indicative of the unit being exposed to high impacts or tampering. Special care should be taken to ensure the following areas are inspected;

Any seam between plastic casings, damage here may indicate the sealing surfaces of the unit are damaged. The inside surfaces of the strap acceptance area. The unit should be returned for testing if there is any sign of wear in this area. 7.1.3. Cleaning If there is any heavy soiling or biological matter on the unit that is unlikely to be easily removed by a sanitising wipe, then the unit should be cleaned thoroughly in line with local protocol. To sanitise a Smart Tag in the field the following process should be followed;

Wear gloves. Using the removal tool, release the Smart Tag from the Strap and remove the locking plates. covering of alcohol. minute. Wrap the unit in an approved sanitising wipe. Rub the unit vigorously with the wipe ensuring all surfaces receive a good Wrap the unit in a new wipe and place in a sealed plastic bag for at least one Remove the unit from the bag, dispose of the wipe and allow the unit to dry in a well-ventilated area. The unit can then be returned to stock for re-use. Talbot House, 17 Church Street, Rickmansworth, Hertfordshire WD3 1DE. buddi Ltd 2020 User Manual-Smart Tag 4 Installation Manual Version:

Date:

Page:

1.0 07-04-14 9 of 11 7.2. Smart Tag Strap 7.2.1. Collection When handling the Strap protective gloves should be worn. The strap will be freed from the Smart Tag as part of the Smart Tag Removal process above. 7.2.2. Inspection The Strap should be inspected for signs of damage, straps with damage should be dealt with in accordance with local protocols. Damage includes any significant surface marking which may be indicative of the unit being exposed to high impacts or tampering. Special care should be taken to inspect the following areas;

The flexible strap material, both inner and outer most surfaces. All visible surfaces of plastic, particularly the join between the flexible and rigid sections. Damage in this area could be indicative of tampering and may adversely affect the future performance of the device. The tongue area that engages with the Smart Tag, particularly the locking clips. Damage or excessive wear in this area could affect the future performance of the device. Debris, soiling or damage to the optical end of the strap. 7.2.3. Cleaning If there is any heavy soiling or biological matter on the unit that is unlikely to be easily removed by a sanitising wipe, then the unit should be cleaned thoroughly in line with local protocol. To sanitise a Strap in the field the following process should be followed;

Wear gloves. Wrap the strap in an approved sanitising wipe. Rub the strap vigorously with the wipe ensuring all surfaces receive a good covering of alcohol. minute. Wrap the strap in a new wipe and place in a sealed plastic bag for at least one Remove the strap from the bag, dispose of the wipe and allow the strap to dry in a well-ventilated area. The strap can then be returned to stock for re-use. Talbot House, 17 Church Street, Rickmansworth, Hertfordshire WD3 1DE. buddi Ltd 2020 User Manual-Smart Tag 4 Installation Manual Version:

Date:

Page:

1.0 07-04-14 10 of 11 7.3. OBC 7.3.1. Collection 7.3.2. Inspection When collecting an OBC from a subject protective glove should be worn. Note any obvious sign of damage. Return the OBC to the vehicle for inspection and cleaning. The OBC should be inspected for signs of damage, units with damage should be dealt with in accordance with local protocols. Damage includes any significant surface marking which may be indicative of the unit being exposed to high impacts or tampering. Special care should be taken to inspect the following areas;

Any seams between plastics, check for loose fits or evidence of attack by screwdriver or similar. The clipping features that lock the unit closed over the Smart Tag. Any damage to these could affect the units future performance. The charging cable and jack connectors. Any damage to this could mean the The charging pins, any damage to these could mean the unit is not effective at unit is unable to be recharged. charging a Smart Tag. 7.3.3. Cleaning If there is any heavy soiling or biological matter on the unit that is unlikely to be easily removed by a sanitising wipe, then the unit should be cleaned thoroughly in line with local protocol. It should be noted that the OBC is only a splash proof product and therefore it is important not to fully immerse the unit in any liquid. To sanitise an OBC in the field the following process should be followed;

Wear gloves. Rub the unit vigorously with an approved sanitising wipe, ensuring all surfaces receive a good covering of alcohol. Allow to dry in a well-ventilated area. The unit can then be returned to stock for re-use. Talbot House, 17 Church Street, Rickmansworth, Hertfordshire WD3 1DE. buddi Ltd 2020 User Manual-Smart Tag 4 Installation Manual Version:

Date:

Page:

1.0 07-04-14 11 of 11 8. FCC warning statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. No changes shall be made to the equipment without the manufacturers permission as this may void the users authority to operate the equipment. This equipment has been tested for compliance with SAR limits for body worn configurations, the highest reported SAR value is 0.01W/kg for SAR extremity. 9. IC Warning Statement This device complies with ISEDs licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This equipment has been tested for compliance with SAR limits for body worn configurations, the highest reported SAR value is 0.01W/kg for SAR extremity. Ce dispositif est conforme la norme RSS exempte de licence de lISED. Lopration est soumise aux deux conditions suivantes : (1) ce dispositif peut ne pas causer dinterfrence, et (2) ce dispositif doit accepter toute interfrence, y compris les interfrences qui peuvent causer le fonctionnement indsirable de lappareil. Cet quipement a t test pour la conformit avec les limites SAR pour les configurations portes par le corps, la valeur SAR la plus leve dclare est de 0.01W/kg pour lextrmit SAR. Talbot House, 17 Church Street, Rickmansworth, Hertfordshire WD3 1DE. buddi Ltd 2020

Label Figure 1 Label position, on top of Module 3430005 FCC ID: ZDL3430005ST4 IC: 20371-3430005ST3G Figure 2 Label contents Tel: 0800 978 8800 www.buddi.co.uk Co. Reg. No. 05308826 buddi Ltd., Talbot House 17 Church Street, Rickmansworth Hertfordshire WD3 1DE Tel: 0800 978 8800 www.buddi.co.uk Co. Reg. No. 05308826 buddi Ltd., Talbot House 17 Church Street, Rickmansworth Hertfordshire WD3 1DE

bud 03/12/2020 Telecommunication Certification Body UL VS Ltd Unit 3, Horizon Wade Road Kingsland Business Park Basingstoke Hampshire RG24 8AH United Kingdom Subject: Authorisation Letter To whom it may concern This is to certify that Buddi limited hereby authorises UL VS Ltd. to act as the TCB for this C2PC application of the Cellular Module, FCC ID: ZDL3430005ST4 to the FCC. We certify that we are not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes. Yours faithfully, Po B Buike Head of Product Engineering Tel: 0800 978 8800 buddi Ltd., Talbot House www.buddi.co.uk 17 Church Street, Rickmansworth Co. Reg. No. 05308826 Hertfordshire WD3 1DE

bud 03/12/2020 Telecommunication Certification Body UL VS Ltd Unit 3, Horizon Wade Road Kingsland Business Park Basingstoke Hampshire RG24 8AH United Kingdom Subject: Class 2 Permissive Change (C2PC) Request FCC ID: ZDL3430005ST4 To whom it may concern In accordance with KDB 178919 DO1 and FCC rule part 2.1043: Changes in Certified Equipment, Buddi Ltd hereby requests a class 2 permissive change to Cellular Module FCC ID ZDL3430005ST4 as detailed below:

The module is being used outside of the initial grant conditions in a specific host product

(FCC ID: ZDLST4; Model: Smart Tag 4) that will be used in Portable usage scenarios. As a result of this, the module, in the host product, has undergone SAR testing to demonstrate compliance with FCC rule part 2.1093 as filed in this application. Yours faithfully, FA B Buike Head of Product Engineering Tel: 0800 978 8800 buddi Ltd., Talbot House www.buddi.co.uk 17 Church Street, Rickmansworth Co. Reg. No. 05308826 Hertfordshire WD3 1DE

budd March 12% 2020 Telecommunication Certification Body UL VS Ltd Units 1-3, Horizon Wade Road Kingsland Business Park Basingstoke Hampshire RG24 8AH United Kingdom Subject: Permanent Confidentiality Request Certification Application FCC ID: ZDL3430005ST4 To whom it may concern Pursuant to Sections 0.457(d) and 0.459 of CFR 47 , Buddi Ltd. request that the following information, provided to support the FCC application for the Cellular Module, FCC ID: ZDL3430005ST4 be held permanently confidential:

Operational Description Tune Up Procedure The above material contains trade secrets not customarily released to public that are judged to have the potential to cause detriment to the applicant and provide unjustified benefits to its competitors. This information should not be available for public disclosure for an indefinite period of time. Yours faithfully 3 n B Buike Head of Product Engineering Tel: 0800 978 8800 buddi Ltd., Talbot House www.buddi.co.uk 17 Church Street, Rickmansworth Co. Reg. No. 05308826 Hertfordshire WD3 1DE

buddi 09/27//2020 Telecommunication Certification Body UL VS Ltd Unit 3, Horizon Wade Road Kingsland Business Park Basingstoke Hampshire RG24 8AH United Kingdom Subject: Authorisation Letter To whom it may concern This is to certify that Buddi limited hereby authorises UL VS Ltd. to act as the TCB for the application of Smart Tag 4, FCC ID: ZDL3430005ST4 to the FCC. We certify that we are not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes. Yours faithfully, B Buike Head of Product Engineering Tel: 0800 978 8800 buddi Ltd., Talbot House www.buddi.co.uk 17 Church Street, Rickmansworth Co. Reg. No. 05308826 Hertfordshire WD3 1DE

buddi 02/27/2020 Telecommunication Certification Body UL VS Ltd Unit 3, Horizon Wade Road Kingsland Business Park Basingstoke Hampshire RG24 8AH United Kingdom Subject: Change in Identification Request New Manufacturer To whom it may concern This Change of Identification requested applies for a new FCC ID as established in FCC rule part 2.933(b) for a currently approved device. This application is by Buddi Ltd will establish a new FCC ID: ZDL3430005ST4 under ZDL for purpose of marketing. The original grant to ublox AG will remain in effect. Per FCC Rule Part 2.933(b):

1. The original identification is FCC ID: XPY1 CGM5NNN 2. The original grant date is 08/12/2016 3. The equipment is electrically identical. Only the model name, trade name and FCC ID number are different. 4. The original test results are applicable and representative of this changed device. 5. Exterior photographs are included in this application. The following files are electronically submitted as attachments:

> Cover Letter

> External Photos

> FCC ID label format and location Yours faithfully, SP B Buike Head of Product Engineering Tel: 0800 978 8800 buddi Ltd., Talbot House www.buddi.co.uk 17 Church Street, Rickmansworth Co. Reg. No. 05308826 Hertfordshire WD3 1DE

Doc id: UBX-20010550 WDIOX Certification Declaration Rev.: 10 Date: 27-Feb-2020 Change in FCC identification authorization letter lecuadhy = y-hlay AG Zurcherstrasse 68 CH-8800 Thalwil, Switzerland Phone: +41 44 722 74 44 Foy = 411147997047 Email: info@u-blox.com Addressed to: Telecommunication Certification Body ULVS Ltd Unit 3, Horizon Wace Road Kingsland Business Park Basingstoke Hampshire RG24 8AH United Kingdom Subject: Request for Change in FCC Identification - Original Manufacturer Authorization Model: SARA-U201 FCCID: XPYICGMSNNN Grant date: 08/12/2016 To Whom It May Concern, VAIL. . LIL... ARM ....... fi. bk... nn ey fT OR LT PAA TR VURAL JA AAR APRAIAIAL ULC WE, UTMIOA AY, ITGUlaG turer alld yrarllee UF QUE UeliUldl WOUUIe FUL TU APT IVOMONININ, Hereuy authorize representative of Buddi Limited (Talbot House, 17 Church Street, Rickmansworth, Hertfordshire WD3 1DE, United Kingdom) to apply to the FCC US for a change in identification as specified under 47CFR section 2.933 of the FCC rules, This authorization applies to the u-blox AG product:

Model name: SARA-U201 FCC ID: XPYICGMSNNN Grant date: 08/12/2016 We are aware that Buddi Limited intends to market the above referenced product inside their own product, under their own identification:

New FCC ID: ZDL3430005ST4 The original certification FCC ID XPYICGMSNNN will remain valid. Yours sincerely, Giulio Comar, Certification Manager, u-blox AG Anthar | Gitlin Camar Nanortmant: | cart Dana 1/4 Title ChangeinFCC identification authorization letter M102 Day | Copyright u-blox AG. All rights reserved Confidential