FCC ID: ZDLRF2 RF Beacon V3

RF Beacon V3 User Manual Version:

1.10 Date:

Page:

04-11-

202130-05-

14 1 of 7 RF Beacon V3 User Manual Date:

Version:

04-11-2021 1.0 Owned by:

Brad Buike Head of Product Engineering Prepared by:

Brad Buike Head of Product Engineering Checked by:

Francesco Mazzei Electronics Engineer Approved by:

Charles Lewinton CTO COMMERCIAL IN CONFIDENCE The material contained in this document may not be copied, published, transmitted, reproduced or disclosed, in whole or in part without the prior written permission of buddi Ltd. buddi Ltd 2021 Talbot House, 17 Church Street, Rickmansworth, Hertfordshire WD3 1DE. COMMERCIAL IN CONFIDENCE RF Beacon V3 User Manual Version:

1.10 Date:

Page:

04-11-

202130-05-

14 2 of 7 DOCUMENT HISTORY Version Date Author Description 1.0 04-11-2021 B Buike First Release REFERENCED DOCUMENTS Ref. Document Name Version Date COMMERCIAL IN CONFIDENCE The material contained in this document may not be copied, published, transmitted, reproduced or disclosed, in whole or in part without the prior written permission of buddi Ltd. buddi Ltd 2021 Talbot House, 17 Church Street, Rickmansworth, Hertfordshire WD3 1DE. COMMERCIAL IN CONFIDENCE RF Beacon V3 User Manual Version:

1.10 Date:

Page:

04-11-

202130-05-

14 3 of 7 CONTENTS 1. Introduction .................................................................................................................. 4 2. Equipment Description ................................................................................................. 4 3. RF Beacon V3 Installation ............................................................................................. 5 4. RF Beacon V3 Operation ............................................................................................... 5 5. RF Beacon V3 Collection / Inspection / Cleaning ......................................................... 6 Collection .............................................................................................................. 6 Inspection ............................................................................................................. 6 Cleaning ................................................................................................................ 6 FCC warning statement ................................................................................................. 7 5.1. 5.2. 5.3. 6. COMMERCIAL IN CONFIDENCE The material contained in this document may not be copied, published, transmitted, reproduced or disclosed, in whole or in part without the prior written permission of buddi Ltd. buddi Ltd 2021 Talbot House, 17 Church Street, Rickmansworth, Hertfordshire WD3 1DE. COMMERCIAL IN CONFIDENCE RF Beacon V3 User Manual 1. Introduction Version:

1.10 Date:

Page:

04-11-

202130-05-

14 4 of 7 This document is intended to be the source reference material for using the RF Beacon V3 product, with the exception of electronic configuration (including set-up and interaction with the Smart Tag and on-line monitoring portal). The emphasis here is upon describing the physical features, power source, and correct installation or removal. 2. Equipment Description The RF Beacon is a plug based device that is inserted into a fixed mains socket, to provide a location reference for the Smart Tag equipment. The device is available in different pin configurations to allow for direct connection to mains supply in the country of use, without the need for an adaptor. COMMERCIAL IN CONFIDENCE The material contained in this document may not be copied, published, transmitted, reproduced or disclosed, in whole or in part without the prior written permission of buddi Ltd. buddi Ltd 2021 Talbot House, 17 Church Street, Rickmansworth, Hertfordshire WD3 1DE. COMMERCIAL IN CONFIDENCE RF Beacon V3 User Manual Version:

1.10 Date:

Page:

04-11-

202130-05-

14 5 of 7 3. RF Beacon V3 Installation The RF Beacon V3 should be plugged into a fixed power socket in the home of the wearer. A red light on the end of the device will indicate that the unit is powered and working. The device will not require any servicing, control, adjustment or maintenance during the period of installation. Once installed it should remain in place for the duration of the wearers time with the Smart Tag. The RF Beacon V3 should not be installed in a place where it will be exposed to high temperatures, such as near an open flame or heat-emitting equipment. To avoid interference to nearby appliances, do not place RF Beacon V3 on or near a TV, microwave oven, or VCR. If the RF Beacon V3 does cause harmful interference to radio or television reception, increase the separation between the RF Beacon V3 and receiver. 4. RF Beacon V3 Operation The Smart Tag makes a wireless connection to an RF Beacon V3 when it is detected in proximity to the Smart Tag. Each RF Beacon V3 has its own unique ID, and the location of the subject residence is associated to that unique RF Beacon V3, as the RF Beacon V3 is not a GPS receiver in its own right. In this way the monitoring authority can be assured that the subject is at the home location at all times the Smart Tag is in range of the RF Beacon V3. When the subject is at home the Smart Tag would continue to seek GPS locations at the intervals set by the monitoring authority, the use of the RF Beacon V3 is intended to reduce the need for repeated GPS fixes while the subject is known to be at home, resulting in significantly less demand on battery power. The RF Beacon V3 does not have a battery back-up, therefore in cases of power interruption or deliberate disconnection location fixes by GPS will continue from the Smart Tag when it cannot see the RF Beacon V3. COMMERCIAL IN CONFIDENCE The material contained in this document may not be copied, published, transmitted, reproduced or disclosed, in whole or in part without the prior written permission of buddi Ltd. buddi Ltd 2021 Talbot House, 17 Church Street, Rickmansworth, Hertfordshire WD3 1DE. COMMERCIAL IN CONFIDENCE RF Beacon V3 User Manual Version:

1.10 Date:

Page:

04-11-

202130-05-

14 6 of 7 5. RF Beacon V3 Collection / Inspection / Cleaning 5.1. Collection When collecting an RF Beacon V3 from a subject, protective gloves should be worn. Note any obvious sign of damage. Return the RF Beacon V3 to the vehicle for inspection and cleaning. 5.2. Inspection The RF Beacon V3 should be inspected for signs of damage, units with damage should be dealt with in accordance with local protocols. Damage includes any significant surface marking which may be indicative of the unit being exposed to high impacts or tampering. Special care should be taken to inspect the following areas;

Any seams between plastics, check for loose fits or evidence of attack by screwdriver or similar. Pins for insertion into the mains electrical socket are undamaged. 5.3. Cleaning If there is any heavy soiling or biological matter on the unit that is unlikely to be easily removed by a sanitising wipe, then the unit should be cleaned thoroughly in line with local protocol. It should be noted that the RF Beacon V3 is only a splash proof product and therefore it is important not to fully immerse the unit in any liquid. To sanitise an RF Beacon V3 in the field the following process should be followed;

Wear gloves. Rub the unit vigorously with an approved sanitising wipe, ensuring all surfaces receive a good covering of alcohol. Allow to dry in a well-ventilated area. The unit can then be returned to stock for re-use. COMMERCIAL IN CONFIDENCE The material contained in this document may not be copied, published, transmitted, reproduced or disclosed, in whole or in part without the prior written permission of buddi Ltd. buddi Ltd 2021 Talbot House, 17 Church Street, Rickmansworth, Hertfordshire WD3 1DE. COMMERCIAL IN CONFIDENCE RF Beacon V3 User Manual Version:

1.10 Date:

Page:

04-11-

202130-05-

14 7 of 7 6. FCC warning statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. COMMERCIAL IN CONFIDENCE The material contained in this document may not be copied, published, transmitted, reproduced or disclosed, in whole or in part without the prior written permission of buddi Ltd. buddi Ltd 2021 Talbot House, 17 Church Street, Rickmansworth, Hertfordshire WD3 1DE. COMMERCIAL IN CONFIDENCE RF Beacon V3 User Manual 7. IC Warning Version:

1.10 Date:

Page:

04-11-

202130-05-

14 8 of 7 This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference, and

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement COMMERCIAL IN CONFIDENCE The material contained in this document may not be copied, published, transmitted, reproduced or disclosed, in whole or in part without the prior written permission of buddi Ltd. buddi Ltd 2021 Talbot House, 17 Church Street, Rickmansworth, Hertfordshire WD3 1DE. COMMERCIAL IN CONFIDENCE

Buddi Limited Agent Authorization Company: Buddi Limited Address: Talbot House, 17 Church Street, Rickmansworth, United Kingdom, WD3 1DE Product Name: RF Beacon V3 Model Number(s): T5-STR-PTB-915, Colorado Product Description: RF Beacon V3 FCC ID: ZDLRF2 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Jiankuai Li Title:

PM Company: Shenzhen STS Test Services Co., Ltd. Date: 2021.12.09

Differences Description We Buddi Limited state:

Product RF Beacon V3 Model Name T5-STR-PTB-915, Colorado Trade Name: Buddi Ltd FCC ID: ZDLRF2 The electrical circuit design, layout, components used and internal wiring for above models are identical, Only difference in model name. Signatory Date 2021.12.09 Signature Name: Jiankuai Li Title: PM Company: Shenzhen STS Test Services Co., Ltd.

2021.11.26 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern:

We, the undersigned, hereby authorize SHENZHEN STS TEST SERVICES CO.,LTD./ A 1/F, Building B, Zhuoke Science Park, No.190 Chongqing Road, HepingShequ, Fuyong Sub-District,Baoan District, Shenzhen, Guang Dong, China/Jiankuai Li(Name of Agent company name and address, Name of Agent) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. Name: Jiankuai Li Title: PM E-mail:Jiankuai.li@stsapp.com This appointment is valid until further until Nov 23, 2022 Sincerely, Name: Brad Buike Title: Head of Product Engineering E-mail: brad.buike@buddi.co.uk Company: Buddi Limited Signature:

Tel: 0800 978 8800 www.buddi.co.uk Co. Reg. No. 05308826 buddi Ltd., Talbot House 17 Church Street, Rickmansworth Hertfordshire WD3 1DE

Buddi Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2021.12.09 Subject; Request for Confidentiality FCC ID: ZDLRF2 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Tune-up Procedure Part List SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Jiankuai Li Title: PM