all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User Manual | Users Manual | 3.03 MiB | December 09 2012 / September 03 2013 | |||
1 2 | Cover Letter(s) | |||||||
1 2 | Test Report | |||||||
1 2 | External Photos | December 09 2012 / September 03 2013 | ||||||
1 2 | Internal Photos | December 09 2012 / September 03 2013 | ||||||
1 2 | ID Label/Location Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Test Setup Photos | December 09 2012 / September 03 2013 | ||||||
1 2 | RF Exposure Info | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Test Report |
1 2 | User Manual | Users Manual | 3.03 MiB | December 09 2012 / September 03 2013 |
User Manual 11n/a & 11n/g/b Concurrent Smart model WAPS-APG600H 11n/a, 11n/g/b Single Smart model WAPS-AG300H www.buffalotech.com Contents Chapter 1 - Product Overview .........................................3 Package Contents .....................................................................3 Hardware Overview ..................................................................4 Front Panel LEDs ........................................................................... 4 Back Panel ..................................................................................... 6 Chapter 2 - Placing Your AirStation ................................8 Antenna Placement ...................................................................8 Installation .................................................................................8 Connecting Power Sourcing Equipment (Sold Separately) ........... 8 Connecting the AC Adapter (Sold Separately) ............................... 10 Initial Setup ...............................................................................11 Installing the AirStation Configuration Tool .................................... 11 Setting the AirStation IP Address ................................................... 12 Accessing the Web-based Configuration Interface ........................ 14 Enabling the Wireless LAN Functions and Making the Encryption Settings ........................................................................ 16 Setting the Password in the Configuration Interface ...................... 18 Mounting to a Ceiling or Wall ....................................................20 Mounting the Security Case (Sold Separately) .........................22 Removing the AirStation ...........................................................24 Chapter 3 - Connect to a Wireless Network ...................25 Automatic Secure Setup (AOSS/WPS) .....................................25 Windows 7/Vista (Client Manager V) ............................................. 26 Windows XP (Client Manager 3) .................................................... 27 Mac OS X (AOSS Assistant) .......................................................... 28
- 1 -
Manual Setup ............................................................................29 Windows 7 (WLAN AutoConfig) ..................................................... 29 Windows Vista (WLAN AutoConfig) ............................................... 30 Windows XP (Wireless Zero Configuration) ................................... 33 Mac OS X (Wi-Fi) ........................................................................... 34 Chapter 4 - Checking Wireless Signal Quality ...............35 Chapter 5 - Default Configuration Settings ....................38 Appendix A - Specifications ............................................43 Appendix B - TCP/IP Settings ..........................................45 Windows 7 ................................................................................45 Windows Vista ...........................................................................46 Windows XP ..............................................................................47 Mac OS X ..................................................................................48 Appendix C - Restoring the Default Configuration .......49 Appendix D - Regulatory Compliance Information .......50 Appendix E - Environmental Information .......................56 Appendix F - GPL Information .........................................57
- 2 -
Chapter 1 - Product Overview Package Contents The following items are included in your AirStation package. If any of the items are missing, please contact your vender. Wireless LAN access point ........................................................................................................ 1 Antennas (Dual band 2.4 GHz / 5 GHz) ............................................................................... 2 Antenna cap (already attached to antenna) ..................................................................... 2 Wall-mounting fixture ............................................................................................................... 1 Ceiling-mounting wooden screws (large) .......................................................................... 4 Wall-mounting wooden screws (medium) ........................................................................ 4 Wall-mounting anchor (for medium-size wooden screws).......................................... 4 Screws (Small: Length 5 mm *) ............................................................................................... 2 Screws (Small: Length 4 mm *) ............................................................................................... 4 Spacers (Ring-shaped metal part) ......................................................................................... 2 Ejector (L-shaped part) .............................................................................................................. 1 AirNavigator CD ........................................................................................................................... 1 Serial number sticker ................................................................................................................. 2 Quick Setup Guide ...................................................................................................................... 1 Warranty Statement ................................................................................................................... 1
The length here refers to the length of the section shown in the figure. An AC adapter is not included with this AirStation unit, and so please order an AC adapter
(WLE-OP-AC12, sold separately) or use separate PoE-enabled power sourcing equipment.
- 3 -
Chapter 1 Product Overview Hardware Overview Front Panel LEDs 1 2 3 4 5 6 1 Power LED On:
Off:
2 Diag LED (Red) Power is on. Power is off. This LED is off when the LED setting is set to Off. This indicates the status of this unit depending on the number of blinks per cycle. Note: When the unit is first turned on or restarted, the Diag LED will blink for almost a minute during boot. This is normal. Nomal. RAM error. Flash ROM error. Off:
Solid red at startup
(about 2 to 3 minutes):
Blinks red twice at startup or immediately after settings are saved:
- 4 -
Chapter 1 Product Overview 3 blinks*2:
4 blinks*2:
5 blinks:
9 blinks*2:
Continuously blinking*1:
Wired Ethernet LAN error. Wireless LAN error. USB error. System error. Updating firmware, saving settings, or initializing settings.
*1 Never unplug the AC adapter while the Diag LED is blinking continuously.
*2 Turn off AirStation first, wait for a few seconds, then turn it back on. 3 5 GHz LED (Blue) 5 GHz wireless LAN is enabled. On:
Randomly blinking: 5 GHz wireless LAN is transmitting. 2 blinks:
Continuously blinking:
Note: This LED is off when LED Setting is set to Off. The default setting is Off (Disable). Enable the wireless AirStation is waiting for an AOSS or WPS security key. AOSS/WPS error; failed to exchange security keys. function by referring to Enabling the Wireless LAN Functions and Making the Encryption Settings (page16). 4 2.4 GHz LED (Green) 2.4 GHz wireless LAN is enabled. On:
Randomly blinking: 2.4 GHz wireless LAN is transmitting. 2 blinks:
Continuously blinking:
Note: This LED is off when LED Setting is set to Off. The default setting is Off (Disable). Enable the wireless AirStation is waiting for an AOSS or WPS security key. AOSS/WPS error; failed to exchange security keys. function by referring to Enabling the Wireless LAN Functions and Making the Encryption Settings (page16). 5 LAN LED (Green) On:
Blinking:
An Ethernet device is connected. An Ethernet device is communicating. 6 Antenna Connector Screw on the included antennas here. Note: The supplied antenna supports both the 2.4 GHz and 5 GHz bands.
- 5 -
Chapter 1 Product Overview Back Panel 10 12 16 7 8 9 11 13 14 15 17 7 DC Connector 8 Power button 9 LAN Port 10 Function expansion USB port 11 USB Port 12 USB Eject Button The AC adapter (WLE-OP-AC12, sold separately) is connected here. This button turns the power on and off . The AirStation LAN port is connected to a computer, hub, or other network device using a LAN cable. Because the AirStation LAN port supports AUTO-MDIX, it can be connected to a network device regardless of the LAN cable type (straight or cross). LAN port 1 supports PoE devices. If PoE-enabled power sourcing equipment (sold separately) is connected, power can be received from the LAN cable so that an AC adapter does not need to be connected. For details on PoE, see the manual for your power sourcing equipment (sold separately). This is a USB port for function expansion. It cannot be used with the current fi rmware version. A USB memory device (sold separately) is connected here. When a USB memory device is connected, you can start the AirStation using a specifi c fi rmware version and save log information. Press this button when removing the USB memory device from the AirStation. Holding down the button for three seconds or longer will perform the disconnection process, which disables access from the AirStation to the USB memory device for enabling safe removal of the USB memory device. Be sure to always press this button and check that the USB LED is blinking before removing the USB memory device. If the USB memory device is removed while it is being accessed, the data could become corrupted, or the device could be damaged.
- 6 -
Chapter 1 Product Overview 13 USB LED (Green) On:
Randomly blinking: USB memory device can be removed. USB memory device is being used. 14 RJ-45 serial console port for settings This is an RJ-45 serial console port for settings. This cannot be used in the current firmware version. 15 Reset Button To reset all settings, hold down this button until the Diag LED comes on
(about 3 seconds). Power must be on. 16 AOSS/WPS button Pressing this button until the 5 GHz LED / 2.4 GHz LED flashes twice
(about 1 second) will change to the AOSS or WPS connection standby status. 17 Maintenance port This cannot be used in the AirStation.
- 7 -
Chapter 2 - Placing Your AirStation Antenna Placement Remove the antenna cap, and attach the supplied antenna here. The antenna connector can be easily damaged, and so be careful not to touch it. Note: The supplied antenna supports both the 2.4 GHz and 5 GHz bands. Installation Connecting Power Sourcing Equipment (Sold Separately) If PoE (Power over Ethernet) enabled power sourcing equipment (sold separately) is used to provide power to the AirStation, perform the procedure below to connect the power sourcing equipment. Notes:
Power sourcing equipment can be connected to the LAN 1 port only. The LAN 2 port does not support PoE, and so do not connect power sourcing equipment to this port. Doing so could cause a breakdown of the device. PoE is a function compliant with the IEEE802.3af or IEEE802.3at standards, and it enables data signal transmission and powering of devices over a single LAN cable. A device with a PoE function can be used without connecting a power cable by simply connecting it to an AirStation with a LAN cable. If power is supplied using PoE, do not connect an AC adapter. Some power sourcing equipment may be unable to supply power to the AirStation depending on its specifications. Be sure to always use power sourcing equipment that is compatible with the AirStation.
- 8 -
Chapter 2 Placing Your AirStation 1 Use a LAN cable to connect the PoE port of the power sourcing equipment to the LAN 1 port of the AirStation. 2 3 Note: Be sure that the cable connecting the AirStation and power sourcing equipment is an enhanced Category 5 or higher 4-pair cable. Turn on the AirStation power. Check that the Power LED is on. If the Power LED does not turn on even after several minutes have elapsed, check that the LAN cable is connected correctly, the AirStation power is turned on, and that the power sourcing equipment is turned on.
- 9 -
Chapter 2 Placing Your AirStation Connecting the AC Adapter (Sold Separately) If the AC adapter (WLE-OP-AC12, sold separately) is used to supply power to the AirStation, perform the procedure below to connect the AC adapter. 1 2 3 4 Connect the AC adapter and AC cable. Insert the AC adapter plug into the DC connector of the AirStation. Turn on the AirStation power. Check that the Power LED is on. If the Power LED does not turn on even after several minutes have elapsed, check that the AC adapter is connected correctly and that the AirStation power is turned on.
- 10 -
Chapter 2 Placing Your AirStation Initial Setup The AirStation configuration interface can be opened for making the default settings. The AirStation Configuration Tool is used to open the setting screen. Install the AirStation Configuration Tool on your computer, and then open the AirStation configuration interface. Note: The computer that opens the setting screen must be a Windows computer with Internet Explorer 8.0 or later installed. Installing the AirStation Configuration Tool 1 2 3 Boot your computer and insert the AirNavigator CD. The setup wizard will launch automatically. Note:
If the setup wizard is not displayed, double-click [My Computer] > CD-ROM drive icon > [AirNavi.exe]. Click [Options]. Click [Advanced Installation].
- 11 -
Chapter 2 Placing Your AirStation 4 5 Check the box for Install AirStation Configuration Tool and click [Install]. Install by following the on-screen instructions. Setting the AirStation IP Address 1 2 3 Start the AirStation Configuration Tool. Click [Start] > [All Programs]> [BUFFALO] > [AirStation Utility] > [AirStation Configuration Tool] to launch it. Click [Next]. Highlight an AirStation to configure and click [Next].
- 12 -
Chapter 2 Placing Your AirStation 4 5 6 Click [Configure this AirStation IP Address]. Check Obtain IP address from DHCP server to have DHCP obtain an IP address automatically, or you may enter IP address settings manually. Click [Next]. Enter the AirStation administrator password (the default setting is password), and click
[Next]. Note:
If the AirStation administrator password is 9 characters or more, the IP address of the AirStation cannot be changed using this procedure. In this case, open the AirStation setting screen, and set the IP address.
- 13 -
Chapter 2 Placing Your AirStation 7 Click [Finish]. Accessing the Web-based Configuration Interface 1 2 Start the AirStation Configuration Tool. Click [Start] > [All Programs]> [BUFFALO] > [AirStation Utility] > [AirStation Configuration Tool] to launch it. Click [Next].
- 14 -
Chapter 2 Placing Your AirStation 3 Highlight an AirStation to configure and click [Next]. 4 Click [Open Web Setting screen.]. 5 Click [OK].
- 15 -
Chapter 2 Placing Your AirStation 6 7 When the login screen is displayed, enter admin for the user name, and enter password for the password, and then click [OK]. The AirStation Configuration Interface is displayed. Enabling the Wireless LAN Functions and Making the Encryption Set-
tings In the AirStation default state, all of the wireless LAN functions are disabled. To enable the wireless LAN functions and make the encryption settings, use the procedure below to change the settings. Note: The example in the procedure below is described when using WPA2-PSK AES for encryption. 1 Open the AirStation Configuration interface. 2 Click Wireless Encryption(WEP/TKIP/AES).
- 16 -
Chapter 2 Placing Your AirStation 3 4 5 For the WAPS-APG600H, select 11a & 11g interfaces. For the WAPS-AG300H, select 11g interface or 11a interface. Select the Security Mode (example: WPA-PSK). Select WPA2 Only for the WPA Type, and select AES for the encryption system, set the Pre-
Shared Key, and click [Apply].
- 17 -
Chapter 2 Placing Your AirStation Setting the Password in the Configuration Interface A user name and password must be entered to log into the configuration interface. If you log into the configuration interface using the administrator name and password, you are provided with privileges for reading and writing all setting parameters and statistical information. The default administrator name is admin, and the default administrator password is password. To prevent logging in by an unauthorized third party, once the initial setup of the AirStation is completed, be sure to change the administrator password and user password settings. 1 2 Open the AirStation configuration interface. Click Advanced.
- 18 -
Chapter 2 Placing Your AirStation 3 4 From the left-side menu, click Admin Config > Name / Password. Enter a new password for the administrator password and user password (Enter the same password again in the Confirm fields.), then click [Apply]. Notes:
For the administrator password, enter a character string of 6 to 32 characters consisting of single-byte alphanumeric characters and symbols. For the user password, enter a character string of 6 to 32 characters consisting of single-byte alphanumeric characters and symbols. When setting the passwords, enter both the administrator password and user password. If one of these passwords is blank, the passwords cannot be set. If you log in using the administrator name, all AirStation setting items can be changed. If you log in using a user name, you can view all the AirStation setting values, but you cannot change them.
- 19 -
Chapter 2 Placing Your AirStation Mounting to a Ceiling or Wall The AirStation can be mounted to a ceiling or wall. Pay careful attention to the following points when mounting. Notes:
Mount in a location with an ambient temperature range from 0 C to 45 C, humidity from 10 % to 90 %, and no condensation. Do not bring the AirStation into close contact with other devices, other walls, or other objects. Do not mount on wobbly surfaces, slanted surfaces, or other unstable locations. Do not mount in locations that are exposed to large amounts of direct sunlight, heat sources, or electromagnetic waves. Mount in a firm and stable position. If the AirStation is not properly mounted, it can fall and cause an accident. Use the supplied accessories below to mount the AirStation to the ceiling or wall. Ceiling-mounting wooden screws (large) Wall-mounting wooden screws (medium) Note: The ceiling where the AirStation is secured must be capable of supporting a weight of at least 1.5 kg. If the ceiling does not have sufficient strength, be sure to reinforce the ceiling before securing the AirStation to it. If the ceiling is not reinforced, the AirStation can fall and cause an injury. Ceiling reinforcement Ceiling rear Ceiling Square blocks (30 mm block) e r o m r o m m 0 3 Wall-mounting fixture Supplied wooden screws
(large) s s e l r o m m 0 2 If the ceiling is made from plaster board or other material that does not provide enough strength, be sure to reinforce the ceiling before mounting the AirStation. The gure above shows an example when using the supplied wooden screws (large) for attaching the wall-mounting xture. The thickness and size of the reinforcement piece varies depending on the screw size that you use. For details, please consult with a specialized contractor with building experience or the dealer where you made the purchase. If the screws cannot be properly secured to the wall, such as when the wall material is thin, open holes in the wall beforehand, embed the wall-mounting anchor into the wall, and then secure with the screws.
- 20 -
Chapter 2 Placing Your AirStation 1 Use the four wooden screws to secure the wall-mounting fixture. Note: For certain usage environments, you may be able to use items other than the supplied screws. Select the most suitable item for use on your mounting surface. Secure the screws. Front Secure the screws. Rear (wall side) If mounting to a wall, secure so that this section is on the bottom. 2 As shown in the figure, insert the AirStation so that it clicks into place, and then secure it in place on the wall-mounting fixture.
- 21 -
Chapter 2 Placing Your AirStation Mounting the Security Case (Sold Separately) 1 Use the four wooden screws to secure the fixture to the wall or ceiling. Secure the screws. Secure the screws. If mounting to a wall, secure so that this section is on the bottom. 2 As shown in the figure, insert the AirStation so that it clicks into place, and then secure it on the wall-mounting fixture.
- 22 -
Chapter 2 Placing Your AirStation 3 4 Insert the key into the cover, and turn to the OPEN position. As shown in the figure, attach the cover while it is slanted. 5 Turn the key to the CLOSE position, and then remove it.
- 23 -
Chapter 2 Placing Your AirStation Removing the AirStation To remove the AirStation from the fixture, perform the procedure below. Ejector Insert the supplied ejector into the position shown in the figure so that the clips of the AirStation are raised, and then apply force in the direction of the arrow to remove. If the AirStation is still difficult to remove using this procedure, turn the ejector by about 45 degrees so that the clips on the AirStation are raised, and then apply force in the direction of the arrow to remove.
- 24 -
Chapter 3 - Connect to a Wireless Network Automatic Secure Setup (AOSS/WPS) AOSS and WPS are systems that let you automatically configure wireless LAN settings. Just pressing the buttons will connect wireless devices and complete security settings. Easily connect to wireless devices or computers which support AOSS or WPS. AOSS (AirStation One-Touch Secure System) was developed by Buffalo Technology. WPS was created by the Wi-Fi Alliance. Internet PUSH PUSH Router AirStation PC or Portable Devices
(AOSS Devices) Before using AOSS/WPS to connect to a Buffalo wireless client, install Client Manager software from the included AirNavigator CD. Consult your wireless clients documentation for more information. Buffalos Client Manager software can be used with the wireless LAN devices built into most computers. However, it is not guaranteed to work with all wireless LAN devices available. Some wireless clients may require manual setup.
- 25 -
Chapter 3 Connect to a Wireless Network Windows 7/Vista (Client Manager V) If you are using Windows 7 or Vista, use the included Client Manager V software to connect wirelessly with AOSS/WPS. 1 2 3 4 Click [Start] > [All Programs] > [BUFFALO] > [AirStation Utility] > [Client Manager V]. Click [Create Profi le]. If the User Account Control screen opens, click [Yes] or [Continue]. Click the [WPS AOSS ] button. Follow any instructions displayed on the screen. When the 2.4 GHz and 5 GHz LEDs on the front of the AirStation stop fl ashing and is lit steadily, the connection is complete.
- 26 -
Chapter 3 Connect to a Wireless Network Windows XP (Client Manager 3) If you are using Windows XP, use Client Manager 3 to connect wirelessly with AOSS/WPS. Right click on the icon in the system tray and select [Profi le]. 1 2 Click the [WPS AOSS] button. It will take several seconds for your wireless connection to be confi gured. When the 2.4 GHz and 5 GHz LEDs on the front of the AirStation stop fl ashing and glow steadily, the connection is complete.
- 27 -
Chapter 3 Connect to a Wireless Network Mac OS X (AOSS Assistant) If you are using Mac OS X 10.7 / 10.6 / 10.5 / 10.4, use the included AOSS Assistant software to connect wirelessly with AOSS. 1 2 3 4 5 6 Load the AirNavigator CD in your Mac. From the menu bar, click [Go] > [Computer]. Double-click the CD icon, and then double-click [AOSS Assistant] in the Mac folder. The software license screen is displayed. Click [Agree] to proceed. Click [Start AOSS ]. Enter the Macs username and password and click [OK]. It will take several seconds for your wireless connection to be configured. When the 2.4 GHz and 5 GHz LEDs on the front of the AirStation stop flashing and glow steadily, the connection is complete.
- 28 -
Chapter 3 Connect to a Wireless Network Manual Setup You can also connect to the AirStation without installing Client Manager V or Client Manager 3 by using the utility built-in to Windows. The procedure varies depending on which version of Windows you are using. Windows 7 (WLAN AutoConfig) With Windows 7, use WLAN AutoConfig to connect to the AirStation. 1 2 Click on the network icon in the system tray. Select the target AirStation and click
[Connect]. If you will be connecting to this device in the future, checking [Connect automatically] is recommended.
- 29 -
Chapter 3 Connect to a Wireless Network 3 Enter the encryption key and click [OK]. Windows Vista (WLAN AutoConfig) With Vista, use WLAN AutoConfig to connect to the AirStation. 1 2 3 Right click on the wireless network icon in the system tray. Click [Connect to a network]. When this screen is displayed, select your network and click [Connect].
- 30 -
Chapter 3 Connect to a Wireless Network If the screen below is displayed, click [I want to enter the network key or passphrase instead]. Otherwise,go to step4.
- 31 -
Chapter 3 Connect to a Wireless Network 4 Enter the encryption key and click [Connect]. Step through the wizard to finish configuration. If the Set Network Location screen is displayed, select [Home], [Work], or [Public location] depending on where youre using the AirStation.
- 32 -
Chapter 3 Connect to a Wireless Network Windows XP (Wireless Zero Configuration) Windows XP includes Wireless Zero Config, a built-in utility to connect to your AirStation. Note:
If Client Manager 3 is installed on your computer, Wireless Zero Config is disabled. Uninstall Client Manager 3 to use Wireless Zero Config, or just use Client Manager 3 to connect to the AirStation. 1 2 3 4 Right click on the wireless network icon in the system tray. Click [View Available Wireless Networks]. Select the network to connect to and click
[Connect]. Enter the encryption key (twice) and click
[Connect]. It will take several seconds for configuration to complete.
- 33 -
Chapter 3 Connect to a Wireless Network Mac OS X (Wi-Fi) Use Wi-Fi on a Mac to connect to the AirStation. Note:
In Mac OS X 10.6 and earlier, Wi-Fi appears as AirPort. 1 2 3 It will take several seconds for configuration to complete.
- 34 -
icon in the top Click the section of the screen and select
[Turn Wi-Fi On]. Find the AirStations SSID on the list. Click it to highlight it. Enter the KEY into the Password entry box, check [Remember this network], and click [OK]. Chapter 4 - Checking Wireless Signal Quality For users of Windows 7, Vista, or Mac OS X (10.4 and later), software supplied with the AirStation can be used to check the quality and strength of the wireless signal. Windows 7/Vista Note:
If Client Manager V is not already installed, install it from the AirNavigator CD. Client Manager V does not support Windows XP. Click the icon in the system tray. Click [Advanced Setup]. 1 2 3 When the Client Manager V status screen is displayed, click .
- 35 -
Chapter 4 Checking the Wireless Signal Quality and Strength 4 Parameter Connection status Usage status by channel Meaning Signal strength (dBm), link speed (Mbps), and signal quality (%) are displayed in one-minute intervals on a real-time graph. The 11b/11g display shows usage in the 2.4 GHz band channels 1 to 14. The 11a display shows usage in the W52, W53, and W56 channels. Colors are used to indicate the signal strength of the access point. Colors closer to red indicate an access point with a stronger signal strength, and colors closer to blue indicate an access point with a weaker signal strength. Mac 1 2 3 Load the AirNavigator CD into your Mac. From the menu bar, click [Go] > [Computer]. Double-click the CD icon, and then double-click [WLAN Monitor] in the Mac folder.
- 36 -
Chapter 4 Checking the Wireless Signal Quality and Strength The software license screen is displayed when starting for the first time only. Click [Agree] to proceed. 4 5 Parameter Meaning Network name (SSID) This displays the SSID of the AirStation that is currently connected. Status IP Address Security Encryption Band Channel This indicates the current connection status. This indicates the IP address of the current wireless network port
(Wi-Fi). This indicates the authentication method for the current connection target. This displays the encryption type for the current connection target. This displays the wireless band for the current connection target. This displays the wireless channel for the current connection target. Link Speed (Mbps) This displays the current link speed. Quality (%) This displays the current signal quality. Signal Level (dBm) This indicates the strength of the current signal.
- 37 -
Chapter 5 - Default Configuration Settings Feature LAN IP address LAN Port Parameter IP Assignment IP Address IP Subnet Mask Default Gateway Primary Address Wired Port (#1) Wired Port (#2) VLAN Config Interface VLAN AOSS WPS Basic Management VLAN AOSS Button on the AirStation Unit Authentication method for WEP Authentication method for TKIP VLAN WPS Radio Band Enable SSID SSID 1 Default Setting DHCP Client Assigned by an external DHCP server Assigned by an external DHCP server Assigned by an external DHCP server Assigned by an external DHCP server Enabled Media Type MDI Flow Control : Enabled 802.3az
: Enabled Wired Port (#1) / Wired Port (#2) VLAN mode : Untagged Port VLAN ID VLAN ID Enabled
: Auto
: Auto
: 1
: 1 802.11g : AOSS is not active 802.11a : AOSS is not active 802.11g : AOSS is not active 802.11a : AOSS is not active 802.11g (AES/TKIP) : 1 802.11g (WEP)
: 1 802.11a (AES/TKIP) : 1 802.11a (WEP)
: 1 Disabled 802.11g : Disabled 802.11a : Disabled 802.11g : 11b/g/n 802.11a : 11a/n 802.11g : 1 802.11a : 1 802.11g : BUFFALO-XXXXXX (the last 6 digits of the AirStations MAC address) + _G 802.11a : BUFFALO-XXXXXX (the last 6 digits of the AirStations MAC address) + _A
- 38 -
Chapter 5 Default Configuration Settings Feature Advanced Parameter VLAN ID Auto Channel Auto Channel Range Check Channel Time Channel Bandwidth BSS Basic Rate Set Contention Slot
(802.11g only) Preamble Type
(802.11g only) Guard Interval 802.11g protection
(802.11g only) 802.11n protection DTIM Period RTS Threshold Fragment Threshold Multicast Rate Tx Power Beacon Interval Station Keepalive SM Power Save Default Setting 802.11g : 1 802.11a : 1 802.11g : Enabled 802.11a : Enabled 802.11g : 1 - 11 ch 802.11a : W52 802.11g : Half Hour 802.11a : Half Hour 802.11g : 20 MHz 802.11a : 40 MHz 802.11g : 1, 2, 5.5, 11 Mbps 802.11a : 6, 12, 24 Mbps 802.11g : Short 802.11g : Long 802.11g : Short GI 802.11a : Short GI 802.11g : Enabled 802.11g : Enabled 802.11a : Enabled 802.11g : 1 802.11a : 1 802.11g : 2347 802.11a : 2347 802.11g : 2346 802.11a : 2346 802.11g : Auto 802.11a : Auto 802.11g : 100 %
802.11a : 100 %
802.11g : 100 802.11a : 100 802.11g : 60 802.11a : 60 802.11g : Disabled 802.11a : Disabled
- 39 -
Chapter 5 Default Configuration Settings Feature Security Parameter SSID Default Setting 802.11g : BUFFALO-XXXXXX (the last 6 digits of the AirStations MAC address) + _G 802.11a : BUFFALO-XXXXXX (the last 6 digits of the AirStations MAC address) + _A WDS Function Security Mode Broadcast SSID Privacy Separator WLAN Client Table Additional Authentication Load balance (Max associations) 802.11g : Enabled 802.11a : Enabled 802.11g : No Use 802.11a : No Use 802.11g : 25 / 25 802.11a : 25 / 25 802.11g : No Authentication 802.11a : No Authentication 802.11g : No Additional Authentication 802.11a : No Additional Authentication 802.11g : None 802.11a : None 802.11g : Disabled 802.11a : Disabled 802.11g : -
802.11a : -
Wireless MAC address of WDS Peer 802.11g : -
802.11a : -
802.11g : Untagged Port 802.11a : Untagged Port 802.11g : -
802.11a : -
802.11g : None 802.11a : None RADIUS Server IP Address : -
Authentication Port Shared Secret Session-Timeout None Primary RADIUS Server (11g) Secondary RADIUS Server (11g) Primary RADIUS Server (11a) Secondary RADIUS Server (11a) MAC Address Filtering Table Local MAC Address VLAN mode Encryption VLAN ID
: 1812
: 3600 Seconds Client List WDS RADIUS MAC Filter
- 40 -
Chapter 5 Default Configuration Settings Feature WMM Parameter QoS (priority control) WMM-EDCA Parameters
(Priority AC_BK (Low) ) WMM-EDCA Parameters
(Priority AC_BE (Normal) ) WMM-EDCA Parameters
(Priority AC_VI (High) ) WMM-EDCA Parameters
(Priority AC_VO (Highest) ) Administrator Name Administrator Password User Name User Password AirStation Name Management Interface SNMP Version SNMP Get community SNMP Set community Name /
Password Default Setting Disabled CWMin CWMax Aifsn Txop CWMin CWMax Aifsn Txop CWMin CWMax Aifsn Txop For AP 4 10 7 0 For AP 4 6 3 0 For AP 3 4 1 94 For AP 2 3 1 47 For STA 4 10 7 0 For STA 4 10 3 0 For STA 3 4 2 94 For STA 2 3 2 47 CWMin CWMax Aifsn Txop admin password user password AP + AirStation's MAC Address HTTP HTTPS SNMP v1 / v2c pubclic private
: Enabled
: Enabled
: Disabled
- 41 -
Default Setting 2012 Year 1 Month 1 Day 0 Hour 0 Minute 0 Second Disabled None 24 hours
(GMT-6:00) Central America, or
(GMT) Greenwich Mean Time: Dublin, Edinburgh, Lisbon, London Disabled None Disabled Unregistered Use the file on the PC Chapter 5 Default Configuration Settings Feature Date / Time /
NTP Parameter Local Time NTP Functionality Server Name Update Interval Time Zone Syslog Transfer Admin Tools Save / Restore Settings Firmware Update LED Config Log Transfer Syslog Server Transfer log to the USB storage Registration status There are no valid file. Update firmware with Browsing PC Power LED LAN LED Wireless LED USB LED On On On On
- 42 -
Appendix A - Specifications Wireless LAN Interface Standard Compliance Transmission Method 802.11a Frequency Range Available 802.11a frequencies depend on the country of purchase. See the next IEEE802.11a / IEEE802.11b / IEEE802.11g / IEEE802.11n Direct Sequence Spread Spectrum (DSSS), OFDM, MIMO page for details. 802.11g Frequency Range 2,412 - 2,462 MHz (Channels 1 - 11) Transmission Rate 11, 5.5, 2, 1 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11b:
802.11a/g:
802.11n Infrastructure Mode, WDS Mode AOSS, WPA2 (TKIP/AES), WPA (TKIP/AES), WPA/WPA2 mixed PSK, IEEE 802.1X / EAP, 64-bit and 128-bit WEP, Mac Address Filter 20 MHz BW (Long GI) 130, 117, 104, 78, 52, 39, 26, 13 Mbps (2 stream) 65, 58.5, 52, 39, 26, 19.5, 13, 6.5 Mbps (1 stream) 20 MHz BW (Short GI) 144.4, 130, 115.6, 86.7, 57.8, 43.3, 28.9, 14.4 Mbps (2 stream) 72.2, 65, 57.8, 43.3, 28.9, 21.7, 14.4, 7.2 Mbps (1 stream) 40 MHz BW (Long GI) 270, 243, 216, 162, 108, 81, 54, 27 Mbps (2 stream) 135, 121.5, 108, 81, 54, 40.5, 27, 13.5 Mbps (1 stream) 40 MHz BW (Short GI) 300, 270, 240, 180, 120, 90, 60, 30 Mbps (2 stream) 150, 135, 120, 90, 60, 45, 30, 15 Mbps (1 stream) IEEE802.3ab (1000BASE-T), IEEE802.3u (100BASE-TX), IEEE802.3 (10BASE-T) 10 / 100 / 1000 Mbps 1000BASE-T 4DPAM5, 100BASE-TX 4B5B/MLT-3, 10BASE-T Manchester Coding CSMA/CD Access Mode Security Wired LAN Interface Standard Compliance Transmission Rate Transmission Encoding Access Method Speed and Flow Control Number of LAN Ports LAN Port Connector 10 / 100 / 1000 Mbps, Auto Sensing, Auto MDIX 2 RJ-45
- 43 -
Appendix A Specifications USB Interface Interface Connector Type Compliance Other Power Supply Power Consumption Dimensions Weight Operating Environment 802.11a Frequency Range USA Canada EU Kuwait Saudi Arabia UAE Oman Qatar Egypt Singapore Australia Hong Kong The Philippines India Thailand Malaysia South Korea China Taiwan USB 2.0 Type A (plug) 5.0 V 500 mA (max 1000 mA) External AC 100-240 V Universal, 50/60 Hz Power over Ethernet About 12 W (Max) 152 mm x 182 mm x 35mm (5.98 x 7.17 x 1.38 in.) 440 g (15.52 oz.) (not including antennas) 0 - 45 C (32 - 104 F), 10 - 90% (non-condensing) 5,180 - 5,240 MHz (Channels 36, 40, 44, 48) 5,745 - 5,825 MHz (Channels 149, 153, 157, 161, 165) 5,180 - 5,240 MHz (Channels 36, 40, 44, 48) 5,180 - 5,240 MHz (Channels 36, 40, 44, 48) 5,745 - 5,825 MHz (Channels 149, 153, 157, 161, 165) 5,180 - 5,240 MHz (Channels 36, 40, 44, 48) 5,745 - 5,825 MHz (Channels 149, 153, 157, 161, 165) 5,745 - 5,825 MHz (Channels 149, 153, 157, 161, 165) 5,745 - 5,825 MHz (Channels 149, 153, 157, 161, 165)
- 44 -
Appendix B - TCP/IP Settings Windows 7 To configure TCP/IP in Windows 7, follow the procedure below. 1 2 3 4 5 6 7 Click [Start] > [Control Panel] > [Network and Internet]. Click [Network and Sharing Center]. Click [Change Adapter Settings] on the left side menu. Right-click on [Local Area Connection], then click [Properties]. If the User Account Control screen opens, click [Yes] or [Continue]. Select [Internet Protocol Version 4 (TCP/IPv4)] then click [Properties]. To have DHCP set your IP address settings automatically, check [Obtain an IP address automatically] and [Obtain DNS server address automatically]. To set your IP address settings manually, enter values for each setting. Examples:
If the routers IP address is 192.168.11.1, IP address 192.168.11.80 255.255.255.0 Subnet mask 192.168.11.1 Default gateway Preferred DNS server 192.168.11.1 blank Alternate DNS server 8 Click [OK].
- 45 -
Appendix B TCP/IP Settings Windows Vista To configure TCP/IP in Windows Vista, follow the procedure below. 1 2 3 4 5 6 7 Click [Start] > [Settings] > [Control Panel]. Click [Network and Sharing Center]. Click [Manage network connections] on the left side menu. Right-click on [Local Area Connection], then click [Properties]. If the User Account Control screen opens, click [Yes] or [Continue]. Select [Internet Protocol Version 4 (TCP/IPv4)], then click [Properties]. To have DHCP set your IP address settings automatically, check [Obtain an IP address automatically] and [Obtain DNS server address automatically]. To set your IP address settings manually, enter values for each settings. Example:
If the routers IP address is 192.168.11.1, IP address 192.168.11.80 255.255.255.0 Subnet mask 192.168.11.1 Default gateway 192.168.11.1 Preferred DNS server Alternate DNS server blank 8 Click [Close].
- 46 -
Appendix B TCP/IP Settings Windows XP To configure TCP/IP in Windows XP, follow the procedure below. 1 2 3 4 5 Click [Start] > [Settings] > [Control Panel]. Double-click [Network]. Right click on [Local Area Connection], then click [Properties]. Select [Internet Protocol (TCP/IP)], then click [Properties]. To have DHCP set your IP address settings automatically, check [Obtain an IP address automatically] and [Obtain DNS server address automatically]. To set your IP address settings manually, enter values for each setting. Examples:
If the routers IP address is 192.168.11.1, 192.168.11.80 IP address 255.255.255.0 Subnet mask Default gateway 192.168.11.1 192.168.11.1 Preferred DNS server Alternate DNS server blank 6 Click [Close].
- 47 -
Appendix B TCP/IP Settings Mac OS X To configure TCP/IP in Mac OS X, follow the procedure below. 1 2 3 4 Click [Apple menu] > [System Preferences]. Click [Network]. Click [Ethernet]. To have DHCP set your IP address settings automatically, select [Using DHCP] in the Configure IPv4 field. To set your IP address settings manually, select [Manually] in the Configure IPv4 field and enter values for each setting. Examples:
If the routers IP address is 192.168.11.1, 192.168.11.80 IP Address 255.255.255.0 Subnet Mask Router 192.168.11.1 192.168.11.1 DNS Server Search Domains blank 5 Click [Apply].
- 48 -
Appendix C - Restoring the Default Confi gura-
tion With the AirStation powered on, hold down this button for 3 seconds to return it to factory default settings.
- 49 -
Appendix D - Regulatory Compliance Information Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. For operation within 5.15 ~ 5.25GHz frequency range, it is restricted to indoor environment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Important Note - FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user.
- 50 -
Appendix D Regulatory Compliance Information Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la norme CNR-210 dIndustrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes:
(1) le dispositif ne doit pas produire de brouillage prjudiciable, et
(2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Caution:
The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems. High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices. Le dispositif fonctionnant dans la bande 5150-5250 MHz est rserv uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. Les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. Important Note - Canada Radiation Exposure Statement:
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. NOTE IMPORTANTE: (Pour lutilisation de dispositifs mobiles) Dclaration dexposition aux radiations:
Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Europe EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC:
- 51 -
Appendix D Regulatory Compliance Information EN60950-1: 2006 +A11: 2009 Safety of Information Technology Equipment EN50385 : (2002-08) Product standard to demonstrate the compliance of radio base stations and fixed terminal stations for wireless telecommunication systems with the basic restrictions or the reference levels related to human exposure to radio frequency electromagnetic fields (110MHz - 40 GHz) - General public EN 300 328 V1.7.1: (2006-10) Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems;
Data transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive EN 301 893 V1.5.1: (2008-12) Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive EN 301 489-1 V1.8.1: (2008-04) Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility
(EMC) standard for radio equipment and services; Part 1: Common technical requirements EN 301 489-17 V2.1.1 (2009-05) Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility
(EMC) standard for radio equipment; Part 17: Specific conditions for Broadband Data Transmission Systems This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies. In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services. This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France.
- 52 -
Appendix D Regulatory Compliance Information esky [Czech]
Buffalo Technology Inc. tmto prohlauje, e tento AirStation WAPS-APG600H / WAPS-AG300H je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/ES. Dansk [Danish]
Undertegnede Buffalo Technology Inc. erklrer herved, at flgende udstyr AirStation WAPS-
APG600H / WAPS-AG300H overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/
EF. Deutsch [German]
Hiermit erklrt Buffalo Technology Inc. dass sich das Gert AirStation WAPS-APG600H / WAPS-
AG300H in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EG befindet. Eesti [Estonian]
Kesolevaga kinnitab Buffalo Technology Inc. seadme AirStation WAPS-APG600H / WAPS-
AG300H vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. English Hereby, Buffalo Technology Inc. declares that this AirStation WAPS-APG600H / WAPS-AG300H is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Espaol [Spanish]
Por medio de la presente Buffalo Technology Inc. declara que el AirStation WAPS-APG600H / WAPS-
AG300H cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
[Greek]
Buffalo Technology Inc. AirStation WAPS-APG600H / WAPS-AG300H 1999/5/. Franais [French]
Par la prsente Buffalo Technology Inc. dclare que lappareil AirStation WAPS-APG600H / WAPS-
AG300H est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Italiano [Italian]
Con la presente Buffalo Technology Inc. dichiara che questo AirStation WAPS-APG600H / WAPS-
AG300H conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
- 53 -
Appendix D Regulatory Compliance Information Latviski [Latvian]
Ar o Buffalo Technology Inc. deklar, ka AirStation WAPS-APG600H / WAPS-AG300H atbilst Direktvas 1999/5/EK btiskajm prasbm un citiem ar to saisttajiem noteikumiem. Lietuvi [Lithuanian]
iuo Buffalo Technology Inc. deklaruoja, kad is AirStation WAPS-APG600H / WAPS-AG300H atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Nederlands [Dutch]
Hierbij verklaart Buffalo Technology Inc. dat het toestel AirStation WAPS-APG600H / WAPS-AG300H in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Malti[ Maltese]
Hawnhekk, Buffalo Technology Inc. , jiddikjara li dan AirStation WAPS-APG600H / WAPS-AG300H jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Magyar [Hungarian]
Alulrott, Buffalo Technology Inc. nyilatkozom, hogy a AirStation WAPS-APG600H / WAPS-AG300H megfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EC irnyelv egyb elrsainak. Polski [Polish]
Niniejszym Buffalo Technology Inc. owiadcza, e AirStation WAPS-APG600H / WAPS-AG300H jest zgodny z zasadniczymi wymogami oraz pozostaymi stosownymi postanowieniami Dyrektywy 1999/5/EC. Portugus [Portuguese]
Buffalo Technology Inc. declara que este AirStation WAPS-APG600H / WAPS-AG300H est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE. Slovensko [Slovenian]
Buffalo Technology Inc. izjavlja, da je ta AirStation WAPS-APG600H / WAPS-AG300H v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloili direktive 1999/5/ES. Slovensky [Slovak]
Buffalo Technology Inc. tmto vyhlasuje, e AirStation WAPS-APG600H / WAPS-AG300H spa zkladn poiadavky a vetky prslun ustanovenia Smernice 1999/5/ES. Suomi [Finnish]
Buffalo Technology Inc. vakuuttaa tten ett AirStation WAPS-APG600H / WAPS-AG300H tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen.
- 54 -
Appendix D Regulatory Compliance Information Svensk [Swedish]
Hrmed intygar Buffalo Technology Inc. att denna AirStation WAPS-APG600H / WAPS-AG300H str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. Taiwan:
SAR compliance has been established in typical laptop computer(s) with CardBus slot, and product could be used in typical laptop computer with CardBus slot. Other application like handheld PC or similar device has not been verified, may not comply with related RF exposure rules, and such use shall be prohibited. Safety This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this manual and of the computer manufacturer must therefore be allowed at all times to ensure the safe use of the equipment. NCC 5.25-5.35 B
(B )
- 55 -
Appendix E - Environmental Information The equipment that you have purchased has required the extraction and use of natural resources for its production. The equipment may contain hazardous substances that could impact health and the environment. In order to avoid the dissemination of those substances in our environment and to diminish the pressure on the natural resources, we encourage you to use the appropriate take-back systems. The take-back systems will reuse or recycle most of the materials of your end life equipment in a sound way. The crossed-out wheeled bin symbol invites you to use those systems. If you need more information on collection, reuse, and recycling systems, please contact your local or regional waste administration.
- 56 -
Appendix F - GPL Information The source code for Buffalo products that use GPL code is available at http://opensource.buffalo.jp/ .
- 57 -
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2012-09-13 | 5755 ~ 5795 | DTS - Digital Transmission System | Original Equipment |
2 | 5190 ~ 5230 | NII - Unlicensed National Information Infrastructure TX |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2012-09-13
|
||||
1 2 | Applicant's complete, legal business name |
BUFFALO INC.
|
||||
1 2 | FCC Registration Number (FRN) |
0005866322
|
||||
1 2 | Physical Address |
AKAMONDORI Bldg., 30-20, Ohsu 3-chome, Naka-ku
|
||||
1 2 |
Nagoya, N/A 460-8315
|
|||||
1 2 |
Japan
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
B******@phoenix-testlab.de
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
FDI
|
||||
1 2 | Equipment Product Code |
04604022-0
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
M******** I****
|
||||
1 2 | Title |
General Manager
|
||||
1 2 | Telephone Number |
81(50********
|
||||
1 2 | Fax Number |
81(50********
|
||||
1 2 |
i******@melcoinc.co.jp
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 03/09/2013 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | NII - Unlicensed National Information Infrastructure TX | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 11n/a&11n/g/b Concurrent Smart model; 11n/a,11n/g/b Single Smart model | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Output Power listed is the maximum combined conducted peak output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz and 5755 to 5795 MHz respectively. | ||||
1 2 | Output Power listed is the maximum combined conducted peak output power as indicated in the filing. This device must be installed and operated to provide a separation distance of at least 20 cm from all. End-users must be provided transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 5190 to 5230 MHz. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Sporton International Inc
|
||||
1 2 |
Sporton International Inc.
|
|||||
1 2 | Name |
A****** C********
|
||||
1 2 | Telephone Number |
886-2******** Extension:
|
||||
1 2 |
886-3******** Extension:
|
|||||
1 2 | Fax Number |
886-2********
|
||||
1 2 |
886-3********
|
|||||
1 2 |
a******@sporton.com.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC MO | 2412 | 2462 | 0.251 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15C | CC MO | 2422 | 2452 | 0.085 | |||||||||||||||||||||||||||||||||||
1 | 3 | 15C | CC MO | 5745 | 5825 | 0.176 | |||||||||||||||||||||||||||||||||||
1 | 4 | 15C | CC MO | 5755 | 5795 | 0.184 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15E | CC MO | 5180 | 5240 | 0.018 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15E | CC MO | 5190 | 5230 | 0.018 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC