User Manual High Power Wireless Notebook Adapter WLI-CB-G54HP www.buffalotech.com Table of Contents Table of Contents Card Info ........................................................... 3 WinXP Setup ..................................................... 4 WinXP Zero Cong (Client Manager) ................ 8 Win98, WinME, Win2K Setup .......................... 11 Buffalo Client Manager ................................... 14 Buffalo Client Manager Cong ........................ 17 Antenna Information ....................................... 24 Specications .................................................. 25 Troubleshooting .............................................. 26 Glossary .......................................................... 28 FCC/CE Information ......................................... 35 Warranty Information ...................................... 38 Technical Support ........................................... 39 2 Card Info High Power Wireless Notebook Adapter The High Power Wireless Notebook Adapter is a CardBus card that provides wireless connec-
tivity to notebook PCs. It uses an internal amplier to increase the radio output so that it can connect to APs/Wireless Routers further away and transfer data at range faster (than traditional 802.11g CardBus cards). Buffalo Technology recommends use with the High Power Wireless Router (WZR-HP-G54) for maximum range and performance. An external antenna can be added to the High Power Wireless Notebook Adapter to increase its range and versatility. Antenna information can be found on Page 24. 3 WinXP Setup Insert the AirNavigator CD into the CD-ROM drive of the PC. The Air Navigator Setup Wizard launches automatically. If the Air Navigator Setup Wiz-
ard does not launch automati-
cally, launch the wizard manu-
ally by selecting Start>>Run to open the Run dialog box. Enter D:\Setup.exe in the Open eld. D: represents the letter as-
signed to the CD-ROM drive. If another letter is assigned to the CD-ROM drive, your command should refelect that difference. Click the OK button to launch the wizard. Windows 2000 & XP Installation & Conguration 1. Installing the Wireless Notebook Adapter Drivers:
4 WinXP Setup Select Install Wireles Adapter. Click the OK button to begin the installation process. Review the Software License Agreement. Click the Yes but-
ton to conrm your agreement with the terms and continue in-
stalling the Wireless Notebook Adapter drivers. Click the No button to abort the installation process. 5 2. Installing the Wireless Notebook Adapter:
WinXP Setup Insert the Wireless Notebook Adapter, with the Buffalo logo facing up, into an available CardBus slot. CardBus slots are usually located on the left or right side of the notebook. Once the Wire-
less Notebook Adapter is installed correctly, the Found New Hardware Wizard will launch auto-
matically. If the Found New Hardware Wizard does not launch, remove the Wireless Notebook Adapter and restart the notebook. Reinsert the Wireless Notebook Adapter once the notebook has rebooted. Then, the Found New Hardware Wizard will launch automatically. 6 WinXP Setup Select the driver you want to install. If multiple drivers are listed, select the most recent driver version. Click the Next button. If a window opens, stating that your driver does not pass Windows Logo testing, click the Continue Anyway button. When the Wireless Notebook Adapter is successfully installed, click the Finish button. Restart your PC if prompted. 7 WinXP Client Manager 3. Conguring Wireless Zero Conguration Service:
If the Wireless Zero Conguration Service is activated, Windows will scan for available wireless access points once the Wireless Notebook Adapter is properly installed. If Windows detects one or more access points, a net-
working icon appears on the task bar. One or more wireless networks are available appears as a caption accompanying the icon. Note: If the Wireless Zero Conguration Service is not functioning, select Start>Control Panel>Administrative Tools>Services. Select Automatic in the Startup Type eld of Wireless Zero Conguration Service to enable the Wireless Zero Conguration Service. The default value of Wireless Zero Conguration Service is Automatic. Right click the networking icon in the taskbar and se-
lect View Available Wireless Networks to display a list of available wireless networks. Select an access point network name or SSID and click the Connect button to establish a connection. You may need to check the box indicating you are connecting to an unsecured network. See Page 8 if you need to enter an SSID network name or WEP/WPA encryption key. 8 WinXP Client Manager Click the Advanced button to enter an SSID network name or WEP/WPA encryption key, if either is necessary. To add an SSID network name that is not available, click the Add button. 9 WinXP Client Manager To congure a WEP/WPA encryption key, select the ap-
propriate wireless network and click the Congure button. From the pull down menu, select the appropriate Net-
work Authentication and Data Encryption for the wireless network. Enter and conrm the Network Key and Key Index. Click the OK button when nished. Note: Buffalo Technology recommends that users of the Wireless Zero Conguration Service upgrade to the latest version freely available at: http://www.microsoft.com. For advanced support in using Windows XPs Wireless Zero Conguration Service, refer to the Buffalo Support Web Site: http://www.buffalotech.com Skip to Page 14 if you are not using Windows XP or prefer not to use Windows XP's Wireless Zero Configuration Service. If you plan on using AOSS then you will need to install Buffalos Client Manager software; skip to Page 14 to do so. 10 Win98, WinME, Win2K Setup Windows 98/ME/2000 Installation & Conguration 1. Installing the Wireless Notebook Adapter:
Insert the Wireless Notebook Adapter, with the Buffalo logo facing up, into an available CardBus slot. CardBus slots are usually located on the left or right side of the notebook. Once the Wire-
less Notebook Adapter is installed correctly, the Found New Hardware Wizard will launch auto-
matically. If the Found New Hardware Wizard does not launch, remove the Wireless Notebook Adapter and restart the notebook. Reinsert the Wireless Notebook Adapter once the notebook has rebooted. Then, the Found New Hardware Wizard will launch automatically. 11 Win98, WinME, Win2K Setup 2. Installing the Wireless Notebook Adapter-Drivers:
Insert the AirNavigator CD. Click Next at the Welcome to the Found New Hardware Wiz-
ard. Select Search for a suitable driver for my device. Click the Next button to continue. Select only the CD-ROM drives checkbox, and clear any other checkboxes that are selected. Click the Next button to continue. 12 Win98, WinME, Win2K Setup Windows will display a driver you can use with the Wireless Desktop Wireless Notebook Adapter Adapter. Click the Next button to continue. Windows 2000: If the Digital Signa-
ture Not Found page opens, informing that no digital signature exists for the driver you are installing, click the Yes button to con-
tinue the installation process. When the Wireless Notebook Adapter is successfully installed, click the Finish button. Restart your computer if prompted. See the Installing Client Manager section to install the Client Manager. 13 Buffalo Client Manager Client Manager Use Client Manager to congure your wireless network. Use Client Manager to survey and connect to available access points, enable and use WEP encryption, and create connection proles. Note: Client Manager does not function properly if the Windows XP Wireless Zero Conguration Service is enabled. Installing Client Manager Insert the AirNavigator CD. The AirNavigator dialog box will open automati-
cally. If the AirNavigator dialog box does not open automatically, select StartRun and enter D:\Setup.exe in the Open eld to open the dialog box manually. D: represents the letter as-
signed to the CD-ROM drive. If another letter is assigned to the CD-ROM drive, your command should reect that difference. Click the OK but-
ton. Select Install Client Manager to launch the Install Shield Wizard. Once the InstallShield Wizard launches, click the Next button to begin the software installa-
tion. 14 Buffalo Client Manager Once the Installer Wizard launches, click the Next button to begin the software installation. Press I Agree to accept the license agreement and continue the installation process. 15 Buffalo Client Manager Press the OK button to nish and close the installation program. Press the Exit button to exit the Client Manager installation utility. The Buffalo Client Manager is now installed and running, right clicking on its icon (the black notebook icon) will allow you to begin using it. 16 Client Manager Conguration Client Manager Conguration Use Client Manager to congure your wireless network. To assist in conguring your wireless network, Client Manager consists of the Status page, the Survey page, and the Proles page. You can access each page by clicking the corresponding button on Client Manager. In addition to these pages, several dialog boxes are available to meet specialized conguration needs. You can access the Edit Prole dialog box, New Prole dialog box, IP Conguration dialog box, or WEP Congura-
tion dialog box using the Client Manager pages. Status Page Click the Status button to open this page. By default, this page is displayed when you start Client Manager. This page displays the status of the connection between the wireless adapter and another wireless device. This page only displays connection information no changes to the connection can be made from this screen. This page includes the following components:
Network Type Displays what mode the network device is in. Ad-Hoc or Infrastructure are the available modes. 17 Client Manager Conguration Rate The speed that the two wireless clients are communicating at. If the Client Manager is not connected to a remote wireless device (access point or another client) then no rate will be displayed. Channel The channel that the two wireless clients are communicating at. If the Client Manager is not connected to a remote wireless device (access point of another client) then no channel will be displayed. The available channels for use are 1-11. Security The type of encryption that the two wireless clients are communicating with. If the Client Manager is not connected to a remote wireless device (access point of another client) then No Encryption will be displayed. IP Address The IP address of the machine the Client Manager is installed on. If the Client Manager is not connected to a remote wireless device (access point of another client) or is not connected to a network with DHCP, then no IP address will be displayed. MAC Address The MAC address of the wireless client device inside the computer Client Man-
ager is installed on. If no wireless device is present in the computer, then no MAC Address will be displayed. Signal Strength Displays the strength of the signal. Signal Strength is based on the peak signal level the wireless adapter receives from the wireless device to which it is connected. Next to the signal level is the wireless hardware type that the computer has available. 18 Client Manager Conguration Survey Page Click the Survey button to open this page. Use this page to survey the area, display available ac-
cess points, and connect to available access points. This page includes the following components:
Wireless SSID Displays the SSID associ-
ated with each available access point. The SSID is the unique network name that func-
tions as an identier for your wireless devices. All wireless devices on a network must use identical SSIDs to successfully associate with other devices on the network. buffalo_test is an example of a valid SSID. Mode Displays the mode/rate set that the remote wireless device is offering. Key Displays whether the wireless net-
work is using any sort of encryption. Press the Connect button to connect to a listed SSID, or press the Refresh button to perform another survey and update the survey list. 19 Client Manager Conguration Once the Connect button is pressed, you will be prompted to enter any encryption related infor-
mation. The Acquire IP automatically checkbox tells the cli-
ent device to obtain an IP automatically from a DHCP server. This is the recommended setting. The Encryption drop down list allows you to select the type of encryption for the network. By default the proper encryption type should already be selected. In the event that no encryption is used, leave the No Encryption option selected. by the wireless network must be inputted. Please consult your wireless access point or routers documentation for proper input of the encryption keys. Some wireless networks may require you to enter multiple keys, in this event, four separate elds are available for encryption keys. The Encryption Key is where the actual key required The Save settings as a prole option will store this wireless network in your proles. This means you will automatically connect to this network when inside its range. This settings is recommended if you plan on using this wireless network more than once. 20 Client Manager Conguration Proles Page Click the Proles button to open this page. Use this page to access your proles. Proles allow you to save the information associated with a specic wireless network so you can quickly and easily connect to that network when you are in that location. The Proles page allows you to add, delete, and edit your proles, as well as import and export data. Connect Click the Connect button to con-
nect to the selected prole and return to the Status page. Edit Click the Edit button to edit the se-
lected proles settings. The Edit button also allows you to delete a prole no longer used or required. Add Click the Add button to add a prole manually. You will need important information such as SSID, encryption settings, and network type. 21 Client Manager Conguration New Prole Dialog Box Use this dialog box to create a new prole. Prole Name Enter the name you want to associate with the new prole. Network Type Select the network mode you want to associ-
ate with the new prole. Select Infrastructure if your network consists of both wired and wireless devices that communicate through a central device, such as an access point. Select Ad-hoc if your network consists of only wireless devices that communicate with each other directly. Network Name SSID Enter the SSID of your network. The SSID is the unique network name that functions an identier for your wireless devices. All wireless devices on a network must use identical SSIDs to successfully associate with other devices on the network. myssid is an example of a valid SSID. Channel Displays the channel associated with the new prole. The channel indicates what range of frequencies the radio waves emitted by the wireless device are occupying. Devices that meet 802.11b and 802.11g standards can use channels 1-11 within the 2.4 GHz spectrum. Encryption Type Displays the types of encryptions available. Once selected, you will be required to enter the Encryption Key Number and the Encryption Key as well. For the Encryp-
tion Key Number, it is recommended to use 1 unless specied to by an administrator. OK Click the OK button to save your specications and return to the Proles page. 22 Client Manager Conguration Advanced Prole Options Network Tab Displays the network information tab. A static IP can be specied for this wire-
less prole here. It is not recommended to change any of these settings unless specied by an administrator. Browser Tab Displays settings to change your browser preferences for this wireless prole. A specic home page can be specied when connected to this wireless prole as can specic proxy server addresses. Printers Tab Displays the printers tab. A specic default printer can be associated to this pro-
le. Thus, when connected to this prole, a specic printer will be used as the default printer. Network Tab Displays the network information tab. A static IP can be specied for this wire-
less prole here. It is not recommended to change any of these settings unless specied by an administrator. OK Click the OK button to save your specications and return to the Proles page. AOSS Icon The AOSS icon is used to launch AOSS client requests for AOSS communication. Inside your wireless clients box, an AOSS supplement guide is present. This guide leads to step-by-step instructions on using the AOSS icon. 23 Antenna Information The WLI-CB-G54HP comes with an external antenna connector. Buffalo Technology sells numerous external antennas that are compatible with this card. The connector type is called an MC-Card Connector. Adding an external antenna can further increase the power and range of this device. Please see the Buffalo Technology Web Page (http://www.buffalotech.com) to com-
pare antennas available for your adapter. 24 Wireless LAN Interface Standards Compliance Communication Protocol Frequency Range Transmission Rates Access Mode Security Others Interface Environmental Operation Specications IEEE 802.11g Direct Sequence Spread Spectrum
(DS-SS), Half Duplex 2.412-2.462Mhz 802.11g: 1, 2, 5.5, 11, 18, 24, 36, 48, 54 125* Mode: 13, 20, 27, 40, 54, 80, 110, 125 Infrastructure mode, Ad-Hoc WEP 128/64 bit, 802.1x, WPA-TKIP/AES CardBus 0-55c, 20-80% (non-condensing) 25 Troubleshooting / FAQ Troubleshooting / FAQ Use this section to locate answers to frequently asked questions. What should I do if I already have a version of Client Manager on my PC?
Update your Client Manager to the version on the CD. If you do not update your Client Manager, there could be a loss of functionally, as some versions of Client Manager will not work properly with the G54 Wireless Notebook Adapter. Before updating Client Manager, you must uninstall all previous versions of Client Manager. To update your Client Manager, load the Air Navigator CD and select Install Client Manager. Why won't all my network clients work?
Some operating systems support only a limited number of network clients. Windows 98/Me: These operating systems support only four network clients. If you install more than four network clients, only the rst four clients you install will work. Will Client Manager support all operating systems?
Client Manager and the Wireless Notebook Adapter currently support only Windows 98/ME/2000/
XP. They do not currently support Windows NT, Mac OS, or Linux. For more information, refer to the Mac OS and Linux page in the Troubleshooting section of this help le. 26 Troubleshooting / FAQ Where can I attach my external antenna?
Insert your external antenna into the antenna connector, located on the back of the G54 Wireless Notebook Adapter. Why won't Client Manager function properly?
Windows XP The Wireless Zero Conguration Service conicts with Client Manager. Select StartControl PanelAdministrative ToolsServices to open the Services window. Select Dis-
abled in the Startup Type eld of Wireless Zero Conguration Service to disable the Wireless Zero Conguration Service. I have more than one Air Navigator CD. Do I need more than one CD?
No. You receive the same Air Navagator CD with each Buffalo Technology access point and wire-
less adapter. The CDs are identical and you only need one copy. 27 Glossary 10BaseT or 100BaseTx: 802.3 based Ether-
net network that uses UTP (Unshielded twisted pair) cable and a star topology. 10 is 10 Mbps and 100 is 100 Mbps. 802.1x: The standard for wireless LAN authenti-
cation used between an AP and a client. 802.1x with EAP will initiate key handling. Ad-Hoc Network: The wireless network based on a peer-to-peer communications session. Also referred to as AdHoc. Bandwidth: The transmission capacity of a computer or a communication channel, stated in Megabits per second (Mbps). BSS (Basic Service Set): An 802.11 network-
ing framework that includes an Access Point. Bus Mastering: A system in which the speci-
ed Input/Output device (e.g. NIC Card) can perform tasks without the intervention of the CPU. Client: A PC or workstation on a network. Cross-Over Wiring: A UTP cable that has its transmit and receive pair crossed to allow com-
munications between two devices. DCE (Data Communications Equipment):
Hardware used for communication with a Data Terminal Equipment (DTE) device. Default Gateway: The IP Address of either the nearest router or server for the LAN. Default Parameter: Parameter set by the manufacturer. Destination Address: The address portion of a packet that identies the intended recipient station. DHCP (Dynamic Host Conguration Pro-
tocol): Based on BOOTP, it uses a pool of IP addresses, which it assigns to each device con-
nected to it, and retrieves the address when the device becomes dormant for a period of time. DNS (Domain Name System): System used to map readable machine names into IP ad-
dresses 28 Glossary Driver: Software that interfaces a computer with a specic hardware device. DSSS (Direct Sequence Spread Spectrum):
Method of spreading a wireless signal into wide frequency bandwidth. DTE (Data Terminal Equipment): Device that con10BaseT or 100BaseTx: 802.3 based Ethernet network that uses UTP (Unshielded twisted pair) cable and a star topology. 10 is 10 Mbps and 100 is 100 Mbps. 802.1x: The standard for wireless LAN authenti-
cation used between an AP and a client. 802.1x with EAP will initiate key handling. Ad-Hoc Network: The wireless network based on a peer-to-peer communications session. Also referred to as AdHoc. Bandwidth: The transmission capacity of a computer or a communication channel, stated in Megabits per second (Mbps). BSS (Basic Service Set): An 802.11 network-
ing framework that includes an Access Point. Bus Mastering: A system in which the speci-
ed Input/Output device (e.g. NIC Card) can perform tasks without the intervention of the CPU. Client: A PC or workstation on a network. Cross-Over Wiring: A UTP cable that has its transmit and receive pair crossed to allow com-
munications between two devices. DCE (Data Communications Equipment):
Hardware used for communication with a Data Terminal Equipment (DTE) device. Default Gateway: The IP Address of either the nearest router or server for the LAN. Default Parameter: Parameter set by the manufacturer. Destination Address: The address portion of a packet that identies the intended recipient station. DHCP (Dynamic Host Conguration Pro-
tocol): Based on BOOTP, it uses a pool of IP addresses, which it assigns to each device con-
29 Glossary media network architecture. The IEEE 802.3 standard details its functionality. Ethernet cable: A wire similar to telephone cable that carries signals between Ethernet devices. File and Print Sharing: A Microsoft application that allows computers on a network to share les and printers. Firmware: Programming inserted into pro-
grammable read-only memory, thus becoming a permanent part of a computing device. Frame: A xed block of data, transmitted as a single entity. Also referred to as packet. Full-Duplex: To transmit on the same channel in both directions simultaneously. Gbps (Giga Bits per second): One billion bits per second. Half-duplex: To transmit on the same channel in both directions, one direction at a time. nected to it, and retrieves the address when the device becomes dormant for a period of time. DNS (Domain Name System): System used to map readable machine names into IP ad-
dresses Driver: Software that interfaces a computer with a specic hardware device. DSSS (Direct Sequence Spread Spectrum):
Method of spreading a wireless signal into wide frequency bandwidth. DTE (Data Terminal Equipment): Device that controls data owing to and from a computer. Dynamic IP Address: An IP address that is automatically assigned to a client station in a TCP/IP network, typically by a DHCP server. ESS (Extended Service Set): A set of two or more BSSs that form a single sub-network. ESS-ID is user identication used in the ESS LAN conguration. Ethernet: The most widely used architecture for Local Area Networks (LANs). It is a shared-
30 Glossary Hub: A device which allows connection of com-
puters and other devices to form a LAN. IEEE (Institute of Electrical and Electronics Engineers): The professional organization which promotes development of electronics technology. IP (Internet Protocol) Address: A unique 32-
binary-digit number that identies each sender or receiver of information sent in packets. Infrastructure: A wireless network or other small network in which the wireless network devices are made a part of the network through the Access Point. ISP (Internet Service Provider): A company that provides access to the Internet and other related services. IV (Initialization Vector): The header section of a message packet. LAN (Local Area Network): A group of com-
puters and peripheral devices connected to share resources. 31 LED (Light Emitting Diode): The lights on a hardware device representing the activity through the ports. MAC (Medium Access Control) Address:
A unique number that distinguishes network cards. Mbps (Mega Bits Per Second): A measure-
ment of millions of bits per second. MDI/X (Media Dependent Interface/Cross-
over): Port on a network hub or switch that crosses the incoming transmit lines with the outgoing receive lines. MHz (MegaHertz): One million cycles per second. MIB II: A database containing performance information and statistics on each device in a network. MIPS (Million Instructions Per Second): A measurement of processing speed. Glossary NAT (Network Address Translation): An inter-
net standard that enables a LAN to use one set of IP addresses for internal trafc and a second set for external trafc. NIC (Network Interface Card): An expansion card connected to a computer so the computer can be connected to a network. Packet: A block of data that is transferred as a single unit, also called a frame or a block. Packet Filtering: Discarding unwanted net-
work trafc based on its originating address or its type. PCI (Peripheral Component Interconnect): A bus that is connected directly to the CPU. PCMCIA (Personal Computer Memory Card International Association) Card: Remov-
able module that adds features to a portable computer. Ping (Packet Internet Groper): An Internet utility used to determine whether a particular IP address is online. Plug and Play: Hardware that, once in-
stalled (plugged in), can immediately be used (played), as opposed to hardware that requires manual conguration. PoE (Power over Ethernet): A mechanism to send DC power to a device using a CAT5 Ethernet cable. PPPoE (Point-to-Point Protocol over Ether-
net): A specication for connecting users on an Ethernet line to the Internet through a common broadband medium. Protocol: A standard way of exchanging infor-
mation between computers. RADIUS (Remote Authentication Dial In User Service): A server that issues authentication key to clients. RAM (Random Access Memory): Non-perma-
nent memory. Repeater Hub: A device that collects, strength-
ens and transmits information to all connected 32 Glossary devices, allowing the network to be extended to accommodate additional workstations. RC4: The encryption algorithm that is used in WEP. RJ-45 connector: An 8-pin connector used between a twisted pair cable and a data trans-
mission device. ROM (Read Only Memory): Permanent memory. Router: Device that can connect individual LANs and remote sites to a server. Roaming: The ability to use a wireless device while moving from one access point to another without losing the connection. Script: A macro or batch le containing instruc-
tions and used by a computer to perform a task. Server: Any computer that makes les or peripheral devices available to users of the network and has a resident Network OS. SMTP (Simple Mail Transfer Protocol): The protocol used to dene and deliver electronic mail (E-mail) from one location to another. SNMP (Simple Network Management Proto-
col: An application layer protocol that outlines the formal structure for communication among network devices. Static IP Address: A permanent IP address is assigned to a node in a TCP/IP network. Also known as global IP. STP (Shielded Twisted Pair): Twisted Pair cable wrapped in a metal sheath to provide ex-
tra protection from external interfering signals. Subnet Mask: An eight-byte address divided into 4 parts separated by periods. TCP/IP (Transmission Control Protocol/In-
ternet Protocol: Protocol used by computers when communicating across the Internet or Intranet. TFTP (Trivial File Transfer Protocol): Simple form of FTP (File Transfer Protocol), which 33 Glossary WAN (Wide Area Network): A networking sys-
tem covering a wide geographical area. WEP (Wired Equivalent Privacy): An encryp-
tion method based on 64 or 128-bit algorithm. Web Browser: A software program that allows viewing of web pages. Wi-Fi (Wireless Fidelity): An organization that tests and assures interoperability among WLAN devices. Wire Speed: The maximum speed at which a given packet can be transferred using Ethernet and Fast Ethernet standard specications. WLAN (Wireless LAN): A LAN topology using wireless devices. VPN (Virtual Private Network): A security method to connect remote LAN users to a cor-
porate LAN system. Uses UDP (User Datagram Protocol), rather than TCP/IP for data transport and provides no security features. TKIP (Temporal Key Integrity Protocol): An encryption method replacing WEP. TKIP uses random IV and frequent key exchanges. Topology: The shape of a LAN (Local Area Network) or other communications system. Twisted Pair: Cable that comprises 2 or more pair of insulated wires twisted together. UDP (User Datagram Protocol): A com-
munication method (protocol) that offers a limited amount of service when messages are exchanged between computers in a network. UDP is used as an alternative to TCP/IP. Uplink: Link to the next level up in a communi-
cation hierarchy. UTP (Unshielded Twisted Pair) cable: Two or more unshielded wires twisted together to form a cable. 34 FCC / CE Information Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is con-
nected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, (example - use only shielded interface cables when connecting to computer or peripheral devices). Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 35 FCC / CE Information IMPORTANT NOTE:
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. When external antenna is used, the separation distance shall be at least 20 cm. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. R&TTE Compliance Statement This equipment complies with all the requirements of the DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of 9 March 1999 on radio equipment and telecommunication terminal Equipment and the mutual recognition of their conformity (R&TTE). The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications Terminal Equipment and Satellite Earth Station Equipment) As of April 8, 2000. Safety This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this manual and of the computer manufacturer must therefore be allowed at all times to ensure the safe use of the equipment. 36 FCC / CE Information EU Countries intended for use The ETSI version of this device is intended for home and office use in Austria, Belgium, Denmark, Finland, France (with Frequency channel restrictions), Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Norway, The Netherlands, Portugal, Spain, Sweden, Switzerland and United Kingdom. The ETSI version of this device is also authorized for use in EFTA member states Iceland, Liechtenstein, Norway and Switzerland. EU Countries Not intended for use None. Potential restrictive use France: Only channels 10,11,12, and 13. 37 Warranty Information Buffalo Technology (USA), Inc. products comes with a two-year limited warranty from the date of pur-
chase. Buffalo Technology (USA), Inc. warrants to the original purchaser the product; good operating condition for the warranty period. This warranty does not include non-Buffalo Technology (USA), Inc. installed components. If the Buffalo product malfunctions during the warranty period, Buffalo Technol-
ogy (USA) Inc. will, replace the unit, provided the unit has not been subjected to misuse, abuse, or non-Buffalo Technology (USA), Inc. authorized alteration, modications or repair. All expressed and implied warranties for the Buffalo Technology (USA) Inc. product line including, but not limited to, the warranties of merchantability and tness of a particular purpose are limited in duration to the above period. Under no circumstances shall Buffalo Technology (USA), Inc. be liable in any way to the user for damages, including any lost prots, lost savings or other incidental or consequential damages arising out of the use of, or inability to use the Buffalo products. In no event shall Buffalo Technology (USA), Inc. liability exceed the price paid for the product from direct, indirect, special, incidental, or consequential damages resulting from the use of the product, its accompanying software, or its documentation. Buffalo Technology (USA), Inc. does not offer refunds for any product.
@ 2004 Buffalo Technology (USA) Inc. 38 Technical Support Buffalo Technology offers toll-free technical support 24 hours a day, 7 days a week for this product. Customers in the United States and Canada can obtain technical support using the following information:
Web:
E-mail:
Telephone:
www.buffalotech.com info@buffalotech.com 1(866)-752-6210 (USA & Canada only) FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. GPL Statement This product uses GPL/LGPL software. Please see the GNU LICENSE document on the LinkNavigator CD-
ROM for more information concerning the terms of the license. To obtain a copy of our open source software, please send a message to GPL@buffalotech.com to inquire about obtaining a package. 39