all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Users Manual | Users Manual | 1.96 MiB | September 01 2007 | |||
1 2 | External Photos | September 01 2007 | ||||||
1 2 | Cover Letter(s) | / September 01 2007 | ||||||
1 2 | Cover Letter(s) | September 01 2007 | ||||||
1 2 | External Photos | September 01 2007 | ||||||
1 2 | Operational Description | / September 01 2007 | ||||||
1 2 | ID Label/Location Info | September 01 2007 | ||||||
1 2 | Internal Photos | September 01 2007 | ||||||
1 2 | Operational Description | September 01 2007 | ||||||
1 2 | RF Exposure Info | September 01 2007 | ||||||
1 2 | Test Report | September 01 2007 | ||||||
1 2 | Test Setup Photos | September 01 2007 |
1 2 | Users Manual | Users Manual | 1.96 MiB | September 01 2007 |
User Manual - AirStation Draft-N WZR-AG300NH Nfiniti Wireless Router & AP www.buffalotech.com v. 1.00 Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Basic Setup . 6 AOSS . 12 Router Access Point Mode . 14 AirStation Configuration Tool . 17 Home . 17 Port Mapping . 18 Firewall . 19 Windows (MSN) Messenger. 20 Encryption . 21 Wireless Channel . 22 Firmware Update . 23 Internet Connection Reset . 24 Advanced Settings . 25 WAN Configuration . 26 WAN port . 26 PPPoE. 27 LAN Configuration . 28 LAN Port . 28
Table of Contents DHCP Server . 29 Manual Assignment of IP Address . 30 Network Configuration. 31 Route information . 31 Address Translation . 33 IP Filter . . . . . . . . . . . . . . . . . . . . . . 35 Intrusion Detector . 38 UPnP . 39 Wireless Configuration . 40 AOSS. 40 802.11a . . . . . . . . . . . . . . . . . . . . . . 41 802.11g . 44 MAC access limit . 47 Edit Registration List. 48 Admin Configuration . 49 Password . 49 Date/NTP . 50
Table of Contents Syslog Transfer . 51 Save/Load Configuration . 52 Initialize/Reboot . 53 Firmware Update. 54 Diagnostic. 55 System Information. 55 Log Info. 56 Packets Info. 57 Client Monitor. 58 Ping Test. 59 Connecting to an Existing Network. 60 Specifications . 61 Troubleshooting . 64 Glossary . 67 FCC/CE/R&TTE . 74 Warranty Information. 78 Contact Information . 79
Introduction Work and play - further and faster! Eliminate dead spots and enjoy faster connections with vastly extended range from Buffalo Technologys amazing wireless solution, the AirStation Draft-N Nfiniti Wireless Router & AP. System Requirements A high-speed (Broadband) Internet connection or existing local area connection. A computer with a network connection (wired or wireless) and a good web browser. The screenshots in this manual were taken with Firefox, but Netscape and Internet Explorer are also supported in versions 4.5 or later, and Safari 1.0 and later are supported with Macintosh OS X 10.2 and later. AirStation WZR-AG300NH Package Contents The AirStation WZR-AG300NH package contains the following items:
WZR-AG300NH AirStation AC adapter and power cable CAT5 LAN cable Utility CD with Manual Quick Setup Guides Warranty Statement
Basic Setup Begin by finding a good place to set up your router/access point. Some things to consider:
Youll need to be able to plug your internet connection into it, so it should go within reach of the LAN cable from your DSL or Cable modem. Youll also want a power outlet nearby. Keep the access point as central in your work area as possible. Signal strength and speed fall off with distance. Higher is often better. For instance, set it up on the top shelf of a bookcase rather than the bottom one, if possible.
Getting Ready Make note of the AirStations wired MAC address. The LAN or Wired MAC address is the default SSID (wireless network name) of the AirStation. You can find it on the bottom of the AirStation. You may also wish to contact your ISP to ask if other information, such as global IP address, subnet mask address, default gateway address, DNS server address, or PPPoE parameters, is necessary to access your internet connection. Write down any necessary information that your ISP requires for connection. Buffalo recommends using a wired network connection, where your computer is physically connected to the AirStation with a CAT5 straight cable plugged into one of the four LAN ports, to initially set up your router. This type of setup will eliminate possible setup problems with the wireless adapter on the computer being used to configure the AirStation. The computer used to configure the AirStation should be set to obtain an IP address automatically using a DHCP server. The WZR-AG300NH has a default LAN IP address of 192.168.11.1 and Subnet Mask of 255.255.255.0.
Connecting your AirStation 1. Power down the Cable or DSL modem and the computer which will be used to configure the AirStation router. 2. Plug the Cable or DSLs LAN Ethernet cable into the AirStations WAN port. Initially, you may need to unplug this cable from your computer, hub or other router. 3. Plug the provided Ethernet cable into a LAN port on the AirStation and plug the other end into your computers Ethernet adapter (NIC). If you plan to initially configure the AirStation wirelessly (not recommended), you may skip this step. 4. Power on your cable or DSL modem and wait one full minute, then power on the AirStation router and wait one full minute, and finally power on the computer which will be used to configure the AirStation. If the red DIAG light on the AirStation is lit or flashing after several minutes of being powered on, please consult Buffalo Technology Technical Support.
Log in to the Configuration Tool Launch a web browser on the computer that youre going to use to configure the AirStation. Enter 192.168.11.1 into the URL field. Naturally, if you change your AirStations IP address, youll have to enter the new address instead. A window will open, prompting you to enter a User ID and Password. Enter root as the User name and leave the password field blank.
Detecting Your Broadband Connection Your AirStations SmartRouter technology will determine the type of internet connection you have automatically, and ask you for any needed information. If your ISP assigns IPs automatically (most cable providers do), their DHCP server will give your router an IP address. If additional login information is required to connect to the internet, the wizard will ask for it. Enter any required login information if asked. Contact your DSL provider for any missing login information. If your DSL provider requires that PPPoE information be entered manually, see page 25. 10 Home This is the opening page of your AirStations configuration tool. You can always get to it from within the configuration screens by clicking on Home. From here, you can configure port mapping for your internet games, turn on UPnP for Windows (MSN) Messenger, configure your Firewall, setup Encryption, choose your Wireless channel, update your AirStations firmware, and reset your Internet connections configuration. As you explore the configuration tool, you can usually get context sensitive help by clicking on the Help link at the top right of the page. To go to Advanced Settings (page 25), click on the Advanced tab. To get the system information you need to set up a wireless client that doesnt support AOSS, click on the System Info tab. See page 17 for more on Home. 11 AOSS AOSS AOSS (AirStation One-Touch Secure System) is a simple system for configuring your wireless network securely. If your router and your client device are installed and both support AOSS, then making a secure wireless connection between them is very easy. Push the AOSS button on the top of your router and hold it in for a few seconds. The AOSS light will begin to flash amber. You now have two minutes to push the AOSS button on your client device and finish the connection. If you have a standalone client device, it will probably have a little red button labled AOSS on it. Push the button!
About 15 seconds later, youll have a secure network connection. If your client device is a PC card, CardBus, or PCI adaptor, the AOSS button will probably be in its Client Manager Software. Check your client devices user manual for instructions on where to push or click the AOSS button. After youve pressed both buttons, it will take about 15 seconds for the connection to complete. When its finished, the AOSS light witll glow a solid amber. You now have a secure network connection!
standalone client device Client Manager Software PC card 1
AOSS Notes Some things to keep in mind with AOSS:
Only one AOSS wireless client adapter can be configured with the AOSS router at a time. The buttons will need to be re-pressed to connect each additional AOSS wireless client adapter. It is not necessary to AOSS client devices that have already been configured via AOSS, unless significant changes have been made to the wireless network. Do not attempt to configure two separate AOSS networks at the same time, as it may cause undesired configurations. If an undesired client has connected via AOSS, it can be disconnected from within the WZR-AG300NHs advanced configuration menus. 1
Router/Access Point Mode This AirStation supports quickly changing the product from a wireless router to a conventional access point. Put your Airstation into Access Point Mode by moving the switch on the bottom of your AirStation from AUTO to BRI. This changes the default IP address of the AirStation from 192.168.11.1 to 192.168.11.100, and DHCP, NAT, and the WAN port are disabled. Access Point Mode might be desirable if youre adding wireless capability to an existing network with a router, or configuring your AirStation as part of a bridge setup. It is not suitable for most home configurations. If you plan to use the AirStation as an normal wireless router, make sure that this switch is in the normal (AUTO) position!
To set up your AirStation as a bridge, flip the switch to BRI. 1
Manual Client Configuration If your wireless client doesnt support AOSS, youll have to configure it manually. From the Home page, click on the System Info tab. 1
System Info This page gives you all the information you might need to configure your non-AOSS wireless client. Probably youll just need the SSID, encryption type, and password. Consult your wireless clients documentation for more information on configuring it if necessary. You can get here from Home by clicking the System Info tab. 1
AirStation Configuration Tool (Home) When you first open your AirStation Configuration Tool, it will take you to Home
(see also page 11). From Home, you can configure port mapping for your internet games, set UPnP for Windows (MSN) Messenger, configure your firewall, setup encryption, choose your wireless channel, update your AirStations firmware, and reset your Internet Connections configuration. Clicking the Advanced tab gives you access to all of the AirStations configuration tools. You can get back to Home from anywhere in the management tool by clicking on the Home button at the top left of the screen. Lets begin exploring advanced settings by clicking on Internet Games (Port Mapping). 1
Internet Games (Port Mapping) Select any ports that need to be opened for your internet games to function correctly. Consult your games documentation for more information on what ports need to be configured. 1
Firewall/Intrusion Detector From this page, choose the level of firewall security you desire. You may also choose to have alerts sent to a different PC, if you like. Click Next when done to restart the router. Get to this page from Home by clicking on Firewall/Intrusion Detector. 1
Windows (MSN) Messinger/UPnP Windows (MSN) Messinger requires UPnP for proper operation. You may Enable UPnP here. UPnP may need to be configured on your PC as well. If you need to configure UPnP on your PC, the links at the bottom of the page have instructions for doing so on Windows ME and XP computers. Get to this page from Home by clicking on Windows (MSN) Messinger.
0 Wireless Encryption This page is available from Home by selecting Wireless Encryption. Here, you can manually select the type of wireless encryption youd like to use. Your AirStation supports three different encryption schemes; choose the best one that all your clients support. Virtually all wireless clients support WEP. Its a lot better than nothing. TKIP is much more secure than WEP, but slower. AES is even more secure than TKIP, and the fastest of all. Highly recommended if all of your wireless clients support it.
1 Wireless Channel This page is available from Home by selecting Wireless channel. With Auto Channel selected, your AirStation will choose the best channel available. Current channel will show the channel that your AirStation is currently using. You may also select any channel from 1-11 manually. This Draft-N router expands to use more channels then the channel selected. This happens automatically. This channel selection is to choose the primary channel. Buffalo Technology recommends leaving this settings set to Auto Channel unless you know a specific channel you want to place the AirStation on.
Firmware Update This page is available from Home by selecting Firmware update. Use Browse to select your firmware update file, and then click on Apply. Firmware update may take several minutes to complete. Dont power down your AirStation until the diag LED has gone out.
Internet Connection (Multisession Reset) From Home, selecting the Internet Connection Wizard (Multisession Reset) tab will begin the Internet Connection Wizard. The Internet Connection Wizard will only function correctly in simple networks, where your cable or DSL modem is plugged directly into your AirStations WAN port. If you have a complicated existing network that youre adding the AirStation to, see page 58.
Advanced Settings Advanced Settings lets you configure every element of your AirStation. Get to Advanced Settings from Home by clicking the Advanced Tab. You may return to Home by clicking on the yellow > Home link in the top left corner. Click Help in the top right corner for more information about any of the pages in Advanced Settings. To begin, click on WAN Config. The first page in WAN Config, WAN Port, will open.
WAN Config (WAN Port) Here, you may choose how the AirStation acquires an IP address. Normally, the internet connection wizard will set this for you if you have a cablemodem or DSL. If youre not sure what to choose, perform Easy Setup. To setup PPPoE manually, click on click here and turn to page 27. Also on this page, under Advanced Setup, you may manually set the Default Gateway, DNS server, WAN MAC address, WAN format, and WEB port number. Click Apply when finished.
PPPoE Many DSL connections require a PPPoE Connection in order to log in to an internet connection. Normally, the Easy Detection Wizard will help you configure that, but you may manually configure one here. Consult your ISP for more information on correctly configuring your PPPoE connection. To add a new PPPoE connection, click Edit Connection List. To choose your preferred connection, click on Edit Preferred Connection List.
LAN Config (LAN Port) Default for the LAN side IP address is 192.168.11.1. To add the AirStation to an existing LAN, specify a unique IPaddress, not used elsewhere in the network. The default Subnet Mask is 255.255.255.0. To connect AirStation to an existing LAN, specify the Subnet Mask that the LAN uses. If theres more than one DHCP server on a network, disable all but one of them. To have DHCP assign addresses from a specific range, enter a begining address by Assigned IP Address and give the number of addresses to assign in the Addresses box. To exclude specific addresses from being assigned by DHCP, specify them in the Excluded IP Address box. Multiple IP addresses may be specified by seperating them with a comma, e.g. 192.168.11.7,192.168.11.9. You can also specify an IP address range by start and end address connected by a dash, e.g. 192.168.11.15-192.168.11.21. The , and - can be used at the same time, e.g. 192.1 68.11.7,192.168.11.9,192.168.11.15-192.168.11.21, up to a total string length of 128 characters. Click the Help link in the top right corner for more information.
Advanced DHCP Settings This page offers the same DHCP settings as the previous one, and in addition, offers you the chance to change the Lease Period, De-
fault Gateway, DNS servers, WINS server, and Domain Name. Click Apply when you have the settings the way you want them. To manually assign an IP address, click Manual Assignment.
DHCP Server (Manual Assignment of IP Address) To manually link a LAN address to a MAC address, enter them under Add Client Infor-
mation and click Add. Current DHCP Client Information shows all LAN addresses currently assigned by AirStations DHCP. You may configure a specific client to always recieve the same IP address by clicking Manual Assignment to the right of its MAC Address. Clicking Delete returns a manually assigned client to normal DHCP operation. Edit allows you to manually adjust a linked IP Address and Mac Address in the Client Information window above.
0 Network Config (Route Info) By default, the AirStation receives RIP
(Route Information Protocol) information only from your local network, and doesnt broadcast RIP at all. For large, complicated network configurations, you may wish to modify this behavior. Click Apply when you have your desired configuration. Lower on the page, routing information is displayed. Click Edit Routing Information to add a new route manually.
1 Network Configuration (Edit Routing Information) To configure a route manually, enter its Destination Address and Gateway. Enter a maximum number of hops allowable in Metric and click Add.
NAT You may disable Network Address Translation and IPsec passthrough by unchecking the appropriate Enable boxes. If you have a DMZ, enter its IP address in the IP Address of DMZ box. Incoming packets containing no recognizable destination port information will be redirected to the DMZs IP address. Click Apply when done. To set a NAT table entry manually, click Edit NAT Table.
NAT (Manual Entry) From this page you may manually add entries into the Address Translation Table. Click Add New Group when each is complete.
IP Filter Your AirStation comes pre-configured with basic rules. You may choose which of these to use by clicking on Add/Delete Basic Rules and turning to page 36. To make a custom rule, click on Configure IP Filter (page 37).
IP Filter (Add/Delete Basic Rules) Get here by clicking on Add/Delete Basic Rules (see page 35). You may choose which of AirStations preconfigured basic rules are enabled or disabled. Active rules are displayed with a green background, and disabled rules are shown in red. Choose the rules you want to use by clicking under Operation. When your choices are complete, click on Initialize.
IP Filter (Configure IP Filter) Clicking on Configure IP Filter from the IP filter page (page 35) will bring you to this page, where you can make your own rules. Click Add Rule when you have each rule configured the way you want it.
Network Configuration (Intrusion Detector) To enable intrusion detector, choose Enable or Enable (Apply packet filter rules) from the Intrusion Detector drop-down box. If packet filter rules are applied, packets will be filtered with packet filter rules before Intrusion Detector is applied. Blocking IP spoofing blocks packets from devices using an IP address that is not their own. In the Threshold Value box, enter the number of times an event has to occur before you receive notification. To configure your email alerts, enter your email address and mail server information. You may make up a sender email address, such as alert@router.com. Alert emails will appear to come from this address. Intrusion detector also blocks unauthorized access attempts and suspicious traffic from WAN-side devices (the internet).
UPnP You may disable Universal Plug and Play functionality by unchecking Enable here. Note that Windows (MSN) Messenger will not function correctly with UPnP disabled.
AOSS Clicking Start AOSS Sequence has the same function as pushing the AOSS button on the router: it initiates the AOSS process. If all your clients support AOSS, its very simple to set them up. Press the AOSS button on the router, or the one on this page, and then push the AOSS button on the client device. Each client device will have to be set up seperately. Wait for each AOSS process to finish before starting the next one. Consult your client devices documentation for the location of its AOSS button.
0 802.11a (Basic) The SSID or network name can be changed by entering a custom SSID and pressing the Apply button.
1 802.11a (Advanced) If you have a mixed mode network, w i t h D r a f t - N , 8 0 2 . 1 1 a c l i e n t s , i t s recommended that you check 11n protection to ensure that slower 11a clients connect properly.
802.11a (Security) Buffalo recommends that you choose the strongest form of encryption thats supported by all your client devices. WEP is a lot better than nothing, and almost every wireless device ever made supports it. TKIP is slower than WEP but much more secure. AES is the most secure of all, and the quickest as well. Use it if you can. Setting the key renewal period too short can decrease network performance. By default, the AirStation broadcasts its SSID. This makes it easier for clients to connect to the AirStation. To disable broadcasting, uncheck this box. Privacy Seperator prevents wireless clients from being able to browse each others computers. Check Enable to turn it on.
802.11g (Basic) The SSID is the name of your wireless network. This is what youll see when performing a wireless scan or survey from a wireless client. You may change this to something easy to remember, like MYNETWORK. Channel Selection - You may find it necessary to change the AirStations channel to avoid interference with other 2.4 Ghz sources, such as cordless phones, neighboring Wi-Fi networks, baby monitors, etc. By default, the Auto Channel mode will attempt to locate the clearest channel possible. Channel Bonding modes are specific for Draft-N. The 20 MHz mode uses less available wireless bandwith, which results in less interference to other 2.4 GHz wireless devices as well as slower wireless transfer speeds. The 40 MHz mode uses more bandwith, resulting in potentially more interference but significantly more performance. Control Sideband instructs the AirStation to use channels towards the lower end of the spectrum or the higher end.
802.11g (Advanced) If you have a mixed mode network, with Draft-N, 802.11b and 802.11g clients, its recommended that you check 11n protection to ensure that slower 11b and 11g clients connect properly. Choosing Auto for Wireless mode lets Draft-N, 802.11b and 802.11g clients connect to the network. If you would prefer to allow only one of the modes to connect, you have those options as well.
802.11g (Security) Buffalo recommends that you choose the strongest form of encryption thats supported by all your client devices. WEP is a lot better than nothing, and almost every wireless device ever made supports it. TKIP is slower than WEP but much more secure. AES is the most secure of all, and the quickest as well. Use it if you can. Setting the key renewal period too short can decrease network performance. By default, the AirStation broadcasts its SSID. This makes it easier for clients to connect to the AirStation. To disable broadcasting, uncheck this box. Privacy Seperator prevents wireless clients from being able to browse each others computers. Check Enable to turn it on.
MAC Access Limit To setup a bridge between two or more wireless access points, select Enable and click on Apply.
MAC Access Limit (Edit Registration List) You may limit access to your wireless network to specific computers. Computers not listed on your MAC Registration List will not be able to connect to the network. If you enable this, click Edit Registration List to add MAC addresses to your registration list. Enter a MAC address and click Apply for each client thats going to be accessing the network.
Admin Configuration (Name/Password) Here, you can change your AirStations name on your network and the administrator password. The name of the administrator account is fixed as root. If you have many AirStations on your network, having clear, descriptive names for each can make them much easier to administrate.
Admin Config (Date/NTP) You may set the time and date on your AirStation by entering it manually, and then clicking Apply. You may also click Acquire Current Time from your PC to set time and date automatically to match the PC youre using to set it up. If you have an NTP time server on your network, Enable NTP functionality and enter your NTP Server Name. Choose how often you want time updated and click Apply. If youre setting time manually, youll need to select your Time Zone and click Apply.
0 Syslog Transfer If you have a syslog server on your network, you may send logs to it. Check Enable to have logs transferred. Enter the address of your Syslog Server, check the logs you want transferred, and click Apply.
1 Save/Load Configuration Once your AirStations configured the way you want it, you can save the configuration here. Youll need the current administrator password to restore the configuration from the backup file later. Click Help at the top right corner of the page for more information on backing up and recovering system configuration files.
Initialize/Reboot Click Restart Now to restart your AirStation. Click Initialize Now to restore your AirStation to factory defaults and restart it. You may also initialize your AirStation by holding down the Init button on the bottom of the router for 3 seconds.
Firmware Update Click Browse to select your firmware update file. Then, click the Firmware Update button to update firmware. Firmware Update may take several minutes to complete. Do not power down the router until Firmware Update is finished and the diag light on the front of the router has stopped blinking. When available, updated firmware may be downloaded from www.buffalotech.com.
System Information The System Information page lists all the setup information for your AirStation. It can be very handy for setting up clients that dont support AOSS.
Log Information Here you can choose what information gets logged and see recent log entries.
Packet Traffic Information Here, you can see the packets and errors for each of your networks.
Client Monitor Client Monitor shows you a list of all clients currently connected to the wireless network.
Ping Test To perform a Ping test, enter a target
(such as 192.168.11.2 or www. buffalotech.com) and click Execute. Successful pings return 64 bytes from . messages. If the ping returns Connection failed or other errors, something is preventing you from communicating successfully with your target.
Connecting to a Preexisting Network Add an AirStation without changing your existing LAN configuration 1. Set the AirStation into Access Point Mode by moving the switch on the bottom from AUTO to BRI. 2. Connect one of the AirStations LAN ports to an existing router or switch on your network. Nothing should be plugged into the WAN port. 3. Open LAN Settings - LAN Port Settings and configure the following settings:
IP Address =[192.168.11.1] (Specify an unused network address from the existing LAN.) Subnet Mask=[255.255.255.0] (Use the same Subnet Mask as the existing LAN.) DHCP Server Function=[Disable]
4. Restart PC.
0 Specifications For more information, FAQs, and updates, consult the AirStation website at http://www.buffalotech.com. WZR-AG300NH AirStation Specifications Physical Specifications Dimensions 8.1 x 7.0 x 2.0 in. (210 x 175 x 50mm) Weight 19.0 oz. lb. (540g) Temperature & Humidity Operation 0 to 40 C Maximum humidity 85%
Transit/Storage 0 to 40 C maximum humidity 85% (no condensation) Power Characteristics Power Supply: 100-240V AC Universal, 50/60 Hz Power Consumption about 10 Watts (Max)
1 Specifications Regulatory Information Wireless communication is often subject to local radio regulations. Although AirStation wireless networking products have been designed for operation in the license-free 2.4 GHz band, local radio regulations may impose limitations on the use of wireless communication equipment. Network Compatability Draft-N support built off of the Draft Specification 1.0 for 802.11n. IEEE802.11a/g/b Standard for Wireless LANs. Host Operating System Microsoft Windows 98SE/ME/NT4.0/2000/XP, Unix, Linux and MacOS Media Access Protocol Wired - CSMD/CD (Collision Detection) Wireless - CSMD/CA (Collision Avoidance) with Acknowledgment (ACK)
Specifications AirStation IEEE 802.11 Channel Sets The range of the wireless signal is related to the Transmit Rate of the wireless communication. Communications at a lower Transmit range may travel longer distances. Center Channel ID FCC 1 2412 2 2417 3 2422 4 2427 5 2432 6 2437 7 2442 8 2447 9 2452 10 2457 11 2462 11 default channel
Troubleshooting Common Problems Out of range, client cannot connect to the AirStation. Configuration mismatch, client cannot connect to the AirStation. Absence or conflict with the Client Driver. Conflict of another device with the AirStation hardware. LED Activity Monitoring LED activity helps identify problems. Power LED should be Green, Wireless LED should be Green if the line is active. If is it blinking Green, wireless communication is active. Ethernet LED should be Green (100Mbps) or Amber (10Mbps) while the communication is active. The Red Diag LED will flash during boot and firmware updates. DIAG LED Activity Unplug the power for three seconds. Plug the power back in to monitor the Diag LEDs during start-up.
Troubleshooting DIAG LED Activity Table DIAG LED Display Continuous Red Time Starting Red flash, 3 times Red flash, 4 times Starting Starting Description/Action RAM Error Red flash, 2 times Starting Flash ROM Error A problem on the wired LAN side A problem on the wireless LAN side LEDs Work But Client PC Cannot Connect to Network If the LEDs indicate that the network is working properly (Power LED is on, Transmit/
Receive LED blinks), check the TCP/IP settings of the network. Changing Client TCP/IP Settings in Windows Consult the LAN Administrator for correct TCP/IP settings. To add or change TCP/IP Settings:
1. On the Windows task bar, click Start. 2. Select Settings, then Control Panel. 3. Double-click on the Network icon to view Network Properties. 4. From the list of installed components, verify the TCP/IP => wireless LAN adapter protocol is installed.
Troubleshooting If the wireless adapter protocol is not yet installed, click the Add button and select the TCP/IP protocol from the list. Refer to Windows Help for more information. If the wireless adapter protocol is installed, select the protocol and click the Properties button. Verify that the parameters match the settings provided by your LAN Administrator. Make changes if necessary, and click OK. 5. If prompted, restart your computer. Other Problems Please refer to www.buffalotech.com for further reference materials.
Glossary 10BaseT: 802.3 based Ethernet network that uses UTP (Unshielded twisted pair) cable and a star topology. 10 Mbps data tansmission speed. 100BaseT: 802.3 based Ethernet network that uses UTP (Unshielded twisted pair) cable and a star topology. 100 Mbps data tansmission speed. 1000BaseT: 802.3 based Ethernet network that uses UTP (Unshielded twisted pair) cable and a star topology. 1000 Mbps data tansmission speed. 802.1x: The standard for wireless LAN authentication used between an AP and a client. 802.1x with EAP will initiate key handling. Access Point: A hardware device that acts as a communication hub for Clients (users of wireless devices) to connect to a wired LAN. Ad-Hoc Network: A network based on peer-to-peer communication rather than a router, switch, or hub. Bandwidth: The transmission capacity of a computer or a communication channel, usually stated in Megabits per second
(Mbps). Bridge: A device which forwards traffic between network segments with a common network layer address, based on data link layer information. Client: A PC, workstation, or other device that connects to a network wirelessly through an Access Point. Cross-Over Cable: A UTP cable that has its transmit and receive pair crossed to allow communications between two devices. Default Gateway: The IP Address of either the nearest router or server for the LAN.
Glossary Destination Address: The address portion of a packet that identifies the intended recipient station. DHCP (Dynamic Host Configuration Protocol): Based on BOOTP, it uses a pool of IP addresses, which it assigns to each device connected to it, and retrieves the address when the device becomes dormant for a period of time. DNS (Domain Name System): System used to map readable machine names into IP addresses. Driver: Software that interfaces a computer with a specific hardware device. Dynamic IP Address: An IP address that is automatically assigned to a client station in a TCP/IP network, typically by a DHCP server. Ethernet: The most widely used architecture for Local Area Networks
(LANs). It is a shared-media network architecture. The IEEE 802.3 standard details its functionality. Ethernet cable: A wire similar to telephone cable that carries signals between Ethernet devices. It is designed to connect a single devices NIC to a router, switch, or hub. See also Crossover cable. File and Print Sharing: A Microsoft application that allows computers on a network to share files and printers. Firmware: Computer programming instructions that are stored in a read-
only memory unit rather than being implemented through software. Frame: A fixed block of data, transmitted as a single entity. Also referred to as a packet.
Glossary Full-Duplex: To transmit on the same channel in both directions simultaneously. Half-duplex: To transmit on the same channel in both directions, one direction at a time. Hub: A device which allows connection of computers and other devices to form a LAN. IEEE (Institute of Electrical and Electronics Engineers): The professional organization which promotes development of electronics technology. IP (Internet Protocol) Address: A unique 32-binary-digit number that identifies each sender or receiver of information sent in packets. Infrastructure: A wireless network or other small network in which the wireless network devices are made a part of the network through the Access Point. ISP (Internet Service Provider): A company that provides access to the Internet and other related services. IV (Initialization Vector): The header section of an encrypted message packet. LAN (Local Area Network): A group of computers and peripheral devices connected to share resources. LED (Light Emitting Diode): The lights on a hardware device representing the activity through the ports. MAC (Medium Access Control) Address:
The unique number that distinguishes every network interface card. Mbps (Mega Bits Per Second): A measurement of millions of bits per second. MDI/X (Media Dependent Interface/
Cross-over): Port on a network hub or switch that crosses the incoming transmit lines with the outgoing receive lines.
Glossary MHz (MegaHertz): One million cycles per second. NAT (Network Address Translation): An internet standard that enables a LAN to use one set of IP addresses for internal traffic and a second set for external traffic. NIC (Network Interface Card): An expansion card connected to a computer so the computer can be connected to a network. Packet: A block of data that is transferred as a single unit, also called a frame or a block. Packet Filtering: Discarding unwanted network traffic based on its originating address or its type. PCI (Peripheral Component Interconnect): A bus that is connected directly to the CPU. PCMCIA (Personal Computer Memory Card International Association) Card: Removable module that adds features to a portable computer. Peer-to-peer: This simple network is formed by connecting computers directly, without use of routers or hubs. A crossover cable is plugged into an Ethernet port in each computer, connecting them directly. Ping (Packet Internet Groper): An Internet utility used to determine whether a particular IP address is accessable. Plug and Play: Hardware that, once physically installed, finishes its installation automatically and may immediately be used, as opposed to hardware that requires further manual configuration. PoE (Power over Ethernet): A mechanism to send DC power to a device using a CAT5 Ethernet cable.
0 Glossary ROM (Read Only Memory): Memory hardware that allows fast access to permanently stored data but prevents addition to or modification of the data. Router: A device in a network that handles message transfer between computers. Similar to a hub, but with added functionality and efficiency. Roaming: The ability to use a wireless device while moving from one access point to another without losing the connection. Server: Any computer that makes files or peripheral devices available to users of the network and has a resident Network OS. SMTP (Simple Mail Transfer Protocol):
The protocol used to define and deliver electronic mail (E-mail) from one location to another. PPPoE (Point-to-Point Protocol over Ethernet): A specification for connecting users on an Ethernet line to the Internet through a common broadband medium. Protocol: A standard way of exchanging information between computers. RADIUS (Remote Authentication Dial In User Service): A server that issues authentication keys to clients. RAM (Random Access Memory): Non-
permanent memory. Repeater Hub: A device that collects, strengthens and transmits information to all connected devices, allowing the network to be extended to accommodate additional workstations. See also Bridge. RC4: The encryption algorithm used by WEP. RJ-45 connector: An 8-pin connector used between a twisted pair cable and a data transmission device.
1 Glossary Topology: The shape of a LAN (Local Area Network) or other communications system. Twisted Pair: Cable that comprises 2 or more pair of insulated wires twisted together. UDP (User Datagram Protocol): A communication method (protocol) that offers a limited amount of service when messages are exchanged between computers in a network. UDP is used as an alternative to TCP/IP. Uplink: Link to the next level up in a communication hierarchy. UTP (Unshielded Twisted Pair) cable:
Two or more unshielded wires twisted together to form a cable. WAN (Wide Area Network): A networking system covering a wide geographical area. SNMP (Simple Network Management Protocol: An application layer protocol that outlines the formal structure for communication among network devices. Static IP Address: A permanent IP address is assigned to a node in a TCP/IP network. Also known as global IP. STP (Shielded Twisted Pair): Twisted Pair cable wrapped in a metal sheath to provide extra protection from external interfering signals. Subnet Mask: An eight-byte address divided into 4 parts separated by periods. TCP/IP (Transmission Control Protocol/
Internet Protocol: Protocol used by computers when communicating across the Internet or Intranet. TKIP (Temporal Key Integrity Protocol):
An encryption method replacing WEP. TKIP uses random IV and frequent key exchanges.
Glossary VPN (Virtual Private Network): A security method to connect remote LAN users to a corporate LAN system. WEP (Wired Equivalent Privacy): A security protocol for wireless local area networks defined in the 802.11b standard, using a 64 bit or 128 bit key. WEP was designed to provide the same level of security as that of a wired LAN. However, it has been found that WEP is not as secure as once believed. Web Browser: A software program that allows viewing of web pages. Wi-Fi (Wireless Fidelity): An organization that tests and assures interoperability among WLAN devices. Wire Speed: The maximum speed at which a given packet can be transferred using Ethernet and Fast Ethernet standard specifications. WLAN (Wireless LAN): A LAN topology using wireless devices.
FCC / CE / R&TTE Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, (example - use only shielded interface cables when connecting to computer or peripheral devices). Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC / CE / R&TTE FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Europe EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of compliance with the R&TTE Directive 1999/5/EC:
EN 60950: 2000 Safety of Information Technology Equipment EN 300 328-2 V1.2.1 (2001-12) Technical requirements for spread-spectrum radio equipment EN 301 489-17 V1.1.1 (2000-09) EMC requirements for spread-spectrum radio equipment
FCC / CE / R&TTE Safety This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this manual and of the computer manufacturer must therefore be allowed at all times to ensure the safe use of the equipment. Intended use This device is a 2.4 GHz and 5 GHz wireless LAN transceiver, intended for indoor home and office use in USA, Canada, all EU and EFTA member states. EU Countries intended for use This device is intended for indoor Home and office use in the following countries:
Austria, Belgium, Germany, Denmark, Spain, Greece, France, Finland, Italy, Ireland, Luxembourg, The Netherlands, Portugal, Sweden, United Kingdom, Cyprus, Czech Republic, Estonia, Hungry, Latvia, Lithuania, Malta, Poland, Slovak Republic and Slovenia. The device is also authorised for use in all EFTA member states Iceland, Liechtenstein, Norway and Switzerland.
FCC / CE / R&TTE EU countries not intended for use None Potential restrictive use This device is a 2.4 GHz and 5 GHz wireless LAN transceiver, intended for indoor home and office use in all EU and EFTA member states, except in France, Belgium and Italy where restrictive use applies. In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain an authorization to use the device for setting up outdoor radio links. In Belgium there is a restriction in outdoor use. The frequency range in which outdoor operation in Belgium is permitted is 2460 2483.5 MHz. In France only channels 10,11,12 and 13 are available. This device may not be used for setting up outdoor radio links in France. For more information see http://www.anfr.fr/ and/or http://www.art-telecom.fr
Warranty Information Buffalo Technology (Melco Inc.) products come with a two-year limited warranty from the date of purchase. Buffalo Technology (Melco Inc.) warrants to the original purchaser the product; good operating condition for the warranty period. This warranty does not include non-Buffalo Technology (Melco Inc.) installed components. If the Buffalo product malfunctions during the warranty period, Buffalo Technology/(Melco Inc.) will, replace the unit, provided the unit has not been subjected to misuse, abuse, or non-Buffalo Technology/(Melco Inc.) authorized alteration, modifications or repair. All expressed and implied warranties for the Buffalo Technology (Melco Inc) product line including, but not limited to, the warranties of merchantability and fitness of a particular purpose are limited in duration to the above period. Under no circumstances shall Buffalo Technology/(Melco Inc.) be liable in any way to the user for damages, including any lost profits, lost savings or other incidental or consequential damages arising out of the use of, or inability to use the Buffalo products. In no event shall Buffalo Technology/(Melco Inc.) liability exceed the price paid for the prod-
uct from direct, indirect, special, incidental, or consequential damages resulting from the use of the product, its accompanying software, or its documentation. Buffalo Technology
(Melco Inc.) does not offer refunds for any product.
@ 2003-2006 Buffalo Technology (Melco, Inc.)
Contact Information Buffalo Technology (USA), Inc. 4030 West Braker Lane, Suite 120 Austin, TX 78759-5319 GENERAL INQUIRIES Monday through Friday 8:30am-5:30pm CST Direct: 512-794-8533 | Toll-free: 800-456-9799 | Fax: 512-794-8520 | Email:
sales@buffalotech.com TECHNICAL SUPPORT North American Technical Support by phone is available 24 hours a day, 7 days a week.
(USA and Canada). Toll-free: (866) 752-6210 | Email: info@buffalotech.com
Contact Information Buffalo Technology (Europe), Inc. 176 Buckingham Avenue, Slough, Berkshire, SL1 4RD United Kingdom GENERAL INQUIRIES Email: sales@buffalo-technology.com TECHNICAL SUPPORT Technical Support in Europe is available between the hours of 9am-6pm (GMT) Monday to Thursday and 9am-4:30pm (GMT) Friday for this product. Customers in Europe can obtain Technical Support using the following information:
E-mail: helpdesk@buffalo-technology.ie | Web: www.buffalo-technology.com
0
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2007-01-09 | 5190 ~ 5230 | NII - Unlicensed National Information Infrastructure TX | Original Equipment |
2 | 2422 ~ 2452 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2007-01-09
|
||||
1 2 | Applicant's complete, legal business name |
BUFFALO INC.
|
||||
1 2 | FCC Registration Number (FRN) |
0005866322
|
||||
1 2 | Physical Address |
AKAMONDORI Bldg., 30-20, Ohsu 3-chome, Naka-ku
|
||||
1 2 |
Nagoya, N/A 460-8315
|
|||||
1 2 |
Japan
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
b******@baclcorp.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
FDI
|
||||
1 2 | Equipment Product Code |
09101479-0
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
M**** I****
|
||||
1 2 | Title |
General Manager
|
||||
1 2 | Telephone Number |
81(50********
|
||||
1 2 | Fax Number |
81(50********
|
||||
1 2 |
i******@melcoinc.co.jp
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
1 2 | DTS - Digital Transmission System | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Draft 802.11n + 802.11b/g/a Wireless Router | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power listed is the combined Conducted output power. Device is a wireless router operating in 2x3 or 2x2 spatial multiplexing MIMO configuration as described in this filing. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-user must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Bay Area Compliance Laboratory
|
||||
1 2 | Name |
J****** C********
|
||||
1 2 | Telephone Number |
408-7********
|
||||
1 2 | Fax Number |
408-7********
|
||||
1 2 |
b******@baclcorp.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | CC MO | 5180 | 5240 | 0.0485 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15E | CC MO | 5190 | 5230 | 0.0495 | |||||||||||||||||||||||||||||||||||
1 | 3 | 15E | CC MO | 5180 | 5240 | 0.0476 | |||||||||||||||||||||||||||||||||||
1 | 4 | 15E | CC MO | 5190 | 5230 | 0.0488 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC MO | 2412 | 2462 | 0.1698 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15C | CC MO | 2422 | 2452 | 0.1871 | |||||||||||||||||||||||||||||||||||
2 | 3 | 15C | CC MO | 2412 | 2462 | 0.1637 | |||||||||||||||||||||||||||||||||||
2 | 4 | 15C | CC MO | 2422 | 2452 | 0.1426 | |||||||||||||||||||||||||||||||||||
2 | 5 | 15C | CC MO | 2412 | 2462 | 0.1803 | |||||||||||||||||||||||||||||||||||
2 | 6 | 15C | CC MO | 2422 | 2452 | 0.1343 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC