HDW-P500U3 Installation Guide 0 Table of Contents Overview.......................................2 Requirements................................................................3-4 Section I ................................5-8 Connecting to the HDW-P500U3 .................5-8 Section II......................................................................9-19 Playing Music.......................................................10 Playing Video.......................................................11 Viewing Photos...............................................12-13 Uploading Photos/Videos....................................14 Downloading Files..........................................15-16 Create/Copy/Move Files & Folders..................17-19 Section III...................................20-23 Connecting to HDW-P500U3 Using Computer.20-21 Mounting the Hard Drive.......................................22-23 Section IV...................................................................24-25 Accessing the HDW-P500U3 GUI........................24-25 1 Overview Supported File Formats for iPhone/iPad app:
1. Video m4v, mp4, mov (using H.264 or Mpeg-4 codec only and must be DRM free) 2. Audio AAC (NO-DRM), AIFF, Apple Lossless, Mp3, WAV 3. Pictures (Viewable Only) JPG, BMP, TIF, PNG, and GIF 4. Documents (Viewable Only) ppt (Power point), xls (Excel), .docx or .doc
(Word), pdf 2 Requirements The following procedures are instructions on how to establish a connection with the HDW-P500U3. Please make sure you have the following requirements. Hardware Requirements PC or Mac computer with USB 3.0/2.0 port (For Samba sharing, file transfer, or to access the HDW-P500U3 Connect user interface) iPhone (3G or better), iPad (1 or better) or iPod Touch
(2nd generation or better) Android device and Tablet NTFS formatted 2.5 inch hard drive 3 Requirements Software Requirements Windows XP/Vista/7 or higher Mac OSX 10.5 or higher HDW-P500U3 Connect application for IOS (IOS 4.0 or higher) HDW-P500U3 Connect application for Android
(Android phone 2.3 or 3.0 for tablets) Web browser to access the User Interface (IE 6 or better, Firefox 3 or better, or Safari 4 or better) 4 Section I Connecting to the HDW-P500U3 using an iPhone, iPod Touch or iPad 1. Press the Settings button on your device. 2. Select the General tab. 3. Select the Wi-Fi tab. Your device will be searching for any wireless hotspot within in range (See screenshot below). 5 Section I 4. Select the hotspot called WiFi DAS. 6 Section I 5. Make sure an IP address has been assigned
(10.10.10.xxx) 6. Once the connection is established, launch the HDW-P500U3 Connect iOS application. This App can be downloaded App store. 7 Section I 7. Once you have open the application you will be able to browse the HDW-P500U3. 8 Section II Navigating the HDW-P500U3 Connect Application The following is a description of the icons that appears in the home screen:
WiFi DAS This is where you can view files that are in the HDW-P500U3. MyDevice This folder contains files that were downloaded from the HDW-P500U3 to your phone or tablet. Upload This is where you can upload from your phone or tablet to the HDW-P500U3. At the moment you can only upload pictures or videos that are in your devices photo library. Download- This is where you can download files from the HDW-P500U3 and store them to your phone or tablet. Settings- This is where you can change the settings for the HDW-P500U3. 9 Section II Playing Music 1. Select the audio file that you wish to play. 2. Once the song begins to play the music player will appear. 3. Select the Back button if you wish to return to the main 10 Section II Playing Video 1. Select the video file that you wish to play. 2. Once the video has been selected it will need to load. 3. Once the video finishes loading it will start playing 11 Section II Viewing Photos 1. Select the photo you wish to view. 2. Once you have selected the photo the picture viewer will start. Pressing the Play button will begin the slideshow 12 Section II The slide show settings can be changed by pressing the Settings tab on the main screen. 13 Section II Uploading photos/video to HDW-P500U3 1. Select the upload tab. 2. The upload screen will then appear. 3. Press the + button. 4. Select the files that you wish to upload to the HDW-P500U3. Once the files have been chosen, press the upload button. This should start the upload process to the HDW-P500U3. 14 Section II Downloading files from HDW-P500U3 to your phone or tablet 1. Select the download tab. 2. The download screen will then appear. 3. Press the + button. 4. Select the files that you wish to download from HDW-P500U3. Once the files have been chosen, press the download button. This should start the download process from HDW-P500U3 to your device 15 Section II 5. Files that have been downloaded are located in the MyDevice folder. 16 Section II Create/Copy/Move Files or Folders 1. Select the MyDevice folder tab. 2. Select the edit tab. 3. You can now create a new folder, in order to move or copy files to. 17 Section II 4. In order to copy/move a file you will need to select the files. 5. Choose the files or folders that will be copied or moved. 6. Once the files have been chosen press the Done tab. 7. Select the new folder that was created. 18 Section II 8. Press the edit tab. A new screen will appear. 9. Press the paste tab. The files that were selected will now be copied/moved to the new folder. 19 Section III Connecting to the Wi-Fi Settings of Your Operating System 1. Navigate to the Wi-Fi settings of your operating system Window 7 20 Section III OSX 2. Select the hotspot called WiFi DAS. 3. Make sure an IP address has been assigned. 21 Section III Mounting the Hard Drive Once you have connected your computer to the WiFi DAS, the device should appear within your home network. If the device does not appear you will need to manually connect to it using the Samba commands. The following procedures are for OSX and Windows. OSX 1. Click on The Finder icon on your dock. 2. Navigate to the upper taskbar and select Go. 3. Click on Connect to Server. 4. In the Server Address space, type in smb://10.10.10.254 5. The system will prompt you for a username and password. Both the username and password are admin. 6. The drive will then mount on your desktop. 22 Section III Windows 1. Click on The Windows icon on your taskbar. 2. In the search programs and files box, type in
\\10.10.10.254 3. The system will prompt you for a username and password. Both the username and password are admin. 4. The drive will then mount under windows explorer. 23 Section IV Accessing the WiFi DAS GUI The HDW-P500U3 also includes a user interface that allows users to change certain settings such as; network security, SSID, passwords, Static IP address, etc. The following procedures work on both PC and Mac. 1. Open a web browser (IE, Firefox or Safari) 2. In the address bar type in the following:
http://10.10.10.254 24 Section IV 3. The system will prompt you for a username and password. Both the username and password are admin. 4. Once the username and password has been entered the following page will appear. 25 Appendix Specifications Wireless LAN Interface Standard Compliance Transmission Method Transmission Rate 802.11n/g/b Frequency Range Access Mode Security USB Interface Interface Connector Transfer speed Other Power Supply Power Consumption Dimensions Weight Operating Environment IEEE802.11n/g/b Direct Sequence Spread Spectrum (DSSS), OFDM 802.11n : 150Mbps Maximum 802.11g : 54Mbps Maximum 802.11b : 11Mbps Maximum 2,412 - 2,462 MHz (Channels 1 - 11) Infrastructure Mode, WDS AOSS, WPS, WPA2-PSK (TKIP/AES), WPA-PSK (TKIP/AES), 128/64bit WEP USB 3.0 (USB 2.0) Micro-B USB 3.0 : 5 Gbps Maximum USB 2.0 : 480 Mbps Maximum External AC 100 - 240 V Universal, 50/60 Hz DC 5 V 5 %
TBD 127 x 79 x 22 mm (5 x 3.2 x 0.9 in.) TBD TBD
- 1 -
Appendix Regulatory Compliance Information Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. SAR information: 0.263 W/kg (1g) CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. Important Note - FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0.5cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user.
- 2 -
Appendix Industry Canada statement:
Industrie Canada dclaration:
This Class B digital apparatus complies with Canadian ICES-003. This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Ce dispositif est conforme la norme CNR-210 dIndustrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes:
(1) le dispositif ne doit pas produire de brouillage prjudiciable, et
(2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Important Note - Radiation Exposure Statement:
Note Importante - Dclaration dexposition aux radiations:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0.5cm between the radiator and your body. This device has been designed to operate with an antenna having a maximum gain of [5] dB. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 0.5 cm de distance entre la source de rayonnement et votre corps. Ce dispositif a t conu pour fonctionner avec une antenne ayant un gain maximal de dB [5]. Une antenne gain plus lev est strictement interdite par les rglements dIndustrie Canada. Limpdance dantenne requise est de 50 ohms. Conformment la rglementation dIndustrie Canada, le prsent metteur radio peutfonctionner avec une antenne dun type et dun gain maximal (ou infrieur) approuv pourlmetteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique lintention des
- 3 -
Appendix autres utilisateurs, il faut choisir le type dantenne et son gain de sorte que lapuissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas lintensit ncessaire ltablissement dune communication satisfaisante. Europe EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC:
EN60950-1: 2006 +A11: 2009 Safety of Information Technology Equipment EN50385 : (2002-08) Product standard to demonstrate the compliance of radio base stations and fixed terminal stations for wireless telecommunication systems with the basic restrictions or the reference levels related to human exposure to radio frequency electromagnetic fields (110MHz - 40 GHz) - General public EN 300 328 V1.7.1: (2012-04) Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems;
Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive EN 301 489-1 V1.9.2: (2011-09) Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility
(EMC) standard for radio equipment and services; Part 1: Common technical requirements EN 301 489-17 V2.1.1 (2009-05) Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility
(EMC) standard for radio equipment; Part 17: Specific conditions for Broadband Data Transmission Systems EN 62209-2:2010: Part 2:
Procedure to determine the specific absorption rate (SAR) for mobile wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies. In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services.
- 4 -
Appendix This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France. esky [Czech]
Buffalo Technology Inc. tmto prohlauje, e tento HDW-P500U3 je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/ES. Dansk [Danish]
Undertegnede Buffalo Technology Inc. erklrer herved, at flgende udstyr HDW-P500U3 overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. Deutsch [German]
Hiermit erklrt Buffalo Technology Inc. dass sich das Gert HDW-P500U3 in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EG befindet. Eesti [Estonian]
Kesolevaga kinnitab Buffalo Technology Inc. seadme HDW-P500U3 vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. English Hereby, Buffalo Technology Inc. declares that this HDW-P500U3 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Espaol [Spanish]
Por medio de la presente Buffalo Technology Inc. declara que el HDW-P500U3 cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/
CE.
[Greek]
Buffalo Technology Inc. HDW-P500U3 1999/5/. Franais [French]
Par la prsente Buffalo Technology Inc. dclare que lappareil HDW-P500U3 est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
- 5 -
Appendix Italiano [Italian]
Con la presente Buffalo Technology Inc. dichiara che questo HDW-P500U3 conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Latviski [Latvian]
Ar o Buffalo Technology Inc. deklar, ka HDW-P500U3 atbilst Direktvas 1999/5/EK btiskajm prasbm un citiem ar to saisttajiem noteikumiem. Lietuvi [Lithuanian]
iuo Buffalo Technology Inc. deklaruoja, kad is HDW-P500U3 atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Nederlands [Dutch]
Hierbij verklaart Buffalo Technology Inc. dat het toestel HDW-P500U3 in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Malti[ Maltese]
Hawnhekk, Buffalo Technology Inc. , jiddikjara li dan HDW-P500U3 jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Magyar [Hungarian]
Alulrott, Buffalo Technology Inc. nyilatkozom, hogy a HDW-P500U3 megfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EC irnyelv egyb elrsainak. Polski [Polish]
Niniejszym Buffalo Technology Inc. owiadcza, e HDW-P500U3 jest zgodny z zasadniczymi wymogami oraz pozostaymi stosownymi postanowieniami Dyrektywy 1999/5/EC. Portugus [Portuguese]
Buffalo Technology Inc. declara que este HDW-P500U3 est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE. Slovensko [Slovenian]
Buffalo Technology Inc. izjavlja, da je ta HDW-P500U3 v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloili direktive 1999/5/ES. Slovensky [Slovak]
Buffalo Technology Inc. tmto vyhlasuje, e HDW-P500U3 spa zkladn poiadavky a vetky prslun ustanovenia Smernice 1999/5/ES. Suomi [Finnish]
Buffalo Technology Inc. vakuuttaa tten ett HDW-P500U3 tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen.
- 6 -
Appendix Svensk [Swedish]
Hrmed intygar Buffalo Technology Inc. att denna HDW-P500U3 str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. SAR information: 0.095 W/kg (10g) Safety This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this manual and of the computer manufacturer must therefore be allowed at all times to ensure the safe use of the equipment. NCC B
(B )
- 7 -