Quick Setup Guide WAP-001 11 b/g Wireless Broadband Router -
Package contents:
*Main Unit 1
"AC ADAPTER | 1
"LAN CABLE _ 1 Quick Setup Guide 1
-Warranty Statement 1 Layout:
oo i ROUTER ae Mode Select SeCRITY INTERNET/
STATUS indicator INTERNET/
LAN Connector Indicator:
This product indicates own status by two indicator. Functionality of LED are listed as below:
[WIRELESS/SECURITY]
WIRELESS 11b/g is available
| Indicator status SECURITY Indicator lights Green 11b/g transmit/receive the data Indicator blinks Green 11b/g is available Indicator lights Red 11b/g transmit/receive the data Indicator blinks Red
[INTERNET/STATUS]
Internet connection Diagnostic Indicator status Indicator blinksBlue connection is available system is normal Indicator off Indicator blinks Red connection is not available system is normal system has any issue Switch:
-RESET Switch When want to load the default setting value , this switch is pushed.
"AQSS (AirStation One-Touch Secure System) Switch When use the AOSS function,this switch is pushed.
-MODE (Router Bridge Auto) Secect Switch This switch selects function mode of this product. Technical Specifications:
Item | Contents Channel 1-11ch Total band _ 2412-2472MHz 0 ~+40C10 ~ 85%
WAP-002 Power Max 900mA (Peak 920mA/1ms) input voltage 4.6V 4.2W Weight | 135 g 13.8k 21 x 104.25 x 100 FCC INFORMATION :
Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: |
eReorient or relocate the receiving antenna. eIncrease the separation between the equipment and receiver. _ |
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. eConsult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. In accordance with FCC regulation, BUFFALO has limited the WAP-001 to operation on channels 1-11 by USA specific firmware. |
FCC Warning Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment should be installed and operated with at least 20cm and more between the radiator and persons body (excluding extremities: hands, wrists, feet and legs). This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.