| all | frequencies |
|
exhibits | applications |
|---|---|---|---|---|
| manual |
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 |
|
user manual | Users Manual | 849.61 KiB | May 02 2009 | |||
| 1 | ID Label/Location Info | native | ||||||
| 1 | Cover Letter(s) | May 02 2009 | ||||||
| 1 | Cover Letter(s) | May 02 2009 | ||||||
| 1 | Internal Photos | November 02 2009 | ||||||
| 1 | Internal Photos | November 02 2009 | ||||||
| 1 | Internal Photos | November 02 2009 | ||||||
| 1 | Internal Photos | November 02 2009 | ||||||
| 1 | Internal Photos | November 02 2009 | ||||||
| 1 | External Photos | native | ||||||
| 1 | Test Setup Photos | native | ||||||
| 1 | Test Report |
| 1 | user manual | Users Manual | 849.61 KiB | May 02 2009 |
PROTOTYPE!
USER MANUAL GAS TRAINER USER MANUAL Gas Trainer BullEx Index:
1. General description ........................................................................................................... 4 2. Technical Specifications .................................................................................................... 5 3. Use.................................................................................................................................... 6 3.1 Transmitters................................................................................................................. 6 Positioning .................................................................................................................. 6 Operation.................................................................................................................... 7 Switching on ............................................................................................................... 7 Field Strength ............................................................................................................. 7 Switching off ............................................................................................................... 7 Charging..................................................................................................................... 8 3.2 Student Unit ................................................................................................................. 9 Operation.................................................................................................................... 9 Switching on ............................................................................................................... 9 Measuring..................................................................................................................10 Taking measurements using an external measuring probe ........................................10 Maximum and minimum measured values .................................................................11 Switching off ..............................................................................................................11 Battery level indicator.................................................................................................12 Charging....................................................................................................................12 3.3 Instructor Unit .............................................................................................................13 Operation...................................................................................................................13 Switching on ..............................................................................................................13 Maximum and minimum measured values .................................................................14 Adjusting values manually .........................................................................................15 Setting Alarm values A1.............................................................................................15 Setting Alarm values A2.............................................................................................16 Setting Transmitter mode...........................................................................................16 Switching off ..............................................................................................................17 Battery level indicator.................................................................................................17 figure 3.15: Battery indicators. ..................................................................................17 Charging....................................................................................................................17 4. Channel and language setup............................................................................................18 Entering setup menu on the Instructor Unit ................................................................18 Leaving setup menu on the Instructor Unit.................................................................18 Accepting or declining settings on the Student Unit ...................................................20 5. Inspection and maintenance.............................................................................................21 6. Precautions and safety instructions ..................................................................................22 7. Guarantee ........................................................................................................................22 8. Frequently asked questions..............................................................................................23 Gas Trainer is an exclusive product of:
BullEx Digital Safety 105 Jordan Road Troy, NY 12180 USA Toll-free: 1-888-4BULLEX Phone: 518-689-2023 Fax:
518-689-2034 http://www.bullexsafety.com PROTOTYPE!
Bullex_Gas_trainer_V1_0.doc revision: 1.0 Author: SK Date:
Page 3 of 23 2009-01-05 USER MANUAL Gas Trainer BullEx 1. General description The Gas Trainer has been specially developed to safely simulate situations where the use of a four gas meter needs to be trained. No use is made of real gases; instead, transmitters
(electronic beacons) are used to simulate a cloud of gas. As the transmitters are equipped with a field strength regulator, it is possible to simulate both large and small clouds of gas. The system is capable of simulating four different types of gas:
- explosive gas (%LEL)
- Oxygen (O2)
- Hydrogen Sulfide (H2S)
- Carbon Monoxide (CO) The trainees gas meter (Student Unit) measures the strength of the signal of the transmitters, thus simulating one of the four gases (selectable). An alarm sounds if the measured value exceeds the preset alarm value. Per gas type, two alarm levels can be set by the Instructor. The instructor also receives an alarm signal if one of the alarm values is exceeded. One gas type (user selectable on the Instructor Unit) will be simulated by the transmitters, the other three gases can be adjusted on the Instructor Unit. The Student Unit and Instructor Unit communicate with each other using a wireless link. The Student Unit will always follow the Instructor Units settings for the three gases that are not simulated by the transmitters. The set consists of:
1 Gas Trainer Instructor Unit 1 Gas Trainer Student Unit 3 Gas Trainer transmitters 1 Gas Trainer measuring probe 1 AC/DC Power Supply 1 DC Power splitter cable 1 User Manual PROTOTYPE!
Page 4 of 23 BullEx 2. Technical Specifications GAS TRAINER Transmitter Casing material:
Transmission point materials:
Range (high setting):
Range (low setting):
Battery:
Length of wires:
Dimensions of transmission points:
Dimensions of signal unit:
Weight:
GAS TRAINER Student/Instructor Unit Casing material:
Material of display window:
Display:
Alarm:
Max. distance from Instructor Unit:
Radio frequency:
Transmitting power:
Battery:
Usable life:
Dimensions:
Weight:
Measuring range:
USER MANUAL Gas Trainer Aluminum ABS, aluminum 8 meters (10% LEL) 5 meters (10% LEL) 7.2V / 700mAh NiMH Usable life:
approx. 20 hours (fully charged)*
approx. 50cm (base transmission point) approx. 100cm (transmission points) 53 x 30 x 25 mm 110 x 57 x 35 mm 390 grams ABS, PMMA Polycarbonate graphic 122 x 32 pixels, white/blue Optical and auditory:
- Slow and fast alarm, user configurable
- Low battery power approx. 35 meters in open space 914.5 MHz 1 mW 7.2V / 700mAh NiMH approx. 8 hours (fully charged)*
160 x 84 x 30 mm 270 grams
%LEL:
%O2:
ppm H2S:
ppm CO:
0 100 in steps of 1 0 25.5 in steps of 0.1 0 200 in steps of 1 0 500 in steps of 1 ABS 100 240V AC 50/60Hz 0.5A max 5 (using the splitter cable) max. 4 hours 120 grams GAS TRAINER Battery Charger Casing material:
Supply voltage:
Number of channels:
Charging time 700mAh battery:
Weight:
* New NiMH batteries need to be charged and used for a couple of times before they reach full capacity. Therefore, it is possible that usable life of the battery is significantly shorter in the first charge/use cycles. PROTOTYPE!
Page 5 of 23 BullEx 3. Use USER MANUAL Gas Trainer 3.1 Transmitters The transmitters form the source of the simulated cloud of gas. In order to control the size of the cloud of gas, all transmitters are equipped with a field strength regulator, allowing the range to be set. Positioning
- Position one or more transmitters in the area in which the gas cloud is to be simulated. The control unit can be positioned out of sight, and the much smaller transmission points can be positioned inconspicuously, as long as the Student Unit can receive information from the transmission points. The best effects are achieved when all three transmitters are positioned in such a way that they combine to form a circle within which the gas cloud can be detected
(figure 3.1). figure 3.1: Position the transmitters in a circle for the best results Page 6 of 23 PROTOTYPE!
USER MANUAL Gas Trainer BullEx Operation Controls and indicator on the transmitter (figure 3.2):
(1) Power indicator (Red)
(2) Charger indicator (Green)
(3) High setting (large gas cloud)
(4) Low setting (small gas cloud)
(5) Charging connector
(6) Power switch figure 3.2: Controls of the Transmitter Switching on
- Push the left-hand switch upwards (6). The power indicator (1) will flash, and the set signal will be emitted. Field Strength The transmitter has two different field strengths, to be able to make larger and smaller gas clouds. High field strength
- Push the right-hand switch upwards (3). The transmission points now have a range of approx. 8 meters (10% LEL) in an open space. The range is greatly dependent on reflections in the area. It is therefore possible for the range to vary in the vicinity of obstacles. Low field strength
- Push the right-hand switch downwards (4). The transmission points now have a range of approx. 5 meters (10% LEL) in an open space. The range is greatly dependent on reflections in the area. It is therefore possible for the range to vary in the vicinity of obstacles. Switching off
- Push the left-hand switch downwards (6). The indicator (6) will stop flashing, and the transmitter will stop emitting signals. PROTOTYPE!
Page 7 of 23 BullEx Charging USER MANUAL Gas Trainer
- Connect the transmitters charging connector (5) to the battery charger and plug the wall adaptor in the wall outlet. The transmitter will then be switched off electronically, irrespective of the position of the on-
off switch. The green charging indicator will start blinking. When the battery is full, the charging indicator lights continuously. When a battery is completely empty before recharging, the device will start a trickle charge cycle to prevent battery damage. The green charging indicator will immediately light continuously. Leave the charger connected, the charger will recover the battery in a safe way. After approximately four to six hours, the battery will be fully charged. A normal full charging cycle will take approximately 4 hours. The charging circuit continuously monitors the battery status and switches to trickle charge when the battery is fully charged. Generally speaking, it is sufficient to charge up all the transmitters at the same time as the Instructor Unit and Student Unit, to always have a working set. If the range of a transmitter becomes significantly weaker before the batteries of the Instructor Unit or Student Unit are empty, the battery power level is very low and must be charged up before continuing with the training. The transmitter is not equipped with a dedicated battery indicator. However, when the battery is empty, the power indicator will light continuously. The transmitter will not operate reliable anymore, the battery needs to be recharged. PROTOTYPE!
Page 8 of 23 BullEx USER MANUAL Gas Trainer 3.2 Student Unit Operation The Student Unit is operated by means of a single button, controlling all the functions of the gas meter. It features optical and auditory alarms and has the option of connecting a measuring probe. Connectors, controls and indicators of the Student Unit:
(1) Measuring sensor
(2) Measuring probe connector
(3) Optical alarm & charger indicator (front)
(4) Optical alarm (top)
(5) LCD Display
(6) Power button
(7) Charger connector Switching on
- Press the power button (6) briefly. The device will switch itself on and give a short optical signal (3,4) and a short beep. The device will start up and shortly show the BullEx logo on the display (5)
(figure 3.3). The device will then automatically switch to measuring mode. Four measurements are shown:
Lower Explosion Limit (%LEL) Oxygen (O2) Hydrogen Sulfide (H2S) Carbon Monoxide (CO) The wireless communication channel and internal battery level are shown on the right. figure 3.3: Controls of the Student Unit figure 3.4: Measuring mode display PROTOTYPE!
Page 9 of 23 BullEx Measuring USER MANUAL Gas Trainer
- Use the device to search for gases, as one would do with a normal gas meter. The meter will display a reading if the holder enters the area of range of a transmitter, or if the Instructor has manually changed a value. If one of the measurements exceeds the preset lowest alarm level A1, the meter will give a normal alarm signal; the optical alarms will flash in red and a sound will be emitted. If one of the measurements exceeds the preset highest alarm level A2, the meter will give a fast alarm signal; the optical alarms will flash fast in red and a faster sound will be emitted. The text of the gas causing the alarm will blink to indicate the cause of the alarm. An alarm will continue as long as one of the measurements is beyond the alarm limit. Taking measurements using an external measuring probe The supplied measuring probe can be used to take spot measurements. The built-in sensor is deactivated automatically when the probe is connected to the Student Units connector (2). Measurements are then only taken using the probe.
- Take the probe and connect the probes connector to the connector (2) of the Student Unit. PROTOTYPE!
Page 10 of 23 USER MANUAL Gas Trainer BullEx Maximum and minimum measured values Display maximum measured values
- Press the button briefly to show the maximum measured values on the display. The meter will show the maximum measured Values on the display (figure 3.5), and then automatically switch back to measuring mode after six seconds. figure 3.5: Maximum values display Delete maximum measured values
- When the maximum measured values are shown, press and hold the button for two seconds. The maximum measured values will be deleted. After six seconds, the Student Unit will automatically switch back to measuring mode. Display minimum measured Oxygen value
- Press the button twice (briefly) to show the minimum measured Oxygen value on the display. The meter will show the minimum measured Oxygen value on the display (figure 3.6), and then automatically switch back to measuring mode after six seconds. Delete minimum measured Oxygen value figure 3.6: Minimum values display
- When the minimum measured Oxygen value is shown, press and hold the button for two seconds. The minimum measured Oxygen value will be deleted. After six seconds, the Student Unit will automatically switch back to measuring mode. Switching off
- When in measuring mode, press and hold the button for four seconds, until the Bullex logo appears on the display. The device will give a brief signal (optical and auditory). When the button is released, the device will switch itself off. PROTOTYPE!
Page 11 of 23 USER MANUAL Gas Trainer BullEx Battery level indicator The battery level is shown in the bottom right corner of the display. Figure 3.7 explains the meanings of the symbols. When the battery is empty, the device gives two short signals
(optical and acoustic) every 30 seconds to indicate that the battery needs to be recharged. Finish the training exercise, and then recharge the unit. If the battery power becomes too low, the device will switch itself off automatically, in order to prevent damage to the battery. Battery fully charged. Battery half charged. No need to recharge yet. Battery power low. figure 3.7: Battery indicators. Charging in the wall outlet.
- Connect units charger connector (7) to the battery charger and plug the wall adaptor If the device was powered on, it will be switched off electronically. The front green charging indicator (3) will start blinking. When the battery is full, the charging indicator lights continuously. When a battery is completely empty before recharging, the device will start a trickle charge cycle to prevent battery damage. The green charging indicator will immediately light continuously. Leave the charger connected, the charger will recover the battery in a safe way. After approximately four to six hours, the battery will be fully charged. A normal full charging cycle will take approximately 4 hours. The charging circuit continuously monitors the battery status and switches to trickle charge when the battery is fully charged. PROTOTYPE!
Page 12 of 23 BullEx USER MANUAL Gas Trainer 3.3 Instructor Unit Operation The Instructor Unit is operated by means of four buttons. It features the same optical and auditory alarms as the Student Unit does. Almost all settings of the system are made via the Instructor Unit, which sends these to the Student Unit via a wireless link. Connector, controls and indicators of the Instructor Unit:
(1) Optical alarm and charger indicator (front)
(2) Optical alarm (top)
(3) LCD Display
(4) Power button
(5) Charger connector
(6) Mode button
(7) Up button
(8) Down button Switching on figure 3.8: Controls of the Instructor Unit
- Press the Power button (4) briefly. The device will switch itself on and give a short optical signal (3,4) and a short beep. The device will start up and shortly show the Bullex logo on the display (5) (figure 3.8). The device will then automatically switch to measuring mode. Four measurements are shown:
Lower Explosion Limit (%LEL) Oxygen (O2) Hydrogen Sulfide (H2S) Carbon Monoxide (CO) figure 3.9: Measuring mode display The transmitter symbol (shown at %LEL in figure 3.9) shows which measurement is responding on the transmitters. The arrow symbol (shown at %O2 in figure 3.9) shows which measurement is currently selected to be adjustable manually using the up and down buttons. The wireless communication channel and internal battery level are shown on the right. The Instructor Unit will continuously search for a Student Unit at the selected channel. If a Student Unit is present, the puppet symbol will show on the left side of the display. The battery under the puppet symbol gives information about the Student Units battery level. If no Student unit is present, both the puppet symbol and the left battery symbol are not shown. PROTOTYPE!
Page 13 of 23 BullEx Maximum and minimum measured values Display maximum measured values USER MANUAL Gas Trainer
- Press the button briefly to show the maximum measured values on the display. The meter will show the maximum measured values on the display (figure 3.10), and then automatically switch back to measuring mode after six seconds. figure 3.10: Maximum values display Delete maximum measured values
- When the maximum measured values are shown, press and hold the button for two seconds. The maximum measured values will be deleted. After six seconds, the Student Unit will automatically switch back to measuring mode. Display minimum measured Oxygen value
- Press the button twice (briefly) to show the minimum measured Oxygen value on the display. The meter will show the minimum measured Oxygen value on the display (figure 3.11), and then automatically switch back to measuring mode after six seconds. figure 3.11: Minimum values display Delete minimum measured Oxygen value
- When the minimum measured Oxygen value is shown, press and hold the button for two seconds. The minimum measured Oxygen value will be deleted. After six seconds, the Student Unit will automatically switch back to measuring mode. PROTOTYPE!
Page 14 of 23 BullEx Adjusting values manually USER MANUAL Gas Trainer
- Press the mode button (6) shortly to point the arrow at the desired measurement After each press, the arrow will move to the next measurement. The measurement connected to the transmitters cannot be adjusted manually.
- Use the up (7) and down (8) buttons to adjust the level of the selected measurement to the desired level. The level will increase/decrease in full steps of the last digit; e.g. 10 11 %LEL or 20.9 21
%O2. Holding the up or down button will increase/decrease the number faster. Range The range of the four measurements:
%LEL:
%O2:
ppm H2S:
ppm CO:
0 100 in steps of 1 0 25.5 in steps of 0.1 0 200 in steps of 1 0 500 in steps of 1 Setting Alarm values A1 The display will show Set A1 and the values are the alarm levels for the preset lowest alarm levels. When one of the measured values
(or manually adjusted values in measuring mode) exceeds the preset values in this menu, both the Student Unit and the Instructor Unit will generate a slow alarm. See figure 3.12.
- Press and hold the mode button (6) for at least 2 seconds. figure 3.12: Set Alarm values A1
- Select the desired measurement by pressing the mode button (6) shortly After each press, the arrow will move to the next measurement.
- Use the up (7) and down (8) buttons to adjust the level of the selected measurement to the desired level. The range of the alarm levels is the same as for adjusting values manually.
- Press the mode button (6) shortly to select the next measurement. Or
- Press the power button (4) shortly to go back to measuring mode. PROTOTYPE!
Page 15 of 23 BullEx Setting Alarm values A2
- Press and hold the mode button (6) for at least 2 seconds. The device will show the Alarm values A1 menu.
- Press and hold the mode button (6) again for at least 2 seconds. USER MANUAL Gas Trainer The display will now show Set A2 and the values are the alarm levels for the preset highest alarm levels. When one of the measured values
(or manually adjusted values in measuring mode) exceeds the preset values in this menu, both the Student Unit and the Instructor Unit will generate a fast alarm. See figure 3.13. figure 3.13: Set Alarm values A2
- Select the desired measurement by pressing the mode button (6) shortly After each press, the arrow will move to the next measurement.
- Use the up (7) and down (8) buttons to adjust the level of the selected measurement to the desired level. The range of the alarm levels is the same as for adjusting values manually.
- Press the mode button (6) shortly to select the next measurement.
- Press the power button (4) shortly to go back to measuring mode. Or
- Press and hold the mode button (6) for at least 2 seconds.
- Press and hold the mode button (6) again for at least 2 seconds.
- Press and hold the mode button (6) again for at least 2 seconds. Setting Transmitter mode The device will show the Alarm values A1 menu. The device will show the Alarm values A2 menu. The display will now show Set Transmitter. See figure 3.14. The transmitter symbol in front Of %LEL indicates that the Student Units sensor signal is interpreted as %LEL. The other three measurements can be adjusted manually on the instructor unit. figure 3.14: Set Transmitter
- Select the desired measurement by pressing the mode button (6) shortly After each press, the transmitter symbol will move to the next measurement. When the desired measurement is selected:
- Press the power button (4) shortly to go back to measuring mode. PROTOTYPE!
Page 16 of 23 BullEx Switching off USER MANUAL Gas Trainer
- When in measuring mode, press and hold the button for four seconds, until the Bullex logo appears on the display. The device will give a brief signal (optical and auditory). When the button is released, the device will switch itself off. Battery level indicator The battery level is shown in the bottom right corner of the display. Figure 3.7 explains the meanings of the symbols. When the battery is empty, the device gives two short signals
(optical and acoustic) every 30 seconds to indicate that the battery needs to be recharged. Finish the training exercise, and then recharge the unit. If the battery power becomes too low, the device will switch itself off automatically, in order to prevent damage to the battery. Battery fully charged. Battery half charged. No need to recharge yet. Battery power low. figure 3.15: Battery indicators. Charging in the wall outlet.
- Connect units charger connector (7) to the battery charger and plug the wall adaptor If the device was powered on, it will be switched off electronically. The front green charging indicator (3) will start blinking. When the battery is full, the charging indicator lights continuously. When a battery is completely empty before recharging, the device will start a trickle charge cycle to prevent battery damage. The green charging indicator will immediately light continuously. Leave the charger connected, the charger will recover the battery in a safe way. After approximately four to six hours, the battery will be fully charged. A normal full charging cycle will take approximately 4 hours. The charging circuit continuously monitors the battery status and switches to trickle charge when the battery is fully charged. PROTOTYPE!
Page 17 of 23 USER MANUAL Gas Trainer BullEx 4. Channel and language setup In order to use more than one set in the same area, the Gas Trainer set has eight different channels. Please note that these are so called software channels; every channel uses the same radio frequency using different Device IDs. Therefore, using more than one set in the same area might result in a slightly slower response between Instructor Unit and Student Unit. The Gas Trainer set allows the user to set the language for indicating the explosive gas measurement. These options are available from the setup menu:
%LEL
%LIE
%UEG All settings are made on the Instructor Unit, and are then transmitted to the Student Unit. All Student Units within the reach of the wireless link will receive the settings, even if they are on a different channel. Upon reception of these settings, a Student Unit will ask the user to accept (press and hold the power button) or decline (press the power button shortly) these settings. Be sure to set up the settings correctly before accepting or declining them on the Student Unit. A Student Unit will only ask for confirmation once. If a user accidentally makes the wrong decision (e.g. declining instead of accepting), then leave the Instructor Unit in setup mode and switch the Student Unit off and on. The Student Unit will then ask for confirmation again. Entering setup menu on the Instructor Unit
- Be sure that the Instructor Unit is switched off.
- Press and hold the mode button.
- With the mode button pressed, switch the device on.
- Release the mode button. The setup menu will appear on the display.
- Use the mode button to switch between language and channel.
- Use the up and down buttons to change the value.
- Leave the Instructor Unit in setup mode until you have confirmed the settings on the Student Unit Leaving setup menu on the Instructor Unit After the settings have been accepted or declined on the Student Unit (see next page), the user can leave the setup menu and go back to measurement mode.
- Leave the setup menu on the Instructor Unit by pressing and holding the power figure 4.1: Setup menu on Instructor Unit button. The device will shortly show the BullEx logo and then return to measurement mode. PROTOTYPE!
Page 18 of 23 BullEx USER MANUAL Gas Trainer PROTOTYPE!
Page 19 of 23 USER MANUAL Gas Trainer BullEx Accepting or declining settings on the Student Unit Whenever a Student Unit receives setup information from any Instructor Unit in the neighborhood, the Student Unit will ask for confirmation by showing a settings menu on the display (figure 4.2). Since all Student Units in the neighborhood will receive this information, the user can either accept or decline these settings. The user can accept the settings by pressing and holding the power button on the Student Unit:
figure 4.2: Setup menu on Student Unit
- Be sure that the Student Unit is switched on and that you see the settings display
- Press and hold the power button until the Student Unit goes into measurement mode The Student Unit now stores the received settings. The user can decline the settings by pressing the power button shortly on the Student Unit:
- Be sure that the Student Unit is switched on and that you see the settings display
- Press the power button shortly until the Student Unit goes into measurement mode The Student Unit doesnt store the received settings and continues with the current settings. PROTOTYPE!
Page 20 of 23 BullEx 5. Inspection and maintenance In order to ensure trouble-free training sessions, we recommended that you regularly carry out the following checks, preferably before every training session:
USER MANUAL Gas Trainer Inspect the system for damage to the casing or cables. Do not use the system if the cables are damaged or if the casing is damaged to such an extent that one could expect the system not to function properly or to pose a potential safety risk to the student or instructor. In that case, contact the manufacturer and have the system repaired. Check the proper functioning of the system. Switch on one transmitter, and use the Student Unit to check that it is working properly. At the same time, check whether the measured value is being sent to the Instructor Unit. Then do the same for the other transmitters. Make sure that the system is adequately charged when starting a training exercise. Low battery power can give rise to unwelcome training interruptions. The usable lifetime of the batteries is limited. An average battery will last for 1 to 2 years. If the length of time that one can work with the unit on a fully charged battery diminishes noticeably, then we recommend that you have the batteries replaced. In order to get maximum benefit from the system, we recommend that all the batteries are replaced at the same time. The batteries will also last longer if you use the system regularly, and regularly recharge the batteries. If the system is not used for a period of one month or longer, you should completely charge the set before using it. PROTOTYPE!
Page 21 of 23 BullEx 6. Precautions and safety instructions The Gas Trainer system is a simulation system. For reasons of safety, the system does not detect gas but ultrasonic signals. The system therefore cannot be used as a real gas meter. Do not use the system in an environment in which you suspect that there may actually be a potentially explosive mix of gases!
USER MANUAL Gas Trainer The system is not waterproof. Never use it in the rain or in places where fire-
extinguishing materials are used. Contact with water may permanently damage the system, in which case any resulting damage will not be covered by the product guarantee. Never use the system if the casing or cables are damaged and if you suspect a potential risk for the instructor or trainee. In this event, contact the manufacturer and have the system repaired. If necessary, clean the equipment with a damp cloth (using a mild all-purpose household cleaning agent if necessary). The casing is not resistant to chemicals such as alcohol, thinner or acetone. If no units are being charged, disconnect the battery charger from the mains power. Once the training session has been completed, it is best to store the set back in the supplied carry case. You can thus be sure that the system will be well protected. 7. Guarantee From date of purchase, the Gas Trainer system carries a year's full guarantee on materials, call out charges and hourly rates. Defects caused by wrongful use, damage caused by falling or external factors that damage the Gas Trainer system are not covered by the guarantee. PROTOTYPE!
Page 22 of 23 BullEx 8. Frequently asked questions This section deals with the most common malfunctions and/or errors and possible solutions. If you have any doubts, please feel free to contact HAAGEN Fire Training Products. USER MANUAL Gas Trainer Problem:
Possible solution:
The Student Unit is not detecting anything from the transmitters The Instructor Unit cannot detect the Student Unit, although both devices are switched on. The Instructor Unit is not showing the measured values on the Student Unit. Either the Instructor Unit or the Student Unit is not responding to the button being pressed, or one of the units is showing strange symbols on the display. When switching on the Instructor or Student Unit, it shows the BullEx logo, but then immediately switches itself off Check whether all the transmitters set out are switched on. Check whether all the power LEDs on the transmitters are flashing. If the LED is not flashing but the device is switched on, the transmitters battery power is probably too low. Charge the transmitter and try again. If the problem persists, contact the manufacturer. Check whether both devices are set to the same channel. Check whether both batteries are sufficiently charged, and check whether both devices are within range. For the purposes of this test, hold them less then two metres apart. Switch off both devices and then switch on the Instructor Unit first, followed by the Student Unit. If the problem persists, contact manufacturer. Connect the device to the battery charger for at least five minutes, then disconnect it and switch the device back on. The battery is completely empty and the device switches itself off in order to prevent battery damage. Recharge the unit completely using the battery charger and try again. If the problem persists, contact manufacturer. PROTOTYPE!
Page 23 of 23
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2009-03-24 | 914 ~ 915 | DXT - Part 15 Low Power Transceiver, Rx Verified | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 | Effective |
2009-03-24
|
||||
| 1 | Applicant's complete, legal business name |
Bullex Inc.
|
||||
| 1 | FCC Registration Number (FRN) |
0018444224
|
||||
| 1 | Physical Address |
20 Corporate Circle
|
||||
| 1 |
Albany, New York 12203
|
|||||
| 1 |
United States
|
|||||
| app s | TCB Information | |||||
| n/a | ||||||
| app s | FCC ID | |||||
| 1 | Grantee Code |
W3Y
|
||||
| 1 | Equipment Product Code |
GTR001
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 | Name |
J**** B******
|
||||
| 1 | Title |
CTO
|
||||
| 1 | Telephone Number |
51868********
|
||||
| 1 | Fax Number |
51868********
|
||||
| 1 |
j******@bullexsafety.com
|
|||||
| app s | Technical Contact | |||||
| 1 | Firm Name |
Green Mountain Electromagnetics
|
||||
| 1 | Name |
K****** K********
|
||||
| 1 | Physical Address |
219 Blake Roy Road
|
||||
| 1 |
Middlebury, Vermont 05753
|
|||||
| 1 |
United States
|
|||||
| 1 | Telephone Number |
80238********
|
||||
| 1 | Fax Number |
80238********
|
||||
| 1 |
g******@gmelectro.com
|
|||||
| app s | Non Technical Contact | |||||
| 1 | Firm Name |
Bullex
|
||||
| 1 | Name |
B****** S****
|
||||
| 1 | Physical Address |
20 Corporate Circle
|
||||
| 1 |
Albany, New York 12203
|
|||||
| 1 |
United States
|
|||||
| 1 | Telephone Number |
51868********
|
||||
| 1 | Fax Number |
51868********
|
||||
| 1 |
b******@bullexsafety.com
|
|||||
| app s | Confidentiality (long or short term) | |||||
| 1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 | Equipment Class | DXT - Part 15 Low Power Transceiver, Rx Verified | ||||
| 1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Training Equipment | ||||
| 1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 | Modular Equipment Type | Does not apply | ||||
| 1 | Purpose / Application is for | Original Equipment | ||||
| 1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
| 1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 | Firm Name |
Green Mountain Electromagnetics, Incorporated
|
||||
| 1 | Name |
K**** K******
|
||||
| 1 | Telephone Number |
802-3********
|
||||
| 1 | Fax Number |
802-3********
|
||||
| 1 |
g******@gmelectro.com
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 15C | 914.00000000 | 915.00000000 | |||||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC