Welcome to use our terminalplease read this manual carefully to install and operate the terminal exactly. This user manual is for reference only. If some contents and operation steps are inconsistent with those for the actual product, the latter will prevail. Using the GPS tracker, we can position,monitor the vehicle including on the position server via GPRS,GPS and Internet. It can help customers to manage transparently,reduce cost,maintain security and raise efficiency. Now it is widely used in business traffic, logistics distribution,automobile lease, intelligent transportation, shipping market,army and police,rescuing,Safety Supervision,Intelligent city
. Features & Specifications Supports quad bands, i.e. 850/900/1800/1900MHz, universal in the world. Easy to install, connect the OBD interface to work. GPS precise positioning with A-GPS and uploaded by GPRS regularly, Supports real-time tracking and history track playback. Web browser platform, Smart phone app platform and SMS query. Vehicle collision and falling alarm. Built-in battery, unplugging alarm. 14 12VDC/24VDC
<10mA@12V
<40mA@12V Basic Specifications Voltage Standby Current Work current GPS positioning accuracy GSM positioning accuracy GPS Frequency GSM Frequency Hot/warm/cold start time Battery capacity 15m 100m 200mAh 1575MHz 850/900/1800/1900MHz
<3s<15s<60s Dimensions (mm) 56.5(L)X 47(W) X 24.6(H) Operating temperature
-20~70 Operating humidity Net Weight 20%80%RH 56 g 15
. Components & Accessories 2.1 Components
-Top Front(Up side)-
16 2.2 Accessories only for reference Screws (standard) OBD Extension Cable(optional) Optional accessory for the device, when the OBD interface is not very good and the GPS signal is poor, we can use an extension cable to strength GPS signal. 17
. SIM card Installation 3.1 Before Installation 3.1.1 Open the packing case, then check if the terminal is OK and the accessories are intact, or please contact your dealer;
3.1.2 Choosing a SIM card: You need a suitable SIM card for using the terminal, please contact your dealer if you have any question;
3.2 Card Installation Pinch the sides of the front cover with one hand, the other hand gently open the back cover. Pull down the SIM card cover, Turn the installed SIM card holder door to its original position, gently push the lid with your fingers so it is locked. Close packaging the two screws into the the back cover. the back cover, use a screwdriver to 18 19
. Set up the terminal 4.1 OBD interface position In general, OBD interface under the steering wheel, note that some cars cover. 20 4.2 Terminal Installation Plug the device in the original car OBD interface can, pay attention to plug tight. Ensure that the top surface of the terminal (receiving side) towards the sky. 4.3 Use Extension cable After installing the terminal, if the top side can not face the sky, please observe LED, if lights flash constantly, which means that the signal is not good. Use an extension cable connect the device and OBD interface to strength receiving GPS signals. Make sure the upside upward sky without metal blocks. Suggest to install the terminal in the following places:
1The hiding place below the front windshield trim panel;
2The hiding place around the front dash(if the surface is not made of metal);
3The place under the rear windshield;
21 Notice: The GSM and GPS signal may be weakened if there is metal thermal insulation layer or heating layer on the front windshield, the terminal may work abnormally, so please change the place to install the terminal. 22
. Use the terminal 5.1 Power on Connect terminal to the vehicle OBD interface and it wll power on. 5.2 LED indicators The red LED flickers fast when the terminal is searching for GSM network, it flickers intermittently when the terminal has registered the GSM network successfully. The blue LED flickers fast when the terminal is searching for the GPS satellite signal, it flickers intermittently when the terminal when the terminal has searched the satellites and can be positioned. 23 5.21 Red LED(indicates GSM working state) Fast flicker Intermittently flicker Searching for GSM network GSM/GPRS works normally 5.22 Blue LED(indicates GPS signal state) Fast flicker Searching GPS Satellites GPS works normally Intermittently flicker Notice: After power on, LED will turn off in 5 minutes for saving power and the device continues to work , LED will turn on if device receives a phone call and turn off again after 5 minutes. 5.3 Power off Unplugging the device and take off SIM card for a while. Terminal position query 6.1 Inquiry by SMS You can write a positioning SMS sending to the terminal to inquiry terminal position, the terminal will reply position SMS or map link. The SMS 24 commands please refer to the Operation Commands 6.2 Inquiry by service platform 6.2.1 Web Browser platform You can login the service platform and enter your ID and password to check the position of the terminal. Please ask your dealer for the WWW address of the position service platform. 6.2.1 Smart phone applications platform You can use a smart phone to check the terminals position.We have prepare for you the Android client
(Android), Apple clients (IOS), please check with your dealer to get installation package. Terminal Alarm 7.1 Collision / falling Alarm Conditions: When the Vehicle Collision or falling occurs. 7.2 Unplugging Alarm Conditions: When the device is unplugged. 7.3 Vibration Alarm Conditions: When the Vehicle Vibration occurs. 25 Note: You need to set vibration sensitivity and time, there are arm / disarm switch. 7.4 Speed Alarm Conditions: When the vehicle over and below the set speed. Note: You need to set the low speed limit and high speed limit. 7.5 Geo-fence Alarm Conditions: when the vehicle entry / exit / across the Geo-fence. Note: You need to set the conditions of crossing fence, fence types and so on. When above alarm occurs,the terminal will send alarm to service platform, meanwhile send a SMS message to the device administrator or center number. Note: Some alarm parameters must be set before work,Please refer to the Operation Commands
. Troubleshooting 8.1 Cannot connect to the Service platform The terminal is never online on the position server after installation . Please check the terminal:
26 1If the power cables are wired correctly? Pay attention to not connect them to the controlling cables of the vehicle. 2If the SIM card is installed correctly? Please refer to the installation instructions. 3Check the status of the LED indicators. If the terminal is OK, the red LED and the blue LED will intermittently flick. 4Inquiry the parameters of terminal via commands and check the accuracy of the parameters. 8.2 Show offline status on the Service platform First check if the LED indicators are OK, if cannot check them, you can check the SIM card following next steps:
1call the SIM card of the terminal and check if you can hear the connect ring. 2Check if the vehicle is in the area where there is no GSM signal. 3Check if one terminal or all terminals are offline in the area where terminal is offline. If all terminals are offline, you should ask the network operator. If the network is OK. 4Check if the SIM card has enough balance. 27 5If the terminal becomes offline on the last day of one month, please check if GPRS is close. 6Inquiry the parameters of terminal via commands and check the accuracy of the parameters. 8.3 Cannot position for a long time If the GPS is active, but the terminal cannot be positioned for long time, please check the terminal:
1If the vehicle is in the place where there is no GPS signal. 2The GSM and GPS signal may be weakened if the terminal is installed in the place with electromagnetic wave absorption material(such as metal blocks), special attention should be paid if there is metal thermal insulation layer or heating layer on the front windshield, so that the position accuracy will decline, and the severe ones will not be positioned. 8.4 Position drift Serious position drift will be found in places where GPS signal is poor. Please drive the vehicle to the open places. 8.5 Command receiving abnormally 1Check the instructions format. 2Check if the vehicle is in the places where there is GSM signal. 28 3Check if the SIM card is properly installed. Warranty rules 9.1 Special statement 1Technology change, without notice. 2) If the color and appearance are inconsistent with those for the actual product, the latter will prevail. 3Warranty card is only valid for the terminals with the following IMEI. 4Please take care of the warranty card and show it with the original purchase receipts when enjoying the warranty service. 9.2 Warranty period Since the date of purchase, passive waste host has one year warranty. 9.3 After sales Any of the following circumstances not covered by the warranty, but may be appropriate to pay repair:
1More than the warranty period. 2Unauthorized removal or repair damaged. 29 3Damage caused by improper installation, use, maintenance, custody. 4The IMEI label is torn or Obscure. 5Warranty certificate and product models do not match or warranty certificate be altered. 6Damage caused by force majeure. 30 Caution:
This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment. Such modifications or change could void the users authority to operate the equipment. This radio transmitter (identify the device by certification number or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCCs RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.