Welcome The HS6101 Bluetooth Headset makes connectivity invisible and reliable. It is astonishingly advanced and simple to use. HS6101 is actively creating Bluetooth solutions for work, play, home, and life everywhere around the globe.
Pure Design Attitude
Direct Linking Button
Bluetooth 2.0 Version Thank you for choosing the HS6101 headset with Bluetooth technology!
Guidelines for safe and efficient use NOTE: Read this information before using your Bluetooth headset. Changes or modifications to this Bluetooth headset not expressly approved by our company may void the users authority to operate the equipment. Please check for any exceptions, due to national requirements or limitations, in usage of Bluetooth equipment before using this product. Product care Do not expose your product to liquid or moisture or to humidity. Do not expose your product to extreme high or low temperatures. Do not expose your product to lit candles, cigarettes, or cigars, or to open flames etc. Do not drop, throw or try to bend the product as rough treatment could damage it. Do not use any other accessories than our company intended for use with this product. Do not attempt to disassemble your product. Do not keep the product in an area prone to dust and dirt. If you will not be using the product for a while, store it in place that is dry, free from damp. Dust and extreme temperatures.
*THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Driving Check the laws and regulations on the use of mobile phones and Bluetooth Headset equipment in the areas where you drive. Always give full attention to driving and pull off the road and park before making or answering a call if driving conditions so require. Electronic equipment Most modern electronic equipment is shielded from RF energy. However, certain electronic equipment is not, therefore:
Do not use your Bluetooth Headset near medical equipment without requesting permission. Disposal of old electrical &electronic equipment This product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Aircraft Turn your Bluetooth Headset OFF before boarding any aircraft. to prevent interference with communication systems, you must not use your Bluetooth Headset while the plane is in the air. Power supply
(1) Only use the charger that the supplier provides, to charge the Bluetooth battery.
(2) Do not open the charger, in order to avoid getting an electric shock or other danger.
(3) Do not use the charger in outdoor or humidity areas.
(4) Please conform to the user guide to charge the built-in Bluetooth battery.
(5) Avoiding charging the Bluetooth battery in high or low temperature. Placing The Bluetooth headset is wear in positions where it will not be subject to pressure since such pressure may result in bodily injury or damage to the product. Emergency calls IMPORTANT!
This Bluetooth Headset and the electronic device connected to the Headset which can not guarantee connection under all conditions. Therefore you should never rely solely upon any electronic device for essential communications. Battery information A rechargeable battery has a long service life if treated properly. A new battery or one that has not been used for a long period of time could have reduced capacity the first times it is used. Do not expose the battery to extreme temperatures, never above +55(+131).For maximum battery capacity, use the battery in room temperature. If the battery is used in low temperatures, the battery capacity will be reduced. The battery can only be charged in temperatures between +10(+50) and
+45(+113). Recycling the battery in your Bluetooth Headset The battery in your Bluetooth Headset must be disposed of properly and should never be placed in municipal waste. Contents Before you begin:
Charge your headsets battery Start Bluetooth feature on your phone Turning on and off Pair your headset Using your HS6101 Wearing the headset Making calls Indicator lights Audio tones Troubleshooting Before you begin Take a moment before you get started to familiarize yourself with your new HS6101 Headset Headset. Charge your Headsets Battery 1. Plug the charger into the top of the headset. When the battery is charging The red indicator light may take up to 1 minute for the light to turn on. When the headsets battery is fully charged (> 2 hours), the red indicator turns off. 2. Unplug the charger from the headset. NOTE: The headset can not work normally when charging Start Bluetooth feature On your phone Your phones Bluetooth feature is off by default. To use your headset, turn on the Bluetooth feature in your phone. NOTE: These steps are for most phones. For other phones youre your phones users guide. Turning on and off To turn your headset on, press and hold the Power Button until the indicator light flashes. Then, release the button. To turn your headset off, press and hold the Power Button until the indicator light flashes and then turns off. Pair your Headset First use 1. Press the Power Button for 3 seconds, the blue/red indicator flash in sequence until the headset pair with your phone;
2Choose the headset HS6101;
3. Enter the Bluetooth password 0000 to pair and connect the headset to your When pairing is successful, the blue indicator light flashes per 3 seconds and phone, and press ok. beeps. 4. Connect headset with phone. NOTE: These steps are for most phones. For other phones, see your phones users guide. After you have successfully paired your phone and headset, you do not need to repeat these initial setup steps each time you use the headset. Using your HS6101 Your phone and headset are now paired and ready to make and receive calls. To confirm they are operating properly, make a call:
1Place the headset over your ear. See Wearing the Headset. 2On your phone, dial the number you want to call and Press the Send key. 3If your phone and headset are successfully paired, you hear ringing on the headset. To save battery power, turn off the headset when you dont use it for an extended time by sliding the switch towards the charging plug. Making calls Tap MFB Receive/ End Voice Dial Reject a call Redial last call NOTE: HS6101 supports voice dial, Accessing call functions depends upon which profile your phone supports. See your phones users guide for more information. Indicator lights The indicator light provides information about your headset status. On a call Standby Low battery Note: After 5 minutes of inactivity, the light stops flashing to conserve power, but the headset remains in standby mode. Audio tones The audio tones provide information about your headset status. Audio Tones Single high tone when pressing volume button Audio indication Five rapid high tones repeated every 60 sec. Ring tone Single high tone Single high tone Single low tone Audio indication Headset Status Volume at minimum or maximum Redid last call Low battery Incoming call Pairing confirmation End call Voice activation Headset turn on, turn off Troubleshooting If you cannot connect the headset to your phone, do as follows:
(1) Ensure that the headset is switched on, charged.
(2) Ensure that the headset is paired with your phone.
(3) Ensure that the Bluetooth feature is activated on your phone. Please detailed proceed as described in the user guide of your phone.
(4) Ensure that the headset is within 10 meters of your phone and that there are no obstruction between the headset and the phone, such as walls or other electronic devices.