FCC ID: 2AHN6-OPCP106 5W Wireless Charger Clock-BK

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS EUT Cover off View 1 Antenna EUT Cover off View 2 EUT Main Board 1 Top View EUT Main Board 1 Bottom View EUT Main Board 2 Top View EUT Main Board 2 Bottom View EUT Battery Top View EUT Battery Bottom View

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS EUT Front View EUT Rear View EUT Top View EUT Bottom View EUT Left View EUT Right View EUT USB Cable View

EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Wireless charging part 

Wireless charging is based on magnetic resonance or inductive power transfer (IPT).This

is the process of passing a current between two objects by using a coil to sense an

electromagnetic field.· the supply voltage is converted to high frequency alternating

current (AC). alternating current (AC) is sent from the transmitter circuit to the transmitter

coil.The alternating current then generates a time-varying magnetic field in the transmitter

coil. the ac current flowing in the transmitter coil induces a magnetic field extending to the

receiver coil (when within a specified distance).

The magnetic field generates an electric current in the receiver coil of the device.The

transfer of energy between the transmitter and receiver coils is also known as magnetic or

resonant coupling, and is achieved by two coils that resonate at the same frequency.

current flowing in the receiver coil is converted to direct current (DC) by the receiver circuit,

which can then be used to charge the battery wirelessly

The clock part

Under the condition of the normal power supply, through BS83188 MCU external 32.768

KHz crystal vibration frequency division processing to timing, it was time to do the

corresponding state controlled by BS83188 will need to display the data sent to the LED

display module circuit in the form of dynamic scanning display the current time, external

keystrokes can be set up and use the corresponding function such as clock, alarm clock

and sleep.

The functions of main Components are mentioned as below.

1) U1 acts as crystal 32.768KHz

2) U1:BS83188 acts as clock IC



FCC Authorization 10/28/2019 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We, the undersigned, hereby authorize Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature:

Printed Name: Soli Mizrahi Title: President