FCC ID: 2AHN6-OPCP124 Mag Wireless Watch Charger-WT

EWL-22206/BY-OP-CP-124-WT Mag Wireless Watch Charger-WT This is an magentic wireless charger product, compatible with watch series 8/7/6/SE/5/4/3/2/1 Feature:

1. Travel friendly, compact size provied a trim, less cluttered look, lightweight design for superior portability 2. Perfect fit for all apple watch, compatible with watch series 8/7/6/SE/5/4/3/2/1 3.Easy to attach& Anti-scratch silicone grip 4. Built-in fast USB type-C connection, product with 5ft long durable TPE cable Operation steps:

1.To power on the apple watch, plug the USB-C end into a suitable 5V wall charger or port. 2.No wired connection required,Just snap your apple watch to the magnetic charger and enjoy fast and convenient charging. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. Noted:

Changed or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this device. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against interference in a harmful residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment an receiver.

- Connect the equipment to an outlet on a circuit difference from that o which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC RF exposure statement:

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm the radiator your body.

PRINTER SLUG FOR PRODUCT MARKING BRAND: BYTECH CATEGORY: CHARGERS DESCRIPTION: Mag Wireless Watch Charger-WT FILE NAME: BY-OP-CP-124-WT ProductFile ITEM NUMBER: BY-OP-CP-124-WT BARCODE: 805112123780 INNER BOX QUANTITY: 4 MASTER CARTON: 40 PRODUCT COLOR(S): As per Factorys Sample PRODUCT TEXTURE/APPEARANCE:

As per Factorys Sample PRIMARY DESIGNER: IOSIF DATE: 10.25.2023 PROOF READ:

DATE:

APPROVED BY:

DATE:

AUTHORIZATION SIGNATURES:

BACK OF THE WATCH BY-OP-CP-124-WT Input USB-C: 5V/2A Output: 2.5W Made in China FCC ID: 2AHN6-OPCP124 LASER ETCHING OR PRINT ON CLEAR LABEL. USE THIS DESIGN EXACTLY AS SHOWN. DO NOT MODIFY!

BY-OP-CP-124-WT Input USB-C: 5V/2A Output: 2.5W Made in China FCC ID: 2AH N6-OPCP124 MARKING COLOR Pantone 877 C USB-C TIP COLLAR 1.5mm m m 5 8 1 1

. LASER ETCHING OR PRINT PANTONE 877 C. USE THIS DESIGN EXACTLY AS SHOWN. DO NOT MODIFY!

MARKING COLOR Pantone 877 C

C5266091_X24_Ed.2 Attestation Statements TO:

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules for covered telecommunications equipment and video surveillance equipment produced by entities identified on the Commissions Covered List1, which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) that prohibit equipment authorization Applicant Company name: Bytech NY Inc. FRN: 0025388125 Grantee code: 2AHN6 FCC ID:

Contact Name:

Address:

Telephone No:

Fax No:

Email: solimiz@bytechintl.com 2AHN6-OPCP124 Soli Mizrahi 2585 West 13th Street, Brooklyn NY 11223 718-449-3700 718-449-2488 i. ii.

[Bytech NY Inc.] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification.

[Bytech NY Inc.] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing covered equipment. The applicant must sign this certification. Bytech NY Inc. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Date: 12.08.2023 Applicants Name: Soli Mizrahi Title:

Signature 1 The Commissions Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commissions website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes covered equipment. https://www.fcc.gov/supplychain/coveredlist 1/1

C5266091_X10_Ed.1 Bytech NY Inc. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: 2AHN6-OPCP124 To Whom It May Concern, Date: 12/8/2023 Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No Short-Term Confidentiality No No No No No No No No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Soli Mizrahi Date: 12/8/2023 Title:

1/1

Bytech NY Inc. Product Similarity Declaration Product name: Mag Wireless Watch Charger-WT Model name: BY-OP-CP-124-WT, EWL-22206 FCC ID: 2AHN6-OPCP124 We (Bytech NY Inc.) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model name. Demonstrate the detail (descriptions and pictures) as to the difference list above. Signature:

Name: Soli Mizrahi Title:

Date: 12.08.2023

C5266091_X8_Ed.1 Letter of Authorization Company: Bytech NY Inc. Address: 2585 West 13th Street, Brooklyn NY 11223 Product Name: Mag Wireless Watch Charger-WT Model Number: BY-OP-CP-124-WT, EWL-22206 FCC Identifier: 2AHN6-OPCP124 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Soli Mizrahi Date: 12/8/2023 Title:

Signature of applicant:

1/1

US Agent for Service of Process LETTER OF ATTESTATION TO:

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process:

Company Name: Bytech NY Inc. FRN: 0025388125 Contact Name: Soli Mizrahi Address: 2585 West 13th Street, Brooklyn NY 11223 Telephone No: 718-449-3700 Email: solimiz@bytechintl.com Applicant:

Company name: Bytech NY Inc. FRN: 0025388125 Product Description: Mag Wireless Watch Charger-WT Grantee code:

FCC ID:

Contact Name:

Address:

Telephone No:

Email:

2AHN6 2AHN6-OPCP124 Soli Mizrahi 2585 West 13th Street, Brooklyn NY 11223 718-449-3700 solimiz@bytechintl.com

[Bytech NY Inc.] certifies that, as of the date of this filing of the application with the TCB, [Bytech NY Inc.] is our designated US agent for service of process for the above referenced FCC ID. [Bytech NY Inc.] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [Bytech NY Inc.] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause 2.911. Date: 12.08.2023 Applicants Name: Soli Mizrahi US Agents Name: Soli Mizrahi Title:

Signature Title:

Signature 1/1