FCC ID: 2AHN6-AUBE218 True Wireless Stereo Earphones

Product Overview Specication Pairing Charging Factory reset 1. Fully charge both the earbuds and the charging case 1. Ensure L&R disconnect to any device. (trun off the INSTRUCTION MANUAL True Wireless Earbuds Model NO.: HM-AU-BE-218 Thank you for purchasing your new true wireless earbuds. We recommend that you spend some time reading this instruction manual in order to fully understand all the operational features it offers. Read all the safety instructions carefully before use and keep this instruction manual for future reference. Safety Rules 1. Charge the earbuds and the charging case at least once every 6 months. 2. Do not store the product in extreme temperature

(below 0 or above 45 3. Do not use chemicals or detergents to clean the 4. Do not drop or knock the product on hard surfaces. 5. Do not scrape the surface of product with sharp product. objects. 6. Do not try to take the product apart. In the Box Wireless Earbuds Portable Charging Case Type-C Charging Cable User manual Ear-Tips x 4 (S/M/L) 1. 2. 5. 3. 4. 6. 1. Indicator/Microphone 2. Touch Area 3. Silicone Ear-tips 4. Earphones Charging Contacts 5. Charging Case Indicator 6. USB-C Charging Port Find Your Fit Choose the size of silicone ear-tips that you feel the most comfortable with. Bluetooth version V5.1 BT proles support SPP/HFP/A2DP/AVCTP/HID Bluetooth range 10 m / 33 ft Frequency response 20 Hz - 20 kHz Battery capacity 50mAh for each earbuds 400mAh for charging case Charging time Around 1.2 hour Playing time Around 5 hours Up to 20 hours with charging case Talk time 3-5 hours Earbuds weight 5g each Case weight 10g Power ON/OFF Power ON 1. Take the earbuds out of the charging case the earbuds will power on automatically. 2. Long press the left and right touch area of the earbuds for three seconds, the earbuds indicator light ashes red and blue, and the earbuds powered on. 1. When using PT-30 True Wireless Earbuds the rst time. Take the earbuds out of the charging case, the earbuds indicator lights ash red and blue the pairing mode is on. 2. Turn on Bluetooth on your mobile device. 3. Search and select PT-30. 4. When successfully connected, the blue LEDs ash every 5 seconds. Remark: Earbuds power off when they stay out of range for over two minutes. before the rst use. 2. To prevent damage, use the provided USB-C cable. 3. Fully dry off the earbuds and the USB port before charging. 4. Charging takes around 1.2 hours. 5. When fully charged, all LEDs will stay on. EARBUDS Red LED No LED Charging Fully Charged CHARGING CASE Blue LED blinks Charging Four Blue LED Fully Charged Multi Functions Power OFF 1. Put the earbuds into the charging case, the earbuds will power off automatically. 2. Long press the left and right touch area of the earbuds for eight seconds, the earbuds indicator light turn off, and the earbuds powered off. PT-30 Pause/Play Single tap L/R Previous Song Double tap L Next Song Double tap R Volume Down Long press L Volume Up Long press R Active Siri/Google Assitant Triple tap L/R Answer/End a call Tap L/R Refuse the call Long press L/R bluetooth device connected before) 2. Triple tap the touch area of the left and right earbud. 3. When hear the prompt tone, The earbuds is ready to pair with your device now. WARNING 1. Listening to earbuds at high volume levels, particularly over extended periods of time, may damage your hearing. 2. Supervise children when using equipment. This product is not a toy. 3. The small parts included with this product can be a choking hazard. This product is not intended for use by small children and should be kept away from children under 3 years of age. FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does ause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. MADE IN CHINA

-7-

-1-

-2-

-3-

-4-

-5-

-6-

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AHN6-AUBE218 LABEL AND LOCATION True Wireless Stereo Earphones Model No.: HM-AU-BE-218 FCC ID: 2AHN6-AUBE218

(Size: L2.0cm x 0.5cm) Label Location Material: Tagboard Glue: adhesive sticker Font color: Blue Label color: White _____________________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 1

Bytech NY Inc. Agent Authorization Company: Bytech NY Inc. Address: 2585 West 13th Street,Brooklyn NY 11223,NewYork,United States Product Name: True Wireless Stereo Earphones Trade Mark: iHome Model Number(s): HM-AU-BE-218 FCC ID: 2AHN6-AUBE218 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: 2021-07-06 Name:

Soli Mizrahi Title:

Manager Company: Bytech NY Inc.

Bytech NY Inc. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2021-07-06 Subject; Request for Confidentiality FCC ID: 2AHN6-AUBE218 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure External Photos Test Setup Photos Internal Photos User Manual In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Soli Mizrahi Title: Manager