cover pages 1 & 2 pages 3 & 4 a u d i o I Bluetooth
Package Contents:
True Wireless Earbuds ModelIH-AU-BE-301 Charging Travel Case Operation Guide Getting Started Basic Functions Micro USB Charging Cable Instruction Manual Specifications:
BluetootVersion:
5.0 Working distance:
33 ft Charge Connector:
Micro USB Response:
Frequency Sensitivity:
95 db/ 1 khz Charging voltage:
5V/1A Charge time: 1-2 hrs Play Time: 2-3 hrs 20Hz-20KHz Before using this device, Charging page 6. instructions can be found on fully charge it. Right Earbud:
, Double press the control button to play or pause the audio. Microphone Control Button Indicator LED case and take out Both LED lights Open the charging the earbuds. will flash red and blue until one of the earbuds flashes earbud flashes right and left earbuds each other. red and blue, while the other blue, indicating that the have synced to Press and hold to skip to the next audio track. Single press to raise the volume. Left Earbud:
Press and hold to skip to the previous audio track. Pairing Single press to lower the volume. 1.Go to Bluetooth Settings on your Phone calls mobile device. 2.Turn BluetootON,on your device. 3.On your Bluetooth device, select
"iH AUBE301"
available devices. LEDs will shut 4.The earbud indicator from the list of off to indicate they are connected. Indicator LEDs Micro USB Charging Port When there is an incoming will pause the playback and ring to alert you of the call. Phone call functions the same on either of the earbuds.*
the unit call, work press single call, button of either earbud. To double press the control To answer an incoming the control end a call, button. and hold the control
*Volume with some smartphone models. an incoming controls To reject button. call, press may not work during phone calls TRUE WIRELESS EARBUDS pages 5 & 6 pages 7 & 8 back Troubleshootings Charging Warnings FCC FCC ID: 2AHN6-IHBE301 Warranty QfJ 3.Plug the cable into a standard USB metallic objects. Earbuds do not sync with each other:
1.Replace the earbuds in the case. 1.Place the earbuds in the case, then both ensuring take out the earbuds, earbuds are turned on. 2. Connect the Micro USB charging cable to the charging bottom of the case. port on the 2.On each earbud, press and hold the button for 5 seconds. control earbud will turn off flashes purple 3 times. The after the LED 3.Replace the earbuds in the charging case. 4.Repeat the Getting Started process. Earbuds do not pair to device:
1.Turn the Earbuds OFF by pressing button on each earbud the control until the LED blinks turns off. red, and then 2.Replace the earbuds in the case. Turn Bluetooth OFF and your device's then back ON. Then repeat the pairing process. 5V/1A or higher power output. into a charging plug the case the bottom light on the front red. This means the case When you mechanism of the case glows battery indicate is being charged. available case battery charge. The white lights While this is happening buds inside the indicates they are being charged. the lights on the case glow solid red, which the case LEDs When fully charged solid and the earbud LEDs will shut off. will glow 4.When fully charged, unplug the charging cable from the power source. If want to charge the earbuds from charge case internal replace will show the LEDs on the buds will glow solid red. them in the case. The case LEDs battery status and red charging, battery, simply the Do not use this unit for anything other than its intended use. Do not puncture, throw, drop, bend, or modify this product. Do not throw this product Do not short-curcuit the battery into fire or water. with any metal or Do not expose this product to corrosive liquids such as salt water. Do not operate to prevent yourself Do not allow the unit if it has been wet or moist against electric shock and/or to injury and damage to the unit. children to play with this product as it is not a toy, and may present a choking such hazard in direct console, sunlight, or seat of a vehicle. or use your device, in the temperature is likely to drop 140F, such as inside a Avoid leaving your device as on the dashboard, your device, Do not leave any area where below 32F, or may exceed closed on a hot day. vehicle to electrical Repairs equipment should only be electrician. by a qualified performed repairs Protect Improper may place the user at serious risk. your hearing Prolonged your hearing at a safe listening may use at elevated volumes in level. affect hearing loss. and could result capacity by always Use the earbuds To avoid damage with this charging to the charging case only. case, please only use a USB 5V/1A or higher charger. In order to ensure once a month. at least the battery life, charge normally FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help. RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. this product purchaser from defects and with regard to this limited to repair purchase at its option, shall be limited solely of any Bytech NY INC. warrants to be materially free workmanship to the original for a period of 12 months from the original date. Bytech responsibility warranty or replacement product use. This warranty consumer extend to damage or failure results alteration, or maintenance. 12 months period following purchase, defects return freight the defective prepaid) abuse, improper from misuse, in material the product product fails due to the
(with which fails during normal does not which accident, neglect, or workmanship, At any time during the with proof of purchase. installation WWW.BYTECHINTL.COM Bytech NY Inc 2585 West 13street Brooklyn
(718)449-3700 NY 11223 CE @J (j e). MADE IN CHINA 2020 BYTECH NY INC.
*All trademarks property and copyrights are the of the respective companies.
-AU-BE-301-WT User Manual vl.1 060220 Black ink only, thin glossy paper, staple saddle bound, 5 sheets front & back