FCC ID: 2AD2W-LOWSC510WBI Wireless Weather Station with Wifi

5-IN-1 WIRELESS WEATHER STATION WITH WI-FI USER GUIDE LOWSC510WB Thank you for purchasing the Logia 5-in-1 Wireless Weather Station with WI-FI. This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that does not conform to the guidelines described in this User Guide may void the limited warranty. Please read all directions before using the product and retain this guide for reference. This product is intended for household use only. It is not intended for commercial use. This product is covered by a limited one-year warranty. Coverage is subject to limits and exclusions. See warranty for details. TABLE OF CONTENTS SAFETY PRECAUTIONS PRODUCT FEATURES PACKAGE CONTENTS DISPLAY CONSOLE OVERVIEW LCD DISPLAY OVERVIEW WIRELESS WEATHER SENSOR OVERVIEW WIRELESS WEATHER SENSOR SETUP DISPLAY CONSOLE SETUP CREATE YOUR WEATHER SERVER ACCOUNT & SET UP WI-FI CONNECTION CREATE YOUR WEATHERCLOUD ACCOUNT SET UP WI-FI CONNECTION ADVANCED SETTINGS VIA WEB INTERFACE VIEW YOUR WEATHER DATA IN WEATHER UNDERGROUND VIEW YOUR WEATHER DATA IN WEATHERCLOUD OTHER CONSOLE SETTINGS AND FUNCTIONS SETTING THE ALARM WIND READOUTS WEATHER FORECAST BAROMETRIC PRESSURE RAINFALL WEATHER ALERT SETTINGS CARE AND MAINTENANCE SPECIFICATIONS QUESTIONS?

3 4 5 6 7 8 10 13 15 17 18 20 22 22 24 26 28 30 30 31 32 34 35 39 2 SAFETY PRECAUTIONS 1. Do not let children use or play with this device. It is not a toy. 2. Do not use any attachments not supplied or recommended by the manufacturer. 3. Do not place the appliance near open flames or heat sources. Fire, electric shock, product damage, or injury might occur. 4. Do not mix old and new batteries in the display unit. 5. A low battery symbol will appear in the OUT or CH sections of the LCD display when battery power is low on the console or weather sensor, respectively. Be sure to change the batteries promptly to ensure the proper operation of the weather station. 6. Do not subject the display unit to excessive force or shock (do not throw the unit!), dust, extreme high or low temperatures, or humidity/moisture. These can cause the unit to stop functioning as well as present the risk of shock, fire, or other hazards. 7. Do not cover the ventilation holes on the display with newspapers, curtains, or any other items. 8. Never immerse the display in water! If you spill any liquid on the display, dry it immediately with a soft, lint-free cloth. 9. Do not use abrasive or corrosive materials to clean the display. 10. Do not tamper with the display or the weather vanes internal components. This invalidates your limited warranty. 11. Placing this product on certain types of wood may result in unintended damage to the finish, for which Logia will not be responsible. Consult your furniture manufacturers instructions for information on wood care. 12. Do not dispose of old batteries as unsorted municipal waste. Make sure to dispose of them properly according to your local guidelines. 13. The main display console is only intended for use indoors. QUESTIONS OR PROBLEMS? CONTACT US!

Email: info@supportcbp.com or call: 1-833-815-0568 www.logiaweatherstation.com 3 PRODUCT FEATURES 1. Wireless 5-in-1 weather sensor measures wind speed, wind direction, rainfall, temperature, and humidity. 2. No calibration needed! The product is fully pre-calibrated and mostly assembled; all you need to do is install it and sync with the included display console. 3. Provides precise weather and environmental information directly from your own backyard, instead of relying on a national weather station. 4. Color LCD display with dimmable backlight. 5. Can alert you to excessively high/low indoor or outdoor temperatures or humidity, high wind speeds, extreme drops in barometric pressure, high heat indexes, low wind chills, and high/low dew points. 6. Syncs with installed WI-FI and online weather servers (Weather Undergound and Weathercloud) to help you store and track weather data in your area, plus view live weather statistics and historical weather trends. 4 PACKAGE CONTENTS 1 2 4 3 10 11 CHANNEL HISTORY MAX/MIN 5 6 7 8 9 12 13 14 BARO SENSOR REFRESH RESET UNIT WI-FI 1. Wireless Weather Sensor (1) 2. Mounting Pole (1) Plastic Exterior 3. Mounting Clamp (1) 4. Mounting Base (1) 5. Large Mounting Screws (4) 6. Large Hexagonal Nuts (4) 7. Large Washers (4) 8. Small Screws (2) 9. Small Hexagonal Nuts (2) 10. Rubber Pads for Mounting Clamp 11. Display Console with Kickstand (1) 12. Display Console Battery (1) 13. Display Console Power Cable (1) 14. User Guide 5 DISPLAY CONSOLE OVERVIEW MAIN CONSOLE OVERVIEW 1 2 11 12 13 14 15 16 BARO BARO SENSOR SENSOR REFRESH REFRESH RESET RESET CHANNEL CHANNEL HISTORY HISTORY MAX/MIN MAX/MIN UNIT UNITWI-FI WI-FI 3 4 5 6 7 8 9 10 17 18 19 20 21 22 23 24 25 1. Kickstand 2. SNOOZE button 3. CHANNEL button 4. HISTORY button 5. MAX/MIN button 6. WIND button 7. INDEX button 8. BARO button 9. RAIN button 10. LCD Display (See overview on page7 11. CLOCK SET button 12. ALARM button 13. Wall mount notch 14. ALERT button 15. button 16. button 17. Power connection 18. 12/24 button 19. C/F button 20. BARO UNIT button 21. SENSOR/WI-FI button 22. REFRESH button 23. Battery compartment 24. OFF/LO/HI button 25. RESET button 6 LCD DISPLAY OVERVIEW LCD DISPLAY 1 2 3 4 5 6 7 8 1 2 WIRELESS 5-IN-1 WEATHER SENSOR 1. Rain collector 2. Balance indicator 1. Temperature & humidity (indoor/CH) 3. Antenna 2. Weather forecast 4. Wind cups 3. Time, date, & moon phase 5. Mounting pole 6. Radiation shield 4. Wind speed & direction 7. Wind vane 5. Temperature & humidity (outdoor) 8. Mounting base 6. Barometer 9. Mounting clamp 7. Rainfall 10. Red LED indicator 8. Weather index 11. [ RESET ] key 12. Battery door 13. Screws 3 5 Display section:

1. Indoor / CH temperature &

humidity 2. Weather forecast 3. Time, calendar & moon phase 4. Wind direction & speed 5. Outdoor temperature &

humidity 6. Barometer 7. Rainfall 8. Weather index 4 6 7 11 7 12 WIRELESS WEATHER SENSOR OVERVIEW MAIN DEVICE 1 2 3 5 8 9 4 6 7 11 12 13 10 1. Rain collector 2. Level 3. Antenna 4. Wind cups (anemometer) 5. Mounting pole 6. Sensor casing 7. Wind vane 8. Mounting base 9. Mounting clamp 10. Red LED indicator 11. RESET button 12. Battery compartment 13. Mounting clamp screws 8 RAIN GAUGE 1 2 3 4 1. Rain collector 2. Tipping bucket 3. Rain sensor 4. Drain holes TEMPERATURE AND HUMIDITY SENSOR 1 2 1. Sensor shield 2. Temperature and humidity sensor WIND SENSOR 1. Wind cups (anemometer) 2. Wind vane 1 2 9 WIRELESS WEATHER SENSOR SETUP INSTALL BATTERIES 1. Unscrew the door to the battery compartment on the underside of the main sensor unit. 2. Insert three (3) new AA alkaline batteries, making sure the polarities match up with the markings inside the compartment. 3. Replace the battery door, ensuring the watertight O-ring is properly aligned. This maintains the 4. Replace the battery screw, making sure it is tightly fastened down. The red LED should begin Insert the top of the pole into the square hole at the bottom of the weather sensor. Ensure that the arrow indicators are lined up as shown. BATTERY AND INSTALLATION Unscrew the battery door at bottom of unit and insert the batteries according to the +/- polarity indicated . Screw the battery door compartment on tightly . water-resistant seal. 1 . Ensure the water tight O-ring is properly aligned in flashing every 12 seconds. ensure water resistant . 2. The red LED will begin flashing every 12 seconds. ASSEMBLE STAND AND POLE 1. ASSEMBLY THE STAND AND POLE Insert the top side of the pole to the square hole of Ensure the pole and sensor's indicator align . Place the nut in the hexagon hole on the sensor, then insert the screw in other side and tighten it by 10 Ensure the pole and sensor's indicator align . Ensure the pole and sensor's indicator align . 2. Insert the nut into the hexagonal hole by the sensor and hold it in place, then insert the screw through the other side. Use a screwdriver to tighten the screw. Do not insert the screw first, or the nut may not line up correctly with the designated hole. Place the nut in the hexagon hole on the sensor, then insert the screw in other side and tighten it by Place the nut in the hexagon hole on the sensor, then insert the screw in other side and tighten it by Insert the other side of the pole to the square hole 3. Insert the bottom of the pole into the square hole on the plastic stand, making sure the arrows are lined up as shown. Insert the other side of the pole to the square hole Ensure the pole and stand's indicator align . Ensure the pole and stand's indicator align . 4 Please note that there are two different ways you can attach the pole to the base, depending on how you will be mounting it outdoors. If you will be fastening the sensor directly to a railing, use the option that positions the stand perpendicular to the sensor pole. If you will be fastening it to a pole, use the slot that positions the base parallel to the sensor pole. 4 11 4. Insert the nut into the hexagonal hole on the side of the stand and hold it in place, then insert the screw through the other side. Use a screwdriver to tighten the screw. Place the nut in the hexagon hole of the stand, then insert the screw in other side and then MOUNT THE SENSOR OUTDOORS 1. The wireless weather sensor should be mounted in an open area with no obstructions above and/

or around it, so that it can accurately measure the rain and wind. 2. The wind vane should be pointed due North (refer to the arrow on top of the unit) in order to be Point to NORTH properly oriented and receive accurate wind readings. Add rubber pads before mount on the pole 3. The mounting stand and included clamps should be secured to a post or pole, with a minimum of 4.9 ft. (1.5 m) ground clearance. If securing to a pole, make sure you add the rubber pads to the clamp before fastening it with the included screws. The pole should be between 1-1.3 in diameter. 4. 1 .5 meter off the ground Install the wireless 5-IN-1 sensor in an open location with no obstructions above and around the sensor for accurate rain and wind measurement. Install the sensor with the smaller end facing the North to properly orient the wind Add rubber pads before mount on the pole Add rubber pads before mount on the pole Secure the mounting stand and bracket

(included) to a post or pole, and allow minimum 1.5m off the ground. Point to Point to NORTH NORTH 1.5 meter off 1.5 meter off the ground the ground A MOUNTING ON POLE

(POLE DIAMETER 1-1.3)

(25-33MM) 1 . Install the wireless 5-IN-1 sensor at least 1 .5m off the ground for better and more accurate 2 . Choose an open area within 150 meters from the LCD console . 3 . Install the wireless 5-IN-1 sensor as level as possible to achieve accurate rain and wind POWER UP CONSOLE Your console can pairing up with the wireless 5-IN-1 outdoor weather sensor and up to 7 optional wireless sensors. (Not included) If securing to a railing, make sure the railing is made of suitable material, and screw directly through the openings in the base stand into the railing until secure. INSTALL THE BACKUP BATTERY 4 . Mount the wireless 5-IN-1 sensor with the wind meter end pointing to the North to correctly 12 4 . Mount the wireless 5-IN-1 sensor with the wind meter end pointing to the North to correctly orient direction of the wind vane . Add rubber pads before mount on the pole Point to NORTH A . Mounting on pole (Pole Diameter 1"~1 .3")

(25~33mm) B MOUNTING ON A RAILING B . Mounting on the railing 1.5 meter off the ground 5. The mounting location should be within 492 ft. (150 m) of the location where you will be keeping the display console with few obstructions and relatively clear sightlines. If there are multiple walls/

levels/buildings in between the sensor and the display console, the functionality could be compromised and you will need less space between the two. 6. Use the built-in level to make sure the sensor is parallel with the ground. 5 DISPLAY CONSOLE SETUP Your display console can pair with the wireless weather sensor as well as up to seven (7) optional wireless hygro-thermo outdoor sensors (not included). INSTALLING THE BACKUP BATTERY 1. Remove the battery door on the rear of the console unit. 2. Insert a new button battery. 3. Replace the battery door. NOTE: The backup battery can assist with backing up the time & date, MAX/MIN data, weather records from the past 24 hours, alert settings, the offset value of weather data, and the sensor(s) channel history. The built-in memory will backup router and weather server settings. POWERING THE DISPLAY CONSOLE 1. Connect the power cable to a wall outlet or power source and to the display console power connection port. 2. The display console should power on, and all the segments of the LCD display screen should be shown. 3. The display console will automatically start AP mode. 13 NOTE: If nothing appears on the LCD display screen after you plug in the power adaptor, use a pin or similar small object to press the RESET button. SET THE LCD DISPLAY VIEWING ANGLE If you have the display console wall-mounted or on a table stand, the viewing angle may need adjustment. Press or buttons while the display is in normal operating mode to adjust the viewing angle. PAIRING THE WIRELESS WEATHER SENSOR WITH THE DISPLAY CONSOLE 1. Once your display console powers on, it should automatically search for and connect to the wireless weather sensor. If the console does not connect within the first 15 minutes, refer to the following section, Changing Batteries and Manual Pairing, for instructions on manual pairing. 2. You will see the icon of an antenna blinking in the temperature and humidity (outdoor) section of the display. 3. Once the pairing process completes, the antenna icon will appear solid (not blinking), and the readings for outdoor temperature and humidity, wind speed, wind direction, and rainfall will appear in their designated sections of the LCD display. CHANGING BATTERIES AND MANUAL PAIRING Whenever you change the batteries in the sensor, you will need to manually repair it with the display console. Follow these instructions to manually pair your console with the sensor. 3 BARO SENSOR REFRESH RESET UNIT WI-FI CHANNEL HISTORY MAX/MIN 1 2 1. Change the batteries in the wireless weather sensor. 2. Press the SENSOR/WI-FI button at the back of the console. 3. Press the RESET key on the underside of the wireless weather sensor. Make sure after pressing the RESET key that the red LED indicator is flashing every 12 seconds. 14 NOTE: Any time you press the RESET key underneath the wireless weather sensor, it generates a new ID code for pairing with the console, and you will need to press the SENSOR/WI-FI button on the console for the two devices to pair again. PAIRING ADDITIONAL WIRELESS SENSORS WITH THE DISPLAY CONSOLE The display console should automatically search and pair with any additional wireless hygro-thermo outdoor sensors you install. You can also press the SENSOR/WI-FI button to search manually for the sensor while on the channel where it should display. Once your sensor has paired, the sensor signal strength indicator and weather information will appear in the temperature and humidity (outdoor) section when you are on the channel associated with that sensor. CREATE YOUR WEATHER SERVER ACCOUNT & SET UP WI-FI CONNECTION Your display console can upload weather data to Weather Underground and/or Weathercloud via your WI-FI router. NOTE: Logia does not own Weather Underground or Weathercloud, and these instructions are liable to change without notice due to changes in either website. CREATE YOUR WEATHER UNDERGROUND ACCOUNT 1. Visit the Weather Underground website at https://www.wunderground.com and click the link that says JOIN. Follow the instructions to create an account. NOTE: Please use a valid email address to register your account. NOTE:

Use the valid email address to register your account. NOTE:

Use the valid email address to register your account. 2. After you have created your account and completed the Email validation, please go back 2. After you have created your account and completed the Email validation, please go back 2. Once you have created your account and completed the email validation process, return to the Weather Underground website. Click the dropdown link at the top of the site that says MORE, and to the WUndergound web page. Click the "

then select Add Weather Station from the dropdown menu. and click Add Weather Station. to the WUndergound web page. Click the "

and click Add Weather Station.

" on the top to open the drop-down menu

" on the top to open the drop-down menu 3. Follow the instructions on screen to enter your weather station information. Step 2 will ask you to enter a name for your weather station (get creative if you want, but dont forget the name you gave it!) and choose your station hardware (choose other). Once you complete this section, click Submit to generate your unique Station ID and key. 15 4. Write down or screenshot your Station ID and Station Key/Password for reference and to complete the setup process. 16 CREATE WEATHERCLOUD ACCOUNT 1 . In https://weathercloud.net enter your information in "Join us today" section, then follow CREATE WEATHERCLOUD ACCOUNT 1 . In https://weathercloud.net enter your information in "Join us today" section, then follow CREATE WEATHERCLOUD ACCOUNT 1 . In https://weathercloud.net enter your information in "Join us today" section, then follow CREATE YOUR WEATHERCLOUD ACCOUNT the instructions to create your account . 1. Visit the Weathercloud website at https://www.weathercloud.net and enter your information in the instructions to create your account . the box that says Join Us Today. Follow the instructions to create an account. NOTE: Please use a valid email address to register your account. the instructions to create your account . NOTE:

Use the valid email address to register your account. NOTE:

Use the valid email address to register your account. 2 . Sign in weathercloud and then you will go the "Devices" page, click "+ New" to create new 2. Once your account is created, sign into it, and then click +New to add a new device. NOTE:

device. Use the valid email address to register your account. 2 . Sign in weathercloud and then you will go the "Devices" page, click "+ New" to create new 2 . Sign in weathercloud and then you will go the "Devices" page, click "+ New" to create new device. device. 3 . Enter all the information in Create new device page, for the Model* selection box select 3. Enter all the requested information into the Create New Device page. When presented with the Model selection box, choose LOWSC510WB Series under the Logia section. When presented the "W100 Series" under "CCL" section. for the Link type* selection box select the "Pro Weather Link", Once you have completed, click Create . with the Link Type selection box, choose Pro Weather Link. Once you have completed this the "W100 Series" under "CCL" section. for the Link type* selection box select the "Pro section, click Create. Weather Link", Once you have completed, click Create . the "W100 Series" under "CCL" section. for the Link type* selection box select the "Pro Weather Link", Once you have completed, click Create . 3 . Enter all the information in Create new device page, for the Model* selection box select 3 . Enter all the information in Create new device page, for the Model* selection box select 8 4. Write down or screenshot your Weathercloud ID and Station Key/Password for reference and to complete the setup process. 8 8 17 O N n o p n o S S s s c e s e c y o p th e . S

[S g th E aire e wirele ole will a d u R / S 4 . Jot down your ID and key for the further setup step. ole dis p, th s 4 . Jot down your ID and key for the further setup step. s s his u uto e s C U pla C ] k e e c P P y . nit is d atic or sig y to s C TIM ally s uter with P e sig al stre arc arc n h th h a nit will a gth in e o d p e [ TIM n dis air u dic 4 . Jot down your ID and key for the further setup step. uto pla ator a E S y c d w n als T E:

e tim oftw e s y or(s) with th uter, th o pre e u s th C s C Tim ct . O n als T ] k o y s or . y at b u als o n d to a C s oftw for 8 s orre u c

P c e s y e c

Y

T th s n o c c s c s E Y Y Y e o e e n e e e e n n o p o p a h n n n e n n o a e o N N N N T P O m m m m n n o c o e n d s . n p n c u are is o c fu ctio e e th p is a n . e P C tim ble or dis c a n nly w W m atic uto are "

atic ally s C ] k y to s ally s ath er T y c hro y y e n e c hro e n s of th s in th ar in th e s e O n th ic C ] k o e s n a e y . p p e w o e n m e s or . otto of wirele d to pre s 5-in-1 s e [ S s th s s E e N S n s O or will g R / S Y N n s ole p y o h a n e ath n ur wirele el's s er infor e n m a n o n g u o n e s c C s e P niz c u ork with th ordin e s y ble a g to y c u ur c p th uto tim e e s y s s s s or atio SETUP WI-FI CONNECTION n will a 1 . When you first power up the console, or press and hold the [ WI-FI / SENSOR ] key for 6

" icon to signify that it has are "

niz ol" thro e its c SETUP WI-FI CONNECTION e th SET UP WI-FI CONNECTION 1 . When you first power up the console, or press and hold the [ WI-FI / SENSOR ] key for 6 ale h U p P e tim n

" icon to signify that it has When you first power up the console, or press and hold the SENSOR/WI-FI button for six (6) seconds, ar a C tim e in B d the console LCD display will show the letters AP and an icon to signify that it has entered oftw ata c sta e in d clo Access Point (AP) mode. At this time it will be ready for the WI-FI settings to be adjusted. ntly a sta ble . O ntly . d 1 2:0 seconds in normal mode, the console LCD will show "AP" and "

entered AP (access point) mode, and is ready for WI-FI settings. urre seconds in normal mode, the console LCD will show "AP" and "

nt P ic o entered AP (access point) mode, and is ready for WI-FI settings. C tim n will a c fu ctio 2 . Use the smart phone, tablet, or computer to connect to the console through WI-FI. er T 3 . In PC choose WiFi network settings or In Android / iOS choose setting WI-FI to select the e, s o ple ar in th y pre seconds in normal mode, the console LCD will show "AP" and "

entered AP (access point) mode, and is ready for WI-FI settings. ol", ple 2 . Use the smart phone, tablet, or computer to connect to the console through WI-FI. s e 3 . In PC choose WiFi network settings or In Android / iOS choose setting WI-FI to select the SETUP WI-FI CONNECTION c e c 1 . When you first power up the console, or press and hold the [ WI-FI / SENSOR ] key for 6 p s

" icon to signify that it has e e er d e Tim d h consoles SSID: PWS-XXXXXX in the list and it will need several second to connect. ure y ur P ctio old [ TIM n . Use your smartphone, tablet, or computer to connect to the console via WI-FI by following these steps:

1. On PC, open your WI-FI network settings. On Android or iOS devices, go to settings menu k e s consoles SSID: PWS-XXXXXX in the list and it will need several second to connect. and then select Connections/WI-FI to open the network settings. C tim ure th 2 . Use the smart phone, tablet, or computer to connect to the console through WI-FI. 2. Locate the display consoles SSID from the list. It should appear as PWS-XXXXXX (where all e is e 3 . In PC choose WiFi network settings or In Android / iOS choose setting WI-FI to select the the Xs are integers) in the list. Tap on the SSID to connect. This step will take several seconds. consoles SSID: PWS-XXXXXX in the list and it will need several second to connect. C ] k s e s c k w s s a PWS-XXXXXX E S ath n b n c Y n a n u d n h e o n n e a n o n n e n 0 a a e o a a a n o p p e e n n 6 N S m m m W cte cte d to d to th y . Y o u or(s) . Y ally . O p p e e y PWS-XXXXXX PWS-XXXXXX PWS-XXXXXX PWS-XXXXXX PWS-XXXXXX PC WI-FI network interface Android WI-FI network interface 4 . Once connected, enter the following IP address into your internet browsers address bar, to access the consoles web interface:

http://192.168.1.1 NOTE :

- Some browsers will treat 192.168.1.1 as a search, so make sure you include http:// header.

- Recommended browsers, such as the latest version of Chrome, Safari, Edge, Firefox or PC WI-FI network interface Opera. 18 Android WI-FI network interface Android WI-FI network interface 4 . Once connected, enter the following IP address into your internet browsers address bar, to PC WI-FI network interface 4 . Once connected, enter the following IP address into your internet browsers address bar, to access the consoles web interface:

9 http://192.168.1.1 3. Once you are connected to the display console, open up your internet or mobile web browser, and enter the following address into the address bar: http://192.168.1.1 (make sure to include the http:// or else the web browser may interpret the address as a search query). We recommend using the latest version of reputable web browsers. SET UP WEATHER SERVER CONNECTION Once you are connected via WI-FI to the display console and have opened the settings page at http://192.168.1.1, enter the following information into the web interface setup page. If you have chosen not to use Weather Underground or Weatherclouds servers, leave the check boxes unchecked. Press SETUP icon to SETUP page Press to search router Press to allow add router manually Password record remark

(If you entered password) Current ID and key recorded (if any) Current ID and key recorded (if any) SETUP WIFI Router setup Language: English ADVANCED Search Router:

ROUTER_A Add Router Security type:

WAP2 Router Password:

Weather server setup

Wunderground Station ID:

Station key:

WDw124

Weathercloud Station ID:

Station key:

Mac address Time server setup IPACIR23Wc

00:0E:C6:00:07:10 Server URL:

nist .time .gov Select the WI-FI router (SSID) you will connect to Manually enter the SSID if not on the list Select routers security type (usually WAP2) Routers password (leave blank if unsecured) Enter new Station ID and Station key assigned by Wunderground (Weather Underground) Enter new Station ID and Station key assigned by Weathercloud Select time server Function firmware version: 1 .00 WiFi firmware version: 1 .00 Apply Press to complete the setting SETUP page 19 recorded (if any) Server URL:

Station key:

nist.time.gov Function firmware version: 1.00 WiFi firmware version: 1.00 Mac address Time server setup

00:0E:C6:00:07:10 Apply Select time server Press to complete the setting Server URL:

nist.time.gov Select time server SETUP page Apply Function firmware version: 1.00 WiFi firmware version: 1.00 NOTE:

- When WI-FI setup is complete, your PC or mobile will resume your default WI-FI connection.

- During AP mode, you can press and hold the [ WI-FI / SENSOR ] key for 6 seconds to stop AP mode and the console will restore your previous setting. NOTES: When the WI-FI setup is complete, your computer or mobile device will return to the default WI-FI connection. If it does not, simply open your devices wireless network settings and manually reconnect. While in AP mode, you can press and hold the SENSOR/WI-FI button for six (6) seconds to exit AP NOTE:

mode. The display console will simply restore the previous AP settings.

- When WI-FI setup is complete, your PC or mobile will resume your default WI-FI connection.

- During AP mode, you can press and hold the [ WI-FI / SENSOR ] key for 6 seconds to stop AP mode and the console will restore your previous setting. WI-FI CONNECTION STATUS WI-FI CONNECTION STATUS WI-FI CONNECTION STATUS The following icons on the LCD display screen show the WI-FI status:

Below is the WI-FI icon status on the console LCD:

Below is the WI-FI icon status on the console LCD:

Flashing: Console is trying to connect to WI-FI router Flashing: Console is trying to connect to WI-FI router Press to complete the setting SETUP page Flashing: the display console is currently in AP (access point) mode Flashing: the display console is currently in AP (access point) mode Solid: the display console is Solid: the display console is connected to your wireless router Flashing: the display console is attempting to connect to your wireless router Flashing: the display console is connected to your wireless router attempting to connect to your wireless router TIME SERVER CONNECTION STATUS After the console has connected to the internet, it will attempt to connect to the internet time server to obtain the UTC time. Once the connection succeeds and the console's time has been updated, the TIME SERVER CONNECTION STATUS After the console has connected to the internet, it will attempt to connect to the internet time TIME SERVER CONNECTION STATUS server to obtain the UTC time. Once the connection succeeds and the console's time has been Once the display console has connected to the internet, it will attempt to connect to the internet time updated, the server to obtain the UTC time. Once the connection is successful and the time has been updated, the SYNC icon will appear above the WI-FI icon on the LCD. Time zone: To display the time of your time-zone, change the time zone in CLOCK setting mode from '00' (default) to your time zone (e.g.08 for Hong Kong). 1. Press and hold [ CLOCK SET ] key for 2s to enter time setting mode. 2. Press [

] key to enter your time zone, then press and hold [ CLOCK SET ] key icon will appear on the LCD. icon will appear on the LCD.

] or [

Time zone: To display the time of your time-zone, change the time zone in CLOCK setting mode from '00' (default) to your time zone (e.g.08 for Hong Kong). 1. Press and hold [ CLOCK SET ] key for 2s to enter time setting mode. 2. Press [

setting for the console. To display the correct time for your specific time zone, youll need to change the time zone in the CLOCK setting mode from 00 (default) to your specific time zone (e.g. -5 for EST). If you dont know your time zone, you can look it up online.

] or [

1. In normal operating mode, press and hold the CLOCK SET button for two (2) seconds to enter the clock setting menu. 2. Press the or buttons to adjust the time zone, and then press and hold the CLOCK SET button for two (2) seconds to confirm and exit the menu. Please refer to the Setting the Time section of the manual on page 24 for details of other available clock settings.

] key to enter your time zone, then press and hold [ CLOCK SET ] key setting for the console. 10 10 The time will automatically sync with the internet time server at 12:00AM and 12:00PM each day. If you would like to force it to sync sooner than that, press the REFRESH button on the console to update the time in the next minute. ADVANCED SETTINGS VIA WEB INTERFACE Once you are connected via WI-FI to the display console and have opened the settings page at http://192.168.1.1, clicking on the tab that says ADVANCED will open the following page. This page will allow you to set and view specific calibration data of your display console, and also update the firmware if you are on PC. 20 ADVANCE SETTING IN WEB INTERFACE Press "ADVANCED" key at the top of web interface to enter the advance setting page, this page allow you to set and view the calibration data of the console, also you can update the Press ADVANCED icon to view the advanced settings page Humidity calibration section Select setting unit Select setting unit Temperature calibration section SETUP Language: English ADVANCED Temperature oC Humidity %

Indoor Outdoor CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 Current offset: 1 Current offset: -9 Current offset: 2 Current offset: 3 Current offset: 1.2 Current offset: -0.2 Current offset: -5 Current offset: 10 Current offset: -5 Current offset: -2 Current offset: -2 Current offset: -5 Current offset: -20.1 Current offset: -3 Current offset: 11.5 Current offset: -10 CH 7 Current offset: 0.2 Range: -20.0 ~ 20.0oC

-36.0 ~ 36.0oF (Default: 0.0) Current offset: -3 Range: -20 ~ 20

(Default: 0) Pressure calibration section Rain calibration section Wind calibration section Pressure hpa Absolute Pressure Offset:

Relative Pressure Offset:

Current offset: -3

(Default: 0) Current offset: 10

(Default: 0) Setting Range:

-800 ~ 800hpa / -23.62 ~ 23.62inHg / -601.5 ~ 601.5mmHg Rain gain:

Wind speed gain:

**Wind direction:

**UV gain:

Current gain: 0.85 Range: 0.5 ~ 1.5(Default: 1.00) Current gain: 0.75 Range: 0.5 ~ 1.5(Default: 1.00) Current offset: 2o Range: -10 ~ 10(Default: 0o) Current gain: 1.1 Range: 0.01 ~ 10(Default: 1.00)

** Depends on outdoor sensor type Function firmware version: 1.00 WiFi firmware version: 1.00 Advanced page Apply CALIBRATION 1. User may enter or change the offset and gain values for different measurement parameters in the SETUP page while current offset and gain values are shown next to their corresponding boxes. CALIBRATION 2. Once completed, press 1. You may enter or change the offset and gain values for different measurement parameters, The current offset value will show the previous value that you entered, if you want to change, while viewing the current offset and gain values next to the corresponding boxes. icon in just input the new value in the blank, the new value will valid once you press 2. Once you have completed your calibrations, press the APPLY button on the SETUP tab. SETUP page. 3. The current offset value will update to show the value that you entered (instead of the default NOTE:

value). If you want to change the value, you can enter a new value in the box beside the Calibration of most parameter is not required, with the exception of Relative Pressure, which number (as in step 1). To update the value, again, press APPLY in the SETUP tab. must be calibrated to sea-level to account for altitude effects. NOTE:

We do not recommend calibration of most values with the exception of Relative Pressure, which must be correctly calibrated to reflect your distance above sea level to account for altitude effects. VIEW YOUR WEATHER DATA IN WUNDERGROUND To view your weather station live data in a web browser (PC or mobile version), please visit http://www.wunderground.com, and then enter your Station ID in the searching box. Your weather data will show up on the next page. You can also login your account to view and download the recorded data of your weather station. Apply 21 VIEW YOUR WEATHER DATA IN WEATHER UNDERGROUND To view your weather station data live via PC or mobile web browser, visit http://www.wunderground. com, and then enter the Station ID you were provided during account setup in the search box. Your weather data will show up on the next page. Alternately, you can log in to your Weather Underground account to view and download the recorded data from your weather station. You can also use the Apple ipad's "WunderStation" app to login your own weather station to You can also use the Apple ipad's "WunderStation" app to login your own weather station to If you are using an iOS device, you can download the WunderStation app from the Apple App Store view the live data. view the live data. and login to your own weather station to view your data live. You can also use the Apple ipad's "WunderStation" app to login your own weather station to You can also use the Apple ipad's "WunderStation" app to login your own weather station to view the live data. view the live data. WunderStation WunderStation WunderStation WunderStation VIEWING YOUR WEATHER DATA IN WEATHERCLOUD VIEW YOUR WEATHER DATA IN WEATHERCLOUD 1 . To view your weather station live data in a web browser (PC or mobile version), please visit 1. To view your weather station data live via PC or mobile web browser, visit http://www. VIEWING YOUR WEATHER DATA IN WEATHERCLOUD VIEWING YOUR WEATHER DATA IN WEATHERCLOUD VIEWING YOUR WEATHER DATA IN WEATHERCLOUD https://weathercloud.net and sign in your own account. weathercloud.net and sign into the account you created. 1 . To view your weather station live data in a web browser (PC or mobile version), please visit 1 . To view your weather station live data in a web browser (PC or mobile version), please visit 2 . Click the pull down menu of your station. 1 . To view your weather station live data in a web browser (PC or mobile version), please visit 2. Click on the tab at the top of the page titled Devices. https://weathercloud.net and sign in your own account. https://weathercloud.net and sign in your own account. 3. Click on the Settings menu at the top right of the page, and select the option View. https://weathercloud.net and sign in your own account. pull down menu of your station. pull down menu of your station. icon inside the icon inside the icon inside the 2 . Click the 2 . Click the 2 . Click the icon inside the pull down menu of your station. 3 . Click "Current", "Wind", "Evolution" or "Inside" icon to view the live data of your weather 3 . Click "Current", "Wind", "Evolution" or "Inside" icon to view the live data of your weather 3 . Click "Current", "Wind", "Evolution" or "Inside" icon to view the live data of your weather 4. Click on either Current, Wind, Evolution, or Inside to view your weather stations data. station . station . station . 3 . Click "Current", "Wind", "Evolution" or "Inside" icon to view the live data of your weather station . FIRMWARE UPDATE The console supports OTA firmware update capability. Its firmware may be updated over the UPDATING THE FIRMWARE FIRMWARE UPDATE FIRMWARE UPDATE air anytime (whenever necessary) through any web-browser on a PC with WI-FI connectivity. This display console supports OTA (over the air) Function Firmware and WI-FI System Firmware The console supports OTA firmware update capability. Its firmware may be updated over the The console supports OTA firmware update capability. Its firmware may be updated over the Update function, however, is not available through mobile/smart devices. updates via any web browser (not mobile browser) on a PC that is connected to WI-FI. The update air anytime (whenever necessary) through any web-browser on a PC with WI-FI connectivity. air anytime (whenever necessary) through any web-browser on a PC with WI-FI connectivity. Two types of firmware updates are available, namely Function Firmware and System WI-FI Update function, however, is not available through mobile/smart devices. function for both types of updates can be found at the bottom of the Advanced Tab on the wireless Update function, however, is not available through mobile/smart devices. Firmware, and are located at the bottom of ADVANCED page. Two types of firmware updates are available, namely Function Firmware and System WI-FI Two types of firmware updates are available, namely Function Firmware and System WI-FI settings interface (see Advanced Settings via Web Interface on page 20. Firmware, and are located at the bottom of ADVANCED page. Firmware, and are located at the bottom of ADVANCED page. 22 Current Function air anytime (whenever necessary) through any web-browser on a PC with WI-FI connectivity. Update function, however, is not available through mobile/smart devices. Two types of firmware updates are available, namely Function Firmware and System WI-FI Firmware, and are located at the bottom of ADVANCED page. Current Function Current Function firmware version firmware version Current WI-FI Current WI-FI firmware version firmware version Follow the steps below to update your devices Function or WI-FI System Firmware 12 1. Download the latest version of the firmware (function or WI-FI) and save it to your PC. FIRMWARE UPDATE STEP Remember where you saved the file. 2. Press and hold the SENSOR/WI-FI button for six (6) seconds to put the display console into AP 1 . Download the latest version firmware (function or WI-FI) to your PC. mode, then connect the PC to the console (refer to steps in Set Up WI-FI Connection on page 18. 2 . Set the Console into AP (access point) mode then connect the PC to the console (ref to 3. Click the button that says Browse next to the appropriate type of update that you downloaded and navigate to the location where you saved the file. 4. Click the corresponding Upload button to transfer the update file to the console. FIRMWARE UPDATE STEP 1 . Download the latest version firmware (function or WI-FI) to your PC. 2 . Set the Console into AP (access point) mode then connect the PC to the console (ref to

"SETUP WI-FI CONNECTION" section in previous page).

"SETUP WI-FI CONNECTION" section in previous page). 3 . To update the Function firmware, click the in Function firmware section and 3 . To update the Function firmware, click the browse to the location of the file you download in step 1. To update the WI-FI firmware, click in Function firmware section and Browse Browse browse to the location of the file you download in step 1. To update the WI-FI firmware, click in WI-FI firmware section. 4 . Click the corresponding 4 . Click the corresponding to start in WI-FI firmware section. transfer the firmware file to console (indicated by to start a transfer completion %). Upload Upload Function firmware version: 1.00 C:\download\PWS_SYS.bin 30% ... WiFi firmware version: 1.00 transfer the firmware file to console (indicated by a transfer completion %). 3 Browse Upload Function firmware version: 1.00 C:\download\PWS_SYS.bin 30% ... Browse Upload 4 Browse Upload 5 . Once the console received the firmware file, it executes the update automatically as indicated by the update progress on display (i.e. 100 is 5. The file will install automatically once it is uploaded. You can view update progress on the Browse display console in the wind direction section (the number displayed will correspond to the percentage completed, so 50 = 50% and so on). Upload WiFi firmware version: 1.00 3 4 5 . Once the console received the firmware file, it executes the update automatically as indicated 6 . The console will restart once the update completed. by the update progress on display (i.e. 100 is

- Function and WI-FI firmware cannot be updated at the same time, you need to update one by 6 . The console will restart once the update completed.

- Please keep connecting the power during the firmware update process.

- Please make sure your PC's WI-FI connection is stable.

- When the update process start, do not operate the PC and console.

- During firmware update the console will stop upload data. It will reconnect to your WI-FI router and upload the data again once the update success. If the console cannot connect to your router, please end the SETUP page to setup again.

- After the firmware updates, user might need to input the Weather Underground ID and 23

- Function and WI-FI firmware cannot be updated at the same time, you need to update one by 6. The console will restart once the update completes. NOTES:

You cannot update the Function Firmware and WI-FI Firmware at the same time. Updates must be installed one by one. Make sure the power cable remains connected during the update process. Make sure your PCs wireless connection is stable. Once the update process starts, do not try to do anything else on your PC or on the display console. During the firmware update process, the console will stop uploading data temporarily. It will reconnect to your router and resume uploading data once the update is complete. If the console cannot connect to your router, you may need to set up the WI-FI connection again, following the steps on page 18. Once your firmware update completes, you may need to input your Weather Underground ID and password again on the SETUP tab of the wireless interface. OTHER CONSOLE SETTINGS AND FUNCTIONS MANUALLY SETTING THE TIME The display console is designed to synchronize with the internet time server to obtain the local time, but if you want to use it without connecting to your home wireless network, you can set the time manually. During initial setup, you will need to press and hold the SENSOR/WI-FI button for six (6) seconds, then let the display console return to normal mode. This will put it into offline mode for you to use it. 1. In normal operating mode while offline, press and hold the CLOCK SET button for two (2) seconds to enter the clock setting menu. 2. Press the or buttons to adjust the time zone. 3. Press the CLOCK SET button again to make adjustments to the next setting. 4. Settings will cycle through the following options: Time Zone > DST ON/OFF > Hour > Minute >

12/24-hour Format > Year > Month > Day > M-D/D-M Format > Time Sync ON/OFF > Language. 5. Press the CLOCK SET button one final time after adjusting all settings options to save and exit, or the console will automatically save and exit the menu after 60 seconds of idle time. NOTES:

In normal operating mode, press the CLOCK SET button once to switch between date and year display. While adjusting settings, you can press and hold the CLOCK SET button for two (2) seconds to return to normal mode. MOON PHASE The display console calculates the moon phase according to your time, date, and time zone. The table below explains the corresponding phases and their icons for both Northern and Southern hemispheres. Please refer to the section regarding Orienting the Wireless Weather Sensor Due South on page 25 for more information on setting up your Wireless Weather Sensor in the Southern Hemisphere. 24 Northern Hemisphere Icons Southern Hemisphere Icons Moon Phase New Moon Waxing Crescent Moon First Quarter Moon Waxing Gibbous Moon Full Moon Waning Gibbous Moon Third Quarter Moon Waning Crescent Moon Rising Steady Arrow Icon Temp/Humidity Trend POINTING THE WIRELESS WEATHER SENSOR TO SOUTH The outdoor wireless weather sensor is calibrated to be pointed North for maximum accuracy. However, for your convenience, if you are a user located in the Southern Hemisphere, you can use the sensor with the wind vane pointing South. 1. Mount and install the wireless weather sensor with the wind meter end pointed South, instead of North. (Please refer to the Installation Instructions on page 12 for mounting instructions.) 2. While the display console is in normal operating mode, press and hold the INDEX button for eight

(8) seconds until the N icon appears in the weekday section of the display to indicate the console is in sensor orientation mode. 3. Use the or buttons to change the orientation to Southern Hemisphere. The N should change to an S. 4. Press the INDEX button another time to confirm and exit the menu. Weak signal No signal Good signal Falling NOTES:

Changing the hemisphere setting will automatically switch the direction of the moon phases on the display. Pointing the wireless weather sensor toward the South will allow maximum sunlight on the solar panel, especially during the winter season in the Southern Hemisphere. Comfortable Too cold Too hot Alarm off Alarm on Alarm with ice-alert 25 First Quarter Moon Waxing Gibbous Moon Full Moon Third Quarter Moon Waning Gibbous Moon SETTING THE ALARM If youd like to use your display console as an alarm clock, follow these instructions to set the alarm time:

1. In normal operating mode, press and hold the ALARM button for two (2) seconds until the alarm hour starts flashing. This indicates that you have entered the alarm time setting mode. 2. Use the or buttons to adjust the alarm hour. Press and hold either button to move through the hours quickly. 3. Press the ALARM button again to confirm the alarm hour and move to adjusting the minutes. The minute digits should be flashing. 4. Use the or buttons to adjust the alarm minute. Press and hold either button to move Falling through the minutes quickly. 5. Press the ALARM button to save and exit the menu. Arrow Icon Temp/Humidity Trend Waning Crescent Moon Steady Rising NOTES:

Once you have an alarm set, the icon will be displayed next to the time on the LCD display. The alarm function will be activated automatically once you set a time. No signal Weak signal Good signal ACTIVATING/DEACTIVATING THE ALARM & TEMPERATURE PRE-ALARM The temperature pre-alarm will alert you 30 minutes prior to your alarm time whenever the outdoor temperature falls below 26.5F (-3C). 1. In normal operating mode, press the ALARM button to display the set alarm time for five (5) seconds. 2. When the alarm time is being shown on the LCD display, press the ALARM button again to cycle through the alarm functions as shown below. The corresponding icons will appear on the LCD display. Comfortable Too cold Too hot Alarm off Alarm on Alarm with ice-alert 3. When the clock reaches the designated alarm time, the alarm sound will start playing. 4. To stop the alarm:

a. Allow the alarm to continue for two minutes and it will stop itself automatically. It will remain set for the following day. b. Press the SNOOZE/BACKLIGHT button on top of the unit to snooze the alarm for five minutes. The snooze can be set continuously for 24 hours. We dont recommend doing that, though. While the console is in snooze mode, the alarm icon will continue flashing. c. Press and hold the SNOOZE/BACKLIGHT BELL for two (2) seconds to stop the alarm completely. It will stay set for the following day. d. Press the ALARM button to stop the alarm completely. It will remain set for the following day. 26 Full Moon Waning Gibbous Moon Third Quarter Moon TEMPERATURE/HUMIDITY & TRENDS Press the C/F button to switch between Celsius and Fahrenheit temperature measurements. The arrows show the trend in changes to the temperature/humidity levels. Waning Crescent Moon Rising Steady icon will display on the LCD. Arrow Icon NOTE:

Temp/Humidity Trend

- In alarm mode, the NOTE:

If/when the temperature outside falls below -40F (-40C), the LCD display will show the word Lo in the temperature section. If the temperature outside rises above 176F (80C), the LCD display will show the word, HI in the temperature section. Northern Hemisphere Icons If/when the humidity level falls below 1%, the LCD display will show the word Lo in the humidity section. If/when the humidity level rises above 99%, the LCD display will show the word, HI in the humidity section. Southern Hemisphere Icons Moon Phase New Moon Weak signal Good signal No signal Falling Waxing Crescent Moon Too cold Comfortable First Quarter Moon VIEWING OUTDOOR CHANNELS This console is capable of pairing with the wireless weather sensor and up to 7 additional wireless thermal-hygro sensors. If you have 2 or more sensors installed, press the CH button to cycle between different wireless channels in normal operating mode, or press and hold the CH button for two (2) seconds to toggle auto-cycle mode on, which cycles through displaying all connected channels at 4-second intervals. While the console is in auto-cycle mode, you can press the CH button once to toggle auto-cycle mode off and continue displaying the current channel. Waning Gibbous Moon Waxing Gibbous Moon Full Moon Too hot Alarm off Third Quarter Moon Alarm on Alarm with ice-alert Waning Crescent Moon RECEIVING WIRELESS SENSOR SIGNALS 1. While in normal operating mode, press the SENSOR/SYNC button once to start receiving the current sensor signal on the channel being displayed. (i.e. if youre on CH 1 and press the SENSOR/

SYNC button, the current wireless sensor signal being received will only display on CH 1.) The signal icon will start flashing. 2. The signal icon will continue flashing until it successfully receives a signal. If no signal is received within five (5) minutes, the icon will disappear. Arrow Icon Temp/Humidity Trend Steady Falling Rising No signal Weak signal Good signal Too cold Comfortable Too hot 27 Third Quarter Moon Waning Crescent Moon WIRELESS SENSOR SIGNAL RECEIVING 1 . The console display signal strength for the wireless 5-IN-1 sensor, as per table below:

3. If the signal for the outdoor channel has been interrupted and does not recover within 15 minutes, the signal icon will disappear. The temperature and humidity section (outdoor) will display on the corresponding channel. Arrow Icon 4. If the signal still does not recover within 48 hours, the display will become permanent. You will need to replace the batteries on the associated channels sensor and press the SENSOR/SYNC Temp/Humidity Trend button to pair up the sensors again. 5. After replacing batteries in the display console or the wireless weather sensor, or if the unit fails to receive a specified channel, press the SENSOR/SYNC button while the failed channel is being displayed to manually receive that sensors signal again. INDOOR COMFORT INDICATOR KEY The indoor comfort indicators display a pictorial representation based on the indoor air temperature and humidity levels to determine the approximate comfort level. 3 . If the signal does not recover within 48 hours, the Er display will become permanent. You need to replace the batteries and then press [ SENSOR / WI-FI] key to pair up the sensor No signal again . 2 . If the signal has discontinued and does not recover within 15 minutes, the signal icon will disappear. The temperature and humidity will display Er for the corresponding channel. Good signal Weak signal Weak signal Good signal No signal Steady Falling Rising Too cold Comfortable VIEW THE OUTDOOR CHANNEL (OPTIONAL FEATURE WITH ADD ON EXTRA THERMAL HYGRO SENSORS) This console is capable to pair with a wireless 5-IN-1 sensor and up to 7 wireless thermal-hygro sensors. If you have 2 or more sensors, you can press [ CHANNEL ] key to switch between different wireless channels in normal mode, or press and hold [ CHANNEL ] key for 2 seconds NOTE:

to toggle auto-cycle mode to display the connected channels at 4 seconds interval. During auto-cycle mode, press [ CHANNEL ] key to stop auto cycle and display the current Comfort indicator levels may vary even when the temperature is the same due to variances in relative channel . humidity levels. No comfort indicator will be displayed if the temperature falls below 32F (0C) or over 140F (60C). WIND WIND SPEED AND DIRECTION SECTION OVERVIEW WIND READOUTS Wind Direction Real time wind Real time wind Alarm with ice-alert direction indicator direction indicator Alarm off Alarm on Too hot Past wind Past wind directions indicator directions indicator of last 5 minutes of last 5 minutes Average / gust Average / gust wind speed wind speed TO SET THE WIND SPEED UNIT AND DIRECTION DISPLAY FORMAT 1 . In normal mode, press and hold [ WIND ] key for 2 seconds to enter into wind speed unit

] key to change the wind speed unit in this SELECTING WIND DISPLAY MODE While in normal operating mode, press the WIND button to switch between the average wind speed measurement and gust wind speed measurement. Set Wind Speed Units 1. While in normal operating mode, press and hold the WIND button for two seconds to enter the wind speed unit setting mode. The unit display will start flashing. Press the or buttons to cycle through the wind speed units in the following order: m/s > km/h > knots > mph TO SELECT THE WIND DISPLAY MODE In normal mode, press [ WIND ] key to switch between AVERAGE and GUST wind speed. mode and the unit will flash. Press [

sequence: m/s km/h knots mph 2 . Press [ WIND ] key again to return to normal mode.

] or [

28 WEATHER INDEX At the WEATHER INDEX section, you can press [ INDEX ] key to view the weather index in this sequence: FEELS LIKE HEAT INDEX WIND CHILL DEWPOINT. 7 6 High wind Strong breeze Level 8 Speed leaf begin to sway. Wind Speed Level Wind Speed Level Chart Light Gale 0.1~11.8 mph 2. Press [ WIND ] key again to enter into wind direction display format setting mode. The wind Whole trees in motion. Effort needed to walk against the wind. 3. Press [ WIND ] key again to return to normal mode. To set the wind speed unit and direction display format 1. In normal mode, press and hold [ WIND ] key for 2 seconds to enter into wind speed unit

[ GRAPH /

change the wind speed unit in this sequence: m/s km/h knots mph 2. Press the WIND button again to return to normal display mode.

[ GRAPH /

. Large branches in motion.

] or [ HISTORY / V ] key to Whistling heard in overhead wires. Umbrella use becomes difficult. Empty plastic bins tip over.

] or [ HISTORY / V ] key to select 3. Press the WIND button while in normal operating mode to switch between AVERAGE and GUST the display format 16 direction or relative degree reading. wind speeds. 17 ~ 21 knot 8 0 ~ 10 7 m/s

. 39 ~ 49 km/h 25 ~ 30 mph 22 ~ 27 knot 10 8 ~ 13 8 m/s

. 50 ~ 61 km/h 31 ~ 38 mph 28 ~ 33 knot 13 9 ~ 17 1 m/s

. 62 ~ 74 km/h Moderate 39 ~ 46 mph 12~30.4 mph 34 ~ 40 knot 17.2 ~ 20.7 m/s WEATHER INDEXES 75 ~ 88 km/h When reading the Weather Index display, you can press the INDEX button to cycle through different 47 ~ 54 mph weather indexes in the following order: Feels Like > Heat Index > Wind Chill > Dewpoint. 41 ~ 47 knot 20.8 ~ 24.4 m/s Feels Like 89 ~ 102 km/h 55 ~ 63 mph The Feels Like temperature index determines what temperature it actually feels like outside, taking 10 48 ~ 55 knot into account factors like wind chill and the heat index. 24.5 ~ 28.4 m/s 103 ~ 117 km/h 64 ~ 73 mph 56 ~ 63 knot 28.5 ~ 32.6 m/s Wind Chill 11 Wind chill is determined by a combination of the wireless weather sensors temperature and wind speed data. Some branches break off trees, and some small trees blow over. Construction/temporary signs and barricades blow over. Some twigs broken from Storm trees. Cars veer on the

>55 mph road. Progress on foot is seriously impeded. Trees are broken off or uprooted, structural Strong 31~54.7 mph and structural damage likely. Widespread vegetation damage likely. Violent storm Strong gale Storm 9 Severe widespread damage to Heat Index vegetation and structures. 12 The heat index is determined by the wireless weather sensors temperature and humidity readings Debris and unsecured objects when the temperature outdoors is between 80F (27C) and 120F (50C). are hurled about. Hurricane force 118 km/h 74 mph 64 knot 32.7m/s Heat Index range 80F to 90F (27C to 32C) 91F to 105F (33C to 40C) 106F to 129F (41C to 54C) 130F ( 55C) Warning Caution Extreme Caution Danger Extreme Danger Explanation Possibility of heat exhaustion Possibility of heat dehydration Heat exhaustion likely Strong risk of dehydration / sun stroke Dew Point The dew point is the temperature below which the water vapor in air at constant barometric pressure condenses into liquid water at the same rate at which it evaporates. The condensed water is called dew when it forms on a solid surface. The dew point temperature is determined by the temperature and humidity data from the wireless weather sensor. Rainy / Stormy Partly cloudy Cloudy Snowy Sunny Rainy Absolute Relative The absolute atmospheric pressure of your location The relative atmospheric pressure based on the sea level 29

. 8 9 Gale Storm Rainy Cloudy Cloudy Strong gale Partly cloudy seriously impeded. Rainy / Stormy Empty plastic bins tip over. Some twigs broken from trees. Cars veer on the road. Progress on foot is The built-in barometer can notice atmosphere pressure changes. Based on the data collected, it can predict the weather conditions in the forthcoming 12~24 hours within a 30~50km (19~31 are hurled about. Whole trees in motion. Explanation Effort needed to walk against the wind. Possibility of heat exhaustion Possibility of heat dehydration Heat exhaustion likely Strong risk of dehydration / sun stroke Heat Index range High wind WEATHER FORECAST 80F to 90F (27C to 32C) 91F to 105F (33C to 40C) The built-in barometer can notice atmospheric pressure changes, and based on the data collected, can predict the weather conditions in the forthcoming 12-24 hours within a 19 ~ 31 mile (30 ~ 50 106F to 129F (41C to 54C) km) radius. 130F ( 55C) 64 knot 10 8 ~ 13 8 m/s

. 32.7m/s 50 ~ 61 km/h

- The dew point is the temperature below which the water vapor in air at constant barometric 31 ~ 38 mph Warning pressure condenses into liquid water at the same rate at which it evaporates. The condensed 7 28 ~ 33 knot water is called dew when it forms on a solid surface. Caution 13 9 ~ 17 1 m/s

- The dew point temperature is determined by the temperature & humidity data from wireless Extreme Caution 62 ~ 74 km/h Danger 39 ~ 46 mph 34 ~ 40 knot Extreme Danger 17.2 ~ 20.7 m/s 75 ~ 88 km/h 47 ~ 54 mph 41 ~ 47 knot 20.8 ~ 24.4 m/s Sunny 89 ~ 102 km/h 55 ~ 63 mph 10 NOTE:

48 ~ 55 knot Rainy Snowy The accuracy of a general pressure-based forecast is about 70% - 75%. Forecasts are not 24.5 ~ 28.4 m/s guaranteed. 103 ~ 117 km/h

- The accuracy of a general pressure-based weather forecast is about 70% to 75%. The forecast section reflects a general prediction for the next roughly 12 ~ 24 hours. It may not 64 ~ 73 mph

- The weather forecast is reflecting the weather situation for next 12~24 hours, it may not necessarily reflect the current situation. 56 ~ 63 knot necessarily reflect the current situation. The SNOWY weather forecast is not based on the atmospheric pressure, but based on the current 28.5 ~ 32.6 m/s

- The SNOWY weather forecast is not based on the atmospheric pressure, but based on the temperature reading from that wireless sensor. When the outdoor temperature is below ~ 26F 118 km/h temperature of outdoor. When the temperature is below -3C (26F), the SNOWY weather

(-3C), the SNOWY weather indicator will be shown on the LCD display. 74 mph 64 knot 32.7m/s Some branches break off trees, and some small trees blow over. Construction/temporary signs and barricades blow over. Rainy / Stormy Snowy Trees are broken off or uprooted, structural The absolute atmospheric pressure of your location The relative atmospheric pressure based on the sea level BAROMETRIC PRESSURE The atmospheric pressure is the pressure at any location of Explanation Heat Index range the earth caused by the weight of the column of air above it. Possibility of heat exhaustion 80F to 90F (27C to 32C) One atmospheric pressure refers to the average pressure and gradually decreases as altitude increases. Meteorologists use Possibility of heat dehydration 91F to 105F (33C to 40C) barometers to measure atmospheric pressure. Since variation in Heat exhaustion likely 106F to 129F (41C to 54C) atmospheric pressure greatly affected by weather, it is possible to The atmospheric pressure is the pressure at any location on Earth caused by the weight of the 130F ( 55C) Strong risk of dehydration / sun stroke forecast the weather by measuring the changes in pressure. column of air directly above that location. The average pressure gradually decreases as the altitude increases. Meteorologists use barometers to measure atmospheric pressure. Since variation in atmospheric pressure can be greatly affected by the weather, it is possible to forecast the weather by measuring these changes in pressure. Set Barometer Units 17 1. In normal operating mode, press the BARO button to cycle through options for the barometer units of measure in the following order: hPa > inHg > mmHg. 2. While in normal operating mode, press and hold the BARO button to switch between ABSOLUTE and RELATIVE barometric pressure displays. In normal mode, press [ BARO UNIT ] key to change the barometer unit in this sequence: hPa Warning Caution Extreme Caution Danger Extreme Danger Severe widespread damage to vegetation and structures. Debris and unsecured objects and structural damage likely. Widespread vegetation Absolute Relative Rainy / Stormy are hurled about. Partly cloudy Hurricane force damage likely. Violent storm Cloudy Snowy Sunny Rainy 12 11 Absolute Relative The absolute atmospheric pressure of your location The relative atmospheric pressure based on the sea level 30 The RAINFALL section shows the rainfall and rain rate RAINFALL The Rainfall shows information regarding the rainfall and rain rate. 1 . Press and hold [ RAIN ] key for 2 seconds to enter unit setting mode. 2 . Press [ ] or [ V ] key to toggle the rainfall unit between mm and in. 3 . Press [ RAIN ] key to confirm and exit the setting. Set the Rainfall Units 1. Press and hold the RAIN button for two (2) seconds to enter unit setting mode. 2. Press the or buttons to toggle the units of measure for rainfall between mm and in. 3. Press the RAIN button again to save and exit the setting mode. TO SELECT THE RAINFALL DISPLAY MODE Press [ RAIN ] key to toggle between:

1. HOURLY - the total rainfall in the past hour 2. DAILY - the total rainfall from midnight 3. WEEKLY - the total rainfall of the current week 4. MONTHLY- the total rainfall of the current calendar month 5. Total - the total rainfall since the last reset 6. Rate - Current rainfall rate in past an hour (Update every 24 seconds) TO RESET THE TOTAL RAINFALL RECORD In normal mode, press and hold [ HISTORY ] key for 2 seconds to reset all the rainfall record. To ensure correct data, please reset all the rainfall record when you reinstall your wireless 5-IN-

Select the Rainfall Display Mode Press the RAIN button to toggle between:

1. HOURLY: total rainfall in the past hour 2. DAILY: total rainfall since midnight 3. WEEKLY: total rainfall for the current week 4. MONTHLY: total rainfall since the beginning of the current month 5. RATE: current rainfall rate in the past hour (updates every 24 seconds) 6. ACCUMULATION: total rainfall since the last reset (will show the record start date on the display for five seconds) Reset the Accumulating Rainfall Record While in normal operating mode, press and hold the C/F button for two (2) seconds to reset the ACCUMULATION rainfall record. NOTE:

To ensure precise data, please reset the ACCUMULATION rainfall record whenever you move and reinstall your wireless weather sensor to a different location. The console can record the accumulated MAX / MIN weather data with the corresponding time TO VIEW THE ACCUMULATED MAX / MIN In normal mode, press [ MAX / MIN ] key to check MAX/MIN records. The display sequence is:

indoor (or current channel) MAX temperature indoor (or current channel) MIN temperature indoor (or current channel) MAX humidity indoor (or current channel) MIN humidity outdoor MAX temperature outdoor MIN temperature outdoor MAX humidity outdoor MIN humidity MAX average wind speed MAX gust MAX relative pressure MIN relative pressure MAX absolute pressure MIN absolute pressure MAX FEELS LIKE MIN FEELS LIKE MAX heat index MIN heat index MAX wind chill MIN wind chill MAX dew point MIN dew point MAX daily rainfall. MAX/MIN DATA RECORD The display console can record the accumulated and daily MAX/MIN weather data with a corresponding time stamp for you to review. View the Daily MAX/MIN While in normal operating mode, press the MAX/MIN button to cycle through the daily MAX/MIN records. Records are displayed in the following order:

TO CLEAR THE MAX/MIN RECORDS Press and hold [ MAX / MIN ] key for 2 seconds to reset the MAX/MIN records of specify 31 Indoor* daily MAX temperature > indoor* daily MIN temperature > indoor* daily MAX humidity >

indoor* daily MIN humidity > outdoor daily MAX temperature > outdoor daily MIN temperature >

outdoor daily MAX humidity > outdoor daily MIN humidity > daily MAX average wind speed > daily MAX gust > daily MAX relative pressure > daily MIN relative pressure > daily MAX absolute pressure

> daily MIN absolute pressure > daily MAX feels like temperature > daily MIN feels like temperature >

daily MAX heat index > daily MIN heat index > daily MAX wind chill > daily MIN wind chill > daily MAX dew point > daily MIN dew point > daily MAX rainfall

* or current display channel sensor Reset the Accumulated MAX/MIN Records Press and hold the MAX/MIN button for two (2) seconds to reset the MAX/MIN records of the specific weather display section. History Data for Past 24 Hours The display console automatically stores the weather data from the past 24 hours. 1. Press the HISTORY button to check the beginning of the current hours weather data, e.g., if the current time is 7:25 AM on Dec 1st, the display will show the data for 7:00 AM on Dec 1st. 2. Press the HISTORY button to view the older readings for each hour of the past 24 hours, e.g. 6:00 AM (Dec 1st), 5:00 AM (Dec 1st), , 10:00 AM (Nov 30th), 9:00 AM (Nov 30th), 8:00 AM (Nov 30th). NOTE: The LCD display will also show the History icon, along with the time and date, when displaying the history data records. WEATHER ALERT SETTINGS The Weather Alert can alert you to certain weather conditions by activating an alarm sound and flashing the LCD displays alert icon when specific criteria are met. To Set the Alert 1. Press the ALERT button to cycle through and display the desired weather alert options in the following order:

Alert Option Sequence High Outdoor Temperature Alert

(current channel) Low Outdoor Temperature Alert

(current channel) High Outdoor Humidity Alert Low Outdoor Humidity Alert High Indoor Temperature Alert Low Indoor Temperature Alert High Indoor Humidity Alert Low Indoor Humidity Alert Wind Speed Alert Default Setting 104F (40C) 104F (40C) 32F (0C)

-40F ~ 176F

(-40C ~ 80C)

-40F ~ 176F

(-40C ~ 80C) Outdoor temperature &

Wind direction & speed Indoor temperature &

Display Section Setting Range 32F (0C) 1% ~ 99%

1% ~ 99%

80%

40%

humidity humidity 0.1 m/s ~ 50 m/s

(0.1 ~ 180 km/h 0.1 ~ 112 mph 0.1 ~ 97 knots) 1hPa ~ 10hPa Barometer & Rainfall 80%

40%

17.2 m/s

(62 km/h 39 mph 34 knots) 3hPa 32 Pressure Drop Alert 0C 80%

40C humidity 1% ~ 99%

-40C ~ 80C Indoor temperature &

Pressure Drop Alert Hourly Rainfall Alert

(-40C ~ 80C)

-40C ~ 80C 1% ~ 99%

Indoor / CH Indoor / CH Wind direction & speed temperature & humidity temperature & humidity Low Indoor Temperature Alert 32F (0C) Indoor Temperature High Alert Indoor Temperature High Alert 40C

(current channel)

(current channel) High Indoor Humidity Alert 80%

Indoor Temperature Low Alert Indoor Temperature Low Alert Low Indoor Humidity Alert 40%

0C

(current channel)

(current channel) Wind Speed Alert 17.2 m/s Indoor Humidity High Alert Indoor Humidity High Alert 80%

(62 km/h

(current channel)

(current channel) 39 mph Indoor Humidity Low Alert Indoor Humidity Low Alert 34 knots) 40%

(current channel)

(current channel) 3hPa Outdoor Temperature High Alert Outdoor Temperature High Alert 40C Outdoor Temperature Low Alert Outdoor Temperature Low Alert 0C Outdoor Humidity High Alert Outdoor Humidity High Alert 80%

Low Wind Chill Alert 32F (0C) Outdoor Humidity Low Alert 40%

Outdoor Humidity Low Alert High Dew Point Alert 50F (10C) Average Wind Speed Average Wind Speed 17.2mm/h 14F (-10C) Low Dew Point Alert Pressure Drop 3hPa Pressure Drop 3hPa 95F (35C) High Heat Index Alert 2. While on the alert option you want to set, press and hold the ALERT button for two (2) seconds to Hourly Rainfall 100mm 100mm Hourly Rainfall enter that alerts settings mode. The alert option will start flashing. 2 . Under the current alert reading, press and hold [ ALERT ] key for 2 seconds to enter alert 2 . Under the current alert reading, press and hold [ ALERT ] key for 2 seconds to enter alert High Beaufort Scale Alert 3. Press the or buttons to adjust the value, or press and hold the buttons to adjust the value setting and the alert reading will flash. setting and the alert reading will flash. more quickly. 3 . Press [ ] or [ V ] key to adjust the value or press and hold the key to change rapidly. 3 . Press [ ] or [ V ] key to adjust the value or press and hold the key to change rapidly. 4. Press the ALERT button when the desired value is reached to save the alert setting, then press the 4 . Press [ ALERT ] key to confirm the value. 4 . Press [ ALERT ] key to confirm the value. ALARM button to toggle the weather alert on or off. 5 . Press [ ALARM ] key to toggle the regarding alert on / off. 5 . Press [ ALARM ] key to toggle the regarding alert on / off. 6 . Press [ ALERT ] key to step to next alert reading. 6 . Press [ ALERT ] key to step to next alert reading. 0.1 m/s ~ 50 m/s

(0.1 ~ 180 km/h 1% ~ 99%

0.1 ~ 112 mph 0.1 ~ 97 knots) 1hPa ~ 10hPa

-40C ~ 80C 0.04 in ~ 39 in

(1 mm ~ 1000 mm)

-40F ~ 140F 1% ~ 99%

(-40C ~ 60C) 0.1m/s ~ 50m/s Wind direction & speed 1hPa ~ 10hPa 81F ~ 120F 1mm ~ 1000mm

(27C ~ 49C) 0.1m/s ~ 50m/s Wind direction & speed 1hPa ~ 10hPa 1mm ~ 1000mm Barometer & Rainfall Outdoor temperature &

Outdoor temperature &

40%

40C 0C 80%

40%

humidity Weather index

-40C ~ 80C 4 in (100 mm) Barometer Barometer 1% ~ 99%

17.2mm/h humidity Rainfall Rainfall 1 ~12 6 High / Low High /Low Alert on Alert on High /Low Alert on Alert off Alert off Alert off Alert on Alert on Alert off Alert off 7 . Press any key on the front side to save alert on /off status and back to normal mode, or it 7 . Press any key on the front side to save alert on /off status and back to normal mode, or it 5. Press any button on the front of the display console to save and return to normal mode, or wait 30 will automatically back to normal mode after 30 seconds without pressing any key. will automatically back to normal mode after 30 seconds without pressing any key. seconds without pressing any buttons and the alert will save itself and return to normal mode. To Silence the Weather Alert Alarm 19 19 Press the SNOOZE/LIGHT button on top of the display console to silence the alarm, or it will automatically turn off after two (2) minutes. NOTES:

Once the alert is triggered, the alarm will sound for two (2) minutes and the associated alert icon and weather readings will flash. If the alert alarm automatically shuts off after two (2) minutes instead of being manually shut off, the associated alert icon and readings will continue flashing until the reading is out of the alert range. The weather alert alarm will go off once the readings fall into alert range again. 33

- Once the alert is triggered, the alarm will sound for 2 minutes and the related alert icon and

- If the alert alarm is automatically off after 2 minutes, the alert icon and readings will still keep flash until the weather reading is out of the alert range.

- The weather alert will sound again when the weather readings falls into the alert range again. BATTERY REPLACEMENT If the low battery indicator power is low . You should replace all the batteries in the console at once displayed in outdoor section, it indicates that the current channel If the low battery indicator wireless outdoor sensor battery power is low . You should replace all the batteries in the current CARE AND MAINTENANCE BATTERY REPLACEMENT If the low battery indicator icon is displayed in the outdoor temperature and humidity section or the corresponding CH section of the LCD console display, this indicates that the batteries in your wireless weather sensor are running low and should be replaced. Make sure to replace all batteries at the same time. displayed in time section, it indicates that the console battery displayed in OUT or CH section, it indicates that the current channel wireless or outdoor 5-in-1 sensor battery power is low. You should replace all the batteries in the Low battery indicator for main unit 1 . Unscrew the rain collector by turning it 30anti-clockwise. Low battery indicator for wireless sensor CLEANING THE RAIN COLLECTOR 1. Rotate the rain collector by 30 counter-clockwise until it is in the unlock position as shown. N N N 4 . Install the collector when it is clean and fully dried. CLEANING THE RAIN COLLECTOR 1 . Rotate the rain collector by 30 anticlockwise . 2 . Gently remove the rain collector . 3 . Clean and remove any debris or insects . 4 . Install all the parts when they are fully clean N N N Lock Position Unlock Position CLEANING HYGRO-THERMO SENSOR OF WIRELESS 5-IN-1 SENSOR 1 . Remove the 2 screws at the bottom of the radiation shield. Lock Position Unlock Position 3 . Carefully remove any dirt or insects on the sensor casing (do not TO CLEAN THE THERMO/HYGRO SENSOR 2. Gently remove the rain collector. 3. Clean and remove any debris or insects. 1 . Unscrew the 2 screws at the bottom of the radiation shield . 4. Wait until the parts are fully dry, and then reinstall them, and return the rain collector to a locked 2 . Gently pull out the shield . 4 . Clean the shield with water to remove any dirt or insects. position. 3 . Remove carefully any dirt or insects inside the sensor casing (Do not let the sensors inside get 5 . Install all the parts back when they are clean and fully dried. 4 . Clean the shield with water and remove any dirt or insects . CLEANING THE THERMO/HYGRO SENSOR 5 . Install all the parts back when they are fully clean and dried . 1. Unscrew the 2 screws at the bottom of the sensor casing. 2. Gently pull out the shield. 3. Carefully remove any dirt or insects inside the sensor casing, making sure the inside sensors remain dry. 4. Clean the shield with water and remove any dirt or insects. 5. Once the parts are fully clean and dry, reinstall them and replace the screws.

- Keep and reading the User manual is highly recommended. The manufacturer and supplier cannot accept any responsibility for any incorrect readings, export data lost and any consequences that occur should an inaccurate reading take place.

- This product is designed for use in the home only as indication of weather conditions. This product is not to be used for medical purposes or for public information

- Do not subject the unit to excessive force, shock, dust, temperature or humidity.

- Do not cover the ventilation holes with any items such as newspapers, curtains etc.

- Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft, lint-

- Keep and reading the User manual is highly recommended . The manufacturer and supplier cannot accept any responsibility for any incorrect readings, export data lost and any consequences that occur should an inaccurate reading take place .

- Do not subject the unit to excessive force, shock, dust, temperature or humidity .

- Do not cover the ventilation holes with any items such as newspapers, curtains etc .

- Do not immerse the unit in water . If you spill liquid over it, dry it immediately with a soft, lint-

- Do not clean the unit with abrasive or corrosive materials .

- Do not tamper with the units internal components . This invalidates the warranty .

- Do not clean the unit with abrasive or corrosive materials.

- Only use fresh batteries . Do not mix new and old batteries .

- Do not tamper with the units internal components. This invalidates the warranty.

- Only use attachments / accessories specified by the manufacturer.

- Placement of this product on certain types of wood may result in damage to its finishing

- Images shown in this manual may differ from the actual display . for which manufacturer will not be responsible. Consult the furniture manufacturers care

- When disposing of this product, ensure it is collected separately for special treatment . 34 SPECIFICATIONS DISPLAY CONSOLE SPECIFICATIONS DISPLAY CONSOLE General Specications Dimensions (W x H x D) Weight Power source Backup battery Operating temperature range WI-FI Communication Specications Wi-Fi standard Wi-Fi operating frequency Router security type Supported devices for setup UI 5.4 x 6.6 x 1 (117 x 189 x 31mm) 0.82 lb. (370g) with batteries DC 5V, 1A adaptor CR2032, 3V battery 23F ~ 122F (-5C ~ 50C) 802.11 b/g/n 2.4GHz WPA/WPA2, OPEN, WEP (WEP will only support a hexadecimal password) Smart devices, tablets, laptops, or PCs with built-in WI-FI and AP mode functionality such as: Android phone or tablet, iPhone or iPad, or a Windows laptop/PC Latest version of any web browser that supports HTML 5 1 Wireless 5-in-1 weather outdoor sensor and up to 7 optional wireless hygro-thermo outdoor sensors 868 MHz (EU or UK version), 915 MHz (US version), 917 MHz (AU version) 492 ft (150m) Recommended web browser version Wireless Sensor Communication Specications Supported sensors RF frequency RF transmission range Time Function Specications HH: MM: SS Time display 12 hour or 24 hour Hour format Date display DD / MM or MM / DD Synchronizes with UTC clock through internet time server Time synchronization method EN / DE / FR / ES / IT / NL / RU Weekday languages GMT +13 ~ GMT -12 Time zones ON / OFF DST Barometer Display & Function Specications Note:

Barometer units Measuring range The following details are listed as they are displayed or operate on the console. hPa, inHg, and mmHg 540 ~ 1100 hPa (relative setting range 930 ~ 1050 hPa)

(700 ~ 1100 hPa 5 hPa) / (540 ~ 696 hPa 8 hPa)

(20.67 ~ 32.48 inHg 0.15 inHg) / (15.95 ~ 20.55 inHg 0.24 inHg)

(525 ~ 825mmHg 3.8mmHg) / (405 ~ 522 mmHg 6 mmHg) Typical at 77F (25C) 1hPa / 0.01inHg / 0.1mmHg Sunny, Partly Cloudy, Cloudy, Rainy, Rainy / Stormy and Snowy Current Historical data of past 24 hours, daily Max / Min Pressure change alert Resolution Weather forecast Display modes Memory modes Alarm Indoor / Outdoor Temperature Display & Function Specications Note:

Temperature unit Display range C and F

-40 ~ 176F (-40 ~ 80C)

>104F 3.6F (>40C 2C) The following details are listed as they are displayed or operate on the console. Accuracy 35 Sunny, Partly Cloudy, Cloudy, Rainy, Rainy / Stormy and Snowy Current Historical data of past 24 hours, daily Max / Min Pressure change alert Outdoor Accuracy Outdoor Accuracy The following details are listed as they are displayed or operate on the console. Weather forecast Display modes Memory modes Alarm Indoor / Outdoor Temperature Display & Function Specications Note:

Temperature unit Display range Indoor Accuracy C and F

-40 ~ 176F (-40 ~ 80C)

>104F 3.6F (>40C 2C) 32F ~ 104F 1.8F (0~40C 1C)

< 32F 3.6F (< 0C 2C) 131F ~ 140F 0.9F (55C ~ 60C 0.5C) 50F ~ 131F 0.7F (10C ~ 55C 0.4C)

-4F ~ 50F 2.3F (-20C ~ 10C 1.3C)

-40F ~ -4F 3.4F (-40C ~ -20C 1.9C) Resolution 0.1F / 0.1C Display modes Current Memory modes Historical data of past 24 hours, daily Max / Min High / Low temperature alert Alarm Indoor / Outdoor Humidity Display & Function Specications Note: The following details are listed as they are displayed or operate on the console. Humidity unit Display range Indoor Accuracy

1 ~ 99%

20~39% RH 8%RH @ 77F (25C) 40~70% RH 5%RH @ 77F (25C) 71~90% RH 8%RH @ 77F (25C) 1 ~ 90% RH 2.5% RH @ 77F (25C) 90 ~ 99% RH 3.5% RH @ 77F (25C) 1%

Resolution Current Display modes Historical data of past 24 hours, daily Max / Min Memory modes High / Low Humidity Alert Alarm Wind Speed & Direction Display and Function Specications Note:

Wind speed unit Wind speed display range Resolution Speed accuracy Display mode Memory modes Alarm Wind direction Rain Display & Function Specications Note:

Unit for rainfall Accuracy for rainfall Range of rainfall Resolution Display modes Memory modes Rainfall display mode Alarm Weather Index Display & Function Specications Note:

Weather index mode Beaufort scale mm and in 7%

0 ~ 19999mm (0 ~ 787.3 in) 0.254mm (0.01in) Current Historical Data of past 24 hours, daily Max Hourly / Daily / Weekly / Monthly / Total rainfall High Hourly Rainfall Alert Beaufort, Wind Chill, Heat Index and Dew point 0 ~ 12 The following details are listed as they are displayed or operate on the console. The following details are listed as they are displayed or operate on the console. The following detail are listed as they are displayed or operate on the console. mph, m/s, km/h and knots 0 ~ 112mph, 50m/s, 180km/h, 97knots 0.1mph, 0.1m/s, 0.1km/h, 0.1knots 2.2 mph or 10% (whichever is greater) Gust / Average Historical Data of past 24 hours, daily Max Gust/ Average Hi Wind Speed Alert (Average / Gust) 16 direction 36 The following details are listed as they are displayed or operate on the console. Current Historical Data of past 24 hours, daily Max Hourly / Daily / Weekly / Monthly / Total rainfall High Hourly Rainfall Alert Beaufort, Wind Chill, Heat Index and Dew point 0 ~ 12

-40F ~ 64.4F (-40C ~ 18C), wind speed > 4 .8km/h 78.8F ~ 122F (26C ~ 50 C)

-4F ~ 140F (-20C ~ 60C) Current Historical Data of past 24 hours, Daily Max / Min Display modes Memory modes Rainfall display mode Alarm Weather Index Display & Function Specications Note:

Weather index mode Beaufort scale Wind Chill range Heat index range Dew point range Display modes Memory modes Wireless 5-in-1 Sensor Specications Dimensions (W x H x D) Weight Main power source Weather data recorded RF Transmission range RF frequency Transmission interval Operating range 13.5 x 15.5 x 5.35 (343.5 x 393.5 x 136 mm) 1.62 lb. (734g) with batteries 3 x AA 1.5V batteries (lithium batteries recommended) Temperature, humidity, wind speed, wind direction, and rainfall 492 ft (150m) 868 MHz (EU or UK version), 915 MHz (US version), 917 MHz (AU version) Every 12 seconds: wind speed and wind direction Every 24 seconds: temperature, humidity, and rain

-40F ~ 140F ( -40C ~ 60C) FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and;

(2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generatesand can radiateradio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the equipment does not cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna Increase the separation between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCCs RF exposure guidelines, place the unit at least 20cm from nearby persons. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 37 WARRANTY INFORMATION LIMITED WARRANTY ON LOGIA 5-IN-1 WIRELESS WEATHER STATION WITH WI-FI THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. WE WARRANT THAT DURING THE WARRANTY PERIOD, THE PRODUCT WILL BE FREE FROM DEFECTS IN MATERIALS AND WORKMANSHIP. LIMITATION OF LIABILITY TO THE EXTENT NOT PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, ORAL, WRITTEN, STATUTORY, EXPRESS OR IMPLIED. EXCEPT FOR THE EXPRESS WARRANTIES CONTAINED IN THIS LIMITED WARRANTY STATEMENT AND TO THE EXTENT NOT PROHIBITED BY LAW, WE DISCLAIM ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, STATUTORY OR OTHERWISE, PARTICULAR PURPOSE. SOME STATES DO NOT ALLOW DISCLAIMERS OF IMPLIED WARRANTIES, SO THIS INCLUDING WITHOUT LIMITATION, THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A DISCLAIMER MAY NOT APPLY TO YOU. TO THE EXTENT SUCH WARRANTIES CANNOT BE DISCLAIMED UNDER THE LAWS OF YOUR JURISDICTION, WE LIMIT THE DURATION AND REMEDIES OF SUCH WARRANTIES TO THE DURATION OF THIS EXPRESS LIMITED WARRANTY. OUR RESPONSIBILITY FOR DEFECTIVE GOODS IS LIMITED TO REPAIR, REPLACEMENT OR REFUND AS DESCRIBED BELOW IN THIS WARRANTY STATEMENT. WHO MAY USE THIS WARRANTY? C&A Marketing, Inc. located at 114 Tived Lane East, Edison, NJ (we) extend this limited warranty only to the consumer who originally purchased the product (you). It does not extend to any subsequent owner or other transferee of the product. WHAT DOES THIS WARRANTY COVER? This limited warranty covers defects in materials and workmanship of the Logia 5-in-1 Wireless Weather Station with WI-FI (the product) for the Warranty Period as defined below. WHAT DOES THIS WARRANTY NOT COVER? This limited warranty does not cover any damage due to: (a) transportation; (b) storage; (c) improper use; (d) failure to follow the product instructions or to perform any preventive maintenance; (e) modifications;

(f) unauthorized repair; (g) normal wear and tear; or (h) external causes such as accidents, abuse, or other actions or events beyond our reasonable control. WHAT IS THE PERIOD OF COVERAGE? This limited warranty starts on the date of your purchase and lasts for one year (the Warranty Period). The Warranty Period is not extended if we repair or replace the product. We may change the availability of this limited warranty at our discretion, but any changes will not be retroactive. WHAT ARE YOUR REMEDIES UNDER THIS WARRANTY? With respect to any defective product during the Warranty Period, we will, at our sole discretion, either: (a) repair or replace such product (or the defective part) free of charge or (b) refund the purchase price of such product if an exchange unit cannot be provided. HOW DO YOU OBTAIN WARRANTY SERVICE? To obtain warranty service, you must contact us at 1-833-815-0568 or by email at info@supportcbp.com during the Warranty Period to obtain a Defective Merchandise Authorization

(DMA) number. No warranty service will be provided without a DMA number and return shipping costs to our facilities shall be assumed by you, the purchaser. Shipping costs of the replacement unit to you shall be assumed by us. 38 If you experience any issues with your Logia 5-in-1 Wireless Weather Station with WI-FI, please contact us before returning your product to the place of purchase. Were here to help!

QUESTIONS OR PROBLEMS? CONTACT US!

Email: info@supportcbp.com or call: 1-833-815-0568 www.logiaweatherstation.com 39 LOGIA is a trademark of C&A IP Holdings, LLC, in the U.S. Android is a trademark of Google LLC. Apple and App Store are trademarks of Apple Inc. in the U.S. and other countries. IOS is a trademark of Cisco in the U.S. and other countries and is used under license. Microsoft, Windows, Windows Server, Windows Vista, and Windows 10 are trademarks of Microsoft Corporation in the U.S. and/or other countries. WI-FI, WPA, and WPA2 are trademarks of WI-FI Alliance in the U.S. and/or other countries. All other products, brand names, company names, and logos are trademarks of their respective owners, used merely to identify their respective products, and are not meant to connote any sponsorship, endorsement or approval. Distributed by C&A Marketing, Inc., 114 Tived Lane East, Edison, NJ 08837. Made in China. 2019. C&A IP Holdings, LLC. All Rights Reserved.

Film Size: 21 x 7mm 168 mm MADE IN CHINA C&A Marketing Inc. Model No.:LOWSC510WB 2AD2W-LOWSC510WBI 142 mm BARO SENSOR REFRESH RESET UNIT WI-FI CHANNEL HISTORY MAX/MIN EMBOSS

This article is the property of CCL Electronics Ltd (CCL) and is intended to use as conceptual study, product introduction etc. Any unauthorized usage either in electronic or hardcopy format will be strictly prohibited. CCL reserves all rights to raise legal action to any illegal manipulation of this article.

168 x 142 x 23.5mm VA SIZE: 126mm X 79mm

Unit:mm

Avi Goldenberg e C+A GLOBAL General Counsel Confidential Request Letter Attention:

Application Examiner Re: Request for confidentiality Applicant: C&A Marketing Inc. FCC ID: 2AD2W-LOWSC510WBI To whom it may concern, Permanent Confidentiality Request is hereby submitted by C&A Marketing Inc. to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential:

- Schematics

- Detailed Blocked diagrams

- Detailed Operational/Functional Description Rationale for request for confidentiality:

C&A Marketing Inc. has invested considerate time and materials in research and development to produce the referenced product. Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. The fee for confidentiality has been submitted along with the fee for certification. If you have questions or need further informgfign, please contact the undersigned. Sincerely, Chaim Piekarski Chief Executive Officer C&A Marketing Inc.

Avi Goldenberg oO C+A GLOBAL General Counsel Letter of Agency I, an officer of C&A Marketing Inc. do hereby authorize Intertek Testing Services

(Mr. Terry Chan / Koo Wai Ip / Kenneth Wong) to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under Part 15 and Part 18 of FCC Rules until further notice.

| further certify that no party (as defined in 1.2002(b) of CFR 47,2004) to this application, including meself, is subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.,862. Dated this January day 15" of 2020 1 Lr Sigrfature Chaim Piekarski Printed Name Chief Executive Officer Title