all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 1.94 MiB | June 01 2005 | |||
1 | Block Diagram | June 01 2005 | ||||||
1 | External Photos | June 01 2005 | ||||||
1 | ID Label/Location Info | June 01 2005 | ||||||
1 | Internal Photos | June 01 2005 | ||||||
1 | Cover Letter(s) | June 01 2005 | ||||||
1 | Test Report | June 01 2005 | ||||||
1 | Test Setup Photos | June 01 2005 |
1 | Users Manual | Users Manual | 1.94 MiB | June 01 2005 |
REPORT NO : HCT-F04-1216 FCC ID : SR3WCS-211-R DATE :DECEMBER 30, 2004 ATTACHMENT E.
- USERS MANUAL HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8517 FAX : +82 31 639 8525 www.hct.co.kr Wellbeing call system is not a choice but a necessity for security Housebreaking Connects to all kinds of phone including cellular phones (take proper actions & handling the problem) STABILITY You check all the entrance state of the office and processes from outside. When there is a fire or an emergency case, it is rapidly reported to the administrator ECONOMIC There is not maintenance fee. CONVENIENCE There is remote On/Off function functioned with cellular phones. For emergent cases, children or patients can notify to their family with one button on the cellular phone. FUNCTIONALITY Ultra strong human sensor and temperature sensor is stored internally in the phone device. Newest alarm system notifies housebreaking and fire emergency immediately. Calling ID and Memory system function. Contents Product components Product components ...................................................................................................................4 Product information The front side of Wellbeing call system device ...........................................................................5 The reverse side of Wellbeing call system device.......................................................................6 Telephone set-up Wellbeing call system set-up ......................................................................................................7 Option sensor set-up and usage .................................................................................................8 How to use Wellbeing call system Wellbeing call system input set-up ............................................................................................10 To stop / to return Wellbeing call system ...........................................................................10 System input set-up: mode and finish methods..................................................................10 Telephone number registration...........................................................................................11 Password number registration............................................................................................12 Emergency remote control registration...............................................................................13 Dial voice guidance registration..........................................................................................14 Language usage choice registration...................................................................................14 Wellbeing call system function set-up .......................................................................................15 Alarm set-up and cancellation ............................................................................................15 Alarm set-up procedure ......................................................................................................16 Emergency remote control procedure ................................................................................19 Remote control procedure ..................................................................................................20 Telephone line and power line cutoff alarm procedure.......................................................21 Rechargeable battery procedure, when connected to the power for the first time .............22 Wellbeing call systems telephone usage Telephone function set-up.........................................................................................................23 Trouble-shooting checking Checklist for trouble-shooting....................................................................................................31 Caution for safety use Caution for safety use ...............................................................................................................32 Thank you purchasing Wellbeing call system product. Wellbeing call system has 57 kinds of voice supporting system for users so that users can use the product more conveniently and more correctly. We do our best for our customers convenience. After reading the manual, you may be able to use the product more easily and safely for a long time. Guarantee for the product Phone number for Customer service 3 Product component Product information Please check your product components and if there is any problem, please contact where you purchased the product. WELLBEING CALL SYSTEM WCS-211 There is brief explanation for names and function for each part in the below. Please use different functions. For more detailed explanation of functions, please refer to the appropriate contents. Bitmap Wellbeing Call System device Handset Wireless Emergency Remote Control Telephone line Adapter (12V/500mA) Rechargeable Battery Manual Option sensor (Option)
(Example: magnetic sensor) The front side of Wellbeing Call System Device 1. Hook button: hang-up, dial, and receive telephone. 2. LCD: For clock (time), callers ID, etc. 3. Recording button: short-time function input storage 4. Short-time button: short-time function for calling 5. Voice button: Melody volume and speaker phone volume 6. Alarm selection button: Alarm set-up and cancellation as well as input storage of the Wellbeing call system 7. Human sensor & Fire sensor module: Senses human housebreaking and fire emergency by sensing the fire temperature. 8. Speakerphone button: Call without lifting the handset 9. Redial/pose button: Dial and call the phone number lastly used. Pose function is used for private exchange, office exchange, key phone, etc. 10. Redial button: After the last call, continue to call a different number. 11. Direct call button: After searching or entering phone numbers, call the number without lifting the handset. 12. Handset 13. Search button 14. Search button 15. Delete button: Delete searched numbers and function set-up 16. Dialed numbers verification button: Search dialed numbers 17. Set-up: Function set-up of the telephone 18. Speaker: Call without lifting the handset, bell sound, and voice output of the each function of Wellbeing call
: Search all received numbers and function set-up
: Search all received numbers and function set-up system. 4 5 Product information Telephone set-up The reverse side of Wellbeing call system device Wellbeing call system set-up As we begin to set up the following procedure, please read the contents below and use and set up the product according to the set-up procedure. 1. DC Adapter connector: Power adapter supply jack 2. N.C SW switch: Usage switch of N/C Type SW of the option sensor connection When you don't use the sensor of N/C Type SW with Option Sensor, you must place the switch at
"Delete". 3. Bell sound switch: Switch for controlling the volume sound 4. line connector jack: Jack to connect to the phone line 5. OPTION Sensor: optional beside basic sensor to install additional sensor CAUTION
: Callers ID information may not be transferred when used another communication device beside telephone at home. Also, it may not be possible to check messages and remote control of Wellbeing call system Example) Communication device connection: ADSL, Card Reader, DDD controller, cash machine, sound proof system device..etc. When setting up the internet in a parallel circuit to the phone platform or phone line, if you do not use a noise filter, there can be noise and even if you use the noise filter, there could be a problem in callers ID signal and Wellbeing call system action. (For noise and a trouble, contact the internet service company) CAUTION
: If you use the service in an area where there is no Caller ID service provided, Caller ID sign is not shown. If calls from a payphone or from abroad and if the calling condition is not stable, the number may not be shown. 1. Link a plug of Curl Cord to the handset; link the opposite plug to the jack in the side of the fixed device. 2. Fix the bell volume-controlling switch to the proper position of either "Big" or "Small". In case when there is no additional installation of an optional sensor and N/C Type SW is not used for optional sensor, you must place the switch to the "Delete". If there is an additional installation of an optional sensor to set up N/C Type SW optional sensor, you must place the switch to the "Use". 3. Connect one plug of a Line Cord to the phone jack of the fixed device (phone device). Link the opposite plug to the outlet of the Line Cord. The outlet of the Line Cord installed in general households is modular as standard. If the outlet is 4 terminal type, you should purchase 4 terminal type cord additionally. 4. Connect the power adapter to the AC220V outlet, and then connect the DC jack to the DC12V IN jack on the fixed device. If AC220V outlet is on the wall, let the line of the adapter faces the ground when connected to the power adapter. 5. If you hear the dial tone after connection set-up, the basic set-up has been completed correctly. 6. Rechargeable battery set-up Open the battery cover on the bottom of the fixed device and connect the rechargeable battery pack to the connector, place it in the case and close the battery cover. If you use another rechargeable batteries beside the designated products, it may cause a critical shock to the product and there is a possibility for a dangerous accident, please do not use other products. CAUTION
: 1. Place the rechargeable battery after completing the installation. 2. Separate the battery from the product if not used for a long time. 6 7 Telephone set-up Telephone set-up use and connect to the picture sensor set up in many Magnetic windows. For Normal Close Type sensors additional connection, the additional N/C sensor should be also Normal Close Type. Normal Close Type sensor is Close when both terminal joint points are separated and is Open when the sensor and magnetic are together. Open when the door is closed after setting up and Short when the door is open. For Normal Open Type sensors additional connection, the additional N/C sensor should be also Normal Open Type. Normal Open Type sensor is Open when both terminal joint points are separated and is Close when the sensor and magnetic are together. Close when the door is closed after setting up and Open when the door is open. 4. Decide the connection line according to the sensor joint action type (N/C or N/C) and connect to the SW terminal(N/O SW or N/C SW) of the OPTION SENSOR (terminal block) on the bottom of the fixed device. When using N/C SW of OPTION SENSOR (terminal block) you must place the switch to the Use on the N/C SW on the reverse side of the fixed device. If not using N/C SW of OPTION SENSOR
(terminal block), you must place the switch to the Delete on the N/C SW on the reverse side of the fixed device When setting up Alarm, the voice guiding message is Door open is detected by the option sensor.
: If there is a connection error or wrong switch choice of the N/C SW switch, it detects it as the sensor error so the error action message and sensor detection is not working. CAUTION Option sensor set-up and usage The usage of the option sensor is designed to expand easily to install many sensors beside the basic sensor after purchasing Wellbeing call system. The optional sensor allows the usage of all sensors if it is Normal Open Tyle SW joint or Normal Close Type SW joint. The most used Magnetic Sensor for the option sensor and we define the usage of this sensor in the below. I Example of set-up and Magnetic sensor structure One piece standard for a Sensor Condition Set-up Magnetic Sensor Structur N/O, N/C are changed when MAGNETIC is placed I Magnetic sensor set-up and actions 1. Magnetic sensor installation is mostly designed to protect from external invader by setting up at the door and windows. 2. Wellbeing call system enables two types of sensors that are N/O and N/C , used separately or together. Two types of sensors may be installed in series or in parallel. Attention when setting up : The terminal block joint type (N/O SW, N/C SW) of OPTION SENSOR has the definition in the following.
(Based on the actual action) N/0(Normal Open) :
N/C(Normal Close) :
Connect in series Terminal block Connect in parallel 3. Fix the Magnetic Sensor where the user wants it to be placed. Depending on the users environment, you may Terminal block 8 9 Communication & Telephone Tech. co., Ltd. How to use Wellbeing call system Communication & Telephone Tech. co., Ltd. How to use Wellbeing call system Wellbeing call system input set-up All the input set-up of Wellbeing call system for phone number (change/delete), password number registration (change), emergency remote control registration (change/delete), dial voice guidance set-up). All input set-up should be done in the system input set-up mode. You can enter, change, and delete 9 contact phone numbers. You can enter, change, and delete 4 emergency remote controls You can register and change 1 password number. To stop / to return Wellbeing call system I To stop using Wellbeing call system Order 1 Method Voice Explanation Press the button for more than 10 seconds Alarm Wellbeing call system has been stopped All Wellbeing call systems actions are stopped and only the function of normal telephones is working. I To return to Wellbeing call system Order Method Voice Explanation 1 Or Alarm: Press the button for more than 10 seconds Wellbeing call system has returned to use. Alarm All actions are working normally. Separate rechargeable batteries and separate the power adapter and the reconnect. C&TT Wellbeing call security system. All actions are working normally. System input set-up: mode and finish methods I Input set-up mode of the system Order 1 Alarm Method Voice Explanation Press the button for more than 3 second Please set-up the system input You cannot access when you lift the handset and when the speaker phone is ON. You can set-up all inputs. I Finish input set-up mode of the system Order 1 Or Method Voice Explanation Press the button for more than 3 second System input set-up has been completed. Alarm No input set-up is allowed. If you want to set up inputs, you have to enter the mode again. Press the button Speaker phone System input set-up has been completed. Calling the number Or When there is no button pressed for 10 seconds System input set-up has been completed. Automatically input set-up is completed. Telephone number registration You can register maximum 9 phone numbers and this is only done in the system input set-up mode. I 1st phone number registration Order Method Voice Explanation 1 2 Press the button Select a phone number and enter the number Press the button 1st phone number has been registered. 1st phone number has been registered. It signals whether you can register the 1st phone number. If you press the wrong button, you will hear the voice, "Please try again"
To connect to the office exchange or private exchange, etc, press and button before pressing phone number, and set up the phone number. Please do it again from registration if you enter the wrong number. I 2nd ~ 9th phone number registration Same as the 1st phone number registration, and just press the sequential number for the appropriate numbers. Ex) 1. For the 2nd phone number:
Ex) 2. For the 4th phone number:
I 1st~9th phone number change Same as the phone number registration. The initial phone number will be deleted automatically when the new phone number is registered. 10 Wellbeing Call System 11 Wellbeing Call System Communication & Telephone Tech. co., Ltd. How to use Wellbeing call system Communication & Telephone Tech. co., Ltd. How to use Wellbeing call system I Delete the 1st phone number Order 1 2 Method Voice Explanation Please enter the 1st phone number 1st phone number has been deleted It signals whether you can register the 1st phone number. If you press the wrong button, you will hear the voice, "Please try again"
Please delete unused phone numbers. It may unnecessarily connect to the phone in the alarm message. Press the button Press the button I Delete the 2nd~9th phone number Same as the 1st phone number registration, and just press the sequential number for the appropriate numbers.
* To connect to the office exchange or private exchange, etc, press button before pressing Redial/pose phone number, and set up the phone number. Ex) Redial/pose
: When connecting to the PBX(Private Branch Exchange), PABX (Private Automatic Branch eXchange), CAUTION Key phone, etc, you must use buttons to enter phone numbers when setting up phone number registration. Password number registration I Password number registration The password number is set up as "1111" when first came out of the factory. Order Method Voice Explanation 1 2 Press the button Enter the 4 digit password number Press the button Register the password number Password number has been registered It signals whether you can register the 4 digit password number. If you press the wrong button, you will hear the voice, "Please try again"
Password number for remote control/alarm set-up and cancellation to control the motions of Wellbeing call system. It may be changed. I Password number change Same as the password number registration. The initial password number will be deleted automatically when the new number is registered.
* Password number is not deleted permanently. After connecting to the remote control, you may change the password number and do it as the password number registration. Emergency remote controller registratio I 1st emergency remote controller registration You can register maximum 4 emergency remote controllers. Order 1 Method Voice Explanation Press the button 2 Press the emergency remote controller's button for more than 1 second Press the emergency remote controller button. Register the 1st emergency remote controller It signals whether you can register emergency remote controller. If you press the wrong button, you will hear the voice, "Please try again"
emergency remote controller has been registered You can change and delete new remote controller. Each remote controller has its own ID Code so there is no lines crossed. I 2nd~4th emergency remote control registration Same as the 1st phone number registration, and just press the sequential number for the appropriate numbers. Ex) 1. For the 2nd phone number:
Ex) 2. For the 4th phone number:
I Change 1st~4th emergency remote control registration Same as the emergency remote controller registration. The initial emergency remote controller will be deleted automatically when the new emergency remote controller is registered. I Delete the 1st emergency remote control Order Method Voice Explanation 1 2 Press the button Register emergency remote controller It signals whether you can register emergency remote controller. If you press the wrong button, you will hear the voice, "Please try again"
Emergency remote Press the button 12 Wellbeing Call System 13 Wellbeing Call System Communication & Telephone Tech. co., Ltd. How to use Wellbeing call system Communication & Telephone Tech. co., Ltd. Wellbeing call system function set-up Dial voice guidance set-up I Dial voice guidance set-up Order Method Voice Explanation 1 2 Dial voice guidance set-up. #1 for set-up and #2 for cancellation. Dial voice guidance has been set up. Press the button Press the button After putting down the handset, if you dial the button, the voice signals the dialed number. I Cancel dial voice guidance set-up Order Method Voice Explanation 1 2 Dial voice guidance set-up. #1 for set-up and #2 for cancellation. Dial voice guidance has been cancelled. Press the button Press the button No voice when dial button is pressed. Language usage choice registration I Language selection The users language is set to be English when first came out of the factory, and the basic content is written in English. Order Action English Chinese Spanish Method Voice Explanation Press the button Press the Press the Press the Select the language.
#1 for English, #2 for Chinese, #3 for Spanish. You can choose among English/Chinese/Spanish depending on your language preference. English is selected All the messages for voice are in English Chinese is selected All the messages for voice are in Chinese Spanish is selected All the messages for voice are in Spanish Wellbeing call system is a safety system for crime/fire/security/life prevention and senses housebreaking and fire emergency as well as fire outbreak, immediately notifying entered telephone number. It also reports emergency calls of patients and emergency calls of old people. It can also report emergency calls when burglar or a thief breaks in by immediately reporting all the conditions from monitoring. Wellbeing call system may be controlled from outside, and it enables internal monitoring as well. Alarm set-up and cancellation I Alarm set-up (Alarm condition) Order 1 Method Voice Explanation Press the button briefly. Alarm Alarm has been set up. You cannot set up when you lift the handset and when the speakerphone is ON. The functions of telephone do not work when the alarm is set up. I Cancel the Alarm set-up (Within 70 seconds after alarm set-up) Order 1 Method Press the button briefly. Alarm Voice Alarm has been cancelled. Explanation I Cancel the Alarm set-up (After 70 seconds after alarm set-up: Normal state or all actions are in process after alarm set-up) Order 1 Method Password Press the button Voice Alarm has been cancelled. Explanation password If you press the button, alarm is immediately cancelled after 70 seconds after the alarm set-up and when any action of alarm. 14 Wellbeing Call System 15 Wellbeing Call System Alarm set-up procedure I Activities before and after alarm set-up Waiting time: It is the minimum required for the user to escape movement activities after setting up the alarm. During this time, the self-system checking function is working and it notifies and checks each sensors condition and the condition of rechargeable batteries, etc. I Report when automatically connecting to the phone from the sensor The sensor is detected at the alarm set-up mode and then it automatically connects to the registered telephone number. Wellbeing call system function set-up Contents Alarm set-up Waiting time (70 seconds) After 70 seconds Contents Sensor movement Connect to the phone Alarm Press once n o i t a n a p x E l Dial Back Light LED turns ON. LCD Back Light Lamp turns ON. Self-diagnosis for each sensor. If there is a problem in a sensor, the following voice message appears 5 times signaling the problem.
- door open sensor (OPTION SENSOR): There is a problem in the door open sensor.
- Housebreaking sensor: There is a problem in the housebreaking sensor. Fire sensor: There is a problem in the fire sensor. If the sensor is not restored and continues to have a problem, it ignore the sensor activities and if it is restored, it automatically returns to normal. If there is a problem in rechargeable batteries, voice messages sound 3 times saying Replace a new battery. Please replace a new battery accordingly.
- Purchase rechargeable batteries from the product seller Dial Back Light LED turns OFF. LCD Back Light Lamp turns OFF. After sensing each sensors activity, calls the registered phone number and reports the following voice messages.
- door open sensor (OPTION SENSOR):
Door has been open.
- Housebreaking sensor:
Housebreaking has been detected.
- Fire sensor: Danger of fire is detected. Fire breakout is detected. This is an emergency. If the sensor continues its activity instead of returning to the system,
- Normal activities until the 2nd time
- After then, it ignores sensing movement before returning to normal
(ignores from the 3rd)
- Sensor returns to normal activities automatically for normal state. Sensor detection
- Human detecting sensor
- Fire detecting sensor
- OPTION SENSOR
(door open sensor) Emergency remote control movement n o i t a n a p x E l Connect to the registered telephone number. (max. 9)
- If no one answers the phone, it connects to the next telephone number after 40 seconds, and it automatically finishes after repeating this for 3 times.
- If the line is busy, it hangs up the phone and automatically connects to the next phone.
- If any one receives the phone and the voice comes out from the handset, it stops to connect to the phone. Motions while connecting to the phone After calling the registered number, Sending Wellbeing call voice message Press *. The voice message appears every 4 seconds. Press * after the voice message.
- If you hear the same voice message, press *.
- Press * after the voice message in case it does not recognize * if you press the button while the voice message is on. It senses that the phone is connected when * is pressed after the voice message. If there is no *
pressed, it automatically connects to the next phone after 40 seconds. Activities after connecting to the phone When * is pressed, the voice message about sensor activities immediately.
- Open door sensor
(OPTION SENSOR) has been detected.
- Housebreaking sensor:
Housebreaking has been detected.
- Fire sensor: Danger of fire is detected. Fire breakout is detected.
-This is an emergency.
- Emergency remote control:
Please help me. This is an emergency. Hang up the phone automatically after 60 seconds of both speakerphones being one line. To stay on line, press *
before 60 seconds. Additionally stays on line for 60 seconds If you want to hang up before 60 secs, press #
button or hang up the phone. 16 17 I Sensor Contents Human detection sensor Fire sensor OPTION SENSOR Senses the temperature change of the infrared rays and an object movement with infrared rays movement range is (right and left) max. 220 degree and max. 11 meter After setting-up, turn and fix the sensor lenses towards the exit do not place it close to the thermo objects, hot objects. It may cause a trouble apply NTC Thermo- objects and detects fire breakout by applying analysis with algorism Detects rapid temperature change in case of fire breakout, reports a warning message by detecting the fire breakout temperature human detection sensor may work together with the fire sensor in case of fire breakout and it may report housebreaking message as well. Wellbeing call system allows additional set-up of optional sensor beside basic detection sensor. Applicable message for activities Door has been detected to be open For additional option installation, you can install N/O Type SW, N/C Type SW, etc. Most often used optional device for door open sensor is Magnetic sensor. It can temporarily connect in series or in parallel. n o i t a n a p x E l Emergency remote control I Emergency remote control You can use maximum 4 emergency remote controls and each remote control has its own ID CODE preventing crossed lines or error in system. Also, wireless RF Type is not limited in directions. Emergency remote control 8activities emergency remote control works while alarm is on or alarm is off stop Wellbeing call system does not work its activities come first than other activities Contents n o i t a n a p x E l Phone connection Connect to the registered telephone number. (max. 9)
- If no one answers the phone, it connects to the next telephone number after 40 seconds, and it automatically finishes after repeating this for 3 times.
- If the line is busy, it hangs up the phone and automatically connects to the next phone.
- If any one receives the phone and the voice comes out from the handset, it stops to connect to the phone. press the button of emergency remote control Actions after connecting to the phone When * is pressed, the voice message about emergency remote control activities immediately.
- Please help me. This is an emergency. Hang up the phone automatically after 60 seconds of both speakerphones being one line. To stay on line, press *
before 60 seconds. Additionally stays on line for 60 seconds If you want to hang up before 60 secs, press
# button or hang up the phone. Actions while connecting to the phone After calling the registered number, Sending Wellbeing call voice message Press *. The voice message appears every 4 seconds. Press * after the voice message.
- If you hear the same voice message, press *.
- Press * after the voice message in case it does not recognize * if you press the button while the voice message is on. It senses that the phone is connected when * is pressed after the voice message. If there is no *
pressed, it automatically connects to the next phone after 40 seconds. 18 19 Communication & Telephone Tech. co., Ltd. Remote Control Remote Control: Connects to the phone with the Wellbeing call system from outside and remotely controls alarm on/off, Change the password number, and Monitoring environment inside I Remote control from outside Call from outside and connect to the remote control and then same procedure as alarm on/off and password change, etc. Order Method 1 With Wellbeing call system, call from outside. After a bell rings for 12 times
(36 secs), it automatically connects to the remote control mode. 2-1 Password Press the button 2-2 No button pressed Voice message Connecting to the System remote control Press the password number and #
Connected to the System remote control Set up the remote Connecting to the System remote control Press the password Password error. Press the password number and # again. Explanation Connect to the Well-being call system by calling in order to control remotely from outside. Two ways call is enabled through speakerphone by completing connection to the Well-being call system. Choose between alarm on and off and you can change the password number. Automatically it turns off when there is no button pressed until the voice sounds three times every 10 seconds. No remote control connected if wrong password button is pressed It automatically turns off if the wrong password number is entered for three times. 2-3 3 4 5 6 Wrong password Press the button Alarm is now on 7 Press the button Alarm is now off Press the button Register the password Repeat the same process as the normal alarm set-up. Repeat the same process as the normal alarm set-up. Repeat the same process as the normal password number set-up For password number change Press 4 digit password number Press the button 7 Calling time after remote control connection Password is registered No button pressed after connecting to the remote control, it automatically disconnects the phone after 60 seconds of calling. To extend the calling time, press button. Phone line & power line cut off alarm I Phone line cut-off alarm Contents Phone line cut-off Alarm siren ON Alarm siren OFF Phone line cut-off is working only in the Alarm set-up mode When the phone is disconnected, and is restored again siren rings for 120 seconds and the turns off automatically. If you want to turn off the siren manually, press password button button. password When the phone is cut off at the Alarm set-up mode, siren rings for 120 seconds from the fixed device speaker of the Wellbeing call system. When the phone is disconnected, all other activities of alarm mode beside the alarming siren, go back to the initial stage. When this state continues, the siren sounds for another 120 seconds and then it does not sound any longer. It repeats the process again when the cut0off stage restores and then phone line is cut off again. n o i t l a n a p x E I Phone line cut-off alarm explanation Contents Phone line cut-off Alarm siren ON Alarm siren OFF n o i t l a n a p x E Phone line cut-off is working only in the Alarm set-up mode When the phone is disconnected, and is restored again siren rings for 120 seconds and the turns off automatically. If you want to turn off the siren manually, press password password button button. When the phone is cut off at the Alarm set-up mode, siren rings for 120 seconds from the fixed device speaker of the Wellbeing call system. If the power supply is cut off while connecting to the phone by the sensor action at the alarm set-up mode, the alarm siren sounds after completing calling the phone. When this state continues, the siren sounds for another 120 seconds and then it does not sound any longer. It repeats the process again when the cut-off stage restores and then phone line is cut off again. 20 Wellbeing Call System 21 Communication & Telephone Tech. co., Ltd. Communication & Telephone Tech. co., Ltd. Wellbeing call systems telephone usage Rechargeable battery procedure, when connected to the power for the first time Telephone function set-up I Initial power connection Order 1 Method Voice Explanation Connect the power adapter to the unit. DC 12V IN SW N/C C&TT Wellbeing call system. All activities stay at the initial stage Separate the power, reconnect, and try again when there is a problem. Choose: time and date, redial time, area code, digital/analog dial, alarm, time to stop using the alarm, melody bell sound, ring/melody/voice information, analog clock for hours on/off Shortened memory, receiving calls, callers ID, sending call numbers search, direct calls, flash, redial/pose, and volume control Beside the Wellbeing call systems alarm function, it can be used as a phone Caller ID does not work when used in a area where the service is not provided, and when connection is bad, or it may not work for payphone calls and international calls. I Rechargeable battery Order 1 Method Voice Explanation To set up rechargeable battery, open the cover below the main phone, connect to the designated rechargeable battery pack. When recharging does not work from a trouble, an alarm voice of
"Change the rechargeable battery"
sounds for three times. Rechargeable battery is used as a back-up for black out or when power supply is cut off from being fully charged all the time. Time and Date Set-up I "Year", "Month", "Date", "Time" Set-up Order Method LCD display Explanation 1 2 3 4 Press the button Press the button Press the Dial button for year/month/date/time Main screen of SET-UP 2003 flashes manage the year, month, day, time with the dial button
(two digit for year) After year is entered, it automatically goes to month, date, and time Press the button year, month, date, and time are set up I FLASH time set-up Order Method Press the button Press the button Press the button 1 2 3 4 Explanation Main screen of SET-UP Each button pressed for , the left LCD display shows each flash time being circulated Flash time-"FLASH 600" as a standard Press the button Time on FLASH has been set up 22 Wellbeing Call System 23 Wellbeing Call System Communication & Telephone Tech. co., Ltd. Wellbeing call systems telephone usage Communication & Telephone Tech. co., Ltd. Wellbeing call systems telephone usage I Area code CODE 2 is not used for the main telephone. Order Method LCD display Explanation 1 2 3 4 5 SET-UP Press the button Press the button Press the button Press the area code Press the button DELETE Main screen of SET-UP
'CODE 1' for area code set-up
'CODE 2' is set up but not used Area code for the area where phone is used press the area code with the dial button start with the first number of the digits area code is complete I Electronic/Mechanical Dial selection Choose between digital (TONE) and analog (PULSE) for dialing when you make a phone call. Order Method LCD display Explanation 1 2 3 4 5 SET-UP Press the button Press the button Main screen of SET-UP
'CODE 1' is for dial set-up
'CODE 2' is for wiretap prevention set-up Press the button tONE the basic set-up is TONE and choose with the Press the button SEARCH tONE PULSE tONE button is to show TONE and PURSE on the LCD display basic set-up should be on TONE Press the button DELETE Dial set up is complete I Wiretap prevention set-up 9 If there is a wiretap on the same line, it automatically sends a signal of beeping (Doo~Doo~Doo~) that there is a wiretap phone connected. Order Method LCD display Explanation 1 2 3 4 5 SET-UP Press the button Press the button Press the button OFF SPI Main screen of SET-UP CODE 1 is for dial set-up CODE 2 is for wiretap prevention set-up The basic set-up should be on OFF. If not necessary, do not use it Press the area code SEARCH OFF SPI ON SPI OFF SPI When pressing button, the left LCD displays ON and OFF. The basic set-up should be on OFF. Press the button DELETE Wiretap prevention set-up is complete I Alarm set-up Order Method LCD display Explanation 1 2 3 4 5 5 SET-UP Press the button Press the button Press the button Press the button Press the dial button for the Appropriate Alarm Time Press the button DELETE CAUTION
: 1. set the alarm on OFF normally. 2. for the set-up, alarm is set up and is on. Main screen of SET-UP 3 alarm times can be set up The basic set up is on OFF alarm set up, alarm, alarm button can switch between set-up and OFF Example of First alarm time on 18:00 Alarm set-up is complete 24 Wellbeing Call System 25 Wellbeing Call System Communication & Telephone Tech. co., Ltd. Wellbeing call systems telephone usage Communication & Telephone Tech. co., Ltd. Wellbeing call systems telephone usage I Alarm sound stoppage set-up This function decides the specific time in which alarm is off. Order Method LCD display Explanation 1 2 3 4 5 6 SET-UP Press the button Press the button Press the button Press the button Dial button for the desired stoppage time Press the button DELETE Main screen of the Set-up 2 kinds of time setting The basic set-up is OFF The 1st time setting is , the 2nd time setting is . button switches between set-
up and OFF The example of the 1st stoppage time from 24:00 to 06:00 Alarm sound stoppage set-up is complete CAUTION
: 1. Normally, set the stoppage time on OFF 2. During the set-up, alarm does not work from 24:00 till 06:00 I Melody Bell sound set-up You can choose your preferable melody bells when setting up the bell sound Order Method LCD display Explanation 1 2 3 5 SET-UP Press the button Press the button Press the button Chosen melody sounds SEARCH Chosen melody sounds Main screen of the Set-up There are 10 kinds of melody. It works when set up as melody bell When pressing the button, the left LCD displays Song 1~Song 10 and the chosen melody sounds. Choose the melody you want Press the button DELETE Melody Bell sound set-up is complete I Choose regular bell and melody bell after voice guide When the phone rings, choose one of 4 in the following: Ring, Melody bell, Ring after the voice message about Callers ID phone number, and Melody bell after the voice message about Callers ID phone number. Order Method LCD display Explanation 1 2 3-1 3-2 3-3 3-3 4 Press the button Press the button Press the button Press the button Press the button Press the button Press the button I Analog clock alarm on and off set-up Analog clock on time Order Method 1 2 Press the button for 3 seconds Press the button for 3 seconds Main screen of the Set-up When it first came out, it was set up as Ring Choose among 4 different bell types Ring Melody bell Melody bell after the voice message
(English) about Caller's ID phone number Ring after the voice message (English) about Callers ID phone number Bell choice is complete. Explanation On time clock alarm is on Tone sound is on for every on time hours number count On time clock alarm is off no on time clock alarm I When first came out, it was set [ON CLOCK] and every 3seconds button is pressed, ON CLOCK and OFF CLOCK switches CAUTION
: 1. N_NIH 5 set-up (choose " " button and press button) is not used. Do not use this set-up. 2. NO CODE set-up (choose " " button and press ) is not used. ng SET-UP Do not use this set-up. g SET-UP 26 Wellbeing Call System 27 Wellbeing Call System Communication & Telephone Tech. co., Ltd. Wellbeing call systems telephone usage Communication & Telephone Tech. co., Ltd. Wellbeing call systems telephone usage I Receiving calls search (Callers ID display for telephone no. search) Must register Callers ID (CID) service and if the currently installed PABX (private exchange) and key phone system do not provide service for CID, it cannot display it. Order 1 Method Press the button SEARCH LCD display Explanation The firstly sending phone number's complete number is shown, then the phone number, date, and the time are shown. One by one, the information is displayed each time button is pressed. I Receiving calls search (Callers ID display for telephone no. search) number deletion Order Method LCD display Explanation 1 2 3 SEARCH DELETE DELETE Press the button Search the number to delete and choose the number. One by one, the information is displayed each time button is pressed. Press the button del one -----
To delete the chosen one phone number and this only deletes one phone number. Press the button for more than 3 seconds del ALL -----
All phone numbers called are deleted. I Shortened function for phone number memory (direct number-10 memories) Order Method LCD display Explanation 1 2 3 4 Press the button SAVE DIAL BUTTON Press the dial button for the phone number Press the button SAVE
DIAL BUTTON Choose one no. among 10 numbers for direct function with the dial button Shortened function memory screen Phone numbers for this shortened function When using the internal phone, press button and button. 9 redial/pose Registration completes as entered numbers are passing by. I Direct dial function usage Order 1 2 3 Method Press the button 9 Direct 0 DIAL BUTTON Press the DIAL button for the shortened number. Press the button Redial LCD display ACCESS 0222028538 Explanation Main screen of Direct dial Entered phone no. appears according to its direct number 00-00 Calls directly and sending call screen is shown. I Shortened dial function usage: memory deletion Order 1 2 3 Method Press the button Direct LCD display DIAL BUTTON Press the DIAL button for the shortened number. Press the button DELETE Explanation Main screen of Direct dial Entered phone no. appears according to its direct number To delete the chosen one phone number and this only deletes one phone number. I Receiving calls search (Callers ID): direct phone call function Order Method LCD display Explanation 1 2 Press the button SEARCH Press the button REDIAL I Sending calls search Order Method 1 2 Press the button Check sending calls Press the button SEARCH Received number appears on the screen Search the number to call and choose Calls directly and "sending call screen" is shown. LCD display Explanation The last call from receiving calls is shown. You can check 30 sending calls starting from the recently called number After the phone number is displayed on the LCD screen, you may use Redial function. Received number appears on the screen 28 Wellbeing Call System 29 Wellbeing Call System Communication & Telephone Tech. co., Ltd. HOW TO USE WELLBEING CALL SYSTEM TELEPHONE Trouble-shooting checking I FLASH function Use to make a phone call again. It is convenience to use when connecting to the key phone or PABX
(private exchange) thus to replace different internal users. Symptom No signal on the LCD Checklist for trouble-shooting Is the power adapter connected correctly?
LCD display Explanation No movement such as alarm set up and no voice message Is the power adapter connected correctly?
Order 1 FLASH Method Press the button When wrong dial button is pressed or the line is busy, press button to call again. FLSH I REDIAL/POSE function Press " " and button when using line from the key phone or PABX (private exchange) and set up the input and record the telephone number. Redial/pose Order Method LCD display Explanation 1 1 REDIAL/POSE Press the button
(Redial) REDIAL/POSE Press the button
(Pose) When line is busy, put down and lift the handset or press button and button for automatic dialing. REDIAL/POSE FLSH Pose function is entered without lifting the handset and used to registered a phone number for Wellbeing call system and phone number memo. used for line connection I SPEAKER VOLUME CONTROL The users can volume when calling the phone Order 1 Method LCD display Explanation Press the button once VOLUME The volume goes from level 1 to level 4 when pressing button for once. VOLUME I REGULAR BELL VOLUME CONTROL Order 1 Method LCD display Explanation Choose the switch
*Choose between Loud and Small for the bell switch. Cannot set up the Wellbeing call system Cannot set up and cancel the alarm Voice message There is a problem in a sensor when setting up alarm. Cannot use telephone functions
(even when you press the dial button) Siren rings when alarm is set up Refer to the Wellbeing call system input set up and Function set-up methods and try it again. Is your handset put down correctly?
Is your speakerphone on?
Is the Wellbeing call system put on Stop?
Did you use the correct password number when canceling the alarm set-up?
Check whether there is a problem in the external part of the sensor. Check whether the option sensor is connected normally if there is an error voice message about the door open sensor. Also, check whether N/C SW is placed correctly at the back side of the phone. Is it set up as alarm?
Are the power adapter and phone line connected?
Are the power adapter and phone line connected?
Voice message "Replace your battery"
when setting up the alarmalarm Did you use the assigned rechargeable battery package?
Please change the battery. No report when sensor works fine for alarm set up Did you registered the phone number?
Try again after referring to the telephone number registration and function set-up methods. Did you enter the button 9 and button POSE for the telephone registration while using private exchange and key phone?
Cannot connect even when I press the button after receiving the alarm set-up report Remote control connection not working No Callers ID shown Did you press button during the information message?
Is this the correct password number?
Do you use another communication device at the same line with the Wellbeing call system? If yes, add noise filter, etc. It may still cause a trouble for the callers ID and Wellbeing call system. Hear the sound "Bee" from the speaker when calling from the speakerphone Turn the speaker volume down with "Volume" button in case there is a structural problem with a microphone. 30 Wellbeing Call System 31 CAUTIONS FOR SAFETY USE OF THE PRODUCT CAUTIONS FOR SAFETY USE OF THE PRODUCT This is to prevent any unexpected danger or loss before using the product by reading safety-related cautions. WARNING The user may die or be injured severely if he/she does not keep the warning points mentioned. CAUTION The user may be injured severely or his/her product may be damaged if he/she does not keep the warning points mentioned. WARNING About the power Do not let the product wet in water. If water enters the product internally, take out a power plug, phone line, and rechargeable battery package, and contact sales sector or customer service. It may cause fire or electric shock. Do not give a shock to the product and keep away from vibration. Do not set up the product close to fire, corrosive gas, dust, wetness, etc. It may cause fire or electric shock. CAUTION In use Do not use and connect multiple consent to the power outlet. Also, do not use loose consent and always tightly insert it. It may cause fire or electric shock. Please use The C&TT applicable adapter that is included in the product package. This product is for current 220V. Check the voltage. It may cause fire or electric shock. In use Do not drop or throw the phone. If there is a problem from dropping the phone, take out a power plug, phone line, and rechargeable battery package, and contact sales sector or customer service. It may cause accident, injury, or damage. Do not spin more than once when changing the direction of the human detection sensor. If it is revolved more than once, you must spin it in the opposite direction. Do not clean the lenses of the human detection sensor with alcohol or chemicals and do not press too hard. It may break the product. Do not dismantle the product. Consult the sales sector or customer service for checkup and repair. It may cause fire or electric shock. If there is a smoke or smell, discontinue using the product. Separate a power plug, phone line, and rechargeable battery package and contact sales sector or customer service. It may cause fire or electric shock when continue to use the broken product. 32 Separate the battery package when not using for a long time or to preserve. It may cause accident or damage. Use the assigned adapter and assigned power voltage, do not use or set up beside the assigned use. Also, do not use another rechargeable batteries or regular batteries beside the assigned rechargeable battery package. It may cause fire, electric shock or severe damage. 33 List of Phone Numbers Memo List of Phone Numbers List of Phone Numbers Name Phone number Etc. Name Phone number Etc. 34 35
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2005-01-06 | 311.061 ~ 311.061 | CYY - Communications Receiver used w/Pt 15 Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2005-01-06
|
||||
1 | Applicant's complete, legal business name |
C&TT Co., Ltd.
|
||||
1 | FCC Registration Number (FRN) |
0012268108
|
||||
1 | Physical Address |
#1003 Geumbok Bidg, 45-2 Bang-I Dong, Song-Pa Gu
|
||||
1 |
Seoul, N/A
|
|||||
1 |
South Korea
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
M******@CCSEMC.COM
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
SR3
|
||||
1 | Equipment Product Code |
WCS-211-R
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
H******** K********
|
||||
1 | Title |
R&D Direct
|
||||
1 | Telephone Number |
82-2-********
|
||||
1 | Fax Number |
82-2-********
|
||||
1 |
h******@chol.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | CYY - Communications Receiver used w/Pt 15 Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wellbeing Call System (Receiver) | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | Yes | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
HCT Co., LTD
|
||||
1 | Name |
S******** L********
|
||||
1 | Telephone Number |
82-31********
|
||||
1 | Fax Number |
82-31********
|
||||
1 |
s******@HCT.co.kr
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B | 68 | 311.06100000 | 311.06100000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC