5-Way Wireless Charger August 6, 2019 Revision V1.3 2018 CalAmp All rights reserved. 15635 Alton Pkwy #250, Irvine, CA 92618 (888)-823-7237 1 Copyright 2018 CalAmp. All rights reserved. Complying with all applicable copyright laws is the responsibility of the user. Without limiting the rights under copyright, no part of this document may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording or otherwise), or for any purpose, without the express written permission of CalAmp. CalAmp and the CalAmp logo are registered trademarks of CalAmp in the United States and certain other countries. 115635 Alton Pkwy #250, Irvine, CA 92618 Phone: (888) 823-7237 Fax: (214) 612-7777 www.calamp.com www.scioncommand.com 2018 CalAmp All rights reserved. 15635 Alton Pkwy #250, Irvine, CA 92618 (888)-823-7237 2 Table of Contents Revision History ............................................................................................................................................ 3 Package Contents ......................................................................................................................................... 4 Installation .................................................................................................................................................... 5 Usage ............................................................................................................................................................ 5 Specification ................................................................................................................................................. 6 Statement..7 Revision History Revision V 1.1 V 1.2 V 1.3 Reason Initial Document Layout Improvements Added Part #
Date 8/1/2019 8/6/2019 2018 CalAmp All rights reserved. 15635 Alton Pkwy #250, Irvine, CA 92618 (888)-823-7237 3 Package Contents 5 Way Wireless Charger Charging Cable with International adapters 2018 CalAmp All rights reserved. 15635 Alton Pkwy #250, Irvine, CA 92618 (888)-823-7237 4 Installation 1. Connect charging cable to 5 Charger 2. Connect power adapter to a power source Usage To charge a device, simply place the device into an empty charging slot. The charging status of the device will be indicated using the front panel LEDs as follows:
Charging Fully Charged Not Charging Solid blue LED Flashing blue LED No LED Note: Charging longer than 8 hours will put charger in standby mode 2018 CalAmp All rights reserved. 15635 Alton Pkwy #250, Irvine, CA 92618 (888)-823-7237 5 Specification Input Supply Voltage: 12Vdc +/- 5% regulated Input Supply Current: 3A maximum Total Charging Power: 36W Power supply required: 12Vdc 3.0A 2.5mm DC Plug Charging standard: 5W maximum Per Section: (5 off) Charging current: max 1000mA (4.2V battery charge) Charging power: 5W Conversion: 75%
N.W.: 1.04 kg Size: 300mm(L) x 114.3mm(W) x 101.6mm(T) Country of Manufacturing: United Kingdom Part Number: CH1A55VOCP-5 Charging distance: 5mm (3mm gap between SC1004 and Charging station face maximum) 2018 CalAmp All rights reserved. 15635 Alton Pkwy #250, Irvine, CA 92618 (888)-823-7237 6 Statement FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/ TV technician for help. CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 10 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. 2018 CalAmp All rights reserved. 15635 Alton Pkwy #250, Irvine, CA 92618 (888)-823-7237 7 Canada, Industry Canada (IC) Notices This device complies with Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Canada, avis d'Industry Canada (IC) Cet appareil est conforme avec Industrie Canada exemptes de licence RSS standard(s). Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interfrence et (2) cet appareil doit accepter toute interfrence, notamment les interfrences qui peuvent affecter son fonctionnement. Radio Frequency (RF) Exposure Information The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized. This device has also been evaluated and shown compliant with the IC RF Exposure limits under mobile exposure conditions. (antennas are greater than 10cm from a person's body). Informations concernant l'exposition aux frquences radio (RF) La puissance de sortie mise par lappareil de sans fil est infrieure la limite d'exposition aux frquences radio d'Industry Canada (IC). Utilisez lappareil de sans fil de faon minimiser les contacts humains lors du fonctionnement normal. Ce priphrique a galement t valu et dmontr conforme aux limites d'exposition aux RF d'IC dans des conditions d'exposition des appareils mobiles (antennes sont suprieures 10 cm partir du corps d'une personne). 2018 CalAmp All rights reserved. 15635 Alton Pkwy #250, Irvine, CA 92618 (888)-823-7237 8 Operation Frequency : 120KHz ~200KHz Maximum radio-frequency power : 34.2dBuA/m EU DECLARATION OF CONFORMITY We, CalAmp, declare under our sole responsibility that the product, CalAmp SC Ion Track 5-way charger, is in conformance to the essential requirements and other relevant provisions of European standard directive 2014/53/EU. 2018 CalAmp All rights reserved. 15635 Alton Pkwy #250, Irvine, CA 92618 (888)-823-7237 9