FCC ID: APV-TAG09 iOn Tag

STAG09XT Operation manual Calamps STAG09XT have been developed to work alongside the tracking and monitoring devices. They can report presence / absence as well as the data for alert notifications

(temperature & proximity). The logging checks and stores temperatures every 60 seconds to local memory. When in the range of a compatible device, the logged data is communicated to our server for storage, visualization and analysis. Installation of the STAG09XT is via a 3M adhesive backing which provides a strong attachment to plastic and metal assets. Each STAG09XT has a unique identifier that is presented as a number and a barcode on its label. Association is completed by scanning this barcode and entering details regarding the asset. The STAG09XT can also be coupled with Type T Thermocouple to obtain additional temperature readings ranging between -270c to 400c. The STAG09XT communicates via a proprietary protocol over 2.4GHz, with a Tx power of 0dBm. The range is 20m indoors, and 80m outdoors (LOS). The STAG reporting interval is every 5 seconds, and the logging frequency is 15 minutes, which provides a 30 day logging buffer. The temperature accuracy is sub 1 degree C (NIST traceable). Regulatory Information Human Exposure Compliance Statement Pursuant to 47 CFR 15.247 (i) of the FCC Rules and Regulations, personal communications services (PCS) equipment is subject to the radio frequency radiation exposure requirements specified in 1.1307(b), 2.1091 and 2.1093, as appropriate. CalAmp Wireless Networks Inc. certifies that it has determined that the STAG09XT complies with the RF hazard requirements applicable to broadband PCS equipment operating under the authority of 47 CFR Part 15, Subpart C of the FCC Rules and Regulations. This determination is dependent upon installation, operation and use of the equipment in accordance with all instructions provided. FCC Rules and Industry Canada (IC) regulatory information Compliance Statement (Part 15.19) The equipment device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received including interference that may cause undesired operation. Warning (Part 15.21) Changes or modifications not expressly approved by Calamp Wireless Networks could void the users authority to operate the equipment. Manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Compliance Statement (Part 15.105(b)) Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Class B digital device notice CAN ICES-3 (B)/NMB-3(B) RF Radiation Exposure Statement This equipment complies with the FCC/IC radiation exposure limits set fourth for mobile transmitting devices operation in an uncontrolled environment. End users must follow the specific operating instructions to satisfy RF exposure compliance. This transmitter must not be co-located or operation in conjunction with any other antenna or transmitter. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment.

LABEL 1:

IDs are sequential All corners rounded (1mm radius) iOn Tag TM Powered by CalAmp Supply Chain Integrity iOn TrakTM ID: 72057594037927936 15635 Alton Pkwy #250, Irvine, CA 92618 www.calamp.com Powered by CalAmp Supply Chain Integrity P/N: STAG09XT FCC ID: APV-TAG09 IC: 5843C-TAG09 F/W: 2.2.0 6 3 9 7 2 9 7 3 0 4 9 5 7 5 0 2 7

D I device label on pcb Size of main label: 57x19mm (1mm corner radius) Size of second label: 6x19mm (1mm corner radius) Cuts are shown with red dashed line. PLEASE NOTE:

Artwork is not finalised and is subject to change. The device ID and 128 barcode will be unique (sequential) for each label.

Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21048 Date: May 27 2021 SUBJECT: FCC Application for (FCC ID: APV-TAG09) To Whom It May Concern:

We, the undersigned, hereby authorize David Zhang in Vista Laboratories, Inc on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Vista Laboratories, Inc. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Full Name:

Position / Title: Certification Manager Place of Issue:

Imad Rizk 2200 Faraday Ave, suite 220 Carlsbad, Ca 92008. USA May 27 2021 Date:

Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21048 Confidentiality Request regarding application for certification of FCC ID: APV-TAG09 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagrams External Photos Internal Photos Operation Description Parts List/BOM Schematics Test Setup Photos User manual Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent*

Permanent Permanent Permanent Permanent*

*Requires further justification before permanent confidentiality will be allowed. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, we also request temporary confidential treatment of information accompanying this application as outlined below for an initial period of 180 days. Full Name:

Position / Title: Certification Manager Place of Issue:

Imad Rizk 2200 Faraday Ave, suite 220 Carlsbad, Ca 92008. USA May 27 2021 Date: