FCC ID: 2AFGD000610 DriveWell Tag

DriveWell Tag

The DriveWell Tag is a Bluetooth Low Energy (BLE) device with an

embedded accelerometer and clock that is used to measure vehicle

dynamics.

Designed to augment smartphone sensors as part of a telematics

program, the Tag continuously captures and records all drives for a

given vehicle, even when the smartphone is absent.

The Tag is affixed to the vehicle’s windshield and is configured to securely

pass its recorded data to the smartphone via BLE for an enhanced, highly

accurate picture of each drive.

System Requirements

The system requires an iOS or Android smartphone that can connect to a

cellular network with a data plan. To minimize data plan usage, it is possible to select an option

within the app to upload trip data via Wi-Fi. If this option is selected, trip processing and data

availability may be delayed until the next time the app is connected to Wi-Fi.

The app requires access to Location Services to function properly. The app will ask for permission

to use Location Services. Users must allow Location Services to ensure correct performance of the

system.

For the Tag to be able to communicate with the smartphone, Bluetooth needs to be active during

each trip. Bluetooth must be enabled for the system to function properly, and the app will request

permission to use Bluetooth.

The Tag must be affixed properly in the vehicle using the provided adhesive backing tape to record

reliable data.

Overview

To use the system, you will need the enclosed Tag as well as a Bluetooth-enabled

smartphone with a recent operating system (Android or iOS).

Install the app, open it, and follow the on-screen prompts to register the app using the provided

activation code. Once registration is complete, you will need to activate the Tag by following the

prompts in the app.

Finally, you will need to affix the Tag securely in the vehicle using the tape on the back of the

device. CMT recommends placing the Tag on the center of the windshield, below the back of the

rear view mirror.

1

CONFIDENTIAL & PROPRIETARY

314 Main Street, Suite 1200 Cambridge, MA 02142

(800) 941-7177 cmtelematics.com

Tag Linking

To link a new Tag to your smartphone, do the following:

1. Ensure the device has a network connection and that Bluetooth is turned on.

2. Use the smartphone to launch the telematics app with the provided activation code.

3. Accept the app permissions you are prompted to accept, including Bluetooth and Location.

4. Select your vehicle from the list of vehicles displayed in the app. The app displays only

vehicles associated with you.

5. Press the button on the Tag to activate it from its shipping state. The telematics app on the

smartphone and the Tag communicate over BLE. The Tag’s MAC Address is sent to the

backend by the SDK via the Internet. In the backend, it is authenticated and linked to the

selected vehicle and to all user accounts associated with it.

Troubleshooting

If after activation you observe missing trips, make sure the phone is charged, the app is installed,

and Bluetooth and Location Services are enabled. While driving, ensure that there is no metal or

any kind of physical barrier (such as the glove compartment) in between your smartphone and the

Tag, which may disrupt connection.

The Tag is equipped with a light and a beeping sound that provides signals related to the health of

the Tag and the overall service:

•

If the Tag is in the process of activating, the Tag will blink its LED continuously. In this

case, the activation process is ongoing. Continue to follow the prompts in the app.

• To test the Tag’s battery, press the button once briefly. If the Tag shows one brief light,

the Tag is in good working condition. If no LED blink is observed, the Tag battery is too

low to operate and the Tag needs to be replaced.

•

If the Tag flashes, it is receiving a firmware upgrade.

• The Tag indicates the lack of a phone connection two minutes into a trip by beeping

three times.

2

CONFIDENTIAL & PROPRIETARY

314 Main Street, Suite 1200 Cambridge, MA 02142

(800) 941-7177 cmtelematics.com

Care & Safety

Make sure the Tag remains dry and follow the care instructions below:

• Never open the Tag.

•

If the battery in the Tag becomes low, request a replacement Tag.

• Wipe the Tag with a clean cloth. Should fluids enter the Tag, it may affect the functioning of

the Tag, and cause the Tag to need replacement.

Trademarks

Android is a trademark of Google, Inc.

iOS is a registered trademark of Cisco Systems, Inc, licensed to Apple, Inc.

Bluetooth is a registered trademark of Bluetooth SIG, Inc.

Other Disclaimers

DriveWell Tag manufactured by:

Cambridge Mobile Telematics

314 Main Street, Suite 1200

Cambridge, MA 02142

3

CONFIDENTIAL & PROPRIETARY

314 Main Street, Suite 1200 Cambridge, MA 02142

(800) 941-7177 cmtelematics.com

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

FCC statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

·If this equipment does cause harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more

of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

RF exposure warning

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

NOTE: Any changes or modifications not expressly approved by the grantee of this device could void the

user's authority to operate the equipment.

4

CONFIDENTIAL & PROPRIETARY

314 Main Street, Suite 1200 Cambridge, MA 02142

(800) 941-7177 cmtelematics.com

Date：2021-07-05

Federal Communications Commission

Authorization and Evaluation Division

FCC ID: 2AFGD000610

Confidentiality Request

Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant

hereby requests confidential treatment of information accompanying this

Application as outlined below:

Schematics

Block Diagram

Operational Description

1

2

3

The above materials contain trade secrets and proprietary information not

customarily released to the public. The public disclosure of these matters might be

harmful to the Applicant and provide unjustified benefits to its competitors.

The Applicant understands that pursuant to Rule 0.457, disclosure of this Application

and all accompanying documentation will not be made before the date of the Grant

for this application.

Sincerely,

Michael Benjamin / mbenjamin@cmtelematics.com

Cambridge Mobile Telematics

Cambridge Mobile Telematics 314 Main Street, Suite 1200, Cambridge Massachusetts United States United States We Name:

Address:

Country:

Declare that:

Agent Company name:

Address:

City:

Country is authorized to apply for Certification of the following product(s):

Product description:

Type designation: DriveWell Tag v6.1 DriveWell Tag DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park , Suzhou China Trademark:

FCC ID: 2AFGD000610 on our behalf. Date:

2021-07-05 Name:

Function: Vice President of IoT Michael Benjamin Signature:

Notes:

Required for FCC & IC application

Date: 2021-07-05 Federal Communications Commission Authorization and Evaluation Division FCC ID: 2AFGD000610 ATTESTATION FCC ID: 2AFGD000610 Product: DriveWell Tag Model: DriveWell Tag v6.1 We don't provide any controls or software to allow operation outside the USA frequency band when we sell this product in USA. Sincerely, __________________ Michael Benjamin / mbenjamin@cmtelematics.com Cambridge Mobile Telematics