Packaging List 1. CamFi Pro 2. 3200 mAH battery 3. Mini USB cable for connecting to the camera 4. Micro USB cable for charging the battery 5. Quick start guide CamFi Pro Overview Quick Start Guide CamFi Pro Power Battery Wi-Fi USB CamFi Limited USB port ON/OFF Charging port Reset Hot shoe screw Battery compartment Charging Battery Use the micro USB cable to connect to a mobile phone charger or the USB port of a computer to charge the battery of the CamFi device. Micro USB Connect to CamFi Pro USB Power Light Turned on when the system is starting up Battery Light The light is on when the battery is low. Wi-Fi Light The WiFi starts up normally, when the light is on. USB Light Turned on when the USB is connecting. Quick Installation 1. Connect CamFi Pro to your camera Connect the CamFi Pro device to your camera using the mini USB cable, then turn on the CamFi Pro and your camera. Get the CamFi app You will need to install the CamFi app on your smartphone or your PC. The CamFi app is available for iPhone, Android, Mac and Windows. For a full list of supported devices, visit:
http://www.cam-fi.com/download.html 1. On your smartphone or your computer browser, visit:
http://www.cam-fi.com/download.html 2. Follow the instructions to install the CamFi app on your smartphone or your computer. Connect to the Wi-Fi hotspot of the CamFi Pro After you turn on CamFi Pro and the system status indicator light turns a constant green, you can find and connect to the Wi-Fi hotspot of the CamFi Pro with the name prefixed with CamFi-Proon your smart phone or your computer. CamFi-Pro-xxxxxx Start CamFi App Launch the CamFi app on your smart phone or your computer. Firmware Upgrade The CamFi app will automatically check if there is a new version of firmware available for the CamFi Pro. When there is a new version available, the app will start the upgrade wizard to upgrade the firmware of the CamFi Pro. You can follow the instructions provided by the wizard to upgrade the firmware. Need Further Assistance?
For answers to common questions and troubleshooting steps, please visit:
http://www.cam-fi.com/support.html You can also contact us with the following contact information:
E-mail: support@cam-fi.com Address: A1002, Tsinghua Science Park, 1st College Road, Zhuhai, Guangdong, China Website: http://www.cam-fi.com FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
o Reorient or relocate the receiving antenna. o Increase the separation between the equipment and receiver. o Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. o Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be located or operating in conjunction with any other antenna or transmitter.