FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. 15.105 Information to the user.
(b) For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual:
Note: This equipment has been tested and found to comply with the limits for a Class B di These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. tincrease the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. cConsult the dealer or an experienced radio/TV technician for help. igital device, pursuant to part 15 of the FCC Rules. Preface Please read this owner's guide Please take the time to follow the instructions in owner's guide carefully. It will help you to properly use you new inCarBite's product and enjoy its features. please save this owner's guide for future reference ifany part of the product appears to be damaged, do not attempt to use it Contact your saller immediately. Contents Unpacking.. MS introduction. Power... Volume... Use AUX wired for audio. Use bluetooth wireless for audio.. Bluetooth functions MS support Cleaning....... Bluetooth specifications. Product specifications... Unpacking MS speaker 3.5mm stereo cable Mini USB cable specification MS introduc MS-304 Front System status indicators:
The yellow LED status indicator indicates charging status Yellow LED is on: Battery charging Yellow LED is off: Charging cycle done. Red LED is on : Battery is low. The Blue LED status indicator indicates Bluetooth status.(MS-302) MS-302 |
MS The holding foot for tablet device or mobile phone Prompt : please refer to"MS' supporting foots" chapter about how to use the supporting foots, for to enjoy the characteristic of the product, Buttons (MS-302) Cx Toe, ) IKK Previous/Volume=
O = Pilaystop DD] Next/Volume+
VOL+ AUX IN OFF ON DC 5V VOL: Increase and decrease volume. AUX IN: 3.5mm Audio Input OFF ON: Power Switch DC 5V: mini USB joggle for recharge Power Connect the mini-USB cable end to the mini-USB port of the speaker unit and the USB cable end connected to your Home wall USB charger adaptor or the USB port of your computer/notebook Volume Sound Volume adjustment Turning the VOL to add or reduce the sound volume output of the MS speaker, Remind : The sound volume can be adjusted via your Bluetooth device during bluetooth Bluetooth connection mode, (You are suggested to trun the volume switch of the MS speaker to maximum position; then you can adjust the sound volume to your desired level via the volume mode of your Bluetooth device and it will avoid the sound volume the possibility to be too low level to listen.) AUXIN audio source You can input the music from a music player as a portable digital music player to your MS speaker, Use the 3.5mm audio cable connects headphone of your music player in one end and the AUX-IN jack of the MS speakerin the other end Pairing with Bluetooth devices Pairing occurs when two Bluetooth devices communicate with each other and establish a connection. A record of information about this connection is then stored in the memory of each device. Once you pair a device with the MS speaker, you should not have to pair itagain With the Bluetooth device and the MS speaker both turned on, Form the Bluetooth device list, select the device named "inCarBite SD Bar. If your device asks fora passcode, enter digits 0000(four zeros) and press OK Bluetooth functions Songs change: press short the "previous" or "next" button on MS speaker Volume controls: press long the "Volume +" or "Volume -" button AnswerfEnd a call: when a mobile phone is connected with Bluetooth to the MS speaker (Bluetooth version), press short the "Play/Stop" button to. answer or hang up the call During phone conversation mode, press short the "previous" button and the "next" buttons together to start or close the Microphone function of the MS speaker; press long the previous button and the "next" buttons. together to run off or turn on the loudspeaker. Step1: Pull out the two Left and Right MS's supporting foots Step2: Dock your Tablet Device or mobile phone on the two holding slots. You can dock your Tablet device or photo frame on the two holding slots, The MS holding foots is designed to hold lighter device also like mobile phone,MP4 etc. Note: you can adjust the position of the two MS's holding foots to ablain diffefentviewing angle ot the device you dock in The design of the MS's holding foots is to uphold the speaker position facing at 15 degree when device is docked in the holding foots. This is to achieve a better viewing angle and a better sound transmission Cleaning To clean the exterior surface of your product, you can wipe it using a soft, dry cloth Do not use solvents, chemicals, or sprays Do not allow liquids to spill or objects to drop into any openings. Bluetooth specifications Prompt: when using MS speaker as a speakerphone, please note that MS speaker's built-in microphone only works while connected via Bluetooth. The MS speaker memory can hold up to four paired devices You can pair more than four devices, but the memory will never contain more than four. When the memory is full with four devices and an additional device is paired, the least recently used device is deleted from memory and replaced by the newly paired device Bluetooth status indicator:
Pairing: the red and blue LED light twinkle alternately, connecting a previously paired device: the blue LED light flick fast by 0,5 second on time. Connected: the blue LED light on Stand by: the blue LED light flick slowly, by 5 seconds on time Playing songs: the red and blue LED light flick together, by 5 seconds on time Callin: the blue LED light flick fast always In conversation: the red and blue LED light flick together, flick 3 times. fast each 3 seconds. Product specifications:
Battery life: About 8-10 hours(subject to the output volume level and the audio details) Loudspeaker: 2W *2 Output: 85 dB @0.5m Dimensions: 44mm H * 240mm W* 28mm D Weight: 218g(80z) Temperature range foruse: 0 - 45 C(32 113 F)
(Ms-302) Microphone: -55dB Bluetooth range: 15m